Surface-Assisted Selective Air Oxidation of Phosphines Adsorbed on Activated Carbon

Trialkyl- and triarylphosphines readily adsorb onto the surface of porous activated carbon (AC) even in the absence of solvents through van der Waals interactions between the lone electron pair and the AC surface. This process has been proven by solid-state NMR techniques. Subsequently, it is demonstrated that the AC enables the fast and selective oxidation of adsorbed phosphines to phosphine oxides at ambient temperature in air. In solution, trialkylphosphines are oxidized to a variety of P(V) species when exposed to the atmosphere, while neat or dissolved triarylphosphines cannot be oxidized with air. When the trialkyl- and triarylphosphines PnBu3 (1), PEt3, (2), PnOct3 (3), PMetBu2 (4), PCy3 (5), and PPh3 (6) are adsorbed in a mono- or submonolayer on the surface of AC, in the absence of a solvent and at ambient temperature, they are quantitatively oxidized to the adsorbed phosphine oxides, 1ox-6ox, once air is admitted. No formation of any unwanted P(V) side products or water adducts is observed. The phosphine oxides can then be recovered in good yields by washing them off of the AC. The oxidation is likely facilitated by a radical activation of molecular oxygen due to delocalized electrons on the aromatic surface coating of AC, as proven by ESR. This easy and inexpensive oxidation method renders hydrogen peroxide or other oxidizers unnecessary and is broadly applicable to sterically hindered and even to air-stable triarylphosphines. Phosphines adsorbed at lower surface coverages on AC oxidize at a faster rate. All oxidation reactions were monitored by solution- and solid-state NMR spectroscopy.

Reactions of Platinum Terminal Polyynyl Complexes trans-(C6F5)(p-tol3P)2Pt(C≡C)nH (n = 2-4) and n-BuLi, Generation of Functional Equivalents of Pt(C≡C)nLi Species, and Derivatization with Organic and Inorganic Electrophiles

Reactions of the title complexes and n-BuLi (1.5 equiv, -45 °C) afford functional equivalents of the deprotonated species trans-(C6F5)(p-tol3P)2Pt(C≡C)nLi (n = 2-4), as assayed by subsequent additions of MeI or Me3SiCl to give trans-(C6F5)(p-tol3P)2Pt(C≡C)nMe (66-52%) or trans-(C6F5)(p-tol3P)2Pt(C≡C)nSiMe3 (63-49%). However, 31P NMR data suggest more complicated mechanistic scenarios, and small amounts of the hydride complex trans-(C6F5)(p-tol3P)2PtH (independently synthesized from the chloride complex, AgClO4, and NaBH4) are detected in most cases. Analogous sequences involving trans-(C6F5)(p-tol3P)2Pt(C≡C)2H and benzyl bromide, D2O, or W(CO)6/Me3O+ BF4- similarly afford products with Pt(C≡C)2Bn, Pt(C≡C)2D, or Pt(C≡C)2C(OCH3)=W(CO)5 linkages. The crystal structures of the tungsten and corresponding SiMe3 adduct, the three Pt(C≡C)nMe species, and hydride complex are determined.

Tuning the Thermometric Features in 1D Luminescent EuIII and TbIII Coordination Polymers through Different Bridge Phosphine Oxide Ligands

Tb^III and Eu^III systems have been investigated as ratiometric luminescent temperature probes in luminescent coordination polymers due to Tb^III → Eu^III energy transfer (ET). To help understand how ion-ion separation, chain conformation as well as excitation channel impact their thermometric properties, herein, [Eu(tfaa)₃(μ-L)Tb(tfaa)₃]_n one-dimensional (1D) coordination polymers (tfaa^- = trifluoroacetylacetonate, and L = [(diphenylphosphoryl)R](diphenyl)phosphine oxide, R = ethyl - dppeo - or butyl - dppbo) were synthesized. The short μ-dppeo bridge ligand leads to a more linear 1D polymeric chain, while the longer μ-dppbo bridge leads to tighter packed chains. As the temperature rises from 80 K, upon direct Tb^III excitation at 488 nm, the Tb^III emission intensity decreases, while the Eu^III emission intensity increases after 160 and 200 K when L = dppeo or dppbo, respectively. The temperature-dependent emission intensities, due to Tb^III → Eu^III ET, enable the development of ratiometric luminescent temperature probes featuring maximum relative thermal sensitivity up to 3.8% K^-1 (250 K, L = dppbo, excitation at 488 nm). On the other hand, the same system displays maximum thermal sensitivity up to 3.5% K^-1 (323 K) upon ligand excitation at 300 nm. Thus, by changing the excitation channel and bridge ligand that leads to modification of the polymer conformations, the maximum relative thermal sensitivity can be tuned.

Interaction of N-nitrosamines with binuclear copper complexes for luminescent detection

Cu(I) from tetrakis(acetonitrile)copper(I) hexafluorophosphate ([Cu(MeCN)₄]PF₆) was complexed with five structurally related phosphines containing N-heterocycles. The interactions between the resulting complexes and some N-nitrosamines were studied using X-ray crystallography as well as emission spectroscopy. Upon complexation, three phosphine ligands bridge two Cu(I) centers to give paddlewheel type structures that displayed a range of emission wavelengths spanning the visible region. N-Nitrosodimethylamine (NDMA) was shown to coordinate to one of the two copper centers in some of the paddlewheel complexes in the solid state and this interaction also quenches their emissions in solution. The influence of the weakly coordinating anion on crystal and spectroscopic properties of one of the paddlewheel complexes was also examined using tetrakis(acetonitrile)copper(I) perchlorate ([Cu(MeCN)₄]ClO₄) as an alternative Cu(I) source. Similarly, copper(II) perchlorate hexahydrate (Cu(ClO₄)₂·6H₂O) was used for complexation to observe the impact of metal oxidation state on the two aforementioned properties. Lastly, the spectroscopic properties of the complex between Ph₂P(1-Isoquinoline) and Cu(I) was shown to exhibit solvent dependence when the counterion is ClO₄^-. These Cu(I) complexes are bench stable solids and may be useful materials for developing a fluorescence based detection method for N-nitrosamines.

Improving the accuracy of 31P NMR chemical shift calculations by use of scaling methods

Calculation of ³¹P NMR chemical shifts for a series of tri- and tetracoordinate phosphorus compounds using several basis sets and density functional theory (DFT) functionals gave a modest fit to experimental chemical shifts, but an excellent linear fit when plotted against the experimental values. The resultant scaling methods were then applied to a variety of "large" compounds previously selected by Latypov et al. and a set of stereoisomeric and unusual compounds selected here. No one method was best for all structural types. For compounds that contain P-P bonds and P-C multiple bonds, the Latypov et al. method using the PBE0 functional was best (mean absolute deviation/root mean square deviation (MAD/RMSD) = 6.9/8.5 ppm and 6.6/8.2 ppm, respectively), but for the full set of compounds gave higher deviations (MAD/RMSD = 8.2/12.3 ppm), and failed by over 60 ppm for a three-membered phosphorus heterocycle. Use of the M06-2X functional for both the structural optimization and NMR chemical shift calculation was best overall for the compounds without P-C multiple bonds (MAD/RMSD = 5.4/7.1 ppm), but failed by 30-49 ppm for compounds having any P-C multiple-bond character. Failures of these magnitudes have not been reported previously for these widely used functionals. These failures were then used to screen a variety of recommended functionals, leading to better overall methods for calculation of these chemical shifts: optimization with the M06-2X functional and NMR calculation with the PBE0 or ωB97x-D functionals gave values for MAD/RMSD = 6.9/8.5 ppm and 6.8/9.1 ppm, respectively, over an experimental chemical shift range of -181 to 356 ppm. Due to the unexplained failures observed, we recommend use of more than one method when looking at novel structures.

Molecular Dynamics and Surface Interactions of Nickelocene Adsorbed on Silica: A Paramagnetic Solid-State NMR Study

When grinding nickelocene with silica in the absence of a solvent at room temperature, it adsorbs on the surface within the pores. This has also been demonstrated visually by adsorbing green nickelocene in the pores of a large colorless silica gel specimen. While this dry adsorption and translational mobility of nickelocene within the pores is proven visually, the site-to-site mobility of the nickelocene molecules and their orientation toward the surface are not yet understood. In this contribution, mesoporous silica is used as the support material for a systematic solid-state NMR study of these issues. Paramagnetic ¹H VT solid-state NMR and T₁ relaxation times have been powerful tools for studying the dynamics of nickelocene on the silica surface. Herewith, the mobility of the surface-adsorbed nickelocene molecules in the pores could be quantified on the molecular scale. According to the obtained data, the nickelocene molecules move like a liquid on the surface. Isotropically moving molecules exchange places rapidly with surface-attached molecular states of nickelocene in a sample with submonolayer surface coverage. This finding is corroborated by a macroscopic visualization experiment. The states of the surface-attached horizontally oriented nickelocene molecules that are prevalent at temperatures below 200 K have been quantified. The temperature dependencies of the rate k in coordinates of ln(k) versus 1/T and ln(k/T) versus 1/T form ideal straight lines that allow the determination of the kinetic parameters E_act = 5.5 kcal/mol, A = 1.1 × 10¹⁰, ΔH^‡ = 5.0 kcal/mol, and ΔS^‡ = -15 eu. Investigating a sample with equal amounts of nickelocene and ferrocene in a submonolayer amount of 80% overall surface coverage shows that the different metallocenes mix on the molecular level on the silica surface.

Comparison of Proton Acceptor and Proton Donor Properties of H2O and H2O2 in Organic Crystals of Drug-like Compounds: Peroxosolvates vs. Crystallohydrates

Two new peroxosolvates of drug-like compounds were synthesized and studied by a combination of X-ray crystallographic, Raman spectroscopic methods, and periodic DFT computations. The enthalpies of H-bonds formed by hydrogen peroxide (H₂O₂) as a donor and an acceptor of protons were compared with the enthalpies of analogous H-bonds formed by water (H₂O) in isomorphic (isostructural) hydrates. The enthalpies of H-bonds formed by H₂O₂ as a proton donor turned out to be higher than the values of the corresponding H-bonds formed by H₂O. In the case of H₂O₂ as a proton acceptor in H-bonds, the ratio appeared reversed. The neutral O∙∙∙H-O/O∙∙∙H-N bonds formed by the lone electron pair of the oxygen atom of water were the strongest H-bonds in the considered crystals. In the paper, it was found out that the low-frequency Raman spectra of isomorphous crystalline hydrate and peroxosolvate of N-(5-Nitro-2-furfurylidene)-1-aminohydantoin are similar. As for the isostructural hydrate and peroxosolvate of the salt of protonated 2-amino-nicotinic acid and maleic acid monoanion, the Raman spectra are different.

Kinetic Resolution in Transannular Morita-Baylis-Hillman Reaction: An Approximation to the Synthesis of Sesquiterpenes from Guaiane Family

An approximation to the synthesis of several sesquiterpenes from the Guaiane family is described in which the core structure was obtained through a transannular Morita-Baylis-Hillman reaction performed under kinetic resolution. Several manipulations of the obtained MBH adduct have been carried out directed towards the total synthesis of γ-Gurjunene, to the formal synthesis of Clavukerin A, to the synthesis of a non-natural isomer of isoguaiane and to the synthesis of an advanced intermediate in the total synthesis of Palustrol.

Phosphine oxides as NMR and IR spectroscopic probes for geometry and energy of PO···H–A hydrogen bonds

In this work we evaluate the possibility to use the NMR and IR spectral properties of P=O group to estimate the geometry and strength of hydrogen bonds which it forms...

Involvement of 5f Orbitals in the Covalent Bonding between the Uranyl Ion and Trialkyl Phosphine Oxide: Unraveled by Oxygen K-Edge X-ray Absorption Spectroscopy and Density Functional Theory

Monodentate organophosphorus ligands have been used for the extraction of the uranyl ion (UO₂²⁺) for over half a century and have exhibited exceptional extractability and selectivity toward the uranyl ion due to the presence of the phosphoryl group (O═P). Tributyl phosphate (TBP) is the extractant of the world-renowned PUREX process, which selectively recovers uranium from spent nuclear fuel. Trialkyl phosphine oxide (TRPO) shows extractability toward the uranyl ion that far exceeds that for other metal ions, and it has been used in the TRPO process. To date, however, the mechanism of the high affinity of the phosphoryl group for UO₂²⁺ remains elusive. We herein investigate the bonding covalency in a series of complexes of UO₂²⁺ with TRPO by oxygen K-edge X-ray absorption spectroscopy (XAS) in combination with density functional theory (DFT) calculations. Four TRPO ligands with different R substituents are examined in this work, for which both the ligands and their uranyl complexes are crystallized and investigated. The study of the electronic structure of the TRPO ligands reveals that the two TRPO molecules, irrespective of their substituents, can engage in σ- and π-type interactions with U 5f and 6d orbitals in the UO₂Cl₂(TRPO)₂ complexes. Although both the axial (O_yl) and equatorial (O_eq) oxygen atoms in the UO₂Cl₂(TRPO)₂ complexes contribute to the X-ray absorption, the first pre-edge feature in the O K-edge XAS with a small intensity is exclusively contributed by O_eq and is assigned to the transition from O_eq 1s orbitals to the unoccupied molecular orbitals of 1b_1u + 1b_2u + 1b_3u symmetries resulting from the σ- and π-type mixing between U 5f and O_eq 2p orbitals. The small intensity in the experimental spectra is consistent with the small amount of O_eq 2p character in these orbitals for the four UO₂Cl₂(TRPO)₂ complexes as obtained by Mulliken population analysis. The DFT calculations demonstrate that the U 6d orbitals are also involved in the U-TRPO bonding interactions in the UO₂Cl₂(TRPO)₂ complexes. The covalent bonding interactions between TRPO and UO₂²⁺, especially the contributions from U 5f orbitals, while appearing to be small, are sufficiently responsible for the exceptional extractability and selectivity of monodentate organophosphorus ligands for the uranyl ion. Our results provide valuable insight into the fundamental actinide chemistry and are expected to directly guide actinide separation schemes needed for the development of advanced nuclear fuel cycle technologies.

Di(hydroperoxy)adamantane adducts: synthesis, characterization and application as oxidizers for the direct esterification of aldehydes

The di(hydroperoxy)adamantane adducts of water (1) and phosphine oxides p-Tol₃PO·(HOO)₂C(C₉H₁₄) (2), o-Tol₃PO·(HOO)₂C(C₉H₁₄) (3), and Cy₃PO·(HOO)₂C(C₉H₁₄) (4), as well as a CH₂Cl₂ adduct of a phosphole oxide dimer (8), have been created and investigated by multinuclear NMR spectroscopy, and by Raman and IR spectroscopy. The single crystal X-ray structures for 1-4 and 8 are reported. The IR and ³¹P NMR data are in accordance with strong hydrogen bonding of the di(hydroperoxy)adamantane adducts. The Raman ν(O-O) stretching bands of 1-4 prove that the peroxo groups are present in the solids. Selected di(hydroperoxy)alkane adducts, in combination with AlCl₃ as catalyst, have been applied for the direct oxidative esterification of n-nonyl aldehyde, benzaldehyde, p-methylbenzaldehyde, p-bromobenzaldehyde, and o-hydroxybenzaldehyde to the corresponding methyl esters. The esterification takes place in an inert atmosphere, under anhydrous and oxygen-free conditions, within a time frame of 45 minutes to 5 hours at room temperature. Hereby, two oxygen atoms per adduct assembly are active with respect to the quantitative transformation of the aldehyde into the ester.

Desymmetrization Approach to the Synthesis of Optically Active P-Stereogenic Phosphin-2-en-4-ones

Two synthetic protocols for the conversion of 1-phenylphosphinan-4-ones to novel P-stereogenic 1-phenylphosphin-2-en-4-ones by enantioselective deprotonation followed by oxidation and by asymmetric organocatalytic halogenation accompanied by elimination have been developed. These two-step one-pot transformations provide convenient access to optically active 1-phenylphosphin-2-en-4-one 1-sulfide and 1-phenylphosphin-2-en-4-one 1-oxide of 96 and 55% enantiomeric purities, respectively.

Actual Symmetry of Symmetric Molecular Adducts in the Gas Phase, Solution and in the Solid State

This review discusses molecular adducts, whose composition allows a symmetric structure. Such adducts are popular model systems, as they are useful for analyzing the effect of structure on the property selected for study since they allow one to reduce the number of parameters. The main objectives of this discussion are to evaluate the influence of the surroundings on the symmetry of these adducts, steric hindrances within the adducts, competition between different noncovalent interactions responsible for stabilizing the adducts, and experimental methods that can be used to study the symmetry at different time scales. This review considers the following central binding units: hydrogen (proton), halogen (anion), metal (cation), water (hydrogen peroxide).

Efficient capturing of hydrogen peroxide in dilute aqueous solution by co-crystallization with amino acids

X-ray structure analyses of co-crystals of H2O2 and l-Phe, dl-Phe, or dl-Asp prepared in a dilute aqueous solution (30 wt%) indicated that multi-layer motifs including water molecule is important for highly efficient H2O2 capture in dilute solutions.

Crystalline Peroxosolvates: Nature of the Coformer, Hydrogen-Bonded Networks and Clusters, Intermolecular Interactions

Despite the technological importance of urea perhydrate (percarbamide) and sodium percarbonate, and the growing technological attention to solid forms of peroxide, fewer than 45 peroxosolvates were known by 2000. However, recent advances in X-ray diffractometers more than tripled the number of structurally characterized peroxosolvates over the last 20 years, and even more so, allowed energetic interpretation and gleaning deeper insight into peroxosolvate stability. To date, 134 crystalline peroxosolvates have been structurally resolved providing sufficient insight to justify a first review article on the subject. In the first chapter of the review, a comprehensive analysis of the structural databases is carried out revealing the nature of the co-former in crystalline peroxosolvates. In the majority of cases, the coformers can be classified into three groups: (1) salts of inorganic and carboxylic acids; (2) amino acids, peptides, and related zwitterions; and (3) molecular compounds with a lone electron pair on nitrogen and/or oxygen atoms. The second chapter of the review is devoted to H-bonding in peroxosolvates. The database search and energy statistics revealed the importance of intermolecular hydrogen bonds (H-bonds) which play a structure-directing role in the considered crystals. H2O2 always forms two H-bonds as a proton donor, the energy of which is higher than the energy of analogous H-bonds existing in isostructural crystalline hydrates. This phenomenon is due to the higher acidity of H2O2 compared to water and the conformational mobility of H2O2. The dihedral angle H-O-O-H varies from 20 to 180° in crystalline peroxosolvates. As a result, infinite H-bonded 1D chain clusters are formed, consisting of H2O2 molecules, H2O2 and water molecules, and H2O2 and halogen anions. H2O2 can form up to four H-bonds as a proton acceptor. The third chapter of the review is devoted to energetic computations and in particular density functional theory with periodic boundary conditions. The approaches are considered in detail, allowing one to obtain the H-bond energies in crystals. DFT computations provide deeper insight into the stability of peroxosolvates and explain why percarbamide and sodium percarbonate are stable to H2O2/H2O isomorphic transformations. The review ends with a description of the main modern trends in the synthesis of crystalline peroxosolvates, in particular, the production of peroxosolvates of high-energy compounds and mixed pharmaceutical forms with antiseptic and analgesic effects.

Diastereoselective Synthesis of P-Stereogenic Secondary Phosphine Oxides (SPOs) Bearing a Chiral Substituent by Ring Opening of (+)-Limonene Oxide with Primary Phosphido Nucleophiles

Kinetic separation of the commercially available cis/trans-(+)-limonene oxide mixture by ring opening with primary phosphido nucleophiles LiPHR (R = ferrocenyl, Ph, Cy, t-Bu, Mes* (Mes* = 2,4,6-(t-Bu)₃C₆H₂)), followed by treatment with aqueous NH₄Cl and H₂O₂, gave unreacted cis-(+)-limonene oxide and diastereoenriched mixtures of the secondary phosphine oxides (SPOs) PHR(trans-(+)-Lim-OH)(O), which could be separated by chromatography and/or recrystallization. This one-pot synthesis uses a cheap chiral material and commercially available primary phosphines to control the configuration of the new P-stereogenic SPOs, which are potentially useful as ligands for metal complexes in asymmetric catalysis.

For Whom a Puddle Is the Sea? Adsorption of Organic Guests on Hydrated MCM-41 Silica

Thermal and hydration effects on the mobility of compact and branched organic molecules and a bulky pharmaceutical substance loaded in submonolayer amounts onto mesoporous silica have been elucidated using ¹H and ³¹P solid-state NMR. In all cases, the ambient hydration has a stronger effect than an increase in temperature to 370 K for water-free silica. The effect of hydration depends on the guest and ranges from complete solvation to a silica-water-guest sandwich structure to a silica-guest/silica-water pattern. The mobility of the guests under different conditions has been described. The specific structure of the MCM-41 surface allows one to study very slow surface diffusion, a diffusivity of about 10^-15-10^-16 m²/s. The data reported are relevant to any nonfunctionalized silica, while the method used is applicable to any phosphor-containing guest on any host.

Di(hydroperoxy)cycloalkane Adducts of Triarylphosphine Oxides: A Comprehensive Study Including Solid-State Structures and Association in Solution

Four new di(hydroperoxy)cycloalkane adducts (Ahn adducts) of p-Tol₃PO (1) and o-Tol₃PO (2), namely, p-Tol₃PO·(HOO)₂C(CH₂)₅ (3), o-Tol₃PO·(HOO)₂C(CH₂)₅ (4), p-Tol₃PO·(HOO)₂C(CH₂)₆ (5), and o-Tol₃PO·(HOO)₂C(CH₂)₆ (6), have been synthesized and fully characterized. Their single crystal X-ray structures have been determined and analyzed. The ³¹P NMR data are in accordance with hydrogen bonding of the di(hydroperoxy)alkanes to the P═O groups of the phosphine oxides. Due to their high solubility in organic solvents, natural abundance ¹⁷O NMR spectra of 1-6 could be recorded, providing the signals for the P═O groups and additionally the two different oxygen nuclei in the O-OH groups in the adducts 3-6. The association and mobility of 3-6 were explored by ¹H DOSY (diffusion ordered spectroscopy) NMR, which indicated persistent hydrogen bonding of the adducts in solution. Competition experiments with phosphine oxides allowed ranking of the affinities of the di(hydroperoxy)cycloalkanes for the different phosphine oxide carriers. On the basis of variable temperature ³¹P NMR investigations, the Gibbs energies of activation ΔG^‡ for the adduct dissociation processes of 3-6 at different temperatures, as well as the enthalpy ΔH^‡ and entropy ΔS^‡ of activation, have been determined. IR spectroscopy of 3-6 corroborated the hydrogen bonding, and in the Raman spectra, the ν(O-O) stretching bands have been identified, confirming the presence of peroxy groups in the solid materials. The high solubilities in selected organic solvents have been quantified.

Synthesis and group 9 complexes of macrocyclic PCP and POCOP pincer ligands

The synthesis of macrocyclic variants of commonly employed phosphine-based pincer (pro)ligands derived from meta-xylene (PCP-14) and resorcinol (POCOP-14) is described, where the P-donors are trans-substituted with a tetradecamethylene linker. The former was accomplished using a seven-step asymmetric procedure involving (-)-cis-1-amino-2-indanol as a chiral auxiliary and ring-closing olefin metathesis. A related, but non-diastereoselective route was employed for the latter, which consequently necessitated chromatographic separation from the cis-substituted by-product. The proligands are readily metalated and homologous series of M^I(CO) and M^IIICl₂(CO) derivatives (M = Rh, Ir) have been isolated and fully characterised in solution and the solid state. Metal hydride complexes are generated during the synthesis of the former and have been characterised in situ using NMR spectroscopy.

Disentangling different modes of mobility for triphenylphosphine oxide adsorbed on alumina

Triphenylphosphine oxide (TPPO, 1) has been adsorbed on neutral alumina by dry grinding of the components in the absence of a solvent. The adsorption proves translational mobility of 1 on the surface of alumina. Different surface coverages from a densely packed monolayer (99% coverage) to a dilute sub-monolayer (25%) have been produced. The samples have been studied by diverse multinuclear ¹H, ¹³C, and ³¹P variable temperature solid-state nuclear magnetic resonance (NMR) techniques. The interactions of 1 with the surface are determined by hydrogen bonding of the P=O group to OH groups on the surface. The ³¹P solid-state NMR spectra prove that even at low temperatures, the molecules of 1 are highly mobile on the surface. Using T₁ and T₂ relaxation time analyses of the ³¹P resonance in the solid state at variable temperatures allowed the identification and quantification of two different modes of mobility. Besides the translational mobility that consists of jumps from one hydrogen-bonding OH site on the surface to an adjacent one, a rotational movement around the axis defined by the P=O group of 1 occurs.

Hydrogen peroxide adducts of triarylphosphine oxides

Five new hydrogen peroxide adducts of phosphine oxides (p-Tol₃PO·H₂O₂)₂ (1), (o-Tol₃PO·H₂O₂)₂ (2), (o-Tol₂PhPO·H₂O₂)₂ (3), (p-Tol₃PO)₂·H₂O₂ (4), and (o-TolPh₂PO)₂·H₂O₂ (5), and the water adduct (o-Tol₂PhPO·H₂O)₂ (6) have been synthesized and fully characterized. Their single crystal X-ray structures have been determined and analyzed. The IR and ³¹P NMR data are in accordance with strong hydrogen bonding of the hydrogen peroxide. The mono- versus dimeric nature of the adduct assemblies has been investigated by DOSY NMR experiments. Raman spectroscopy of the symmetric adducts and the ν(O-O) stretching bands confirm the presence of hydrogen-bonded hydrogen peroxide in the solid materials. The solubilities in organic solvents have been quantified. Due to the high solubilities of 1-6 in organic solvents their ¹⁷O NMR spectra could be recorded in natural abundance, providing well-resolved signals for the P[double bond, length as m-dash]O and O-O groups. The adducts 1-5 have been probed regarding their stability in solution at 105 °C. The decomposition of the adduct 1 takes place by loss of the active oxygen atoms in two steps.

Structures and Dynamics of Secondary and Tertiary Alkylphosphine Oxides Adsorbed on Silica

The three secondary phosphine oxides [CH₂ =CH(CH₂ )₄ ]₂ HPO (1), [CH₂ =CH(CH₂ )₅ ]₂ HPO (2), and [CH₂ =CH(CH₂ )₆ ]₂ HPO (3), and two diphosphine dioxides, {[CH₂ =CH(CH₂ )₆ ]₂ PO(CH₂ )₇ }₂ (4) and {[CH₂ =CH(CH₂ )₆ ]₂ PO(CH₂ )₄ }₂ (5), incorporating long methylene chains, are described. The single crystal X-ray structures of 1, 2, and 5 have been determined. The phosphine oxides 3, 4, and 5 have been adsorbed on silica in submonolayer quantities to give 3 a-5 a. The ¹ H, ¹³ C, and ³¹ P solid-state NMR spectra of polycrystalline 3-5 have been analyzed and compared with those of 3 a-5 a. The changes of the solid-state NMR characteristics upon adsorption and the surface mobilities of the phosphine oxides are discussed.

Electrodeposition of indium from the ionic liquid trihexyl(tetradecyl)phosphonium chloride

The electrochemical behavior of indium in the ionic liquid trihexyl(tetradecyl)phosphonium chloride (Cyphos IL 101) was studied. Cyphos IL 101 first had to be purified, as the impurities present in commercial Cyphos IL 101 interfered with the electrochemical measurements. Electrochemical deposition of indium metal from this electrolyte occurs without hydrogen evolution, increasing the cathodic current efficiency compared to deposition from water and avoiding porosity within the deposited metal. Indium(iii) is the most stable oxidation state in the ionic liquid. This ion is reduced in two steps, first from indium(iii) to indium(i) and subsequently to indium(0). The high thermal stability of Cyphos IL 101 allowed the electrodeposition of indium at 120 °C and 180 °C. At 180 °C indium was deposited as liquid indium which allows for the easy separation of the indium and the possibility to design a continuous electrowinning process. On molybdenum, indium deposits as liquid droplets even below the melting point of indium. This was explained by the combination of melting point depression and undercooling. The possibility to separate indium from iron and zinc by electrodeposition was tested. It is possible to separate indium from zinc by electrodeposition, but iron deposits together with indium.

Selective synthesis and stabilization of peroxides via phosphine oxides

MEKPO (methyl ethyl ketone peroxide) and other peroxides can be synthesized selectively and stabilized as hydrogen-bonded phosphine oxide adducts.

Unusual isomorphism in crystals of organic solvates with hydrazine and water

Unusual isomorphism and isomorphous substitution in crystals of organic solvates with hydrazine and water are observed for the first time.

Rational design of time-resolved turn-on fluorescence sensors: exploiting delayed fluorescence for hydrogen peroxide sensing

Weakly emissive phosphine compounds, which contain a carbazolyl donor-triarylboryl acceptor luminophore, become strongly delayed fluorescent upon changes to their oxide forms. Time-gated acquisition of the fluorescence signals of phosphine in the presence of H2O2 and a competitive fluorescence dye allow for detection of H2O2 with elimination of short-lived fluorescence noise.

Phosphine oxide-based tricarbonylrhenium(i) complexes from phosphine/phosphine oxide and dihydroxybenzoquinones

Neutral phosphine oxide (P[double bond, length as m-dash]O) donor-based organometallic complexes [{Re(CO)3O[double bond, length as m-dash]PCy3}{μ-DHBQ}{Re(CO)3O[double bond, length as m-dash]PCy3}] (1), [{Re(CO)3O[double bond, length as m-dash]PPh3}{μ-DHBQ}{Re(CO)3O[double bond, length as m-dash]PPh3}] (2), [{Re(CO)3O[double bond, length as m-dash]PCy3}{μ-THQ}{Re(CO)3O[double bond, length as m-dash]PCy3}] (3), [{Re(CO)3O[double bond, length as m-dash]PPh3}{μ-THQ}{Re(CO)3O[double bond, length as m-dash]PPh3}] (4), [{Re(CO)3O[double bond, length as m-dash]PCy3}{μ-CA}{Re(CO)3O[double bond, length as m-dash]PCy3}] (5), and [{Re(CO)3O[double bond, length as m-dash]PPh3}{μ-CA}{Re(CO)3O[double bond, length as m-dash]PPh3}] (6) were assembled from phosphine/phosphine oxide, a dihydroxybenzoquinone donor and Re2(CO)10via a one-pot solvothermal approach. The soft phosphine donor was transformed into a hard phosphine oxide donor during the formation of 1, 3, 4, 5, and 6. The complexes 1-6 were air and moisture stable and were soluble in polar organic solvents. The complexes were characterized by elemental analysis, FT-IR, and NMR spectroscopic methods. The molecular structures of 1, 2, 4, and 6 were analyzed by single-crystal X-ray diffraction analysis. The UV-Visible absorption studies indicated that 1-6 in THF display strong visible light absorption in the range of ∼350-700 nm.

Mechanism of H2O2 Decomposition by Triphenylphosphine Oxide

A decomposition mechanism of H₂O₂ by triphenylphosphine oxide (TPPO) is presented. TPPO is often incorporated in proton-exchange membrane electrolytes as a moiety to inhibit the H₂O₂-induced degradation of the membranes. However, it has not been revealed how TPPO decreases the concentration of free H₂O₂ in the membranes. Following the experimental X-ray structures, the TPPO dimer capturing two H₂O₂ molecules was used as the calculation model. The vibrational spectrum calculations for various hydration numbers show that this model correctly reproduces the spectral peaks of TPPO capturing H₂O₂. On the basis of this model, the H₂O₂ decomposition mechanism by the TPPO dimer was searched. It was consequently found that this reaction proceeds through three steps: (1) Hydrogen transfer from H₂O₂ to the P=O bond of TPPO, (2) Hydrogen transfer from the -OOH group to the -OH group, and (3) O-O bond formation between O₂ groups. The calculated vibrational spectra for the reactants and intermediates indicated that the first and second steps are activated by vibrational excitations. Moreover, the third step giving low barrier heights is considered to proceed through two reaction paths: directly producing the O₂ molecule or going through an HOOOH intermediate. Interestingly, this reaction mechanism was found to use the violation of the octet rule for the P=O double bond, resulting in the strong H₂O₂ binding of TPPO.

Synthesis, characterization and mass-spectrometric analysis of [LSn(IV)F4−x]x+ salts [L = tris ((1-ethyl-benzoimidazol-2-yl)methyl)amine, x = 1–4]

A series of cationic tin fluoride complexes has been synthesized by successive fluoride abstraction from SnF₄ with TMSOTf in the presence of the tetradentate nitrogen donor BIMEt₃.

Thermal stability of trihexyl(tetradecyl)phosphonium chloride

The thermal stability of the ionic liquid Cyphos IL 101 was investigated under various experimental conditions for possible high-temperature applications.

Crystal structure of (Z)-N-benzyl-idene-1-phenyl-methanamine oxide hydrogen peroxide monosolvate

The title structure consists of a (Z)-N-benzyl­idene-1-phenyl­methanamine oxide and a hydrogen peroxide mol­ecule linked through both O—H groups into a one-dimensional chain structure.

The title adduct, C₁₄H₁₃NO·H₂O₂, consists of (Z)-N-benzyl­idene-1-phenyl­methanamine oxide and hydrogen peroxide mol­ecules in a 1:1 ratio. The organic coformer adopts a skew geometry with an inter-aryl-ring dihedral angle of 81.9 (2)°. In the crystal, the organic and peroxide mol­ecules are linked through both peroxide O—H donor groups to oxide O-atom acceptors, giving one-dimensional chains extending along the b axis. Present also are weak inter­molecular C—H⋯O hydrogen-bonding inter­actions.

Photochemical Water-Splitting with Organomanganese Complexes

Certain organometallic chromophores with water-derived ligands, such as the known [Mn(CO)₃(μ₃-OH)]₄ (1) tetramer, drew our attention as possible platforms to study water-splitting reactions. Herein, we investigate the UV irradiation of various tricarbonyl organomanganese complexes, including 1, and demonstrate that dihydrogen, CO, and hydrogen peroxide form as products in a photochemical water-splitting decomposition reaction. The organic and manganese-containing side products are also characterized. Labeling studies with ¹⁸O-1 suggest that the source of oxygen atoms in H₂O₂ originates from free water that interacts with 1 after photochemical dissociation of CO (1-CO) constituting the oxidative half-reaction of water splitting mediated by 1. Hydrogen production from 1 is the result of several different processes, one of which involves the protons derived from the hydroxido ligands in 1 constituting the reductive half-reaction of water splitting mediated by 1. Other processes that generate H₂ are also operative and are described. Collectively the results from the photochemical decomposition of 1 provide an opportunity to propose a mechanism, and it is discussed within the context of developing new strategies for water-splitting reactions with organomanganese complexes.

Rhodium(i) diphenylphosphine complexes supported on porous organic polymers as efficient and recyclable catalysts for alkene hydrogenation

Highly stable, chemoselective and recyclable immobilized Rh(i) homogeneous catalysts for alkene hydrogenation.