Tuning Contact Angles of Aqueous Droplets on Hydrophilic and Hydrophobic Surfaces by Surfactants

Adsorption of small amphiphilic molecules occurs in various biological and technological processes, sometimes desired while other times unwanted (e.g., contamination). Surface-active molecules preferentially bind to interfaces and affect their wetting properties. We use molecular dynamics simulations to study the adsorption of short-chained alcohols (simple surfactants) to the water–vapor interface and solid surfaces of various polarities. With a theoretical analysis, we derive an equation for the adsorption coefficient, which scales exponentially with the molecular surface area and the surface wetting coefficient and is in good agreement with the simulation results. We apply the outcomes to aqueous sessile droplets containing surfactants, where the competition of surfactant adsorptions to both interfaces alters the contact angle in a nontrivial way. The influence of surfactants is the strongest on very hydrophilic and hydrophobic surfaces, whereas droplets on moderately hydrophilic surfaces are less affected.

Hyperbranched polyethylenimine-modified polyethersulfone (HPEI/PES) and nAg@HPEI/PES membranes with enhanced ultrafiltration, antibacterial, and antifouling properties

This study reports a simple fabrication of polyethersulfone (PES)-based membranes, their characterisation, and application. These membranes are modified with hyperbranched polyethyleneimine (HPEI) and -silver (nAg)-decorated HPEI. These were then compared for filtration, organic fouling, antifouling, and antibacterial properties against the neat PES membrane. The fabricated membranes were characterised for their chemistry using attenuated transmission reflectance-equipped Fourier transform infrared spectroscopy (ATR-FTIR) and x-ray photoelectron spectroscopy (XPS). As such, the presence of HPEI interactions between the nAg and HPEI in the membranes was confirmed. An energy-dispersive x-ray detector coupled with a scanning electron microscopy (SEM-EDS) and atomic force microscopy (AFM) were used to study morphological, compositional, topographical, and topological changes to the membrane due to the modifications. A thermogravimetric analyser (TGA) was also utilised to evaluate the effect of modification on thermal stability of the resulting membranes. Optical contact angle (OCA) interrogated the extent of membrane/water interactions which indicated enhanced hydrophilicity due to the modification. Dead-end filtration using these membranes indicated enhanced pure water permeate fluxes and protein rejection (bovine serum albumin, BSA). The results of the BSA rejection for the HPEI/PES membranes were a maximum of 98% while those of the nAg@HPEI/PES ranged between 30-87%. The membranes possessed high flux recoveries, indicating great potential for the membranes for antifouling applications in water treatment. Extensive antibacterial studies were carried out on the membranes to probe bioactivity. Enhanced activity was recorded (except for neat PES) with zone inhibitions of up to 7 mm against five bacterial strains including E. Coli and K. Pneumoniae as found in several wastewater streams. The antibacterial properties of these membranes mean they can prolong membrane operational lifetime by mitigating biofilming during water treatment.

•

New flat sheet membranes possessing both organic antifouling and antibacterial properties were fabricated.

•

The successive modification of PES with HPEI and nAg resulted in enhanced membrane properties.

•

Most of the membranes exhibited good antibacterial activities against the bacterial strains tested.

•

Membrane samples with nAg also displayed good antibacterial activities against bacteria E Coli.

•

The use of cost friendly HPEI and low levels of modification, and ease of membrane fabrication was achieved.

Graphene Oxide-Functionalized Membranes: The Importance of Nanosheet Surface Exposure for Biofouling Resistance

Surface functionalization using two-dimensional (2D) graphene oxide (GO) materials is a promising technique to enhance the biofouling resistance of membranes used in water purification and reuse. However, the role of GO exposure, which is crucial for the contact-mediated toxicity mechanism, has not been well evaluated or elucidated in previous studies. Herein, we employ bioinspired polydopamine chemistry to fabricate GO-functionalized membranes through two strategies: coating and blending. The two types of GO-functionalized membranes displayed comparable roughness, hydrophilicity, water permeability, and solute retention properties but different degrees of GO nanosheet exposure on the membrane surface. When in contact with the model bacterium, Escherichia coli, the GO-coated membrane exhibited enhanced biofouling resistance compared to that of the GO-blended membrane, as evidenced by lower viable cells in static adsorption experiments, and lower water flux decline and higher flux recovery in dynamic biofouling experiments. Moreover, the development of biofilm on the GO-coated membrane was also inhibited to a greater extent than on the GO-blended membrane. Taken together, our findings indicate the paramount importance of GO exposure on the membrane surface in conferring antibacterial activity and biofouling resistance, which should be considered in the future design of antibiofouling membranes using 2D nanomaterials.

Investigations on the Properties and Performance of Mixed-Matrix Polyethersulfone Membranes Modified with Halloysite Nanotubes

Ultrafiltration (UF) polyethersulfone (PES) membranes were prepared by wet phase inversion method. Commercial halloysite nanotubes (HNTs) in the amount of 0.5–4 wt % vs PES (15 wt %) were introduced into the casting solution containing the polymer and N,N-dimethylformamide as a solvent. The morphology, physicochemical properties and performance of the membranes were characterized by scanning electron microscopy (SEM) and atomic force microscopy (AFM), zeta potential, porosity and contact angle analyses, as well as permeability measurements. Moreover, the antifouling properties of the membranes were evaluated during UF of a model solution of bovine serum albumin (BSA). The research revealed a positive influence of modification with HNTs on hydrophilicity, water permeability and antifouling properties of the PES membranes. The most significant improvement of permeability was obtained in case of the membrane containing 2 wt % of HNTs, whereas the highest fouling resistance was observed for 0.5 wt % HNTs content. It was found that a good dispersion of HNTs can be obtained only at loadings below 2 wt %. Based on the results a relation between severity of membrane fouling and surface roughness was proved. Moreover, an increase of the roughness of the modified membranes was found to be accompanied by an increase of isoelectric point values.

Concentration and Recovery of Dyes from Textile Wastewater Using a Self-Standing, Support-Free Forward Osmosis Membrane

Forward osmosis (FO) can potentially treat textile wastewaters with less fouling than pressure-driven membrane processes such as reverse osmosis and nanofiltration. However, conventional FO membranes with asymmetric architecture experience severe flux decline caused by internal concentration polarization and fouling as dye molecules accumulate on the membrane surface. In this study, we present a new strategy for concentrating dye by using a self-standing, support-free FO membrane with a symmetric structure. The membrane was fabricated by a facile solution-casting approach based on a poly(triazole- co-oxadiazole- co-hydrazine) (PTAODH) skeleton. Due to its dense architecture, ultrasmooth surface, and high negative surface charge, the PTAODH membrane exhibits excellent FO performance with minimal fouling, low reverse salt flux, and negligible dye passage to the draw solution side. Cleaning with a 40% alcohol solution, after achieving a concentration factor of ∼10, resulted in high flux recovery ratio (98.7%) for the PTAODH membrane, whereas significant damage to the active layers of two commercial FO membranes was observed. Moreover, due to the existence of cytotoxic oxadiazole and triazole moieties in the polymer structure, our PTAODH membrane exhibited an outstanding antibacterial property with two model bacteria. Our results demonstrate the promising application of the symmetric PTAODH membrane for the concentration of textile wastewaters and its superior antifouling performance compared to state-of-the-art commercial FO membranes.

Antibiofouling Performance by Polyethersulfone Membranes Cast with Oxidized Multiwalled Carbon Nanotubes and Arabic Gum

Despite extensive research efforts focusing on tackling membrane biofouling, one of the biggest problems associated with membrane technology, there has been little headway in this area. This study presents novel polyethersulfone (PES) membranes synthesized via a phase inversion method at incremental loadings of functionalized oxidized multiwalled carbon nanotubes (OMWCNT) along with 1 wt. % arabic gum (AG). The synthesized OMWCNT were examined using scanning electron microscopy and transmission electron microscopy for morphological changes compared to the commercially obtained carbon nanotubes. Additionally energy-dispersive X-ray spectroscopy was carried out on the raw and OMWCNT materials, indicating an almost 2-fold increase in oxygen content in the latter sample. The cast PES/OMWCNT membranes were extensively characterized, and underwent a series of performance testing using bovine serum albumin solution for fouling tests and model Gram-positive (Bacillus subtilis) and Gram-negative (Escherichia coli) bacterial species for anti-biofouling experiments. Results indicated that the composite PES membranes, which incorporated the OMWCNT and AG, possessed significantly stronger hydrophilicity and negative surface charge as evidenced by water contact angle and zeta potential data, respectively, when compared to plain PES membranes. Furthermore atomic force microscopy analysis showed that the PES/OMWCNT membranes exhibited significantly lower surface roughness values. Together, these membrane surface features were held responsible for the anti-adhesive nature of the hybrid membranes seen during biofouling tests. Importantly, the prepared membranes were able to inhibit bacterial colonization upon incubation with both Gram-positive and Gram-negative bacterial suspensions. The PES/OMWCNT membranes also presented more resilient normalized flux values when compared to neat PES and commercial membrane samples during filtration of both bacterial suspensions and real treated sewage effluents. Taken together, the results of this study allude to OMWCNT and AG as promising additives, for incorporation into polymeric membranes to enhance biofouling resistance.

Nano-structured magneto-responsive membranes from block copolymers and iron oxide nanoparticles

Preparation of porous membranes from PMAA-b-PMMA copolymers and magnetic iron oxide nanoparticles and their performance under magnetic fields.

Application of Super-Amphiphilic Silica-Nanogel Composites for Fast Removal of Water Pollutants

This work first reports the preparation of super-amphiphilic silica-nanogel composites to reduce the contact angle of water to increase the diffusion of pollutant into adsorbents. In this respect, the silica nanoparticles were encapsulated into nanogels based on ionic and nonionic polyacrylamides by dispersion polymerization technique. The morphologies and the dispersion stability of nanogel composites were investigated to clarify the ability of silica-nanogel composites to adsorb at different interfaces. The feasibility of silica polyacrylamide nanogel composites to act as a high-performance adsorbent for removal of methylene blue (MB) dye and heavy metals (Co2+ and Ni2+) from aqueous solution was investigated. The surface tension, contact angle, average pore size, and zeta potential of the silica-nanogel composites have been evaluated. The MB dye and heavy metal adsorption capacity achieved Qmax = 438-387 mg/g which is considerably high. The adsorption capacity results are explained from the changes in the morphology of the silica surfaces as recorded from scanning electron microscopy (SEM).

Optical Sensing of Microbial Life on Surfaces

The label-free detection of microbial cells attached to a surface is an active field of research. The field is driven by the need to understand and control the growth of biofilms in a number of applications, including basic research in natural environments, industrial facilities, and clinical devices, to name a few. Despite significant progress in the ability to monitor the growth of biofilms and related living cells, the sensitivity and selectivity of such sensors are still a challenge. We believe that among the many different technologies available for monitoring biofilm growth, optical techniques are the most promising, as they afford direct imaging and offer high sensitivity and specificity. Furthermore, as each technique offers different insights into the biofilm growth mechanism, our analysis allows us to provide an overview of the biological processes at play. In addition, we use a set of key parameters to compare state-of-the-art techniques in the field, including a critical assessment of each method, to identify the most promising types of sensors. We highlight the challenges that need to be overcome to improve the characteristics of current biofilm sensor technologies and indicate where further developments are required. In addition, we provide guidelines for selecting a suitable sensor for detecting microbial cells on a surface.

Library of Antifouling Surfaces Derived From Natural Amino Acids by Click Reaction

Biofouling is of great concern in numerous applications ranging from ophthalmological implants to catheters, and from bioseparation to biosensors. In this report, a general and facile strategy to combat surface fouling is developed by grafting of amino acids onto polymer substrates to form zwitterionic structure through amino groups induced epoxy ring opening click reaction. First of all, a library of poly(2-hydroxyethyl methacrylate-co-glycidyl methacrylate) hydrogels with zwitterionic surfaces were prepared, resulting in the formation of pairs of carboxyl anions and protonated secondary amino cations. The analysis of attenuated total reflectance Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy confirmed the successful immobilization of amino acids on the hydrogel surfaces. After that, the contact angle and equilibrium water content of the modified hydrogels showed that the hydrogels exhibited improved hydrophilicity compared with the parent hydrogel. Furthermore, the protein deposition was evaluated by bicinchoninic acid assay using bovine serum albumin (BSA) and lysozyme as models. The results indicated that the performance of the hydrogels was determined by the nature of incorporated amino acid: the hydrogels incorporated with neutral amino acids had nonspecific antiadsorption capability to both BSA and lysozyme; the hydrogels incorporated with charged amino acids showed antiadsorption behaviors against protein with same charge and enhanced adsorption to the protein with opposite charge; the optimal antiadsorption performance was observed on the hydrogels incorporated with polar amino acids with a hydroxyl residual. The improvement of antiprotein fouling of the neutral amino acids grafted hydrogels can be ascribed to the formation of zwitterionic surfaces. Finally, a couple of soft contact lenses grafted with amino acids were fabricated having improved antifouling property and hydrophilicity. The result demonstrated the success of amino acids based zwitterionic antifouling strategy in ophthalmology. This strategy is also applicable to substrates including filtration membranes, microspheres and nanofibers as well. It is a versatile method for amino acids grafting onto polymer substrates to construct zwitterionic surfaces and achieve antifouling properties.

Antimicrobial behavior of biosynthesized silica-silver nanocomposite for water disinfection: a mechanistic perspective

The biosynthesis of nano-silica silver nanocomposite (NSAgNC) and it is as antibacterial effect on gram-negative bacteria viz.Escherichia coli and Pseudomonas aeruginosa has been investigated for disinfection of water. The as-synthesized NSAgNC exhibited antibacterial activity in a dose dependent manner and ∼ 99.9% of E. coli and P. aeruginosa were killed at a concentration of 1.5 mg/mL of NSAgNC (5.1 wt% Ag) within 5h. The NSAgNC showed similar antibacterial activities both in oxic and anoxic conditions. The results further demonstrated that NSAgNC exhibited reactive oxygen species (ROS) independent "particle specific" antibacterial activity through multiple steps in absence of leached out Ag(+) ions. The initial binding of NSAgNC on the cell wall caused loss of cell membrane integrity and leakage of cytoplasmic materials. Inhibition of respiratory chain dehydrogenase by NSAgNC caused metabolic inactivation of the cells and affecting the cell viability. Genomic and proteomic studies further demonstrated the fragmentations of both plasmid and genomic DNA and down regulation of protein expression in NSAgNC treated cells, which leading to the cell death. Thus the biosynthesized NSAgNC has great potential as disinfectant for water purification while minimizing the toxic effects.

Tunable Ag+ ion release from Ag@C for antibacterial and antifouling performances

A method for the controllable release of Ag⁺ ion was proposed by the synthesis of carbon-encapsulated Ag (Ag@C) for antibacterial and antifouling performances.

High-flux, antibacterial ultrafiltration membranes by facile blending with N-halamine grafted halloysite nanotubes

N-Halamine grafted halloysite nanotubes (N-halamine@HNTs) were used as an antibacterial agents to fabricate polyethersulfone (PES) ultrafiltration (UF) hybrid membranes.

Zwitterionic SiO2 nanoparticles as novel additives to improve the antifouling properties of PVDF membranes

Zwitterionic SiO₂ nanoparticles exhibit great potential for improving the antifouling performance of hydrophobic PVDF membranes.

Facile synthesis of water soluble silver ferrite (AgFeO2) nanoparticles and their biological application as antibacterial agents

The syntheses and antibacterial activity of AgFeO₂ and AgFO₂ modified polyethylene glycols are reported.

Antifouling, high-flux nanofiltration membranes enabled by dual functional polydopamine

A facile method for fabricating antifouling and high-flux nanofiltration (NF) membranes was developed based on bioinspired polydopamine (PDA). Polyethersulfone (PES) ultrafiltration membrane as the support was first deposited a thin PDA layer and then chemically modified by a new kind of fluorinated polyamine via Michael addition reaction between fluorinated polyamine and quinone groups of PDA. PDA coating significantly reduced the pore sizes of the PES support membrane and endowed the NF membrane with high separation performance (flux about 46.1 L/(m(2) h) under 0.1 MPa, molecular weight cutoff of about 780 Da). The grafted fluorinated polyamine on the PDA layer could form low free energy microdomains to impede the accumulation/coalescence of foulants and lower the adhesion force between foulants and the membrane, rendering the membrane surface with prominent fouling-release property. When foulant solutions (including bovine serum albumin, oil and humic acid) were filtered, the resultant NF membrane exhibited excellent antifouling properties (the minimal value of total flux decline ratio was ∼8.9%, and the flux recovery ratio reached 98.6%). It is also found that the structural stability of the NF membrane could be significantly enhanced due to the covalent bond and other intermolecular interactions between the PDA layer and the PES support.

Asymmetric organic-inorganic hybrid membrane formation via block copolymer-nanoparticle co-assembly

A facile method for forming asymmetric organic-inorganic hybrid membranes for selective separation applications is developed. This approach combines co-assembly of block copolymer (BCP) and inorganic nanoparticles (NPs) with non-solvent induced phase separation. The method is successfully applied to two distinct molar mass BCPs with different fractions of titanium dioxide (TiO2) NPs. The resulting hybrid membranes exhibit structural asymmetry with a thin nanoporous surface layer on top of a macroporous fingerlike support layer. Key parameters that dictate membrane surface morphology include the fraction of inorganics used and the length of time allowed for surface layer development. The resulting membranes exhibit both good selectivity and high permeability (3200 ± 500 Lm(-2) h(-1) bar(-1)). This fast and straightforward synthesis method for asymmetric hybrid membranes provides a new self-assembly platform upon which multifunctional and high-performance organic-inorganic hybrid membranes can be formed.

Synthesis, spectral and antimicrobial activity of Zn(II) complexes with Schiff bases derived from 2-hydrazino-5-[substituted phenyl]-1,3,4-thiadiazole and benzaldehyde/2-hydroxyacetophenone/indoline-2,3-dione

Zn(II) complexes have been synthesized by reacting zinc acetate with Schiff bases derived from 2-hydrazino-5-[substituted phenyl]-1,3,4-thiadiazole and 2-hydroxyacetophenone/benzaldehyde/indoline-2,3-dione. All these complexes are soluble in DMF and DMSO; low molar conductance values indicate that they are non electrolytes. Elemental analyses suggest that the complexes have 1:2 metal to ligands stoichiometry of the types [ZnL2(H2O)2](L=monoanionic Schiff bases derived from 2-hydrazino-5-[substituted phenyl]-1,3,4-thiadiazole and 2-hydroxyacetophenone/indoline-2,3-dione) [ZnL2(')(OOCCH3)2(H2O)2](L'=neutral Schiff bases derived from 2-hydrazino-5-[substituted phenyl]-1,3,4-thiadiazole and benzaldehyde), and they were characterized by IR, (1)H NMR, and (13)C NMR. Particle sizes of synthesized compounds were measured with dynamic light scattering (DLS) analyser which indicates that particle diameter are of the range ca. 100-200nm. All these Schiff bases and their complexes have also been screened for their antibacterial (Bacillus subtilis (B. subtilis), Escherichia coli (E. coli) and antifungal activities (Colletotrichum falcatum (C. falcatum), Aspergillus niger (A. niger), Fusarium oxysporium (F. oxysporium) Curvularia pallescence (C. pallescence). The antimicrobial activities have shown that upon complexation the activity increases.

Principles of biofouling protection in marine sponges: a model for the design of novel biomimetic and bio-inspired coatings in the marine environment?

The process of biofouling of marine structures and substrates, such as platforms or ship hulls, proceeds in multiple steps. Soon after the formation of an initial conditioning film, formed via the adsorption of organic particles to natural or man-made substrates, a population of different bacterial taxa associates under the formation of a biofilm. These microorganisms communicate through a complex quorum sensing network. Macro-foulers, e.g., barnacles, then settle and form a fouling layer on the marine surfaces, a process that globally has severe impacts both on the economy and on the environment. Since the ban of tributyltin, an efficient replacement of this antifouling compound by next-generation antifouling coatings that are environmentally more acceptable and also showing longer half-lives has not yet been developed. The sponges, as sessile filter-feeder animals, have evolved antifouling strategies to protect themselves against micro- and subsequent macro-biofouling processes. Experimental data are summarized and suggest that coating of the sponge surface with bio-silica contributes to the inhibition of the formation of a conditioning film. A direct adsorption of the surfaces by microorganisms can be impaired through poisoning the organisms with direct-acting secondary metabolites or toxic peptides. In addition, first, compounds from sponges have been identified that interfere with the anti-quorum sensing network. Sponge secondary metabolites acting selectively on diatom colonization have not yet been identified. Finally, it is outlined that direct-acting secondary metabolites inhibiting the growth of macro-fouling animals and those that poison the multidrug resistance pump are available. It is concluded that rational screening programs for inhibitors of the complex and dynamic problem of biofilm production, based on multidisciplinary studies and using sponges as a model, are required in the future.

Potentiation of the cytotoxic activity of copper by polyphosphate on biofilm-producing bacteria: a bioinspired approach

Adhesion and accumulation of organic molecules represent an ecologically and economically massive problem. Adhesion of organic molecules is followed by microorganisms, unicellular organisms and plants together with their secreted soluble and structure-associated byproducts, which damage unprotected surfaces of submerged marine structures, including ship hulls and heat exchangers of power plants. This is termed biofouling. The search for less toxic anti-biofilm strategies has intensified since the ban of efficient and cost-effective anti-fouling paints, enriched with the organotin compound tributyltin, not least because of our finding of the ubiquitous toxic/pro-apoptotic effects displayed by this compound [1]. Our proposed bio-inspired approach for controlling, suppressing and interfluencing the dynamic biofouling complex uses copper as one component in an alternative anti-fouling system. In order to avoid and overcome the potential resistance against copper acquired by microorganisms we are using the biopolymer polyphosphate (polyP) as a further component. Prior to being functionally active, polyP has to be hydrolyzed to ortho-phosphate which in turn can bind to copper and export the toxic compound out of the cell. It is shown here that inhibition of the hydrolysis of polyP by the bisphosphonate DMDP strongly increases the toxic effect of copper towards the biofilm-producing Streptococcus mutans in a synergistic manner. This bisphosphonate not only increases the copper-caused inhibition of cell growth but also of biofilm production by the bacteria. The defensin-related ASABF, a marine toxin produced by the sponge Suberites domuncula, caused only an additive inhibitory effect in combination with copper. We conclude that the new strategy, described here, has a superior anti-biofilm potential and can be considered as a novel principle for developing bio-inspired antifouling compounds, or cocktails of different compounds, in the future.

Cross-linked hybrid nanofiltration membrane with antibiofouling properties and self-assembled layered morphology

A new siloxane monomer, 3-(3-(diethoxy(2-(5-(4-(10-ethoxy-4-hydroxy-2,2-dimethyl-11-oxa-2-ammonio-6-aza-10-silatridecan-10-yl)phenyl)-1,3,4-oxadi azol-2-ylthio)ethyl)silyl)propylamino)-2-hydroxy-N,N,N-trimethylpropan-1-aminium chloride (OA), was synthesized by reported 3-((4-(5-(2-((3-aminopropyl) diethoxysilyl)ethylthio)-1,3,4-oxadiazol-2-yl)phenyl) diethoxysilyl)propan-1-amine (APDSMO) and glycidyltrimethylammonium chloride (GDTMAC) by epoxide ring-opening reaction. OA-poly(vinyl alcohol) (PVA) hybrid antibiofouling nanofilter (NF) membranes were prepared by acid-catalyzed sol-gel followed by formal cross-linking. Membranes showed wormlike arrangement and self-assembled layered morphology with varying OA content. Hybrid NF membrane, especially OA-6, showed low surface roughness, high hydrophilic nature, low biofouling, high cross-linking density, thermal and mechanical stablility, solvent- and chlorine-tolerant nature, along with good permeability and salt rejection. Prepared OA-6 hybrid NF membrane can be used efficiently for desalting and purification of water with about 2.0 g/L salt content (groundwater in major part of India). The described method provides novel route for producing antibiofouling membranes of diversified applications.