Probing Surface Transformations of Lanthanum Nickelate Electrocatalysts during Oxygen Evolution Reaction

Monitoring the spontaneous reconstruction of the surface of metal oxides under electrocatalytic reaction conditions is critical to identifying the active sites and establishing structure-activity relationships. Here, we report on a self-terminated surface reconstruction of Ruddlesden-Popper lanthanum nickel oxide (La2NiO4+δ) that occurs spontaneously during reaction with alkaline electrolyte species. Using a combination of high-resolution scanning transmission electron microscopy (HR-STEM), surface-sensitive X-ray photoelectron spectroscopy (XPS), and soft X-ray absorption spectroscopy (sXAS), as well as electrochemical techniques, we identify the structure of the reconstructed surface layer as an amorphous (oxy)hydroxide phase that features abundant under-coordinated nickel sites. No further amorphization of the crystalline oxide lattice (beyond the ∼2 nm thick layer formed) was observed during oxygen evolution reaction (OER) cycling experiments. Notably, the formation of the reconstructed surface layer increases the material's oxygen evolution reaction (OER) activity by a factor of 45 when compared to that of the pristine crystalline surface. In contrast, a related perovskite phase, i.e., LaNiO3, did not show noticeable surface reconstruction, and also no increase in its OER activity was observed. This work provides detailed insight into a surface reconstruction behavior dictated by the crystal structure of the parent oxide and highlights the importance of surface dynamics under reaction conditions.

Defective blue titanium oxide induces high valence of NiFe-(oxy)hydroxides over heterogeneous interfaces towards high OER catalytic activity

Nickel-iron (oxy)hydroxides (NiFeOxHy) have been validated to speed up sluggish kinetics of the oxygen evolution reaction (OER) but still lack satisfactory substrates to support them. Here, non-stoichiometric blue titanium oxide (B-TiOx) was directly derived from Ti metal by alkaline anodization and used as a substrate for electrodeposition of amorphous NiFeOxHy (NiFe/B-TiOx). The performed X-ray absorption spectroscopy (XAS) and density functional theory (DFT) calculations evidenced that there is a charge transfer between B-TiOx and NiFeOxHy, which gives rise to an elevated valence at the Ni sites (average oxidation state ∼ 2.37). The synthesized NiFe/B-TiOx delivers a current density of 10 mA cm-2 and 100 mA cm-2 at an overpotential of 227 mV and 268 mV, respectively, which are better than that of pure Ti and stainless steel. It also shows outstanding activity and stability under industrial conditions of 6 M KOH. The post-OER characterization studies revealed that the surface morphology and valence states have no significant change after 24 h of operation at 500 mA cm-2, and also can effectively inhibit the leaching of Fe. We illustrate that surface modification of Ti which has high corrosion resistance and mechanical strength, to generate strong interactions with NiFeOxHy is a simple and effective strategy to improve the OER activity and stability of non-precious metal electrodes.

Computational Screening of La2NiO4+δ Cathodes with Ni Site Doping for Solid Oxide Fuel Cells

Doping on the crystal structure is a common strategy to modify electronic conductivity, ion conductivity, and thermal stability. In this work, a series of transition metal elements (Fe, Co, Cu, Ru, Rh, Pd, Os, Ir, and Pt) doped at the Ni site of La₂NiO_4+δ compounds as cathode materials of solid oxide fuel cells (SOFCs) are explored based on first-principles calculations, through which the determinant factors for interstitial oxygen formations and migrations are discussed at an atomistic level. The interstitial oxygen formation and migration energies for doped La₂NiO₄ are largely reduced in contrast to the pristine La₂NiO_4+δ, which is explained by charge density distributions, charge density gradients, and Bader charge differences. In addition, based on a negative correlation between formation energy and migration barrier, the promising cathode materials for SOFCs were screened out between the doped systems. The Fe-doped structures of x = 0.25, Ru-doped structures of x = 0.25 and x = 0.375, Rh-doped structures of x = 0.50, and Pd-doped structures of x = 0.375 and x = 0.50 are screened out with interstitial oxygen formation energy less than -3 eV and migration barrier less than 1.1 eV. In addition, DOS analysis indicates that doping to La₂NiO_4+δ also facilitates the electron conductions. Our work provides a theoretical guideline for the optimization and design of La₂NiO_4+δ-based cathode materials by doping.

Nanoparticle Exsolution from Nanoporous Perovskites for Highly Active and Stable Catalysts

Nanoporosity is clearly beneficial for the performance of heterogeneous catalysts. Although exsolution is a modern method to design innovative catalysts, thus far it is predominantly studied for sintered matrices. A quantitative description of the exsolution of Ni nanoparticles from nanoporous perovskite oxides and their effective application in the biogas dry reforming is here presented. The exsolution process is studied between 500 and 900 °C in nanoporous and sintered La_0.52 Sr_0.28 Ti_0.94 Ni_0.06 O_3±δ . Using temperature-programmed reduction (TPR) and X-ray absorption spectroscopy (XAS), it is shown that the faster and larger oxygen release in the nanoporous material is responsible for twice as high Ni reduction than in the sintered system. For the nanoporous material, the nanoparticle formation mechanism, studied by in situ TEM and small-angle X-ray scattering (SAXS), follows the classical nucleation theory, while on sintered systems also small endogenous nanoparticles form despite the low Ni concentration. Biogas dry reforming tests demonstrate that nanoporous exsolved catalysts are up to 18 times more active than sintered ones with 90% of CO₂ conversion at 800 °C. Time-on-stream tests exhibit superior long-term stability (only 3% activity loss in 8 h) and full regenerability (over three cycles) of the nanoporous exsolved materials in comparison to a commercial Ni/Al₂ O₃ catalyst.

Accelerated water activation and stabilized metal-organic framework via constructing triangular active-regions for ampere-level current density hydrogen production

Two-dimensional metal-organic frameworks (MOFs) have been explored as effective electrocatalysts for hydrogen evolution reaction (HER). However, the sluggish water activation kinetics and structural instability under ultrahigh-current density hinder their large-scale industrial applications. Herein, we develop a universal ligand regulation strategy to build well-aligned Ni-benzenedicarboxylic acid (BDC)-based MOF nanosheet arrays with S introducing (S-NiBDC). Benefiting from the closer p-band center to the Fermi level with strong electron transferability, S-NiBDC array exhibits a low overpotential of 310 mV to attain 1.0 A cm^-2 with high stability in alkaline electrolyte. We speculate the newly-constructed triangular "Ni₂-S₁" motif as the improved HER active region based on detailed mechanism analysis and structural characterization, and the enhanced covalency of Ni-O bonds by S introducing stabilizes S-NiBDC structure. Experimental observations and theoretical calculations elucidate that such Ni sites in "Ni₂-S₁" center distinctly accelerate the water activation kinetics, while the S site readily captures the H atom as the optimal HER active site, boosting the whole HER activity.

Perovskite oxides for oxygen transport: Chemistry and material horizons

Oxygen permeable membrane, which has the advantages of high separation selectivity, low energy consumption and simple process in oxygen separation, can be used in the fields of environment and energy, such as pure oxygen preparation, fuel cell, oxygen-enriched combustion and chemical reactor for methane catalytic conversion (e.g. partial oxidation of methane, carbon dioxide reforming with methane). New materials and technological development are needed to achieve this target for GHG reformation. In this direction, mixed ionic-electronic conducting (MIEC) oxides based on perovskite oxides are one of the prominent materials for oxygen transport at high temperatures. These compounds were created into solid ceramic membranes with considerable electronic and oxygen ionic conductivity. As a result of the differential partial pressure of oxygen across the membrane, this process enables the ionic transfer of oxygen from the air, providing the driving force for oxygen ion transport. Notably, over the last 40 years, the defect theory has been applied to a wide range of MIEC materials, providing insight into electronic and ionic transport, widely applied to designing catalysts for wastewater treatment and gas purification. However, a critical review by in-depth analysis from the material side on perovskite oxides for oxygen transport is needed. This work evaluates the research community's significant and relevant contributions in the perovskite oxides for gas separation domain over the previous four decades in conjunction with theoretical concepts, which would give rise to the fundamental understanding of the impact of various transitional metal elements on oxygen transport performance and stability in a different atmosphere.

Charge storage mechanisms of a π–d conjugated polymer for advanced alkali-ion battery anodes

Charge storage mechanisms of NiBTA, a 1D π–d conjugated polymer derived from benzenetetramine, are studied in Li-, Na- and K-based batteries with a set of advanced experimental and computational methods.

Steering the Methane Dry Reforming Reactivity of Ni/La2O3 Catalysts by Controlled In Situ Decomposition of Doped La2NiO4 Precursor Structures

The influence of A- and/or B-site doping of Ruddlesden-Popper perovskite materials on the crystal structure, stability, and dry reforming of methane (DRM) reactivity of specific A2BO4 phases (A = La, Ba; B = Cu, Ni) has been evaluated by a combination of catalytic experiments, in situ X-ray diffraction, X-ray absorption spectroscopy (XAS), X-ray photoelectron spectroscopy (XPS), and aberration-corrected electron microscopy. At room temperature, B-site doping of La2NiO4 with Cu stabilizes the orthorhombic structure (Fmmm) of the perovskite, while A-site doping with Ba yields a tetragonal space group (I4/mmm). We observed the orthorhombic-to-tetragonal transformation above 170 °C for La2Ni0.9Cu0.1O4 and La2Ni0.8Cu0.2O4, slightly higher than for undoped La2NiO4. Loss of oxygen in interstitial sites of the tetragonal structure causes further structure transformations for all samples before decomposition in the temperature range of 400 °C-600 °C. Controlled in situ decomposition of the parent or A/B-site doped perovskite structures in a DRM mixture (CH4:CO2 = 1:1) in all cases yields an active phase consisting of exsolved nanocrystalline metallic Ni particles in contact with hexagonal La2O3 and a mixture of (oxy)carbonate phases (hexagonal and monoclinic La2O2CO3, BaCO3). Differences in the catalytic activity evolve because of (i) the in situ formation of Ni-Cu alloy phases (in a composition of >7:1 = Ni:Cu) for La2Ni0.9Cu0.1O4, La2Ni0.8Cu0.2O4, and La1.8Ba0.2Ni0.9Cu0.1O4, (ii) the resulting Ni particle size and amount of exsolved Ni, and (iii) the inherently different reactivity of the present (oxy)carbonate species. Based on the onset temperature of catalytic DRM activity, the latter decreases in the order of La2Ni0.9Cu0.1O4 ∼ La2Ni0.8Cu0.2O4 ≥ La1.8Ba0.2Ni0.9Cu0.1O4 > La2NiO4 > La1.8Ba0.2NiO4. Simple A-site doped La1.8Ba0.2NiO4 is essentially DRM inactive. The Ni particle size can be efficiently influenced by introducing Ba into the A site of the respective Ruddlesden-Popper structures, allowing us to control the Ni particle size between 10 nm and 30 nm both for simple B-site and A-site doped structures. Hence, it is possible to steer both the extent of the metal-oxide-(oxy)carbonate interface and its chemical composition and reactivity. Counteracting the limitation of the larger Ni particle size, the activity can, however, be improved by additional Cu-doping on the B-site, enhancing the carbon reactivity. Exemplified for the La2NiO4 based systems, we show how the delicate antagonistic balance of doping with Cu (rendering the La2NiO4 structure less stable and suppressing coking by efficiently removing surface carbon) and Ba (rendering the La2NiO4 structure more stable and forming unreactive surface or interfacial carbonates) can be used to tailor prospective DRM-active catalysts.

Dynamic evolution and reversibility of single-atom Ni(II) active site in 1T-MoS2 electrocatalysts for hydrogen evolution

1T-MoS₂ and single-atom modified analogues represent a highly promising class of low-cost catalysts for hydrogen evolution reaction (HER). However, the role of single atoms, either as active species or promoters, remains vague despite its essentiality toward more efficient HER. In this work, we report the unambiguous identification of Ni single atom as key active sites in the basal plane of 1T-MoS₂ (Ni@1T-MoS₂) that result in efficient HER performance. The intermediate structure of this Ni active site under catalytic conditions was captured by in situ X-ray absorption spectroscopy, where a reversible metallic Ni species (Ni⁰) is observed in alkaline conditions whereas Ni remains in its local structure under acidic conditions. These insights provide crucial mechanistic understanding of Ni@1T-MoS₂ HER electrocatalysts and suggest that the understanding gained from such in situ studies is necessary toward the development of highly efficient single-atom decorated 1T-MoS₂ electrocatalysts.

Ultrafine Metallic Nickel Domains and Reduced Molybdenum States Improve Oxygen Evolution Reaction of NiFeMo Electrocatalysts

An electrocatalyst for oxygen evolution reaction (OER) is essential in the realization of renewable energy conversion technologies, but its large overpotential, slow charge transfer, and degradation of surface reaction sites are yet to be overcome. Here, it is found that the metallic nickel domains and high-valence reduced molybdenum ions of NiFeMo electrocatalysts grown on a 3D conductive and porous electrode without using binders enable ultrahigh performance in OER. High resolution-transmission electron microscope and extended X-ray absorption fine structure analyses show that metallic nickel domains with Ni-Ni bonds are generated on the catalyst surface via a dry synthesis using nitrogen plasma. Also, Mo K-edge X-ray absorption near-edge spectroscopy reveals that Mo⁶⁺ ions are reduced into high-valence modulating Mo⁴⁺ ions. With the metallic nickel domains facilitating the adsorption of oxygen intermediates to low-coordinated Ni⁰ and the Mo⁴⁺ pulling their electrons, the catalyst exhibits about 60-fold higher activity than a Mo-free NiFe catalyst, while giving about threefold faster charge transfer along with longer stability over 100 h and repeated 100 cycles compared to a bare NiFeMo catalyst. Additionally, these metallic domains and high-valence modulating metal ions are exhibited to give high Faradaic efficiency over 95%.

Operando Soft X-ray Absorption Spectroscopic Study on a Solid Oxide Fuel Cell Cathode during Electrochemical Oxygen Reduction

An operando soft X-ray absorption spectroscopic technique, which enabled the analysis of the electronic structures of the electrode materials at elevated temperature in a controlled atmosphere and electrochemical polarization, was established and its availability was demonstrated by investigating the electronic structural changes of an La₂ NiO_4+δ dense-film electrode during an electrochemical oxygen reduction reaction. Clear O K-edge and Ni L-edge X-ray absorption spectra could be obtained below 773 K under an atmospheric pressure of 100 ppm O₂ /He, 0.1 % O₂ /He, and 1 % O₂ /He gas mixtures. Considerable spectral changes were observed in the O K-edge X-ray absorption spectra upon changing the PO2 and application of electrical potential, whereas only small spectral changes were observed in Ni L-edge X-ray absorption spectra. A pre-edge peak of the O K-edge X-ray absorption spectra, which reflects the unoccupied partial density of states of Ni 3d-O 2p hybridization, increased or decreased with cathodic or anodic polarization, respectively. The electronic structural changes of the outermost orbital of the electrode material due to electrochemical polarization were successfully confirmed by the operando X-ray absorption spectroscopic technique developed in this study.

Hybrid Energy Storage of Ni(OH)2-coated N-doped Graphene Aerogel//N-doped Graphene Aerogel for the Replacement of NiCd and NiMH Batteries

Although Nickel–Cadmium (NiCd) and Nickel–metal hydride (NiMH) batteries have been widely used, their drawbacks including toxic Cd and expensive La alloy at the negative electrodes, low energy density (40–60 Wh/kg for NiCd and 140–300 Wh/L for NiMH), low power density (150 W/kg for NiCd and 1000 W/kg for NiMH), and low working potential (1.2 V) limit their applications. In this work, Cd and La alloy were replaced with N-doped reduced graphene oxide aerogel (N-rGO_ae) providing a hybrid energy storage (HES) having the battery and supercapacitor effects. The HES of Ni(OH)₂-coated N-rGO_ae//N-rGO_ae provides 1.5 V, a specific energy of 146 Wh/kg, a maximum specific power of 7705 W/kg, and high capacity retention over 84.6% after 5000 cycles. The mass change at the positive electrode during charging/discharging is 8.5 µg cm⁻² owing to the insertion/desertion of solvated OH⁻ into the α-Ni(OH)₂-coated N-rGO_ae. At the negative electrode, the mass change of the solvated K⁺, physically adsorbed/desorbed to the N-rGO_ae, is 7.5 μg cm⁻². In situ X-ray absorption spectroscopy (XAS) shows highly reversible redox reaction of α-Ni(OH)₂. The as-fabricated device without using toxic Cd and expensive La alloy has a potential as a candidate of NiCd and NiMH.

Laboratory von Hámos X-ray spectroscopy for routine sample characterization

High energy resolution, hard X-ray spectroscopies are powerful element selective probes of the electronic and local structure of matter, with diverse applications in chemistry, physics, biology, and materials science. The routine application of these techniques is hindered by the complicated and slow access to synchrotron radiation facilities. Here we propose a new, economic, easily operated laboratory high resolution von Hámos type X-ray spectrometer, which offers rapid transmission experiments for X-ray absorption and is also capable of recording X-ray emission spectra. The use of a cylindrical analyzer crystal and a position sensitive detector enabled us to build a robust, flexible setup with low operational costs, while delivering synchrotron grade signal to noise measurements in reasonable acquisition times. We demonstrate the proof of principle and give examples for both measurement types. Finally, tracking of a several day long chemical transformation, a case better suited for laboratory than synchrotron investigation, is also presented.

Synthesis of shape-controlled La2NiO4+δ nanostructures and their anisotropic properties for oxygen diffusion

Control over the shape of La₂NiO_4+δ nanostructures using a reverse microemulsion method and the effect on their oxygen diffusion properties.

EXAFS and XANES investigation of (Li, Ni) codoped ZnO thin films grown by pulsed laser deposition

Ni doped, Li doped and (Li, Ni) codoped ZnO thin films were successfully grown using a pulsed laser deposition technique. Undoped and doped ZnO thin films were investigated using extended x-ray absorption fine structure (EXAFS) and x-ray absorption near edge spectroscopy (XANES). Preliminary investigations on the Zn K-edge of the undoped and doped ZnO thin films revealed that doping has not influenced the average Zn-Zn bond length and Debye-Waller factor. This shows that both Ni and Li doping do not appreciably affect the average local environment of Zn. All the doped ZnO thin films exhibited more than 50% of substitutional Ni, with a maximum of 77% for 2% Ni and 2% Li doped ZnO thin film. The contribution of Ni metal to the EXAFS signal clearly reveals the presence of Ni clusters. The Ni-Ni distance in the Ni(0) nanoclusters, which are formed in the film, is shorter with respect to the reference Ni metal foil and the Debye-Waller factor is higher. Both facts perfectly reflect what is expected for metal nanoparticles. At the highest doping concentration (5%), the presence of Li favors the growth of a secondary NiO phase. Indeed, 2% Ni and 5% Li doped ZnO thin film shows %Nisub = 75 ± 11, %Nimet = 10 ± 8, %NiO = 15 ± 8. XANES studies further confirm that the substitutional Ni is more than 50% in all the samples. These results explain the observed magnetic properties.

Correlating metal poisoning with zeolite deactivation in an individual catalyst particle by chemical and phase-sensitive X-ray microscopy

Fluid catalytic cracking (FCC) is the main conversion process used in oil refineries. An X-ray microscopy method is used to show that metal poisoning and related structural changes in the zeolite active material lead to a non-uniform core–shell deactivation of FCC catalyst particles. The study links the detrimental effect of V and Ni poisoning with zeolite destruction and dealumination in a spatial manner within a single FCC catalyst particle.