An Effective Strategy for Template-Free Electrodeposition of Aluminum Nanowires with Highly Controllable Irregular Morphologies

Aluminum nanowires with irregular morphologies were prepared by template-free electrodeposition from a room-temperature chloroaluminate ionic liquid. The effects of the diffusion condition and deposition potential on the morphologies of Al nanowires were investigated. The decrease of diffusion flux leads to the formation of particular segmented morphologies of Al nanowires. A dynamic equilibrium between the electrochemical reaction and the diffusion of Al₂Cl₇⁻ results in the current fluctuation and the periodical variation of diameters in the Al nanowires growth period. Al nanowires with several kinds of morphologies can be controllably electrodeposited under a restricted diffusion condition, without using a template. Increasing the overpotential shows the similar influence on the morphology of Al nanowires as the decrease in diffusion flux under the restricted diffusion condition. Most of the segmented Al nanowires have a single crystalline structure and grow in the [100] orientation. This work also provides a new strategy for the fabrication of nanowires with highly controllable irregular morphologies.

Facile Assembly of Aligned Magnetic Nanoparticle Chains in Polymer Nanocomposite Films by Magnetic Flow Coating

Magnetic nanoparticle chains are found in biosystems, such as in the brain of migratory birds. Inspired by natural assemblies, in a novel approach, the facile assembly of magnetically aligned polymer grafted cobalt nanoparticle (MPGNP) chains in thin polymer films was accomplished by using low strength permanent magnets directly during the flow-casting process. Unlike previous studies of MPGNP chain alignment in the high viscosity melt phase, the high mobility of such dispersed MPGNPs during casting by magnetic flow coating of polystyrene (PS) nanocomposite thin films from a dispersion allowed for formation of well-aligned MPGNP chains at the PS film/air interface. Both spherical (symmetric) and cylindrical (asymmetric) MPGNP aligned chains were obtained with distinct properties. The average chain length and width, number of particles per chain, spacing between parallel chains, and chain alignment were quantified using surface probe and electron microscopy, and grazing incidence X-ray. The aligned chains did not randomize when annealed above the film glass temperature, apparently due to the high translational entropic barrier for macroscopic (GISAXS) chain realignment. The Young's bending modulus of the aligned MPGNP nanocomposite films as revealed by a thin film wrinkling metrology showed that the elastic modulus along the chain axis direction was higher for the film with the cylindrical but not the spherical MPGNP chains. This suggests that PGNP chain flexural properties depend on asymmetry of the local MPGNP unit, much like the persistence length "stiffness" effect of polymer chains. The ferromagnetic nature of the aligned PGMNP chains resulted in film rotation, as well as repulsive and attractive translation under an applied external magnetic field. Such magnetically responsive films can be useful for sensors and other applications.

Composition- and Structure-Tunable Gold-Cobalt Nanoparticles and Electrocatalytic Synergy for Oxygen Evolution Reaction

The increasing energy crisis constitutes an inspiring drive seeking alternative energies such as hydrogen from water splitting which is clean and abundant, but a key challenge for water splitting is the need of highly efficient catalysts for oxygen evolution reaction (OER). This report describes findings of an investigation of the synthesis of gold-cobalt (AuCo) nanoparticles by a facile one-pot and injection method and their use as highly efficient catalysts for OER. While particle size depends on the synthesis method, the composition of the nanoparticles is controlled by feeding ratio of Au and Co precursors in the synthesis. Depending on Co content, the nanoparticles exhibit largely phase-segregated domains with a core (Au)-shell (Co) type of structure at a high level of Co. Upon the thermochemical treatment of carbon-supported AuCo nanoparticles, the redox activity of Co species in the nanoparticles with cycle number is shown to decrease which changes the surface oxidation state of Co species without changing the composition significantly. The electrocatalytic activity for OER in alkaline electrolytes is shown to depend on the bimetallic composition, displaying a maximum activity for an Au:Co ratio of ∼2:3. This dependence is also shown to correlate with the surface oxidation state and redox activities, providing an insight into the electrocatalytic activity. Mechanistic aspects of the electrocataltytic properties are discussed in terms of the bifunctional synergy of Co and Au in the nanoparticle catalysts.

Nanoparticle conversion chemistry: Kirkendall effect, galvanic exchange, and anion exchange

Conversion chemistry is a rapidly maturing field, where chemical conversion of template nanoparticles (NPs) into new compositions is often accompanied by morphological changes, such as void formation. The principles and examples of three major classes of conversion chemical reactions are reviewed: the Kirkendall effect for metal NPs, galvanic exchange, and anion exchange, each of which can result in void formation in NPs. These reactions can be used to obtain complex structures that may not be attainable by other methods. During each kind of conversion chemical reaction, NPs undergo distinct chemical and morphological changes, and insights into the mechanisms of these reactions will allow for improved fine control and prediction of the structures of intermediates and products. Conversion of metal NPs into oxides, phosphides, sulphides, and selenides often occurs through the Kirkendall effect, where outward diffusion of metal atoms from the core is faster than inward diffusion of reactive species, resulting in void formation. In galvanic exchange reactions, metal NPs react with noble metal salts, where a redox reaction favours reduction and deposition of the noble metal (alloying) and oxidation and dissolution of the template metal (dealloying). In anion exchange reactions, addition of certain kinds of anions to solutions containing metal compound NPs drives anion exchange, which often results in significant morphological changes due to the large size of anions compared to cations. Conversion chemistry thus allows for the formation of NPs with complex compositions and structures, for which numerous applications are anticipated arising from their novel catalytic, electronic, optical, magnetic, and electrochemical properties.

Colloidal polymers via dipolar assembly of magnetic nanoparticle monomers

In this Spotlight on Applications, we describe our recent progress in the preparation of hierarchical one-dimensional (1-D) materials constructed from polymer-coated ferromagnetic cobalt nanoparticles. We begin with a general discussion of nanoparticles capable of 1-D self-organization to form 1-D assemblies, which we term colloidal polymers. The need for efficient, highly directional interactions prompted our investigation with polymer-coated ferromagnetic nanoparticles, which spontaneously form linear assemblies through coupling of north and south magnetic poles present in these single-domain ferromagnetic nanoparticles. These highly directional N-S interactions and the resulting formation of 1-D assemblies can be understood in the context of traditional polymer-forming reactions. The dipolar assembly of these ferromagnetic nanoparticles into chains and binary assemblies while dispersed in organic media has been investigated as a key foundation to form novel magnetic materials and heterostructured nanocomposites. These studies enabled the fabrication of magnetic nanoactuating systems resembling "artificial cilia and flagella". We then discuss our recent efforts to prepare cobalt oxide nanowires using various nanoparticle conversion reactions through a process termed colloidal polymerization. A series of novel functional "colloidal monomers" based on dipolar cobalt nanoparticles were also prepared, incorporating noble metal or semiconductor nanoinclusions to form heterostructured cobalt oxide nanocomposites.

Colloidal polymers from dipolar assembly of cobalt-tipped CdSe@CdS nanorods

The synthesis of a modular colloidal polymer system based on the dipolar assembly of CdSe@CdS nanorods functionalized with a single cobalt nanoparticle "tip" (CoNP-tip) is reported. These heterostructured nanorods spontaneously self-assembled via magnetic dipolar associations of the cobalt domains. In these assemblies, CdSe@CdS nanorods were carried as densely grafted side chain groups along the dipolar NP chain to form bottlebrush-type colloidal polymers. Nanorod side chains strongly affected the conformation of individual colloidal polymer bottlebrush chains and the morphology of thin films. Dipolar CoNP-tipped nanorods were then used as "colloidal monomers" to form mesoscopic assemblies reminiscent of traditional copolymers possessing segmented and statistical compositions. Investigation of the phase behavior of colloidal polymer blends revealed the formation of mesoscopic phase separated morphologies from segmented colloidal copolymers. These studies demonstrated the ability to control colloidal polymer composition and morphology in a manner observed for classical polymer systems by synthetic control of heterostructured nanorod structure and harnessing interparticle dipolar associations.

Synthesis of ferromagnetic cobalt nanoparticle tipped CdSe@CdS nanorods: critical role of Pt-activation

Activation of CdSe@CdS nanorods by a platinum deposition reaction enables selective deposition of a single dipolar cobalt nanoparticle tip per nanorod.