Self-Assembly of Core-Shell Hybrid Nanoparticles by Directional Crystallization of Grafted Polymers

Nanoparticle self-assembly is an efficient bottom-up strategy for the creation of nanostructures. In a typical approach, ligands are grafted onto the surfaces of nanoparticles to improve the dispersion stability and control interparticle interactions. Ligands then remain secondary and usually are not expected to order significantly during superstructure formation. Here, we investigate how ligands can play a more decisive role in the formation of anisotropic inorganic-organic hybrid materials. We graft poly(2-iso-propyl-2-oxazoline) (PiPrOx) as a crystallizable shell onto SiO2 nanoparticles. By varying the PiPrOx grafting density, both solution stability and nanoparticle aggregation behavior can be controlled. Upon prolonged heating, anisotropic nanostructures form in conjunction with the crystallization of the ligands. Self-assembly of hybrid PiPrOx@SiO2 (shell@core) nanoparticles proceeds in two steps: First, the rapid formation of amorphous aggregates occurs via gelation, mediated by the interaction between nanoparticles through grafted polymer chains. As a second step, slow radial growth of fibers was observed via directional crystallization, governed by the incorporation of crystalline ribbons formed from free polymeric ligands in combination with crystallization of the covalently attached ligand shell. Our work reveals how crystallization-driven self-assembly of ligands can create intricate hybrid nanostructures.

Solvent electrospinning amorphous solid dispersions with high itraconazole, celecoxib, mebendazole and fenofibrate drug loading and release potential

In this work, the feasibility of ultra-high drug loaded amorphous solid dispersions (ASDs) for the poorly soluble itraconazole, mebendazole and celecoxib via solvent electrospinning in combination with poly(2-ethyl-2-oxazoline) and fenofibrate in combination with polyvinylpyrrolidone is demonstrated. By lowering the polymer concentration in the electrospinning solution below its individual spinnable limit, ASDs with a drug content of up to 80 wt% are obtained. This is attributed to drug-polymer interactions not being limited by default to hydrogen bonds, as also Van der Waals interactions can result in high drug loadings. The theoretically predicted miscibility by the Flory-Huggins theory is corroborated by the experimental findings based on (modulated) differential scanning calorimetry and x-ray diffraction. Globally, the maximally obtained amorphous drug loadings are higher compared to the loadings found in literature. Additionally, non-sink dissolution tests demonstrate an increase in solubility of up to 50 times compared to their crystalline counterparts. Moreover, due to the lack of precipitation biocompatible PEtOx succeeds in stabilizing the dissolved drug and inhibiting its instant precipitation. The current work thus demonstrates the broader applicability of the electrospinning technique for the production of physically stable ASDs with ultra-high drug loadings, a result which has been validated for several Biopharmaceutics Classification System class II drugs.

Thiophene α-Chain-End-Functionalized Oligo(2-methyl-2-oxazoline) as Precursor Amphiphilic Macromonomer for Grafted Conjugated Oligomers/Polymers and as a Multifunctional Material with Relevant Properties for Biomedical Applications

Because the combination of π-conjugated polymers with biocompatible synthetic counterparts leads to the development of bio-relevant functional materials, this paper reports a new oligo(2-methyl-2-oxazoline) (OMeOx)-containing thiophene macromonomer, denoted Th-OMeOx. It can be used as a reactive precursor for synthesis of a polymerizable 2,2'-3-OMeOx-substituted bithiophene by Suzuki coupling. Also a grafted polythiophene amphiphile with OMeOx side chains was synthesized by its self-acid-assisted polymerization (SAAP) in bulk. The results showed that Th-OMeOx is not only a reactive intermediate but also a versatile functional material in itself. This is due to the presence of 2-bromo-substituted thiophene and ω-hydroxyl functional end-groups, and due to the multiple functionalities encoded in its structure (photosensitivity, water self-dispersibility, self-assembling capacity). Thus, analysis of its behavior in solvents of different selectivities revealed that Th-OMeOx forms self-assembled structures (micelles or vesicles) by "direct dissolution".Unexpectedly, by exciting the Th-OMeOx micelles formed in water with λabs of the OMeOx repeating units, the intensity of fluorescence emission varied in a concentration-dependent manner.These self-assembled structures showed excitation-dependent luminescence as well. Attributed to the clusteroluminescence phenomenon due to the aggregation and through space interactions of electron-rich groups in non-conjugated, non-aromatic OMeOx, this behavior certifies that polypeptides mimic the character of Th-OMeOx as a non-conventional intrinsic luminescent material.

Unravelling the Miscibility of Poly(2-oxazoline)s: A Novel Polymer Class for the Formulation of Amorphous Solid Dispersions

Water-soluble polymers are still the most popular carrier for the preparation of amorphous solid dispersions (ASDs). The advantage of this type of carrier is the fast drug release upon dissolution of the water-soluble polymer and thus the initial high degree of supersaturation of the poorly soluble drug. Nevertheless, the risk for precipitation due to fast drug release is a phenomenon that is frequently observed. In this work, we present an alternative carrier system for ASDs where a water-soluble and water-insoluble carrier are combined to delay the drug release and thus prevent this onset of precipitation. Poly(2-alkyl-2-oxazoline)s were selected as a polymer platform since the solution properties of this polymer class depend on the length of the alkyl sidechain. Poly(2-ethyl-2-oxazoline) (PEtOx) behaves as a water-soluble polymer at body temperature, while poly(2-n-propyl-2-oxazoline) (PPrOx) and poly(2-sec-butyl-2-oxazoline) (PsecBuOx) are insoluble at body temperature. Since little was known about the polymer’s miscibility behaviour and especially on how the presence of a poorly-water soluble drug impacted their miscibility, a preformulation study was performed. Formulations were investigated with X-ray powder diffraction, differential scanning calorimetry (DSC) and solid-state nuclear magnetic resonance spectroscopy. PEtOx/PPrOx appeared to form an immiscible blend based on DSC and this was even more pronounced after heating. The six drugs that were tested in this work did not show any preference for one of the two phases. PEtOx/PsecBuOx on the other hand appeared to be miscible forming a homogeneous blend between the two polymers and the drugs.

Environment-Friendly Poly(2-ethyl-2-oxazoline) as an Innovative Consolidant for Ancient Wall Paintings

The research of innovative materials on the conservation of ancient wall paintings has given rise to increased attention in recent years. One of the most used synthetic organic consolidation material for the wall paintings is the commercial acrylic resin Paraloid B72 (PB 72), which encounters problems of the use of toxic solvents, low water vapor transmission, and poor penetration. Here, the non-toxic, environment-friendly product poly(2-ethyl-2-oxazoline) (PEOX) has been demonstrated as a great potential consolidant for wall paintings to solve these issues. First of all, thanks to the better penetration ability, the simulating plaster sample treated with PEOX shows greater enhanced surface hardness than PB 72. The single-lap joint shear strength test and the scotch tape test revealed the good adhesion of PEOX on inorganic surfaces and effective pigment consolidation. At the same time, the PEOX-treated sample presents less surface gloss. The hydrophilic nature of PEOX merits itself with superior water vapor permeability compared with PB 72. These advantages enable PEOX to be a progressive choice to replace the use of PB 72 in the controlled indoor working environment.

Insights into the thermal phase transition behavior of a gemini dicationic polyelectrolyte in aqueous solution

The thermal-induced phase transition behavior of a LCST-type poly(ionic liquid) (PIL) aqueous solution with gemini-cationic structure, poly[(1,8-octanediyl-bis(tri-n-butylphosphonium)4-styrene sulfonate)] (P[SS-P2]), was investigated in this paper. Based on the calorimetric measurements, a unique dependence of transition points on concentration was found in P[SS-P2] aqueous solution compared to its mono-cationic PIL and [SS-P2] aqueous solution. Optical microscopy showed that globular microscopic droplets were formed during the phase transition, suggesting that gemini dications and the possible dynamic ionic bonds may facilitate the liquid-liquid phase separation (LLPS) in P[SS-P2] aqueous solution. Temperature-variable 1H NMR and FT-IR investigations manifested that the dehydration of anionic chains instead of the dehydration of dications served as the driving force of the phase separation in the P[SS-P2] aqueous solution, implying that the polymerized anions tended to aggregate together first and lay in the core with dications distributed around the globules at the end of the transition process. Notably, considering that the SO3 groups in the gemini-cationic system tended to be distributed around the surface of collapsed anionic main chains rather than be wrapped into the aggregates, it is supposed that dynamic ionic bonding between dication and anionic backbones was distributed in the periphery of the globules and acted as the "cross-linkers", which enhanced the stability of regular droplets after the phase transition in P[SS-P2] aqueous solution.

From globules to crystals: a spectral study of poly(2-isopropyl-2-oxazoline) crystallization in hot water

One easy strategy to comprehend the complex folding/crystallization behaviors of proteins is to study the self-assembly process of their synthetic polymeric analogues with similar properties owing to their simple structures and easy access to molecular design. Poly(2-isopropyl-2-oxazoline) (PIPOZ) is often regarded as an ideal pseudopeptide with similar two-step crystallization behavior to proteins, whose aqueous solution experiences successive lower critical solution temperature (LCST)-type liquid-liquid phase separation upon heating and irreversible crystallization when annealed above LCST for several hours. In this paper, by microscopic observations, IR and Raman spectroscopy in combination with 2D correlation analysis, we show that the second step of PIPOZ crystallization in hot water can be further divided into two apparent stages, i.e., nucleation and crystal growth, and perfect crystalline PIPOZ chains are found to only develop in the second stage. While all the groups exhibit changes in initial nucleation, only methylene groups on the backbone participate in the crystal growth stage. During nucleation, a group motion transfer is found from the side chain to the backbone, and nucleation is assumed to be mainly driven by the cleavage of bridging C=O···D-O-D···O=C hydrogen bonds followed by chain arrangement due to amide dipolar orientation. Nevertheless, during crystal growth, a further chain ordering process occurs resulting in the final formation of crystalline PIPOZ chains with partial trans conformation of backbones and alternative side chains on the two sides. The underlying crystallization mechanism of PIPOZ in hot water we present here may provide very useful information for understanding the crystallization of biomacromolecules in biological systems.

Conformational changes in the heat-induced crystallization of poly(2-isopropyl-2-oxazoline) in the solid state

Poly(2-isopropyl-2-oxazoline) (PIPOZ) with an isomeric structure of poly(N-isopropylacrylamide) (PNIPAM) represents an important class of stimuli-responsive synthetic polymers. Unlike PNIPAM, PIPOZ exhibits an unusual heat-induced crystallization behaviour at around 120 °C in the solid state, whose dynamic mechanism involving all group motions and conformational changes is still poorly understood. In this paper, IR spectroscopy in combination with two-dimensional analysis methods - the perturbation correlation moving window (PCMW) and two-dimensional correlation spectroscopy (2DCOS) - was used to monitor and study the conformational changes in the crystallization of PIPOZ in the solid state. The incorporated water molecules are found to be not necessary to assist the solid-state crystallization of the PIPOZ film. PCMW and 2DCOS analyses reveal that following the breaking of minor CH3O[double bond, length as m-dash]C hydrogen bonds, all the group moieties exhibit highly synergetic motions during crystallization, and methylene groups on the backbone do not show significant changes throughout the crystallization process. Raman spectroscopic and molecular dynamics simulation results further support this conclusion. The chain alignment of PIPOZ chains is shown to be mainly achieved by the lateral distortion of coplanar side chains or the ordered chain arrangement of amide dipoles together with the torsion of the backbone through C-N linkages. Upon heating, gauche conformations of methylene groups on the backbone are always dominating, resulting in an ordered PIPOZ chain with alternate side chains and a slightly distorted backbone.

Molecular Evolution of Poly(2-isopropyl-2-oxazoline) Aqueous Solution during the Liquid-Liquid Phase Separation and Phase Transition Process

A detailed phase transition process of poly(2-isopropyl-2-oxazoline) (PIPOZ) in aqueous solution was investigated by means of DSC, temperature-variable (1)H NMR, Raman, optical micrographs, and FT-IR spectroscopy measurements. Gradual phase separation accompanied by large dehydration degree and big conformational changes above the lower critical solution temperature (LCST) and facile reversibility were identified. Based on the two-dimensional correlation (2Dcos) and perturbation correlation moving window (PCMW) analyses, the sequence order of chemical group motions in phase transition process was elucidated. Additionally, a newly assigned CH3···O═C intermolecular hydrogen bond at 3008 cm(-1) in the PIPOZ system provides extra information on the interactions between C-H and C═O groups. The formation of cross-linking "bridging" hydrogen bonds C═O···D-O-D···O═C (1631 cm(-1)) is proposed as the key process to induce the liquid-liquid phase separation and polymer-rich phase formation of PIPOZ solution. With slow heating, more and more "bridging" hydrogen bonds were formed and D2O were expelled with an ordered and mostly all-trans conformation adopted in the PIPOZ chains. On the basis of these observations, a physical picture on the molecular evolution of PIPOZ solution during the phase transition process has been derived.

Crystallisation-driven self-assembly of poly(2-isopropyl-2-oxazoline)-block-poly(2-methyl-2-oxazoline) above the LCST

The solution behaviour in water of a polyoxazoline-type block copolymer, namely poly(2-isopropyl-2-oxazoline)-block-poly(2-methyl-2-oxazoline), denoted as P(iPrOx-b-MeOx), above the lower critical solution temperature (LCST) of the PiPrOx block was exploited to induce a temporary or permanent self-assembly. Spherical micelles were first obtained and could be disassembled in a reversible manner when kept for a short period of time (i.e. t < 90 min) above the LCST, and cooled down to room temperature. In contrast, annealing the copolymer solution for more than 90 min at 65 °C induced the crystallisation of the PiPrOx block, as evidenced by wide angle X-ray scattering (WAXS) experiments. This crystallisation-driven self-assembly phenomenon resulted in different morphologies, including spherical and distorted crystallised micelles and micron-size fibers, their relative proportion varies with the annealing time. Formation of micron-size range fiber-like structures might be explained by the re-organization of parent crystallised micelles. The crystal structure, as determined by WAXS, appeared to be identical to that of the PiPrOx homopolymer.

Structural investigation of thermo-responsive poly(2-isopropyl-2-oxazoline) hydrogel across the volume phase transition

The deswelling and swelling behaviors of poly(2-isopropyl-2-oxazoline)-based hydrogel synthesized by a one-pot microwave-assisted solvent-free reaction were investigated. A distinct hydrophobic collapse of the hydrogel compared with the corresponding aqueous solution was observed by FT-IR spectroscopy combined with two-dimensional correlation spectroscopy (2DCOS) and perturbation-correlation moving-window (PCMW) analyses. The volume phase transition (VPT) temperature of 35 °C during heating and the transition temperature range of 41-30 °C during cooling were determined, indicating different dynamic transition mechanisms during heating and cooling. Water expulsion starting from the benzene ring-centered hydrophobic spots to the surroundings was revealed during deswelling. However, during swelling, although the rebuilding of cross-linking hydrogen bond bridges provided a channel-like microstructure to reswell the hydrogel gradually, a slow, unusual recovery of the amide hydrogen bonds to water molecules was observed.

Water uptake of poly(2-N-alkyl-2-oxazoline)s: temperature-dependent Fourier transform infrared (FT-IR) spectroscopy and two-dimensional correlation analysis (2DCOS)

A library of poly(2-oxazoline)s with varying length of the alkyl side-chain has been investigated by variable-temperature Fourier transform infrared (FT-IR) spectroscopy. These polymers are suitable for studies of structure-property relationships as their cationic ring-opening polymerization and the relatively facile monomer synthesis enable a control of the molecular structure. In this contribution, the number of carbon atoms in the linear side-chain is systematically varied from a short methyl to a long nonyl group. Previous studies showed that the sample library can be split in two groups: poly(2-oxazoline)s with a short side-chain (methyl-, ethyl-, and isopropyl-) exhibit hygroscopic behavior, while those with longer side-groups (butyl- and longer) were found to be semi-crystalline. To gain further insight into the mechanisms of hydrogen bonding and crystallization, temperature-dependent infrared (IR) spectroscopy has been applied in the current study. The processes involved have been monitored by generalized two-dimensional correlation spectroscopy (2DCOS) and perturbation-correlation moving-window two-dimensional correlation spectroscopy (PCMW2D) in the C=O stretching region around 1645 cm(-1). These advanced analysis techniques provided valuable additional information on the material behavior during heating. As water is removed from the samples in the course of the heating process, it was possible to clearly distinguish between "loosely associated" and hydrogen-bonded water. Furthermore, the melting process of the semi-crystalline samples could be depicted. For the poly(2-isopropyl-2-oxazoline) even a crystallization process could be monitored in the temperature range between glass transition and melting.