Preparation of AAO-CeO2 nanotubes and their application in electrochemical oxidation desulfurization of diesel

The coaxial arrays of AAO-CeO₂ NTs have been successfully galvanostatically deposited on an anode, characterized and adopted as a catalyst for removing organic sulfurs from diesel. The influence of the main electrochemical oxidation factors on the efficiency of desulfurization have also been investigated. The results show that the fabrication process of AAO-CeO₂ NTs is accompanied by the formation of a new phase, namely Al₃Ce, and the main oxidation products of the diesel are soluble inorganic sulphides, especially Ce₂(SO₄)₃. When compared with dibenzothiophene and 4, 6-dimethyldibenzothiophene, benzothiophene is much more easily removed, with a removal efficiency that reaches 87.2%. Finally, a possible electrochemical oxidation desulfurization pathway for diesel is proposed.

Rapid synthesis of hybrids and hollow PdO nanostructures by controlled in situ dissolution of a ZnO nanorod template: insights into the formation mechanism and thermal stability

Hollow nanomaterials have attracted a lot of interest by virtue of their wide range of applications that arise primarily due to their unique architecture. A common strategy to synthesize hollow nanomaterials is by nucleation of the shell material over a preformed core and subsequent dissolution of the core in the second step. Herein an ultrafast, microwave route has been demonstrated, to synthesize PdO nanotubes in a single step using ZnO as a sacrificial template. The mechanism of the nanotube formation has been investigated in detail using control experiments. By tuning the starting ratio of PdCl2 : ZnO, hollow to hybrid PdO nanostructures could be obtained using the same method. Conversion of the PdO to Pd nanotubes has been shown by simple NaBH4 treatment. The thermal stability of the PdO nanotubes has been studied. The insights presented here are general and applicable for the synthesis of hybrids/hollow structures in other systems as well.

Bifunctional Ce(1-x)Eu(x)O2 (0 ≤x≤ 0.3) nanoparticles for photoluminescence and photocatalyst applications: an X-ray absorption spectroscopy study

Ce1-xEuxO2 (0 ≤x≤ 0.3) nanoparticles (NPs) were synthesized by the chemical precipitation method. The microstructures and morphology were characterized by synchrotron X-ray diffraction and high resolution transmission electron microscopy. X-ray absorption near edge structure (XANES) spectra at the Eu M5,4-edge and atomic-multiplet calculations revealed that Eu(3+) was predominantly present in the CeO2 lattice and Eu(2+) was negligibly present within the entire doping range. The detailed analysis of the Ce M5,4-edge and the O K-edge has shown strong dependence of the Ce(3+)/Ce(4+) ratio and oxygen vacancy with Eu content. Extended X-ray absorption fine structure (EXAFS) spectra at the Ce K-edge, along with theoretical fitting, have shown systematic variation in the coordination number, bond length and Debye-Waller factor with Eu doping. A blue shift in the absorption edge was observed which implies a net increase in the charge transfer gap between the O 2p and Ce 4f bands due to the increased number of Ce(3+) ions in the Eu doped samples. The excitation and emission spectra of pure CeO2 NPs did not show any photoluminescence (PL) characteristic; however, Ce1-xEuxO2 (x = 0.1-0.3) NPs showed significant improvements in the 4f-4f, (5)D0-(7)F2 and (5)D0-(7)F1 transitions induced luminescence properties. Eu doping has two major effects on the electronic structure and optical properties of CeO2 NPs: the first, at an Eu content of 10 mol%, is the formation of Ce(4+)-O-Eu(3+) networks, i.e., Eu(3+) ions substitute the Ce(4+) ions and introduce oxygen vacancies and Ce(3+) ions in the host lattice, which favors the (5)D0-(7)F2 induced PL properties. The other, at an Eu doping over 10 mol%, is the formation of both Ce(4+)-O-Eu(3+) and Ce(3+)-O-Eu(3+), i.e., Eu(3+) ions not only take substitutional sites of Ce(4+) ions but also replace a fraction of Ce(3+) ions in the CeO2 lattice which favors (5)D0-(7)F1 induced PL properties. As an application of CeO2 NPs towards the degradation of water pollutants, we demonstrated that the Ce1-xEuxO2 (0 ≤x≤ 0.3) NPs can serve as effective photocatalyst materials towards the degradation of the methyl-orange aqueous pollutant dye under UV light irradiation.

Fabrication of CeO2 nanotube supported Pt catalyst encapsulated with silica for high and stable performance

This communication describes the fabrication of Pt/CeO2 nanotube@SiO2 core-shell catalysts applied to highly efficient water-gas shift reaction, where the initial CO conversion is 30.2% at 250 °C. Pt/CeO2 nanotube@SiO2 core-shell catalysts show outstanding thermal stability, even after accelerated aging under reaction conditions at 450 °C for 6 h, and the morphology is also unchanged after thermal treatment at 800 °C.

Template engaged synthesis of hollow ceria-based composites

Hollow ceria-based composites, which consist of noble metal nanoparticles or metal oxides as a secondary component, are being studied extensively for potential applications in heterogeneous catalysis. This is due to their unique features, which exhibit the advantages of a hollow structure (e.g. high surface area and low weight), and also integrate the properties of ceria and noble metals/metal oxides. More importantly, the synergistic effect between constituents in hollow ceria-based composites has been demonstrated in various catalytic reactions. In this feature article, we summarize the state-of-the-art in the synthesis of hollow ceria-based composites, including traditional hard-templates and more recently, sacrificial-template engaged strategies, highlighting the key role of selected templates in the formation of hollow composites. In addition, the catalytic applications of hollow ceria-based composites are briefly surveyed. Finally, challenges and perspectives on future advances of hollow ceria-based composites are outlined.

Morphology adjustment of one dimensional CeO2 nanostructures via calcination and their composite with Au nanoparticles towards enhanced catalysis

1D CeO₂ nanostructures with various morphologies and their composites with Au nanoparticles were fabricated via electrospinning and a subsequent calcination process.

Facile preparation of well-dispersed CeO2-ZnO composite hollow microspheres with enhanced catalytic activity for CO oxidation

In this article, well-dispersed CeO2-ZnO composite hollow microspheres have been fabricated through a simple chemical reaction followed by annealing treatment. Amorphous zinc-cerium citrate hollow microspheres were first synthesized by dispersing zinc citrate hollow microspheres into cerium nitrate solution and then aging at room temperature for 1 h. By calcining the as-produced zinc-cerium citrate hollow microspheres at 500 °C for 2 h, CeO2-ZnO composite hollow microspheres with homogeneous composition distribution could be harvested for the first time. The resulting CeO2-ZnO composite hollow microspheres exhibit enhanced activity for CO oxidation compared with CeO2 and ZnO, which is due to well-dispersed small CeO2 particles on the surface of ZnO hollow microspheres and strong interaction between CeO2 and ZnO. Moreover, when Au nanoparticles are deposited on the surface of the CeO2-ZnO composite hollow microspheres, the full CO conversion temperature of the as-produced 1.0 wt % Au-CeO2-ZnO composites reduces from 300 to 60 °C in comparison with CeO2-ZnO composites. The significantly improved catalytic activity may be ascribed to the strong synergistic interplay between Au nanoparticles and CeO2-ZnO composites.

Searching for cheaper catalysts with high activity and stability in Ce–M–O systems (M = Fe, Co, Ni)

A cheaper catalyst with enhanced catalytic activity and stability was investigated among Ce–M–O (M = Fe, Co, Ni) systems.

Shape-controlled synthesis and catalytic application of ceria nanomaterials

Because of their excellent properties and extensive applications, ceria nanomaterials have attracted much attention in recent years. This perspective provides a comprehensive review of current research activities that focus on the shape-controlled synthesis methods of ceria nanostructures. We elaborate on the synthesis strategies in the following four sections: (i) oriented growth directed by the crystallographic structure of cerium-based materials; (ii) oriented growth directed by the use of an appropriate capping reagent; (iii) growth confined or dictated by various templates; (iv) other potential methods for generating CeO(2) nanomaterials. In this perspective, we also discuss the catalytic applications of ceria nanostructures. They are often used as active components or supports in many catalytic reactions and their catalytic activities show morphology dependence. We review the morphology dependence of their catalytic performances in carbon monoxide oxidation, water-gas shift, nitric oxide reduction, and reforming reactions. At the end of this review, we give a personal perspective on the probable challenges and developments of the controllable synthesis of CeO(2) nanomaterials and their catalytic applications.