Factors Influencing Properties of Spider Silk Coatings and Their Interactions within a Biological Environment

Biomaterials are an indispensable part of biomedical research. However, although many materials display suitable application-specific properties, they provide only poor biocompatibility when implanted into a human/animal body leading to inflammation and rejection reactions. Coatings made of spider silk proteins are promising alternatives for various applications since they are biocompatible, non-toxic and anti-inflammatory. Nevertheless, the biological response toward a spider silk coating cannot be generalized. The properties of spider silk coatings are influenced by many factors, including silk source, solvent, the substrate to be coated, pre- and post-treatments and the processing technique. All these factors consequently affect the biological response of the environment and the putative application of the appropriate silk coating. Here, we summarize recently identified factors to be considered before spider silk processing as well as physicochemical characterization methods. Furthermore, we highlight important results of biological evaluations to emphasize the importance of adjustability and adaption to a specific application. Finally, we provide an experimental matrix of parameters to be considered for a specific application and a guided biological response as exemplarily tested with two different fibroblast cell lines.

β-Sheet Structure Formation within Binary Blends of Two Spider Silk Related Peptides

Intrinsically disordered proteins (IDPs) play an important role in molecular biology and medicine because their induced folding can lead to so-called conformational diseases, where β-amyloids play an important role. Still, the molecular folding process into the different substructures, such as parallel/antiparallel or extended β-sheet/crossed β-sheet is not fully understood. The recombinant spider silk protein eADF4(Cx) consisting of repeating modules C, which are composed of a crystalline (pep-c) and an amorphous peptide sequence (pep-a), can be used as a model system for IDP since it can assemble into similar structures. In this work, blend films of the pep-c and pep-a sequences were investigated to modulate the β-sheet formation by varying the molar fraction of pep-c and pep-a. Dichroic Fourier-transform infrared spectroscopy (FTIR), circular dichroism, spectroscopic ellipsometry, atomic force microscopy, and IR nanospectroscopy were used to examine the secondary structure, the formation of parallel and antiparallel β-sheets, their orientation, and the microscopic roughness and phase formation within peptide blend films upon methanol post-treatment. New insights into the formation of filament-like structures in these silk blend films were obtained. Filament-like structures could be locally assigned to β-sheet-rich structures. Further, the antiparallel or parallel character and the orientation of the formed β-sheets could be clearly determined. Finally, the ideal ratio of pep-a and pep-c sequences found in the fibroin 4 of the major ampullate silk of spiders could also be rationalized by comparing the blend and spider silk protein systems.

Biocompatible Optical Fibers Made of Regenerated Cellulose and Recombinant Cellulose-Binding Spider Silk

The fabrication of green optical waveguides based on cellulose and spider silk might allow the processing of novel biocompatible materials. Regenerated cellulose fibers are used as the core and recombinantly produced spider silk proteins eADF4(C16) as the cladding material. A detected delamination between core and cladding could be circumvented by using a modified spider silk protein with a cellulose-binding domain-enduring permanent adhesion between the cellulose core and the spider silk cladding. The applied spider silk materials were characterized optically, and the theoretical maximum data rate was determined. The results show optical waveguide structures promising for medical applications, for example, in the future.

Design of Recombinant Spider Silk Proteins for Cell Type Specific Binding

Cytophilic (cell-adhesive) materials are very important for tissue engineering and regenerative medicine. However, for engineering hierarchically organized tissue structures comprising different cell types, cell-specific attachment and guidance are decisive. In this context, materials made of recombinant spider silk proteins are promising scaffolds, since they exhibit high biocompatibility, biodegradability, and the underlying proteins can be genetically functionalized. Here, previously established spider silk variants based on the engineered Araneus diadematus fibroin 4 (eADF4(C16)) are genetically modified with cell adhesive peptide sequences from extracellular matrix proteins, including IKVAV, YIGSR, QHREDGS, and KGD. Interestingly, eADF4(C16)-KGD as one of 18 tested variants is cell-selective for C2C12 mouse myoblasts, one out of 11 tested cell lines. Co-culturing with B50 rat neuronal cells confirms the cell-specificity of eADF4(C16)-KGD material surfaces for C2C12 mouse myoblast adhesion.

Synergistic enhancement on flexible solid-state supercapacitor based on redox-active Fe3+ions/natural spidroin modified vertically aligned carbon nanotube arrays

The conductive skeleton and aligned carbon nanotube array (CNTA) structure can greatly shorten the ion transfer path and promote the charge transfer speed, which makes the CNTA an ideal electrode material for energy storage application. However, poor mechanical stability and low specific capacitance greatly impede its practical utilization. Here, we introduce a promising flexible electrode material based on the natural spider silk protein (SSP) modified CNTA(SSP/CNTA) with improved hydrophilicity and mechanical flexibility. The redox-active Fe³⁺doped SSP/CNTA flexible solid-state supercapacitor (FSSC) device with superior energy storage performance was assembled in a symmetric 'sandwich-type' structure. The synergetic interaction between Fe³⁺ions and the SSP are proved to greatly enhance the electrochemical performance especially the long-term cyclic stability. The Fe³⁺doped SSP/CNTA FSSCs device achieves an ultra-high volumetric capacitance of 4.92 F cm^-3at a sweep speed of 1 mV s^-1. Meanwhile it exhibited an excellent cycling stability with an increased capacitance by 10% after 10 000 charge-discharge cycles. As a control, a Fe³⁺doped CNTA composite device without SSP will lose over 74% of the capacitance after 10 000 cycles. The energy storage mechanism analysis confirms the dominated capacitive behavior of the device, which explained a considerable power density and rate performance. Our method thus provides a promising strategy to build up highly-efficient redox-enhanced FSSCs for next generation of wearable and implantable electronics.

Spidroin-Based Biomaterials in Tissue Engineering: General Approaches and Potential Stem Cell Therapies

Spider silks are increasingly gaining interest for potential use as biomaterials in tissue engineering and biomedical applications. Owing to their facile and versatile processability in native and regenerated forms, they can be easily tuned via chemical synthesis or recombinant technologies to address specific issues required for applications. In the past few decades, native spider silk and recombinant silk materials have been explored for a wide range of applications due to their superior strength, toughness, and elasticity as well as biocompatibility, biodegradation, and nonimmunogenicity. Herein, we present an overview of the recent advances in spider silk protein that fabricate biomaterials for tissue engineering and regenerative medicine. Beginning with a brief description of biological and mechanical properties of spidroin-based materials and the cellular regulatory mechanism, this review summarizes various types of spidroin-based biomaterials from genetically engineered spider silks and their prospects for specific biomedical applications (e.g., lung tissue engineering, vascularization, bone and cartilage regeneration, and peripheral nerve repair), and finally, we prospected the development direction and manufacturing technology of building more refined and customized spidroin-based protein scaffolds.

A review on advances in the applications of spider silk in biomedical issues

Spider silk, as one of the hardest natural and biocompatible substances with extraordinary strength and flexibility, have become an ideal option in various areas of science and have made their path onto the biomedical industry. Despite its growing popularity, the difficulties in the extraction of silks from spiders and farming them have made it unaffordable and almost impossible for industrial scale. Biotechnology helped production of spider silks recombinantly in different hosts and obtaining diverse morphologies out of them based on different processing and assembly procedures. Herein, the characteristics of these morphologies and their advantages and disadvantages are summarized. A detailed view about applications of recombinant silks in skin regeneration and cartilage, tendon, bone, teeth, cardiovascular, and neural tissues engineering are brought out, where there is a need for strong scaffolds to support cell growth. Likewise, spider silk proteins have applications as conduit constructs, medical sutures, and 3D printer bioinks. Other characteristics of spider silks, such as low immunogenicity, hydrophobicity, homogeneity, and adjustability, have attracted much attention in drug and gene delivery. Finally, the challenges and obstacles ahead for industrializing the production of spider silk proteins in sufficient quantities in biomedicine, along with solutions to overcome these barriers, are discussed.

Designing of spider silk proteins for human induced pluripotent stem cell-based cardiac tissue engineering

Materials made of recombinant spider silk proteins are promising candidates for cardiac tissue engineering, and their suitability has so far been investigated utilizing primary rat cardiomyocytes. Herein, we expanded the tool box of available spider silk variants and demonstrated for the first time that human induced pluripotent stem cell (hiPSC)-derived cardiomyocytes attach, contract, and respond to pharmacological treatment using phenylephrine and verapamil on explicit spider silk films. The hiPSC-cardiomyocytes contracted for at least 14 days on films made of positively charged engineered Araneus diadematus fibroin 4 (eADF4(κ16)) and three different arginyl-glycyl-aspartic acid (RGD)-tagged spider silk variants (positively or negatively charged and uncharged). Notably, hiPSC-cardiomyocytes exhibited different morphologies depending on the spider silk variant used, with less spreading and being smaller on films made of eADF4(κ16) than on RGD-tagged spider silk films. These results indicate that spider silk engineering is a powerful tool to provide new materials suitable for hiPSC-based cardiac tissue engineering.

•

hiPSC-cardiomyocytes attach and contract on positively charged and/or RGD-tagged spider silk variants.

•

hiPSC-cardiomyocytes exhibit spider silk variant-dependent morphology upon adhesion.

•

Explicit spider silk variants promote long-term contractility of hiPSC-cardiomyocytes.

•

hiPSC-cardiomyocytes grown on spider silk materials respond to pharmacological treatment.

Dichroic Fourier Transform Infrared Spectroscopy Characterization of the β-Sheet Orientation in Spider Silk Films on Silicon Substrates

Orientation analysis of the β-sheet structure within films of the established recombinant spider silk protein eADF4(C16) was performed using a concept based on dichroic transmission- and attenuated total reflection-Fourier transform infrared spectroscopy, lineshape analysis, assignment of amide I components to specific vibration modes, and transition dipole moment directions of β-sheet structures. Based on the experimental dichroic ratio R, the order parameter S of β-sheet structures was calculated with respect to uniaxial orientation. Films of eADF4(C16) were deposited on untexturized (Si) and unidirectionally scratched silicon substrates (Si-sc) and post-treated with MeOH vapor. Freshly cast thin and thick eADF4(C16) films out of hexafluoroisopropanol featured β-sheet contents of ≈6%, which increased to >30% after MeOH post-treatment in dependence of time. Pseudo-first order folding kinetics were obtained, suggesting a transition from an unfolded to a folded state. In MeOH post-treated thin films with diameters in the nanometer range, a significant orientation of β-sheets was obtained regardless of the texturization of the silicon substrate (Si, Si-sc). This was rationalized by dichroic ratios of the amide I component at 1696 cm^-1 assigned to the (0, π) mode of antiparallel β-sheet structures, whose transition dipole moment M is located in parallel to both β-sheet plane and chain direction. The calculated high molecular order parameter S ≈ 0.40 suggested vertically (out-of-plane) oriented antiparallel β-sheet stacks with tilt angles of γ ≈ 39° to the surface normal. Microscale (thick) films, in contrast, revealed low order parameters S ≈ 0. Scanning force microscopy on thin eADF4 films at silicon substrates showed dewetted polymer film structures rather at the micro-scale. These findings give new insights in the role of the β-sheet crystallite orientation for the mechanical properties of spider silk materials.

Functionalized DNA-spider silk nanohydrogels for controlled protein binding and release

Hydrogels are excellent scaffolds to accommodate sensitive enzymes in a protective environment. However, the lack of suitable immobilization techniques on substrates and the lack of selectivity to anchor a biocatalyst are major drawbacks preventing the use of hydrogels in bioanalytical devices. Here, nanofilm coatings on surfaces were made of a recombinant spider silk protein (rssp) to induce rssp self-assembly and thus the formation of fibril-based nanohydrogels. To functionalize spider silk nanohydrogels for bioselective binding of proteins, two different antithrombin aptamers were chemically conjugated with the rssp, thereby integrating the target-binding function into the nanohydrogel network. Human thrombin was selected as a sensitive model target, in which the structural integrity determines its activity. The chosen aptamers, which bind various exosites of thrombin, enabled selective and cooperative embedding of the protein into the nanohydrogels. The change of the aptamer secondary structure using complementary DNA sequences led to the release of active thrombin and confirmed the addressable functionalization of spider silk nanohydrogels.

Spider Silk for Tissue Engineering Applications

Due to its properties, such as biodegradability, low density, excellent biocompatibility and unique mechanics, spider silk has been used as a natural biomaterial for a myriad of applications. First clinical applications of spider silk as suture material go back to the 18th century. Nowadays, since natural production using spiders is limited due to problems with farming spiders, recombinant production of spider silk proteins seems to be the best way to produce material in sufficient quantities. The availability of recombinantly produced spider silk proteins, as well as their good processability has opened the path towards modern biomedical applications. Here, we highlight the research on spider silk-based materials in the field of tissue engineering and summarize various two-dimensional (2D) and three-dimensional (3D) scaffolds made of spider silk. Finally, different applications of spider silk-based materials are reviewed in the field of tissue engineering in vitro and in vivo.

Structure Water-Solubility Relationship in α-Helix-Rich Films Cast from Aqueous and 1,1,1,3,3,3-Hexafluoro-2-Propanol Solutions of S. c. ricini Silk Fibroin

Silk fibroin (SF) produced by the domesticated wild silkworm, Samia cynthia ricini (S. c. ricini) is attracting increasing interest owing to its unique mechanical properties, biocompatibility, and abundance in nature. However, its utilization is limited, largely due to lack of appropriate processing strategies. Various strategies have been assessed to regenerate cocoon SF, as well as the use of aqueous liquid fibroin (LFaq) prepared by dissolution of silk dope obtained from the silk glands of mature silkworm larvae in water. However, films cast from these fibroin solutions in water or organic solvents are often water-soluble and require post-treatment to render them water-stable. Here, we present a strategy for fabrication of water-stable films from S. c. ricini silk gland fibroin (SGF) without post-treatment. Aqueous ethanol induced gelation of fibroin in the posterior silk glands (PSG), enabling its separation from the rest of the silk gland. When dissolved in 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP), the SGF-gel gave a solution from which a transparent, flexible, and water-insoluble film (SGFHFIP) was cast. Detailed structural characterization of the SGFHFIP as-cast film was carried out and compared to a conventional, water-soluble film cast from LFaq. FTIR and 13C solid-state NMR analyses revealed both cast films to be α-helix-rich. However, gelation of SGF induced by the 40%-EtOH-treatment resulted in an imperfect β-sheet structure. As a result, the SGF-gel was soluble in HFIP, but some β-sheet structural memory remains, and the SGFHFIP as-cast film obtained has some β-sheet content which renders it water-resistant. These results reveal a structure water-solubility relationship in S. c. ricini SF films that may offer useful insights towards tunable fabrication of novel biomaterials. A plausible model of the mechanism that leads to the difference in water resistance of the two kinds of α-helix-rich films is proposed.

Spider (Linothele megatheloides) and silkworm (Bombyx mori) silks: Comparative physical and biological evaluation

Silks, in particular silkworm silks, have been studied for decades as possible candidate materials for biomedical applications. Recently, great attentions have been paid to spider silks, mainly due to their unique and remarkable mechanical properties. Both materials express singular interactions with cells through specific biorecognition moieties on the core proteins making up the two silks. In this work, the silk from a Colombian spider, Linothele megatheloides (LM), which produces a single type of silk in a relatively large amount, was studied in comparison with silk from Bombyx mori silkworm, before and after degumming, with the evaluation of their chemical, mechanical and biological properties. Unexpected biological features in cell culture tests were found for the LM silk already at very early stage, so suggesting further investigation to explore its use for tailored biomedical applications.

Self-Rolling Refillable Tubular Enzyme Containers Made of Recombinant Spider Silk and Chitosan

Encapsulation of enzymes is often necessary to stabilize them against environmental conditions or to protect them from other harmful enzymes such as proteases. Here, a refillable spatial confinement system was produced using a fully degradable self-rolling biopolymer bilayer. The enzyme containers comprise spider silk and chitosan and enable one-pot reactions in the micro- to milliliter regime by trapping the enzyme inside the semipermeable tube and allow the substrate and/or product either to diffuse freely or to be entrapped. The tubes are stable toward several organic and aqueous solvents. A one-tube system with esterase-2 was used to establish the system. Further, a two-tube system was applied to mimic enzymatic cascades, where the enzymes have to be separated, because they, for example, inhibit each other. The entrapment mode was also tested in the two-tube system, which is beneficial for toxic products or for obtaining high concentrations of the desired product.

Universal nanothin silk coatings via controlled spidroin self-assembly

Robust, biocompatible, and facile coatings are promising for improving the in vivo performance of medical implants and devices. Here, we demonstrate the formation of nanothin silk coatings by leveraging the biomimetic self-assembly of eADF4(C16), an amphiphilic recombinant protein based on the Araneus diadematus dragline spidroin ADF4. These coatings result from concurrent adsorption and supramolecular assembly of eADF4(C16) induced by KH2PO4, thereby providing a mild one-pot coating strategy in which the coating rate can be controlled by protein and KH2PO4 concentration. The thickness of the coatings ranges from 2-30 nm depending on the time immersed in the aqueous coating solution. Coatings can be formed on hydrophobic and hydrophilic substrates regardless of surface chemistry and without requiring specialized surface activation. Moreover, coatings appear to be stable through vigorous rinsing and prolonged agitation in water. Grazing incidence wide angle X-ray scattering, single-molecule force spectroscopy, and Congo red staining techniques confirm the formation of β-sheet nanocrystals within the eADF4(C16) coating, which contributes to the cohesive and adhesive stability of the material. Coatings are exceptionally smooth in the dry state and are hydrophilic regardless of substrate hydrophobicity. Under aqueous conditions, nanothin silk coatings exhibit the properties of a hydrogel material.

Nanostructured, Self-Assembled Spider Silk Materials for Biomedical Applications

The extraordinary mechanical properties of spider silk fibers result from the interplay of composition, structure and self-assembly of spider silk proteins (spidroins). Genetic approaches enabled the biotechnological production of recombinant spidroins which have been employed to unravel the self-assembly and spinning process. Various processing conditions allowed to explore non-natural morphologies including nanofibrils, particles, capsules, hydrogels, films or foams. Recombinant spider silk proteins and materials made thereof can be utilized for biomedical applications, such as drug delivery, tissue engineering or 3D-biomanufacturing.

Scale-up of water-based spider silk film casting using a film applicator

Spider silk proteins for applications in drug delivery have attracted an increased interest during the past years. Some possible future medical applications for this biocompatible and biodegradable material are scaffolds for tissue engineering, implantable drug delivery systems and coatings for implants. Recently, we reported on the preparation of water-based spider silk films for drug delivery applications. In the current study, we describe the development of a manufacturing technique for casting larger spider silk films from aqueous solution employing a film applicator. Films were characterized in terms of morphology, water solubility, protein secondary structure, thermal stability, and mechanical properties. Different post-treatments were evaluated (phosphate ions, ethanol, steam sterilization and water vapor) to increase the content of β-sheets thereby achieving water insolubility of the films. Finally, the mechanical properties of the spider silk films were improved by incorporating 2-pyrrolidone as plasticizer.

Applicability of biotechnologically produced insect silks

Silks are structural proteins produced by arthropods. Besides the well-known cocoon silk, which is produced by larvae of the silk moth Bombyx mori to undergo metamorphosis inside their silken shelter (and which is also used for textile production by men since millennia), numerous further less known silk-producing animals exist. The ability to produce silk evolved multiple independent times during evolution, and the fact that silk was subject to convergent evolution gave rise to an abundant natural diversity of silk proteins. Silks are used in air, under water, or like honey bee silk in the hydrophobic, waxen environment of the bee hive. The good mechanical properties of insect silk fibres together with their non-toxic, biocompatible, and biodegradable nature renders these materials appealing for both technical and biomedical applications. Although nature provides a great diversity of material properties, the variation in quality inherent in materials from natural sources together with low availability (except from silkworm silk) impeded the development of applications of silks. To overcome these two drawbacks, in recent years, recombinant silks gained more and more interest, as the biotechnological production of silk proteins allows for a scalable production at constant quality. This review summarises recent developments in recombinant silk production as well as technical procedures to process recombinant silk proteins into fibres, films, and hydrogels.

Mechanical Testing of Engineered Spider Silk Filaments Provides Insights into Molecular Features on a Mesoscale

Spider dragline silk shows the highest toughness in comparison to all other known natural or man-made fibers. Despite a broad experimental foundation concerning the macroscopic silk thread properties as well as a thorough simulation-based molecular understanding, the impact of the mesoscale building blocks, namely nano-/submicrometer-sized filaments, on the mechanical properties of the threads remains the missing link. Here, we illustrate the function of these mesoscaled building blocks using electrospun fibers made of a recombinant spider silk protein and show the impact of β-sheet content and fiber hydration on their mechanical performance. Specifically elucidating the interplay between β-sheet-cross-linking (fiber strength) and structural water (fiber extensibility), the results bridge the gap between the molecular and the macroscopic view on the mechanics of spider silk. It is demonstrated that the extensibility of the here used single (MaSp2-like) protein system is in good accordance with the simulated extensibilities published by other groups. Furthermore, sufficient hydration of the fibers is shown to be a prerequisite to obtain a toughness in the range of that of natural dragline silk. Preliminary studies on electrospun fibers of the MaSp2-based recombinant spider silk proteins used in this work have indicated their basic applicability in the technical field of filter systems as well as in regenerative medicine. The presented work provides a fundamental understanding of the mechanical performance of such fibers under different wetting conditions, a prerequisite to further specify their potential for such applications.

Silk-based biomaterials functionalized with fibronectin type II promotes cell adhesion

The objective of this work was to exploit the fibronectin type II (FNII) module from human matrix metalloproteinase-2 as a functional domain for the development of silk-based biopolymer blends that display enhanced cell adhesion properties. The DNA sequence of spider dragline silk protein (6mer) was genetically fused with the FNII coding sequence and expressed in Escherichia coli. The chimeric protein 6mer+FNII was purified by non-chromatographic methods. Films prepared from 6mer+FNII by solvent casting promoted only limited cell adhesion of human skin fibroblasts. However, the performance of the material in terms of cell adhesion was significantly improved when 6mer+FNII was combined with a silk-elastin-like protein in a concentration-dependent behavior. With this work we describe a novel class of biopolymer that promote cell adhesion and potentially useful as biomaterials for tissue engineering and regenerative medicine.

STATEMENT OF SIGNIFICANCE

This work reports the development of biocompatible silk-based composites with enhanced cell adhesion properties suitable for biomedical applications in regenerative medicine. The biocomposites were produced by combining a genetically engineered silk-elastin-like protein with a genetically engineered spider-silk-based polypeptide carrying the three domains of the fibronectin type II module from human metalloproteinase-2. These composites were processed into free-standing films by solvent casting and characterized for their biological behavior. To our knowledge this is the first report of the exploitation of all three FNII domains as a functional domain for the development of bioinspired materials with improved biological performance. The present study highlights the potential of using genetically engineered protein-based composites as a platform for the development of new bioinspired biomaterials.

Properties of Engineered and Fabricated Silks

Silk is a protein-based material which is predominantly produced by insects and spiders. Hundreds of millions of years of evolution have enabled these animals to utilize different, highly adapted silk types in a broad variety of applications. Silk occurs in several morphologies, such as sticky glue or in the shape of fibers and can, depending on the application by the respective animal, dissipate a high mechanical energy, resist heat and radiation, maintain functionality when submerged in water and withstand microbial settling. Hence, it's unsurprising that silk piqued human interest a long time ago, which catalyzed the domestication of silkworms for the production of silk to be used in textiles. Recently, scientific progress has enabled the development of analytic tools to gain profound insights into the characteristics of silk proteins. Based on these investigations, the biotechnological production of artificial and engineered silk has been accomplished, which allows the production of a sufficient amount of silk materials for several industrial applications. This chapter provides a review on the biotechnological production of various silk proteins from different species, as well as on the processing techniques to fabricate application-oriented material morphologies.

Structural Insights into Water-Based Spider Silk Protein-Nanoclay Composites with Excellent Gas and Water Vapor Barrier Properties

Nature reveals a great variety of inorganic-organic composite materials exhibiting good mechanical properties, high thermal and chemical stability, and good barrier properties. One class of natural bio-nanocomposites, e.g. found in mussel shells, comprises protein matrices with layered inorganic fillers. Inspired by such natural bio-nanocomposites, the cationic recombinant spider silk protein eADF4(κ16) was processed together with the synthetic layered silicate sodium hectorite in an all-aqueous setup. Drop-casting of this bio-nanocomposite resulted in a thermally and chemically stable film reflecting a one-dimensional crystal. Surprisingly, this bio-nanocomposite coating was, though produced in an all-aqueous process, completely water insoluble. Analyzing the structural details showed a low inner free volume due to the well-oriented self-assembly/alignment of the spider silk proteins on the nanoclay surface, yielding high oxygen and water vapor barrier properties. The here demonstrated properties in combination with good biocompatibility qualify this new bio-nanocomposite to be used in packaging applications.

Self-Assembly of Recombinant Hagfish Thread Keratins Amenable to a Strain-Induced α-Helix to β-Sheet Transition

Hagfish slime threads are assembled from protein-based bundles of intermediate filaments (IFs) that undergo a strain-induced α-helical coiled-coil to β-sheet transition. Draw processing of native fibers enables the creation of mechanically tuned materials, and under optimized conditions this process results in mechanical properties similar to spider dragline silk. In this study, we develop the foundation for the engineering of biomimetic recombinant hagfish thread keratin (TK)-based materials. The two protein constituents from the hagfish Eptatretus stoutii thread, named EsTKα and EsTKγ, were expressed in Escherichia coli and purified. Individual (rec)EsTKs and mixtures thereof were subjected to stepwise dialysis to evaluate their protein solubility, folding, and self-assembly propensities. Conditions were identified that resulted in the self-assembly of coiled-coil rich IF-like filaments, as determined by circular dichroism (CD) and transmission electron microscopy (TEM). Rheology experiments indicated that the concentrated filaments assembled into gel-like networks exhibiting a rheological response reminiscent to that of IFs. Notably, the self-assembled filaments underwent an α-helical coiled-coil to β-sheet transition when subjected to oscillatory shear, thus mimicking the critical characteristic responsible for mechanical strengthening of native hagfish threads. We propose that our data establish the foundation to create robust and tunable recombinant TK-based materials whose mechanical properties are controlled by a strain-induced α-helical coiled-coil to β-sheet transition.

The effect of steam sterilization on recombinant spider silk particles

In this work, the recombinant spider silk protein eADF4(C16) was used to fabricate particles in the submicron range using a micromixing method. Furthermore, particles in the micrometer range were produced using an ultrasonic atomizer system. Both particle species were manufactured by an all-aqueous process. The submicroparticles were 332 nm in average diameter, whereas 6.70 μm was the median size of the microparticles. Both particle groups showed a spherical shape and exhibited high β-sheet content in secondary structure. Submicro- and microparticles were subsequently steam sterilized and investigated with respect to particle size, secondary structure and thermal stability. Sterilization temperature and time were increased to assess the thermal stability of eADF4(C16) particles. Actually, particles remained stable and their properties did not change even after autoclaving at 134°C. Both, the untreated and the autoclaved submicroparticles showed no overt cytotoxicity on human dermal fibroblasts after incubation for 72 h. The eADF4(C16) particles were already loaded with proteins and small molecules in previous studies. With that, we can provide a highly promising parenteral drug delivery system based on a defined polypeptide carrier, manufactured with an all-aqueous process and being fully sterilizable.

Coatings and films made of silk proteins

Silks are a class of proteinaceous materials produced by arthropods for various purposes. Spider dragline silk is known for its outstanding mechanical properties, and it shows high biocompatibility, good biodegradability, and a lack of immunogenicity and allergenicity. The silk produced by the mulberry silkworm B. mori has been used as a textile fiber and in medical devices for a long time. Here, recent progress in the processing of different silk materials into highly tailored isotropic and anisotropic coatings for biomedical applications such as tissue engineering, cell adhesion, and implant coatings as well as for optics and biosensors is reviewed.

Controlled hierarchical assembly of spider silk-DNA chimeras into ribbons and raft-like morphologies

Spider silk-DNA conjugates comprising the recombinant spider silk protein eADF4(C16) and short oligonucleotides were arranged in a linear antiparallel and parallel as well as in a branched manner via designed complementarity of the DNA moieties. After cross-β fibril self-assembly, temperature-induced annealing of the DNA moieties triggered fibril association into ribbons, composed of aligned nanofibrils, and rafts composed of ribbons ordered into sharply bordered, squared fibrous microstructures. The formation of the superstructures was clearly dependent on the individual silk-DNA conjugate. A combination of 5'-conjugated silk moieties via complementary nucleic acids enhanced fibril association, whereas mixing complementary 5'- and 3'-silk conjugates inhibited the formation of higher-order structures.

Nanomaterial building blocks based on spider silk-oligonucleotide conjugates

Self-assembling protein nanofibrils are promising structures for the "bottom-up" fabrication of bionanomaterials. Here, the recombinant protein eADF4(C16), a variant of Araneus diadematus dragline silk ADF4, which self-assembles into nanofibrils, and short oligonucleotides were modified for site-specific azide-alkyne coupling. Corresponding oligonuleotide-eADF4(C16) "click" conjugates were hybridized in linear or branched fashion according to the designed complementarities of the DNA moieties. Self-assembly properties of higher ordered structures of the spider silk-DNA conjugates were dominated by the silk component. Assembled β-sheet rich conjugate fibrils were similar in appearance to fibrils of unmodified eADF4(C16) but enabled the specific attachment of neutravidin-modified gold nanoparticles on their surface directed by complementary biotin-oligonucleotides, providing the basis for functionalization of such conjugates.

Complex gene expression in the dragline silk producing glands of the Western black widow (Latrodectus hesperus)

Background

Orb-web and cob-web weaving spiders spin dragline silk fibers that are among the strongest materials known. Draglines are primarily composed of MaSp1 and MaSp2, two spidroins (spider fibrous proteins) expressed in the major ampullate (MA) silk glands. Prior genetic studies of dragline silk have focused mostly on determining the sequence of these spidroins, leaving other genetic aspects of silk synthesis largely uncharacterized.

Results

Here, we used deep sequencing to profile gene expression patterns in the Western black widow, Latrodectus hesperus. We sequenced millions of 3′-anchored “tags” of cDNAs derived either from MA glands or control tissue (cephalothorax) mRNAs, then associated the tags with genes by compiling a reference database from our newly constructed normalized L. hesperus cDNA library and published L. hesperus sequences. We were able to determine transcript abundance and alternative polyadenylation of each of three loci encoding MaSp1. The ratio of MaSp1:MaSp2 transcripts varied between individuals, but on average was similar to the estimated ratio of MaSp1:MaSp2 in dragline fibers. We also identified transcription of TuSp1 in MA glands, another spidroin family member that encodes the primary component of egg-sac silk, synthesized in tubuliform glands. In addition to the spidroin paralogs, we identified 30 genes that are more abundantly represented in MA glands than cephalothoraxes and represent new candidates for involvement in spider silk synthesis.

Conclusions

Modulating expression rates of MaSp1 variants as well as MaSp2 and TuSp1 could lead to differences in mechanical properties of dragline fibers. Many of the newly identified candidate genes likely encode secreted proteins, suggesting they could be incorporated into dragline fibers or assist in protein processing and fiber assembly. Our results demonstrate previously unrecognized transcript complexity in spider silk glands.