Removal of hexavalent chromium and pentavalent arsenic from aqueous solutions by adsorption on polyethylenimine-modified silica nanoparticles

Chromium and arsenic are commonly found in water and wastewater as hexavalent chromium, Cr(VI), and inorganic arsenic species, such as pentavalent arsenic, As(V). In aqueous media, both Cr(VI) and As(V) exist predominantly in the form of oxy-anions. In our study, we prepared a polyethylenimine-silica composite material (SiO₂-PEI) as an adsorbent to study the adsorption capacity for chromate and arsenate ions. Polyethylenimine (PEI) can effectively bind negatively charged species through electrostatic interactions. The parameters that were evaluated, regarding the adsorption capacity were the effect of pH, the effect of the initial concentration of Cr(VI) and As(V), and the presence of other anions. Also, we examined the effect of Cr(VI) and As(V) on each other by studying the simultaneous removal of chromate and arsenate ions. Isotherm, kinetic, and thermodynamic analyses on the experimental data obtained were conducted. The results showed that the pH of the solution is affecting the charge density of PEI, and at pH 4, the lower value that was examined, the SiO₂-PEI exhibited higher adsorption capacity. The presence of other anions, such as phosphate, nitrate, and sulfate ions, had an adverse effect on the adsorption capacity of the SiO₂-PEI material for both chromate and arsenate ions. The adsorption capacity of arsenate was more affected by the presence of other anions compared to the chromate, and the higher impact was observed by the sulfate ions at pH 4, on the contrary for the chromate ions the higher impact was observed by the sulfate ions at pH 7 and by the phosphate ions at pH 4. Concerning the effect of temperature, the adsorption is an exothermic process and it was more favorable at lower environmental temperature. The study of simultaneous removal of Cr(VI) and As(V) declares the material's ability to accommodate both types of ions without requiring separate treatment steps. Addressing the simultaneous removal is essential for reducing the complexity of water treatment systems, lowering operational costs, and improving the safety of treated water.

Biological behavior of nanoparticles with Zr-89 for cancer targeting based on their distinct surface composition

Nano-sized materials with properties that enable their internalization into target cells using passive targeting systems have been utilized with radioisotopes to track their pharmacokinetics in the body. Here, we report the incorporation of novel chelator-free Zr-89 using a hierarchical iron oxide nanocomposite (⁸⁹Zr-IONC). Characterization revealed that it had a rice-shape with a mean width of 160 nm. The surface of the ⁸⁹Zr-IONCs was coated by polyethyleneimine (PEI) and polyvinylpyrrolidone (PVP) to improve the cancer target efficacy. The biological behavior of the nanoparticles coated with the polymers differed significantly by the surface composition. Positron emission tomography measurements by the labeled Zr-89 effectively confirmed the cancer target capability and the fate of distribution in the body. We found that only PVP coated ⁸⁹Zr-IONC reached the tumor region while non-coated and PEI coated ⁸⁹Zr-IONC tended to be undesirably entirely cleared in the liver and spleen. The ⁸⁹Zr-incorporated iron oxide nanocomposite is significantly stable for radiolabeling despite various surface modifications, allowing the potential carrier to specifically target cancer cells. The strategy of utilizing the biocompatible PEI and PVP surface coating system for negative charged nanoparticles such as iron oxide will afford enhanced biological application.

Tailoring of silica-based nanoporous pod by spermidine multi-activity

Ubiquitous in nature, polyamines (PAs) are a class of low-molecular aliphatic amines critically involved in cell growth, survival and differentiation. The polycation behavior is validated as a successful strategy in delivery systems to enhance oligonucleotide loading and cellular uptake. In this study, the chemical features and the functional roles of the PA spermidine are synergistically exploited in the synthesis and bioactive functionalization of SiO2-based structures. Inspired by biosilicification, the role of spermidine is assessed both as catalyst and template in a biomimetic one-pot synthesis of dense silica-based particles (SPs) and as a competitive agent in an interfacial reassembly strategy, to empty out SPs and generate spermidine-decorated hollow silica nanoporous pods (spd-SNPs). Spermidine bioactivity is then employed for targeting tumor cell over-expressed polyamine transport system (PTS) and for effective delivery of functional miRNA into melanoma cells. Spermidine decoration promotes spd-SNP cell internalization mediated by PTS and along with hollow structure enhances oligonucleotide loading. Accordingly, the functional delivery of the tumor suppressor miR-34a 3p resulted in intracellular accumulation of histone-complexed DNA fragments associated with apoptosis. Overall, the results highlight the potential of spd-SNP as a multi-agent anticancer therapy.

Mesoporous Silica Nanoparticles for Co-Delivery of Drugs and Nucleic Acids in Oncology: A Review

Mesoporous silica nanoparticles have attracted much attention in recent years as drug and gene delivery systems for biomedical applications. Among their most beneficial features for biomedicine, we can highlight their biocompatibility and their outstanding textural properties, which provide a great loading capacity for many types of cargos. In the context of cancer nanomedicine, combination therapy and gene transfection/silencing have recently been highlighted as two of its most promising fields. In this review, we aim to provide an overview of the different small molecule drug-nucleic acid co-delivery combinations that have been developed using mesoporous silica nanoparticles as carriers. By carefully selecting the chemotherapeutic drug and nucleic acid cargos to be co-delivered by mesoporous silica nanoparticles, different therapeutic goals can be achieved by overcoming resistance mechanisms, combining different cytotoxic mechanisms, or providing an additional antiangiogenic effect. The examples here presented highlight the great promise of this type of strategies for the development of future therapeutics.

Non-viral transfection vectors: are hybrid materials the way forward?

Transfection is a process by which oligonucleotides (DNA or RNA) are delivered into living cells. This allows the synthesis of target proteins as well as their inhibition (gene silencing). However, oligonucleotides cannot cross the plasma membrane by themselves; therefore, efficient carriers are needed for successful gene delivery. Recombinant viruses are among the earliest described vectors. Unfortunately, they have severe drawbacks such as toxicity and immunogenicity. In this regard, the development of non-viral transfection vectors has attracted increasing interests, and has become an important field of research. In the first part of this review we start with a tutorial introduction into the biological backgrounds of gene transfection followed by the classical non-viral vectors (cationic organic carriers and inorganic nanoparticles). In the second part we highlight selected recent reports, which demonstrate that hybrid vectors that combine key features of classical carriers are a remarkable strategy to address the current challenges in gene delivery.

Study of the controlled assembly of DNA gated PEI/Chitosan/SiO2 fluorescent sensor

In this paper, polyethylenimine (PEI) and Chitosan were simultaneously one-step doped into silicon dioxide (SiO₂ ) nanoparticles to synthesize PEI/Chitosan/SiO₂ composite nanoparticles. The polymer PEI contained a large amount of amino groups, which can realize the amino functionalized SiO₂ nanoparticles. And, the good pore forming effect of Chitosan was introduced into SiO₂ nanoparticles, and the resulting composite nanoparticles also had a porous structure. In pH 7.4 phosphate buffer solution (PBS), the amino groups of PEI had positive charges, and therefore the fluorescein sodium dye molecule can be loaded into the channels of PEI/Chitosan/SiO₂ composite nanoparticles by electrostatic adsorption. Furthermore, utilizing the diversity of DNA molecular conformation, we designed a high sensitive controllable assembly of DNA gated fluorescent sensor based on PEI/Chitosan/SiO₂ composite nanoparticles as loading materials. The factors affecting the sensing performance of the sensor were investigated, and the sensing mechanism was also further studied.

Promising gene delivery system based on polyethylenimine-modified silica nanoparticles

This article reports on the synthesis and full characterization of innovative silica-based nanoparticle composed of fumed silica as a core decorated with polyethylenimine (PEI) with different molecular weights (25, 10 and 1.8 kDa). Wide range of analytical, spectroscopic, and microscopic methods (TEM, DLS, ζ potential, elemental analysis (EA), TNBS and FTIR) were used to characterize the nanoparticles. Furthermore, transfection efficiency of these nanoparticles as non-viral vector was examined. The silica-PEI conjugates retained both the ability of PEI to fully condense plasmid DNA at low N/P ratios and suitable buffering capacity at the endosomal pH range. PEI-functionalized silica remarkably enhanced EGFP-N1 gene expression in murine neuroblastoma (Neuro-2A) cells up to 38 folds compared to PEI 25 kDa. Meanwhile the results of the cytotoxicity assays indicated that these silica-PEI conjugates have acceptable level of viability.

A general strategy to achieve ultra-high gene transfection efficiency using lipid-nanoparticle composites

Gene therapy provides a new hope for previously "incurable" diseases. Low gene transfection efficiency, however, is the bottle-neck to the success of gene therapy. It is very challenging to develop non-viral nanocarriers to achieve ultra-high gene transfection efficiencies. Herein, we report a novel design of "tight binding-but-detachable" lipid-nanoparticle composite to achieve ultrahigh gene transfection efficiencies of 60∼82%, approaching the best value (∼90%) obtained using viral vectors. We show that Fe@CNPs nanoparticles coated with LP-2000 lipid molecules can be used as gene carriers to achieve ultra-high (60-80%) gene transfection efficiencies in HeLa, U-87MG, and TRAMP-C1 cells. In contrast, Fe@CNPs having surface-covalently bound N,N,N-trimethyl-N-2-methacryloxyethyl ammonium chloride (TMAEA) oligomers can only achieve low (23-28%) gene transfection efficiencies. Similarly ultrahigh gene transfection/expression was also observed in zebrafish model using lipid-coated Fe@CNPs as gene carriers. Evidences for tight binding and detachability of DNA from lipid-nanoparticle nanocarriers will be presented.

In situ tracking the intracellular delivery of antisense oligonucleotides by fluorescein doped silica nanoparticles

Antisense oligonucleotides (ASOs) are often utilized to interfere with gene expression at mRNA level for cancer treatment. Here, we synthesized fluorescein doped silica nanoparticles (FSNPs) and coated them by polyethyleneimine (PEI) for carrying ASOs. Agarose gel electrophoresis proved that PEI/FSNPs could load ASOs by a weight ratio as high as 30:1. We tracked the delivery process of ASOs from the ASOs/PEI/FSNPs composites to HeLa cells in situ by the confocal laser scanning microscopy (CLSM) techniques, including nuclear staining and Z-axis scanning. We found the ASOs/PEI/FSNPs composites exhibited their biological effects at specific intracellular localization, and the fluorescence of the FSNPs showed the dynamic delivery process in the cells.

Dye-doped silica nanoparticles as luminescent organized systems for nanomedicine

This review summarizes developments and applications of luminescent dye doped silica nanoparticles as versatile organized systems for nanomedicine.

Comprehensive study of DNA binding on iron (II,III) oxide nanoparticles with a positively charged polyamine three-dimensional coating

Iron (II,III) oxide Fe3O4 nanoparticles (25 and 50 nm NPs) are grafted with amine groups through silanization in order to generate a positively charged coating for binding negatively charged species including DNA molecules. The spatial nature of the coating changes from a 2-D-functionalized surface (monoamines) through a layer of amine oligomers (diethylenetriamine or DETA, about 1 nm in length) to a 3-D layer of polyamine (polyethyleneimine or PEI, thickness ≥3.5 nm). These Fe3O4-PEI NPs were prepared by binding short-chain PEI polymers to the iodopropyl groups grafted on the NP surface. In this work, the surface charge density, or zeta potential, of the nanoparticles is found not to be the only factor influencing the DNA binding capacity, which also seems not to be affected by their buffering capacity profile in the range of pH 4-10. This study also allows the investigation of this 3-D effect on the surface of a nanoparticle as opposed to conventional 2-D amine functionalization. The flexibility of the PEI coating, which consists of only 1, 2, and 3° amines, on the nanoparticle surface has a significant influence on the overall DNA binding capacity and the binding efficiency (or N/P ratio). These polyamine-functionalized nanoparticles can be used in the purification of biomolecules and the delivery of drugs and large biomolecules.

Polycations-functionalized water-soluble gold nanoclusters: a potential platform for simultaneous enhanced gene delivery and cell imaging

Noble metal nanoclusters have emerged as a fascinating area of widespread interest in nanomaterials. Herein, we report the synthesis of the PEI-templated gold nanoclusters (PEI-AuNCs) as an efficient carrier for gene delivery. The PEI-AuNCs integrate the advantages of PEI and AuNCs: the presence of AuNCs can effectively decrease the cytotoxicity of PEI, making it possible to apply them in biological systems, while the cationic polymer layer PEI with positive charges is essential for enhanced gene transfection efficiency. In addition, with excellent photoluminescent properties, the AuNCs also endow our system with the versatility of fluorescent imaging, indicating a great potential as an ideal fluorescent probe to track the transfection behavior. Our studies provide strong evidence that the PEI-AuNCs can be utilized as efficient gene delivery agents.

Current status of gene delivery: spotlight on nanomaterial-polymer hybrids

Gene therapy aims to treat human disorders by introducing genetic materials into specific target cells or tissues. Despite the curability for the origIn of diseases by restoring missing functionalities, no technical feasibility of gene therapy has been established due to the lack of safe and efficient gene delivery systems. The emergence of nanotechnology has provided an opportunity to create nanomaterials that are suitable for the biomedical applications. Nanomaterials integrated with cationic polymers offer novel platforms that allow not only easy incorporation of genetic materials through electrostatic interactions but also further modifications to be upgraded to theranostics. In this article, current status of gene delivery utilizing hybrid nanomaterials that are composed of novel nanoplatforms and cationic polymers are highlighted. In particular, different strategies employed for the construction of nanomaterial-polymer hybrids are described.

siRNA-aptamer chimeras on nanoparticles: preserving targeting functionality for effective gene silencing

SiRNA-aptamer chimeras are emerging as a highly promising approach for cell-type specific delivery of siRNA due to the outstanding targeting capability of aptamers and the compatibility of chimeras with native ribonuclease (Dicer) processing. For efficient RNA interference (RNAi), however, additional challenges must be addressed, in particular how to get siRNA out of the endosome after cell entry and how to preserve aptamer targeting specificity when chimeras are combined with delivery carriers. Here, we report a rationally designed nanoparticle vector that simultaneously displays large surface area for high siRNA payload, exposed aptamer for specific targeting, proton sponge effect for endosome escape, and fluorescence for imaging and quantification. A key concept of this work is to graft chimeras onto nanoparticle surface via a two-step process: first immobilizing siRNA onto nanoparticle via noncovalent interactions to facilitate intracellular unpackaging and reduce nanoparticle surface charge (avoiding nonspecific electrostatic interactions between aptamers and nanoparticles) and then coupling siRNA and aptamer with retained conformation and high accessibility. Compared with conventional one-step adsorption of siRNA-aptamer chimeras onto nanoparticles with random orientations and conformations, which does not elicit much improved RNAi effect than nontargeted nanoparticle-siRNA complexes (∼6-8% improvement of the total cell population), under the same RNA concentration our approach shows selective gene silencing and enables 34% more silenced cells of the total cell population over nontargeted nanoparticle-siRNA complexes. This remarkable difference in RNAi efficiency using nanoparticle-chimera complexes is directly related to cell uptake discrepancy resulting from aptamer conformation on the nanoparticle surface (intact vs random).