Tricompartmental Microcarriers with Controlled Release for Efficient Management of Parkinson's Disease

Parkinson's is a progressive neurodegenerative disease of the nervous system. It has no cure, but its symptoms can be managed by supplying dopamine artificially to the brain.This work aims to engineer tricompartmental polymeric microcarriers by electrohydrodynamic cojetting technique to encapsulate three PD (Parkinson's disease) drugs incorporated with high encapsulation efficiency (∼100%) in a single carrier at a fixed drug ratio of 4:1:8 (Levodopa (LD): Carbidopa(CD): Entacapone (ENT)). Upon oral administration, the drug ratio needs to be maintained during subsequent release from microparticles to enhance the bioavailability of primary drug LD. This presents a notable challenge, as the three drugs vary in their aqueous solubility (LD > CD > ENT). The equilibrium of therapeutic release was achieved using a combination of FDA-approved polymers (PLA, PLGA, PCL, and PEG) and the disc shape of particles. In vitro studies demonstrated the simultaneous release of all the three therapeutics in a sustained and controlled manner. Additionally, pharmacodynamics and pharmacokinetics studies in Parkinson's disease rats induced by rotenone showed a remarkable improvement in PD conditions for the microparticles-fed rats, thereby showing a great promise toward efficient management of PD.

3D jet writing of mechanically actuated tandem scaffolds

The need for high-precision microprinting processes that are controllable, scalable, and compatible with different materials persists throughout a range of biomedical fields. Electrospinning techniques offer scalability and compatibility with a wide arsenal of polymers, but typically lack precise three-dimensional (3D) control. We found that charge reversal during 3D jet writing can enable the high-throughput production of precisely engineered 3D structures. The trajectory of the jet is governed by a balance of destabilizing charge-charge repulsion and restorative viscoelastic forces. The reversal of the voltage polarity lowers the net surface potential carried by the jet and thus dampens the occurrence of bending instabilities typically observed during conventional electrospinning. In the absence of bending instabilities, precise deposition of polymer fibers becomes attainable. The same principles can be applied to 3D jet writing using an array of needles resulting in complex composite materials that undergo reversible shape transitions due to their unprecedented structural control.

Multicompartment Polymeric Nanocarriers for Biomedical Applications

Multicompartment polymeric nanocarriers which mimic the compartmentalized architecture of living cells have received considerable research attention in the biomedical field. The advancement of synthetic polymeric chemistry has allowed multicompartment polymeric nanocarriers to be tailored for biomedical applications such as drug delivery, encapsulated catalysis, and artificial cellular mimics. In this review, polymer-based multicompartment nanocarriers (multicompartment micelles, multicompartment polymersomes, and capsosomes) have been discussed. This review focuses on multicompartment systems applied to biomedical applications over the last ten years. The synthetic procedures and structural properties that impact the specific application are also highlighted.

Compartmentalized Microhelices Prepared via Electrohydrodynamic Cojetting

Anisotropically compartmentalized microparticles have attracted increasing interest in areas ranging from sensing, drug delivery, and catalysis to microactuators. Herein, a facile method is reported for the preparation of helically decorated microbuilding blocks, using a modified electrohydrodynamic cojetting method. Bicompartmental microfibers are twisted in situ, during electrojetting, resulting in helical microfibers. Subsequent cryosectioning of aligned fiber bundles provides access to helically decorated microcylinders. The unique helical structure endows the microfibers/microcylinders with several novel functions such as translational motion in response to rotating magnetic fields. Finally, microspheres with helically patterned compartments are obtained after interfacially driven shape shifting of helically decorated microcylinders.

Synthesis of Polystyrene Particles with Precisely Controlled Degree of Concaveness

Shape is an essential property of polymeric particles. Herein, we propose a simple method to synthesize polymeric particles with a well-controlled concave shape. Our method takes advantage of the powerful seeded emulsion polymerization strategy with the well-known principle of "like dissolves like" in solvent chemistry. We first prepared polystyrene (PS) particles with a single dimple by seeded emulsion polymerization. Then the dimpled PS particles were dispersed in a dimethylformamide (DMF) and water mixture. Consequently, the non-crosslinked polymer chains inside the particle were dissolved by DMF, a good solvent for PS, and the PS chains migrated out of the particle, causing buckling of the dimple and enlargement of the concave. By systematic change of the fraction of DMF in the solvent mixture, we changed the amount of the dissolved PS chains, and achieved polymeric particles with precisely tuned degree of concaveness. These concave particles were found to readily self-assemble, driven by polymer-induced depletion interaction. The concave PS particles reported here provide potential building blocks for self-assembled polymeric materials, and new model systems for condensed matter research.

Janus and Strawberry-like Particles from Azo Molecular Glass and Polydimethylsiloxane Oligomer

This study investigated Janus and strawberry-like particles composed of azo molecular glass and polydimethylsiloxane (PDMS) oligomer, focusing on controllable fabrication and formation mechanism of these unique structures and morphologies. Two materials, the azo molecular glass (IA-Chol) and PDMS oligomer (H₂pdca-PDMS), were prepared for this purpose. The Janus and strawberry-like particles were obtained from the droplets of a dichloromethane (DCM) solution containing both IA-Chol and H₂pdca-PDMS, dispersed in water and stabilized by poly(vinyl alcohol). Results show that the structured particles are formed through segregation between the two components induced by gradual evaporation of DCM from the droplets, which is controlled by adding ethylene glycol (EG) into the above dispersion. Without the addition of EG, Janus particles are formed through the full segregation of the two components in the droplets. On the other hand, with the existence of EG in the dispersion, strawberry-like particles instead of Janus particles are formed in the phase separation process. The diffusion of EG molecules from the dispersion medium into the droplets causes the PDMS phase deswelling in the interfacial area due to the poor solvent effect. Caused by the surface coagulation, the coalescence of the isolated IA-Chol domains is jammed in the shell region, which results in the formation of the strawberry-like particles. For the particles separated from the dispersion and dried, the PDMS oligomer phase of the Janus particles can adhere and spread on the substrate to form unique "particle-on-pad" morphology due to its low surface energy and swelling ability, while the strawberry-like particles exist as "standstill" objects on the substrates. Upon irradiation with a linearly polarized laser beam at 488 nm, the azo molecular glass parts in the particles are significantly deformed along the light polarization direction, which show unique and distinct morphologies for these two types of the particles.

Janus Particle Synthesis, Assembly, and Application

Janus particles are colloidal particles with more than a single type of surface chemistry or composition, ranging in size from hundreds of nanometers to a few micrometers. Like traditional colloids, they are large enough to be observed under optical microscopy in real time and small enough to diffuse by Brownian motion, but their interesting and useful new properties of directional interaction bring new research opportunities to the fields of soft matter and fundamental materials research as well as to applications in other disciplines and in technologies such as electronic paper and other multiphase engineering. In this review, a variety of methods that have been used to synthesize Janus particles are introduced. Following this, we summarize the use of Janus particles as basic units that assemble into novel structures and tune important material properties. The concluding sections highlight some of the technological applications, including recent progress in using Janus particles as microprobes, micromotors, electronic paper, and solid surfactants.

Recent advances in engineering microparticles and their nascent utilization in biomedical delivery and diagnostic applications

Complex microparticles (MPs) bearing unique characteristics such as well-tailored sizes, various morphologies, and multi-compartments have been attempted to be produced by many researchers in the past decades. However, a conventionally used method of fabricating MPs, emulsion polymerization, has a limitation in achieving the aforementioned characteristics and several approaches such as the microfluidics-assisted (droplet-based microfluidics and flow lithography-based microfluidics), electrohydrodynamics (EHD)-based, centrifugation-based, and template-based methods have been recently suggested to overcome this limitation. The outstanding features of complex MPs engineered through these suggested methods have provided new opportunities for MPs to be applied in a wider range of applications including cell carriers, drug delivery agents, active pigments for display, microsensors, interface stabilizers, and catalyst substrates. Overall, the engineered MPs expose their potential particularly in the field of biomedical engineering as the increased complexity in the engineered MPs fulfills well the requirements of the high-end applications. This review outlines the current trends of newly developed techniques used for engineered MPs fabrication and focuses on the current state of engineered MPs in biomedical applications.

Fabrication of silica nanotubes with an anisotropic functionality as a smart catalyst supporter

An anisotropic nanomaterial with different internal and external functionalities can serve as a versatile nanocarrier for smart nanocatalysts. Anisotropically functionalized silica nanotubes were prepared using a vapor phase synthesis (VPS) method with anodic aluminum oxide (AAO) as the hard template. The anisotropically functionalized silica nanotubes were used for the olefination of aryl iodide by embedded palladium nanoparticles and the highest olefination efficiency was 99%.

Facile and High-Throughput Synthesis of Functional Microparticles with Quick Response Codes

Encoded microparticles are high demand in multiplexed assays and labeling. However, the current methods for the synthesis and coding of microparticles either lack robustness and reliability, or possess limited coding capacity. Here, a massive coding of dissociated elements (MiCODE) technology based on innovation of a chemically reactive off-stoichimetry thiol-allyl photocurable polymer and standard lithography to produce a large number of quick response (QR) code microparticles is introduced. The coding process is performed by photobleaching the QR code patterns on microparticles when fluorophores are incorporated into the prepolymer formulation. The fabricated encoded microparticles can be released from a substrate without changing their features. Excess thiol functionality on the microparticle surface allows for grafting of amine groups and further DNA probes. A multiplexed assay is demonstrated using the DNA-grafted QR code microparticles. The MiCODE technology is further characterized by showing the incorporation of BODIPY-maleimide (BDP-M) and Nile Red fluorophores for coding and the use of microcontact printing for immobilizing DNA probes on microparticle surfaces. This versatile technology leverages mature lithography facilities for fabrication and thus is amenable to scale-up in the future, with potential applications in bioassays and in labeling consumer products.

Liquid crystal Janus emulsion droplets: preparation, tumbling, and swimming

This study introduces liquid crystal (LC) Janus droplets. We describe a process for the preparation of these droplets, which consist of nematic LC and polymer compartments. The process employs solvent-induced phase separation in emulsion droplets generated by microfluidics. The droplet morphology was systematically investigated and demonstrated to be sensitive to the surfactant concentration in the background phase, the compartment volume ratio, and the possible coalescence of multiple Janus droplets. Interestingly, the combination of a polymer and an anisotropic LC introduces new functionalities into Janus droplets, and these properties lead to unusual dynamical behaviors. The different densities and solubilities of the two compartments produce gravity-induced alignment, tumbling, and directional self-propelled motion of Janus droplets. LC Janus droplets with remarkable optical properties and dynamical behaviors thus offer new avenues for applications of Janus colloids and active soft matter.

Control of shape and size of polymer nanoparticles aggregates in a single-step microcontinuous flow process: a case of flower and spherical shapes

Controlled aggregation of polymer nanoparticles for building anisotropic nano- and microstructures via a self-assembling bottom-up process is an important strategy. Therefore, in this work, the formation of structured poly(methyl methacrylate) (PMMA) particles with diameters between lower micrometer and submicrometer range by use of a microcontinuous flow arrangement was investigated in the presence of nonionic water-soluble polymer polyvinylpyrrolidone (PVP). The investigations show that the microreaction strategy is well applicable and allows a tuning of size and shape of nanoparticles in dependence on reactant concentrations and flow rate ratios. Larger and complex structured polymer particles have been found at lower PVP concentration, whereas more compact submicron-sized particles were formed at higher PVP concentrations. The addition of ionic surfactants modulates the generation of characteristic particle shapes. The observation of intermediate states between complex flowerlike particles and simple spheres in dependence on the applied concentration of low molecular weight surfactants supports the explanation of particle formation by a mechanism with superposition of particle growth and assembling. When mixed surfactants (PVP-SDS or PVP-CTAB) are used, the final particles shape depends on the concentration of individual concentrations of surfactants and on the competition between mobility, solvation, and micelle formations.

Single-step microfluidic synthesis of various nonspherical polymer nanoparticles via in situ assembling: dominating role of polyelectrolytes molecules

In this paper, a microfluidic approach has been used for the synthesis of ellipsoidal, dumbbell, rodlike, and necklacelike polymer nanoparticles. High yields of special types of nonspherical nanoparticles have been achieved by the implementation of an emulsion polymerization into microfluidic arrangement with a micro hole-plate reactor for the formation of monomer droplets. Here, in particular, the formation of nonspherical polymer nanoparticles is dependent on the presence of polyelectrolyte surface active molecules such as poly(4-styrenesulfonic acid-co-maleic acid) sodium salt (PSS-co-PM), poly(sodium-p-styrenesulfonate) (PSSS), and polyanetholesulfonic acid sodium salt (PAES). The shapes and sizes of the interparticle nanoassemblies are precisely controlled by adjusting the concentration of polyelectrolytes in the aqueous phase, and by choosing suitable flow rate ratios (aqueous to monomer phase), respectively. The formation of polymer nanoparticles with different morphologies can be explained by a spontaneous in situ assembling under partial electrostatic repulsive control in the single step synthesis. The effect of particle charge and the competition between thermal motion of particles and electrostatic repulsion on the spontaneous assembling under the condition of a limited polarizability are discussed here as an important factor for the formation process of nonspherical polymer nanoparticles.

Spatioselective growth of metal-organic framework nanocrystals on compositionally anisotropic polymer particles

Selective growth of metal organic framework materials on the surface of compartmentalized polymer microparticles is achieved by electro-hydrodynamic co-jetting, selective surface modification, and anisotropic crystal growth.

Amphiphilic colloidal surfactants based on electrohydrodynamic co-jetting

A novel synthetic route for the preparation of amphiphilic Janus particles based on electrohydrodynamic cojetting has been developed. In this approach, selective encapsulation of hydrophobic fluorodecyl-polyhedral oligomeric silsesquioxane (F-POSS) in one compartment and a poly(vinyl alcohol) in the second compartment results in colloidal particles with surfactant-like properties including the self-organization at oil-water and air-water interfaces. Successful localization of the respective polymers in different compartments of the same particle is confirmed by a combination of fluorescence microscopy, vibrational spectroscopy, and ζ-potential measurements. We believe that this straightforward synthetic approach may lead to a diverse class of surface-active colloids that will have significant relevance ranging from basic scientific studies to immediate applications in areas, such as pharmaceutical sciences or cosmetics.

Eccentric loading of fluorogen with aggregation-induced emission in PLGA matrix increases nanoparticle fluorescence quantum yield for targeted cellular imaging

A simple strategy is developed to prepare eccentrically or homogeneously loaded nanoparticles (NPs) using poly (DL-lactide-co-glycolide) (PLGA) as the encapsulation matrix in the presence of different amounts of polyvinyl alcohol (PVA) as the emulsifier. Using 2,3-bis(4-(phenyl(4-(1,2,2-triphenylvinyl)-phenyl)amino)-phenyl)-fumaronitrile (TPETPAFN), a fluorogen with aggregation-induced emission (AIE) characteristics, as an example, the eccentrically loaded PLGA NPs show increased fluorescence quantum yields (QYs) as compared to the homogeneously loaded ones. Field emission transmission electron microscopy and fluorescence lifetime measurements reveal that the higher QY of the eccentrically loaded NPs is due to the more compact aggregation of AIE fluorogens that restricts intramolecular rotations of phenyl rings, which is able to more effectively block the non-radiative decay pathways. The eccentrically loaded NPs show far red/near infrared emission with a high fluorescence QY of 34% in aqueous media. In addition, by using poly([lactide-co-glycolide]-b-folate [ethylene glycol]) (PLGA-PEG-folate) as the co-encapsulation matrix, the obtained NPs are born with surface folic acid groups, which are successfully applied for targeted cellular imaging with good photostability and low cytotoxicity. Moreover, the developed strategy is also demonstrated for inorganic-component eccentrically or homogeneously loaded PLGA NPs, which facilitates the synthesis of polymer NPs with controlled internal architectures.

Janus-core and shell microfibers

Janus microcylinders composed of different polymers were prepared through coaxial co-jetting with dual-core flows, followed by cross-linking, microsectioning, and shell removal. Uniquely shaped building blocks can be fabricated by photo-patterning of one hemisphere of the microcylinders.

Swelling of block copolymer nanoparticles: a process combining deformation and phase separation

Swelling of block copolymers is a complex process in which deformation and microphase separation couple together. Here we demonstrated that nanoparticles of block copolymers and polymer composites which have a large variety of phase separation patterns and different shapes can be generated through swelling process. Particularly, we focused on the swelling process of lamellae-forming diblock copolymer nanoparticles and first observed the formation of terrace edges in diblock copolymer nanoparticles as a metastable microstructure in swelling. Moreover, the trace amount of swelling solvent shows a significant influence on the shape of polymer nanoparticles, leading to block copolymer nanodisks and snowman-like composite nanoparticles.

Janus colloidal particles: preparation, properties, and biomedical applications

Janus or anisotropic colloidal particles comprising of at least two components of different chemistry, functionality, and/or polarity have attracted attentions in a wide range of applications, e.g., in optics, magnetics, plasmonics, colloidal chemistry, and biomedicine. The interesting features of Janus colloidal particles are attributed to their tunable and controllable asymmetric structure, which allows controlling their physicochemical properties, down to the nanoscale. Moreover, their synergistic potential for multiplexing, multilevel targeting, and combination therapies make them particularly attractive for biomedical applications. However, the synthesis of Janus colloidal particles must be well-adapted to get particles with precise control of their various structural/physical/chemical properties. Nowadays, the advance in new fabrication processes is a strong need for fabricating compact composite particles with spatially separated functionalities, uniform size, tunable composition, and effective response to stimuli. In this review article, we summarized the most recent representative works on Janus colloidal particles including the various fabrication methods, important properties, and their potential applications, particularly in the biomedical field.

Emerging strategies for spatiotemporal control of stem cell fate and morphogenesis

Stem cell differentiation is regulated by the complex interplay of multiple parameters, including adhesive intercellular interactions, cytoskeletal and extracellular matrix remodeling, and gradients of agonists and antagonists that individually and collectively vary as a function of spatial locale and temporal stages of development. Current approaches to direct stem cell differentiation focus on systematically understanding the relative influences of microenvironmental perturbations and simultaneously engineering platforms aimed at recapitulating physicochemical aspects of tissue morphogenesis. This review focuses on novel approaches to control the spatiotemporal dynamics of stem cell signaling and morphogenic remodeling to direct the differentiation of stem cells and develop functional tissues for in vitro screening and regenerative medicine technologies.

Spontaneous shape reconfigurations in multicompartmental microcylinders

Nature's particles, such as spores, viruses or cells, are adaptive--i.e., they can rapidly alter major phenomenological attributes such as shape, size, or curvature in response to environmental changes. Prominent examples include the hydration-mediated opening of ice plant seeds, actuation of pine cones, or the ingenious snapping mechanism of predatory Venus flytraps that rely on concave-to-convex reconfigurations. In contrast, experimental realization of reconfigurable synthetic microparticles has been extremely challenging and only very few examples have been reported so far. Here, we demonstrate a generic approach towards dynamically reconfigurable microparticles that explores unique anisotropic particle architectures, rather than direct synthesis of sophisticated materials such as shape-memory polymers. Solely enabled by their architecture, multicompartmental microcylinders made of conventional polymers underwent active reconfiguration including shape-shifting, reversible switching, or three-way toggling. Once microcylinders with appropriate multicompartmental architectures were prepared by electrohydrodynamic cojetting, simple exposure to an external stimulus, such as ultrasound or an appropriate solvent, gives rise to interfacial stresses that ultimately cause reversible topographical reconfiguration. The broad versatility of the electrohydrodynamic cojetting process with respect to materials selection and processing suggests strategies for a wide range of dynamically reconfigurable adaptive materials including those with prospective applications for sensors, reprogrammable microactuators, or targeted drug delivery.

Dumpling-Like Nanocomplexes of Foldable Janus Polymer Sheets and Spheres

The formation of object complexes between Janus nanosheets and cross-linked polystyrene (PS) microspheres is reported. Sheets with one side tethered with PS chains and the other with poly(2-vinyl pyridine) made from triblock terpolymers were confirmed to be foldable by the addition of acidic water to their dispersion in tetrahydrofuran (THF). When acidic water was added to a THF dispersion of the sheets in the presence of PS spheres of 226 nm, dumpling-like complexes of two different nanoobjects were obtained by wrapping the spheres with the sheets.

Biomimetic delivery with micro- and nanoparticles

The nascent field of biomimetic delivery with micro- and nanoparticles (MNP) has advanced considerably in recent years. Drawing inspiration from the ways that cells communicate in the body, several different modes of "delivery" (i.e., temporospatial presentation of biological signals) have been investigated in a number of therapeutic contexts. In particular, this review focuses on (1) controlled release formulations that deliver natural soluble factors with physiologically relevant temporal context, (2) presentation of surface-bound ligands to cells, with spatial organization of ligands ranging from isotropic to dynamically anisotropic, and (3) physical properties of particles, including size, shape and mechanical stiffness, which mimic those of natural cells. Importantly, the context provided by multimodal, or multifactor delivery represents a key element of most biomimetic MNP systems, a concept illustrated by an analogy to human interpersonal communication. Regulatory implications of increasingly sophisticated and "cell-like" biomimetic MNP systems are also discussed.

Differentially degradable janus particles for controlled release applications

Janus particles with differentially degradable compartments were prepared by electrohydrodynamic (EHD) co-jetting and subsequent controlled crosslinking. These bicompartmental particles are composed of an interpenetrating polymer network of poly(ethylene oxide) and poly(acrylamide-co-acrylic acid) in one hemisphere and a crosslinked copolymer of dextran and poly(acrylamide-co-acrylic acid) segments in the second compartment. The compositional anisotropy caused differential hydrolytic susceptibility: Although both compartments were stable at pH 3.0, selective degradation of the PEO-containing compartment pH 7.4 was observed within 5 days. Janus particles with differentially degradable polymer compartments may be of interest for a range of oral drug delivery applications because of their propensity for decoupled release profiles.