Effect of increasing mineralization on pre-osteoblast response to native collagen fibril scaffolds for bone tissue repair and regeneration

With limited availability of auto- and allografts, there is increasing demand for alternative bone repair and regeneration materials. Inspired by a mimetic approach, the utility of producing engineered native protein scaffolds is being increasingly realized, demonstrating the need for continued research in this field. In previous work, we detailed a process for producing mineralized collagen scaffolds using tendon to create collagen templates of highly aligned, natively crosslinked collagen fibrils. The process produced mineral phase closely matching that of native bone, and integration of mineral with the collagen template was demonstrated to be easily controlled, allowing scaffolds to be mechanically tuned. In the current study, we have extended this work to investigate how variation in the mineralization level of these scaffolds affects the osteogenic response of pre-osteoblastic cells. Scaffolds were produced under three treatment groups, where collagen templates underwent 0, 5, or 20 mineralization cycles. Scaffolds in each treatment group were cultured with MC3T3-E1 cells for 1, 7, or 14 days. Morphologic assessment under SEM indicated decreased attachment to the mineralized scaffolds, supported by DNA results showing a significant drop between culture days 1 and 7 for mineralized scaffolds only. For adherent cells, increasing scaffold mineralization also delayed cell spreading. While mineralization presented a barrier to cell coverage of scaffolds, it increased osteogenic activity, with cells on the mineralized scaffolds showing significantly greater alkaline phosphatase activity and osteocalcin production. Understanding how increasing collagen mineralization effects pre-osteoblast function may enable design of more advanced mineralized collagen scaffolds for bone repair and regeneration.

Selective Laser Melting and Electron Beam Melting of Ti6Al4V for Orthopedic Applications: A Comparative Study on the Applied Building Direction

The 3D printing process offers several advantages to the medical industry by producing complex and bespoke devices that accurately reproduce customized patient geometries. Despite the recent developments that strongly enhanced the dominance of additive manufacturing (AM) techniques over conventional methods, processes need to be continually optimized and controlled to obtain implants that can fulfill all the requirements of the surgical procedure and the anatomical district of interest. The best outcomes of an implant derive from optimal compromise and balance between a good interaction with the surrounding tissue through cell attachment and reduced inflammatory response mainly caused by a weak interface with the native tissue or bacteria colonization of the implant surface. For these reasons, the chemical, morphological, and mechanical properties of a device need to be designed in order to assure the best performances considering the in vivo environment components. In particular, complex 3D geometries can be produced with high dimensional accuracy but inadequate surface properties due to the layer manufacturing process that always entails the use of post-processing techniques to improve the surface quality, increasing the lead times of the whole process despite the reduction of the supply chain. The goal of this work was to provide a comparison between Ti6Al4V samples fabricated by selective laser melting (SLM) and electron beam melting (EBM) with different building directions in relation to the building plate. The results highlighted the influence of the process technique on osteoblast attachment and mineralization compared with the building orientation that showed a limited effect in promoting a proper osseointegration over a long-term period.

Electrochemical methods for fabrication of polymers/calcium phosphates nanocomposites as hard tissue implants

Developing and manipulating new biomaterials is an ongoing topic for their needs in medical uses. The evolution and development of new biomaterials, in both the academic and industrial sectors, have been encouraged due to the dramatic improvement in medicine and medical-related technologies. Due to the drawbacks associated with natural biomaterials, the use of synthetic biomaterials is preferential due to basic and applied aspects. Various techniques are involved in fabricating biomaterials. Among them are the electrochemical-based methods, which include electrodeposition and electrophoretic methods. Although electrospinning and electrospraying are not typical electrochemical methods, they are also reviewed in this article due to their importance. Many remarkable features can be acquired from this technique. Electrodeposition and electrophoretic deposition are exceptional and valuable processes for fabricating thin or thick coated films on a surface of metallic implants. Electrodeposition and electrophoretic deposition have some common positive features. They can be used at low temperatures, do not affect the structure of the implant, and can be applied to complex shapes, and they can produce superior properties, such as quick and uniform coating. Furthermore, they can possibly control the thickness and chemical composition of the coatings. Electrospinning is a potentially emerging and efficient process for producing materials with nanofibrous structures, which have exceptional characteristics such as mechanical properties, pore size, and superior surface area. These specialized characteristics induce these nanostructured materials to be used in different technologies.

Nano-silver hydroxyapatite based antibacterial 3D scaffolds of gelatin/alginate/poly (vinyl alcohol) for bone tissue engineering applications

In the present study macroporous three dimensional spongy scaffolds composed of gelatin, alginate, and poly (vinyl alcohol) were prepared by cryogelation technique and silver hydroxyapatite was reinforced into the 3 D matrix. The polymer nanocomposite materials were characterized by analytical techniques such as Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), and x-ray diffraction (XRD) analysis. The nanocomposite scaffolds were studied for their porous nature, water sorption capacity, and mechanical behavior. The suitability of scaffolds for bone tissue engineering applications was judged by evaluating their antibacterial and cytotoxic nature against gram positive and gram negative bacteria, and MC3T3-E1 preosteoblast cells, respectively. The scaffolds were also studied for release of silver ions and the influence of various experimental conditions on the release profiles of silver ions was investigated.

Naturally derived proteins and glycosaminoglycan scaffolds for tissue engineering applications

Tissue engineering (TE) aims to mimic the complex environment where organogenesis takes place using advanced materials to recapitulate the tissue niche. Cells, three-dimensional scaffolds and signaling factors are the three main and essential components of TE. Over the years, materials and processes have become more and more sophisticated, allowing researchers to precisely tailor the final chemical, mechanical, structural and biological features of the designed scaffolds. In this review, we will pose the attention on two specific classes of naturally derived polymers: fibrous proteins and glycosaminoglycans (GAGs). These materials hold great promise for advances in the field of regenerative medicine as i) they generally undergo a fast remodeling in vivo favoring neovascularization and functional cells organization and ii) they elicit a negligible immune reaction preventing severe inflammatory response, both representing critical requirements for a successful integration of engineered scaffolds with the host tissue. We will discuss the recent achievements attained in the field of regenerative medicine by using proteins and GAGs, their merits and disadvantages and the ongoing challenges to move the current concepts to practical clinical application.

Electrophoretic Deposition of Dexamethasone-Loaded Mesoporous Silica Nanoparticles onto Poly(L-Lactic Acid)/Poly(ε-Caprolactone) Composite Scaffold for Bone Tissue Engineering

The incorporation of microcarriers as drug delivery vehicles into polymeric scaffold for bone regeneration has aroused increasing interest. In this study, the aminated mesoporous silica nanoparticles (MSNs-NH2) were prepared and used as microcarriers for dexamethasone (DEX) loading. Poly(l-lactic acid)/poly(ε-caprolactone) (PLLA/PCL) nanofibrous scaffold was fabricated via thermally induced phase separation (TIPS) and served as template, onto which the drug-loaded MSNs-NH2 nanoparticles were deposited by electrophoretic deposition (EPD). The physicochemical and release properties of the prepared scaffolds (DEX@MSNs-NH2/PLLA/PCL) were examined, and their osteogenic activities were also evaluated through in vitro and in vivo studies. The release of DEX from the scaffolds revealed an initial rapid release followed by a slower and sustained one. The in vitro results indicated that the DEX@MSNs-NH2/PLLA/PCL scaffold exhibited good biocompatibility to rat bone marrow-derived mesenchymal stem cells (BMSCs). Also, BMSCs cultured on the DEX@MSNs-NH2/PLLA/PCL scaffold exhibited a higher degree of osteogenic differentiation than those cultured on PLLA/PCL and MSNs-NH2/PLLA/PCL scaffolds, in terms of alkaline phosphatase (ALP) activity, mineralized matrix formation, and osteocalcin (OCN) expression. Furthermore, the in vivo results in a calvarial defect model of Sprague-Dawley (SD) rats demonstrated that the DEX@MSNs-NH2/PLLA/PCL scaffold could significantly promote calvarial defect healing compared with the PLLA/PCL scaffold. Thus, the EPD technique provides a convenient way to incorporate osteogenic agents-containing microcarriers to polymer scaffold, and thus, prepared composite scaffold could be a potential candidate for bone tissue engineering application due to its capacity for delivery of osteogenic agents.

Investigation of synergistic effects of inductive and conductive factors in gelatin-based cryogels for bone tissue engineering

Macroporous and biocompatible scaffolds for bone tissue engineering were prepared from 4% gelatin (G) and 4% gelatin/2% nanohydroxyapatite (nHAP), (GN), by cryogelation. The cryogels have interconnected pores with pore size around 100 μm and a high degree of cross-linking. The incorporation of nHAP slightly reduced the porosity, degree of crosslinking, swelling kinetics and equilibrium water uptake, but enhanced the toughness of the cryogel scaffolds. The osteo-regeneration potential of GN cryogels was further enhanced by binding with bone morphogenetic protein (BMP-2) to produce the gelatin/nHAP/BMP-2 (GNB) scaffold. The efficacy of BMP-2 incorporation was tested through in vitro release studies and a sustained release profile could be observed from the cumulative BMP-2 release curve. To elucidate the effect of cryogel composition on cell proliferation and differentiation, rabbit adipose-derived stem cells (ADSCs) were seeded in cryogel scaffolds. In vitro studies demonstrated a reduced proliferation rate and enhanced osteogenic differentiation of ADSCs in GNB cryogel scaffolds from the combined effect of nHAP and BMP-2, judging from the elevated alkaline phosphatase activity and the degree of mineralization. Confocal microscopy confirmed high viability and good cytoskeletal spreading of ADSCs on cryogels while osteocalcin (OCN) protein quantification affirmed the dominance of GNB in the osteogenic differentiation of ADSCs compared to G and GN cryogels. The maximum osteogenesis capability of GNB was also confirmed through the up-regulation of specific bone maker genes of early marker protein collagen I (COL I) and late marker protein osteopontin (OPN). From an in vivo animal model, computed tomography analysis confirmed the superior bone regeneration capability of ADSCs in GNB cryogels by implanting ADSCs/GNB cryogel constructs in rabbit calvarial critical size defects. Histological and immunohistochemical analysis demonstrated new bone formation and continued expression of COL I and OCN bone-specific proteins at the defect site. Taken together, the results demonstrate that G cryogels modified with osteo-conductive nHAP and osteo-inductive BMP-2 could provide cues to synergistically promote the osteogenesis of ADSCs in vitro and in vivo.

Room-temperature fabrication of a three-dimensional reduced-graphene oxide/polypyrrole/hydroxyapatite composite scaffold for bone tissue engineering

The development of tissue engineering (TE) provides a promising alternative strategy for bone healing and regeneration.

Microwave-Assisted Hydrothermal Rapid Synthesis of Calcium Phosphates: Structural Control and Application in Protein Adsorption

Synthetic calcium phosphate (CaP)-based materials have attracted much attention in the biomedical field. In this study, we have investigated the effect of pH values on CaP nanostructures prepared using a microwave-assisted hydrothermal method. The hierarchical nanosheet-assembled hydroxyapatite (HAP) nanostructure was prepared under weak acidic conditions (pH 5), while the HAP nanorod was prepared under neutral (pH 7) and weak alkali (pH 9) condition. However, when the pH value increases to 11, a mixed product of HAP nanorod and tri-calcium phosphate nanoparticle was obtained. The results indicated that the pH value of the initial reaction solution played an important role in the phase and structure of the CaP. Furthermore, the protein adsorption and release performance of the as-prepared CaP nanostructures were investigated by using hemoglobin (Hb) as a model protein. The sample that was prepared at pH = 11 and consisted of mixed morphologies of nanorods and nanoprisms showed a higher Hb protein adsorption capacity than the sample prepared at pH 5, which could be explained by its smaller size and dispersed structure. The results revealed the relatively high protein adsorption capacity of the as-prepared CaP nanostructures, which show promise for applications in various biomedical fields such as drug delivery and protein adsorption.

BMP-2 Derived Peptide and Dexamethasone Incorporated Mesoporous Silica Nanoparticles for Enhanced Osteogenic Differentiation of Bone Mesenchymal Stem Cells

Bone morphogenetic protein-2 (BMP-2), a growth factor that induces osteoblast differentiation and promotes bone regeneration, has been extensively investigated in bone tissue engineering. The peptides of bioactive domains, corresponding to residues 73-92 of BMP-2 become an alternative to reduce adverse side effects caused by the use of high doses of BMP-2 protein. In this study, BMP-2 peptide functionalized mesoporous silica nanoparticles (MSNs-pep) were synthesized by covalently grafting BMP-2 peptide on the surface of nanoparticles via an aminosilane linker, and dexamethasone (DEX) was then loaded into the channel of MSNs to construct nanoparticulate osteogenic delivery systems (DEX@MSNs-pep). The in vitro cell viability of MSNs-pep was tested with bone mesenchymal stem cells (BMSCs) exposure to different particle concentrations, revealing that the functionalized MSNs had better cytocompatibility than their bare counterparts, and the cellular uptake efficiency of MSNs-pep was remarkably larger than that of bare MSNs. The in vitro results also show that the MSNs-pep promoted osteogenic differentiation of BMSCs in terms of the levels of alkaline phosphatase (ALP) activity, calcium deposition, and expression of bone-related protein. Moreover, the osteogenic differentiation of BMSCs can be further enhanced by incorporating of DEX into MSNs-pep. After intramuscular implantation in rats for 3 weeks, the computed tomography (CT) images and histological examination indicate that this nanoparticulate osteogenic delivery system induces effective osteoblast differentiation and bone regeneration in vivo. Collectively, the BMP-2 peptide and DEX incorporated MSNs can act synergistically to enhance osteogenic differentiation of BMSCs, which have potential applications in bone tissue engineering.

Effect of rat bone marrow derived–stem cell delivery from serum-loaded oxidized alginate–gelatin–biphasic calcium phosphate hydrogel for bone tissue regeneration using a nude mouse critical-sized calvarial defect model

Blood serum contains various kinds of proteins which are necessary for tissue repair and regeneration process. Defect healing of fractured bone is initiated by the influx of blood and then clot formation. Thus, proteins in serum may have the ability to stimulate the bone regeneration process. In this work, we investigated the fabrication of serum-loaded oxidized alginate–gelatin–biphasic calcium phosphate hydrogels with various contents of blood serum (0%, 5%, 10%, and 15% in % v/v) to evaluate the stimulatory effect of serum proteins on bone regeneration. This system was also evaluated for rat bone marrow–derived stem cell delivery to get faster bone healing. The serum-loaded oxidized alginate–gelatin–biphasic calcium phosphate hydrogel samples were characterized by scanning electron microscopy, porosity meter, X-ray diffraction, and Fourier transform infrared for morphology and phase characterization together with their mechanical behavior. Protein release behavior, degradation, and swelling of the samples were studied. In vitro study was performed using bone marrow–derived stem cells to study cell attachment, viability, and proliferation. These studies revealed the best cell attachment and highest proliferation for 5% serum-loaded oxidized alginate–gelatin–biphasic calcium phosphate hydrogel scaffold. This composition also showed the ability to deliver stem cell in the defect zone which significantly improved the bone regeneration extent found in the in vivo animal model. In vivo study revealed that for the critical 5-mm calvarial defect into nude mouse skull, the 5% serum-loaded sample with bone marrow–derived stem cells shows the best bone regeneration potential.

Hierarchical polymeric scaffolds support the growth of MC3T3-E1 cells

Tissue engineering makes use of the principles of biology and engineering to sustain 3D cell growth and promote tissue repair and/or regeneration. In this study, macro/microporous scaffold architectures have been developed using a hybrid solid freeform fabrication/thermally induced phase separation (TIPS) technique. Poly(lactic-co-glycolic acid) (PLGA) dissolved in 1,4-dioxane was used to generate a microporous matrix by the TIPS method. The 3D-bioplotting technique was used to fabricate 3D macroporous constructs made of polyethylene glycol (PEG). Embedding the PEG constructs inside the PLGA solution prior to the TIPS process and subsequent extraction of PEG following solvent removal (1,4-dioaxane) resulted in a macro/microporous structure. These hierarchical scaffolds with a bimodal pore size distribution (<50 and >300 μm) contained orthogonally interconnected macro-channels generated by the extracted PEG. The diameter of the macro-channels was varied by tuning the dispensing parameters of the 3D bioplotter. The in vitro cell culture using murine MC3T3-E1 cell line for 21 days demonstrated that these scaffolds could provide a favorable environment to support cell adhesion and growth.

Fabrication of cationized gelatin nanofibers by electrospinning for tissue regeneration

A green fabrication approach has been developed to produce biocompatible and non-cytotoxic cationically modified gelatin nanofibers with enhanced biological performance.

Engineering of biomimetic nanofibrous matrices for drug delivery and tissue engineering

Biomimetic nanofibers have emerged as promising candidates for drug delivery and tissue engineering applications. In this paper, recent advances on the fabrication and application of biomimetic nanofibers as drug carriers and scaffolding materials are reviewed. First, we delineate the three popular nanofiber fabrication techniques including electrospinning, phase separation and molecular self-assembly, covering the principal materials used for different techniques and surface functionalization strategies for nanofibers. Furthermore, we focus our interest on the nanofiber-based delivery strategies and underlying kinetics for growth factors and other bioactive molecules, following which we summarize the recent advances in the development of these nanofibrous matrices for bone, vascular and neural tissue engineering applications. Finally, research challenges and future trends in the related areas are discussed.

Bioactive nanoparticle-gelatin composite scaffold with mechanical performance comparable to cancellous bones

Mechanical properties are among the most concerned issues for artificial bone grafting materials. The scaffolds used for bone grafts are either too brittle (glass) or too weak (polymer), and therefore composite scaffolds are naturally expected as the solution. However, despite the intensive studies on composite bone grafting materials, there still lacks a material that could be matched to the natural cancellous bones. In this study, nanosized bioactive particles (BP) with controllable size and good colloidal stability were used to composite with gelatin, forming macroporous scaffolds. It was found that the mechanical properties of obtained composite scaffolds, in terms of elastic modulus, compressive strength, and strain at failure, could match to that of natural cancellous bones. This is ascribed to the good distribution of particle in matrix and strong interaction between particle and gelatin. Furthermore, the incorporation of BPs endues the composite scaffolds with bioactivity, forming HA upon reacting with simulated body fluid (SBF) within days, thus stimulating preosteoblasts attachment, growth, and proliferation in these scaffolds. Together with their good mechanical properties, these composite scaffolds are promising artificial bone grating materials.

Synthesis of an RGD-grafted oxidized sodium alginate-N-succinyl chitosan hydrogel and an in vitro study of endothelial and osteogenic differentiation

Hydrophilic surfaces for hydrogels as bone tissue engineering scaffolds are not beneficial for the adsorption of protein and not conducive to the adhesion and growth of cells. In this study, we proposed to use an oxidized sodium alginate-N-succinyl chitosan hydrogel as a bone tissue engineering scaffold material and to overcome this issue by using RGD to modify this kind of hydrogel. The physicochemical properties of the obtained hydrogels were characterized and an in vitro endothelial differentiation and osteogenic differentiation study of bone-marrow-derived mesenchymal stem cells (BMSCs) was conducted to evaluate it. The results showed that the RGD-grafted oxidized sodium alginate-N-succinyl chitosan hydrogel not only had a good degradability but also enhanced cell adhesion and proliferation and promoted endothelial differentiation and osteogenic differentiation of BMSCs. Based on the results, it can be expected that RGD-grafted oxidized sodium alginate-N-succinyl chitosan hydrogel might be an optimal material for bone tissue engineering scaffold whenever it is used alone, or composed with other materials in the future.