Simultaneous electrochemical determination of two hepatitis B antigens using graphene-SnO2 hybridized with sea urchin-like bimetallic nanoparticles

The hepatitis B virus (HBV) can cause chronic hepatitis and hepatocellular carcinoma. Hepatitis B surface antigen (HBs-Ag) and Hepatitis B e-antigen (HBe-Ag) are key markers for the diagnosis of HBV. In this study, electrodeposited gold was used as a sensing platform. Three-dimensional (3D) SnO₂-loaded graphene sheets functionalized by Thionine (Thi) and ferrocene (Fc) and hybridized by sea urchin-like bimetallic nanoparticles (GS-SnO₂-BMNPs) were used as redox probes for labeling antibodies to fabricate sandwich-type immunosensors for the simultaneous determination of HBs-Ag and HBe-Ag. The bimetallic nanoparticles, gold hybrid platinum nanoparticles (Au@Pt) and L-cysteine-connected gold-silver nanoparticles (Ag-cys-Au), have large electroactive surface areas. They were prepared by an efficient and economical method. Additionally, the sea urchin morphology accelerates spatial utilization, thus increasing the number of combination sites. Therefore, the immune probe can load a mass of signal source molecules (Thi and Fc). Furthermore, GS-SnO₂-BMNPs (GS-SnO₂-Au@Pt and GS-SnO₂-Ag-cys-Au) with excellent electrical conductivity and bimetallic synergy can enhance the square wave voltammetry (SWV) signal. SWV was used to record the electrochemical signal by scanning the potential from - 0.6 to 0.6 V (vs. SCE). The signal peaks resulted from the reduction reaction of Thi and Fc, and two signal peaks were completely separate. The peak position and current intensity reflect the identity and level of the corresponding antigens. Therefore, the simultaneous detection of two viral biomarkers was achieved by the proposed immunosensor. The fabricated immunosensor showed a linear concentration range for HBs-Ag (0.01-100 ng·mL^-1) and HBe-Ag (0.01-100 ng·mL^-1), with detection limits for HBs-Ag and HBe-Ag of  4.67 pg·mL^-1 and 4.68 pg·mL^-1, respectively.  The RSD of HBs-Ag ranged between 2.0 and 4.4%and the recovery was in the range 98.7 to 99.4%. For  HBe-Ag the RSD  was between 2.6 and 3.3% andrecoveries  in the range 99.2 to 100.5% were obtained.

Graphene Oxide Concentration Effect on the Optoelectronic Properties of ZnO/GO Nanocomposites

In this work, the effects of graphene oxide (GO) concentrations (1.5 wt.%, 2.5 wt.%, and 5 wt.%) on the structural, morphological, optical, and luminescence properties of zinc oxide nanorods (ZnO NRs)/GO nanocomposites, synthesized by a facile hydrothermal process, were investigated. X-ray diffraction (XRD) patterns of NRs revealed the hexagonal wurtzite structure for all composites with an average coherence length of about 40–60 nm. A scanning electron microscopy (SEM) study confirmed the presence of transparent and wrinkled, dense GO nanosheets among flower-like ZnO nanorods, depending on the GO amounts used in preparation. Raman spectroscopy, Fourier transform infrared spectroscopy (FTIR), ultraviolet–visible (UV–Vis) absorption spectroscopy, and photoluminescence (PL) measurements revealed the impact of GO concentration on the optical and luminescence properties of ZnO NRs/GO nanocomposites. The energy band gap of the ZnO nanorods was independent of GO concentration. Photoluminescence spectra of nanocomposites showed a significant decrease in the intensities in the visible light range and red shifted suggesting a charge transfer process. The nanocomposites’ chromaticity coordinates for CIE 1931 color space were estimated to be (0.33, 0.34), close to pure white ones. The obtained results highlight the possibility of using these nanocomposites to achieve good performance and suitability for optoelectronic applications.

Nanomaterials-based Electrochemical Immunosensors

With the development of nanomaterials and sensor technology, nanomaterials-based electrochemical immunosensors have been widely employed in various fields. Nanomaterials for electrode modification are emerging one after another in order to improve the performance of electrochemical immunosensors. When compared with traditional detection methods, electrochemical immunosensors have the advantages of simplicity, real-time analysis, high sensitivity, miniaturization, rapid detection time, and low cost. Here, we summarize recent developments in electrochemical immunosensors based on nanomaterials, including carbon nanomaterials, metal nanomaterials, and quantum dots. Additionally, we discuss research challenges and future prospects for this field of study.

A sandwich-type electrochemical immunosensor based on the biotin- streptavidin-biotin structure for detection of human immunoglobulin G

A sandwich-type immunosensor is designed and fabricated to detect the human immunoglobulin G (HIgG) using polyaniline and tin dioxide functionalized graphene (GS-SnO2-PAN) as the platform and biotin-functionalized amination magnetic nanoparticles composite (B-Fe3O4@APTES) as the label. GS-SnO2-PAN is used as the sensing agent to capture the primary anti-HIgG (Ab1) and SnO2 reduces the stack of GS. The B-Fe3O4@APTES with a large surface area and excellent biocompatibility captures second antibody (Ab2) efficiently based on the highly selective recognition of streptavidin to biotinylated antibody. The B-Fe3O4@APTES has better electro-catalytic activity in the reduction of hydrogen peroxide (H2O2) and the "biotin-streptavidin-biotin" (B-SA-B) strategy leads to signal amplification. Under optimal conditions, the immunosensor has a wide sensitivity range from 1 pg/L to 10 ng/L and low detection limit of 0.33 pg/L (S/N = 3) for HIgG. The immunosensor has high sensitivity, fast assay rate, as well as good reproducibility, specificity, and stability especially in the quantitative detection of biomolecules in serum samples.

Three-dimensional macro-structures of two-dimensional nanomaterials

This review summarizes the recent progress and efforts in the synthesis, structure, properties, and applications of three-dimensional macro-structures of two-dimensional nanomaterials.

An olive-shaped SnO2 nanocrystal-based low concentration H2S gas sensor with high sensitivity and selectivity

Olive-shaped SnO₂ nanocrystals were synthesized successfully via a facile hydrothermal route, using tin dichloride hydrate, oxalic acid dihydrate and polyvinylpyrrolidone as reaction precursors, and showed great potential in the large-scale preparation of SnO₂ nanocrystals.

Electrochemical biosensors on platforms of graphene

In recent years, graphene, the two-dimensional closely packed honeycomb carbon lattice, has been attracting much attention in the field of electrochemistry due to its intrinsic properties and merits. Efforts to create novel graphene based electrochemical biosensors have led to the establishment of effective strategies for diverse bioassays, from simple molecules to complex biotargets. In this Feature Article, we provide an overview of electrochemical biosensing with graphene related materials, and discuss the role of graphene in different sensing protocols.

Synthesis of graphene-supported noble metal hybrid nanostructures and their applications as advanced electrocatalysts for fuel cells

Graphene (GN) is an emerging carbon material that may soon find practical applications. With its unusual properties, GN is an ideal platform for constructing a series of GN-based functional nanomaterials. Among them, GN/noble metal hybrids become one of the families of composite materials with extraordinary properties by combining the advantages of noble metal nanostructures and GN. The recent progress in the synthesis of GN/noble metal hybrids is presented first, such as in situ solution based methods, electrochemical deposition methods, self-assembly and other methods. Then, the applications of these novel GN/noble metal hybrids in fuel cells are summarized and discussed. Future research trends and challenges of design and synthesis of GN/noble metal hybrids are proposed.

Free-standing and binder-free lithium-ion electrodes based on robust layered assembly of graphene and Co3O4 nanosheets

Free-standing and binder-free Co3O4/graphene films were fabricated through vacuum filtration and thermal treatment processes, in which sheet-like Co3O4 and graphene were assembled into a robust lamellar hierarchical structure via electrostatic interactions. The morphological compatibility coupled with strong interfacial interactions between Co3O4 and graphene significantly promoted the interfacial electron and lithium ion transport. When used as a binder-less and free-standing electrode for lithium-ion batteries, the hybrid film delivered a high specific capacity (~1400 mA h g(-1) at 100 mA g(-1) based on the total electrode weight), enhanced rate capability and excellent cyclic stability (~1200 mA h g(-1) at 200 mA g(-1) after 100 cycles). This effective strategy will provide new insight into the design and synthesis of many other composite electrodes for high-performance lithium-ion batteries.

SnO₂-based nanomaterials: synthesis and application in lithium-ion batteries

The development of new electrode materials for lithium-ion batteries (LIBs) has always been a focal area of materials science, as the current technology may not be able to meet the high energy demands for electronic devices with better performance. Among all the metal oxides, tin dioxide (SnO₂) is regarded as a promising candidate to serve as the anode material for LIBs due to its high theoretical capacity. Here, a thorough survey is provided of the synthesis of SnO₂-based nanomaterials with various structures and chemical compositions, and their application as negative electrodes for LIBs. It covers SnO₂ with different morphologies ranging from 1D nanorods/nanowires/nanotubes, to 2D nanosheets, to 3D hollow nanostructures. Nanocomposites consisting of SnO₂ and different carbonaceous supports, e.g., amorphous carbon, carbon nanotubes, graphene, are also investigated. The use of Sn-based nanomaterials as the anode material for LIBs will be briefly discussed as well. The aim of this review is to provide an in-depth and rational understanding such that the electrochemical properties of SnO₂-based anodes can be effectively enhanced by making proper nanostructures with optimized chemical composition. By focusing on SnO₂, the hope is that such concepts and strategies can be extended to other potential metal oxides, such as titanium dioxide or iron oxides, thus shedding some light on the future development of high-performance metal-oxide based negative electrodes for LIBs.

A switch of the oxidation state of graphene oxide on a surface plasmon resonance chip

Controlling the assembly and manipulating the oxidation state of graphene nanosheets on surfaces are of essential importance for application of graphene-related optical and biosensing devices. In this study, we assemble a graphene oxide (GO) film on a surface plasmon resonance chip surface and then convert it to reduced graphene by an in situ electrochemical method. The mechanism and application of surface-enhanced Raman spectroscopy and DNA sensing from graphene-based substrates are investigated. The average thickness and dielectric constant of GO are varied significantly with the switch of its oxidation state. Electrochemical reduction decreases the distance between carbon atoms and the gold surface by removing the spacer of oxygen functional groups. The electromagnetic field of the graphene surface is therefore enhanced, resulting in an enhancement of the Raman signal. A p doping of electrochemically reduced GO (ERGO) that occurred from changes in the graphene electronic structure through interaction between gold and ERGO is also observed during electrochemical reduction. The GO and ERGO substrates perform different interaction abilities with single- and double-stranded DNA. This work may be valuable for graphene-related research works on optoelectronics and biosensors.

Graphene-based electrodes

Graphene, the thinnest two dimensional carbon material, has become the subject of intensive investigation in various research fields because of its remarkable electronic, mechanical, optical and thermal properties. Graphene-based electrodes, fabricated from mechanically cleaved graphene, chemical vapor deposition (CVD) grown graphene, or massively produced graphene derivatives from bulk graphite, have been applied in a broad range of applications, such as in light emitting diodes, touch screens, field-effect transistors, solar cells, supercapacitors, batteries, and sensors. In this Review, after a short introduction to the properties and synthetic methods of graphene and its derivatives, we will discuss the importance of graphene-based electrodes, their fabrication techniques, and application areas.