Selective Synthesis of N-[1,3,5]Triazinyl-α-Ketoamides and N-[1,3,5]Triazinyl-Amides from the Reactions of 2-Amine-[1,3,5]Triazines with Ketones

In this study, we report a selective approach for synthesizing N-([1,3,5]triazine-2-yl) α-ketoamides and N-([1,3,5]triazine-2-yl) amides from ketones with 2-amino[1,3,5]triazines through oxidation and oxidative C-C bond cleavage reaction, respectively. The transformation proceeds under mild conditions, provides good functional group tolerance and chemoselectivity, and will serve as a valuable tool for the synthesis of bioactive products.

One-Pot Synthesis of α-Ketoamides from α-Keto Acids and Amines Using Ynamides as Coupling Reagents

A one-pot strategy for α-keto amide bond formation have been developed by using ynamides as coupling reagents under extremely mild reaction conditions. Diversely structural α-ketoamides were afforded in up to 98% yield for 36 examples. This reaction features advantages such as practical coupling procedure, wide functional group tolerance, and extremely mild conditions and has potential applications in synthetic and medicinal chemistry.

Mg(OtBu)2-catalyzed C–H oxidation of α-azido arylethanones using TBHP as the oxidant and carbonyl oxygen source: facile access to primary α-ketoamides

A Mg(OtBu)2-catalyzed C(sp3)–H oxidation of α-azido arylethanones to straightforwardly produce primary α-ketoamides is presented.

An Electrochemical Route for Special Oxidative Ring-Opening of Indoles

A novel electrochemical protocol for the oxidative cleavage of indoles has been developed, which offers a simple way to access synthetically useful anthranilic acid derivatives. In undivided cells, a wide variety of indoles and alcohol compounds are examined to afford amide ester aromatics without using extra oxidants and stoichiometric metal catalysts, which avoids the formation of undesired by-products and exhibits high atom economy. The products we described in this perspective represent a synthetic intermediate in numerous drug molecules and industrial chemical reagents and remarkably show potential application in the future.

Cobalt-Catalyzed Aerobic Oxidative Cleavage of Alkyl Aldehydes: Synthesis of Ketones, Esters, Amides, and α-Ketoamides

A widely applicable approach was developed to synthesize ketones, esters, amides via the oxidative C-C bond cleavage of readily available alkyl aldehydes. Green and abundant molecular oxygen (O₂ ) was used as the oxidant, and base metals (cobalt and copper) were used as the catalysts. This strategy can be extended to the one-pot synthesis of ketones from primary alcohols and α-ketoamides from aldehydes.

CuO-decorated magnetite-reduced graphene oxide: a robust and promising heterogeneous catalyst for the oxidative amidation of methylarenes in water via benzylic sp3 C–H activation

CuO-decorated magnetite-reduced graphene oxide: a heterogeneous catalyst for the oxidative amidation of methylarenes in water at room temperature.

Metal-free electrochemical synthesis of α-ketoamides via decarboxylative coupling of α-keto acids with isocyanides and water

A mild and convenient electrochemical protocol has been developed for the preparation of α-ketoamides via a decarboxylative coupling reaction of α-keto acids with isocyanides and water.

Synthesis of aliphatic α-ketoamides from α-substituted methyl ketones via a Cu-catalyzed aerobic oxidative amidation

α-Ketoamides are an important key functional group and have been used as versatile and valuable intermediates and synthons in a variety of functional group transformations. Synthetic methods for making aryl α-ketoamides as drug candidates have been greatly improved through metal-catalyzed aerobic oxidative amidations. However, the preparation of alkyl α-ketoamides through metal-catalyzed aerobic oxidative amidations has not been reported because generating α-ketoamides from aliphatic ketones with two α-carbons theoretically provides two distinct α-ketoamides. Our strategy is to activate the α-carbon by introducing an N-substituent at one of the two α-positions. The key to this strategy is how heterocyclic compounds such as triazoles and imidazoles affect the selectivity of the synthesis of the alkyl α-ketoamides. From this basic concept, and by optimizing the reaction and elucidating the mechanism of the synthesis of aryl α-ketoamides via a copper-catalyzed aerobic oxidative amidation, we prepared fourteen aliphatic α-ketoamides in high yields (48-84%).

Rapid assembly of α-ketoamides through a decarboxylative strategy of isocyanates with α-oxocarboxylic acids under mild conditions

A simple and practical method for α-ketoamide synthesis via a decarboxylative strategy of isocyanates with α-oxocarboxylic acids is described. The reaction proceeds at room temperature under mild conditions without an oxidant or an additive, showing good substrate scope and functional compatibility. Moreover, the applicability of this method was further demonstrated by the synthesis of various bioactive molecules and different application examples through a two-step one-pot operation.

Unveiling the reaction process of the amine in direct amidation of aromatic ketones in H2O

In the classical amidation between aromatic ketones and amines, 2.0 equivalents of amines are necessarily required to gain satisfying yields. The specific role of the amine in the direct amidation already puzzled us for a long time. In this work, we disclosed that the amine acts as both reactant and catalyst. Specifically, the determination of reaction intermediates revealed the full mechanism, based on which, the introduction of one equivalent base in the amidation is showcased here that a high yield (∼95 %) can be afforded using only 1.1 equiv. of amine.

Amine-Mediated Bond Cleavage in Oxidized Lignin Models

Introducing amines/ammonia into lignin cracking will allow novel bond cleavage pathways. Herein, a method of amines/ammonia-mediated bond cleavage in oxidized lignin β-O-4 models was studied using a copper catalyst at room temperature, demonstrating the effect of the amine source on the selectivity of products. For primary and secondary aliphatic amines, lignin ketone models underwent oxidative C_α -C_β bond cleavage and C_α -N bond formation to generate aromatic amides. For ammonia, the competition between oxygen and ammonia determined the selectivity between C_α -N and C_β -N bond formation, generating amides and α-keto amides, respectively. For tertiary amines, the lignin models underwent oxidative C_α -C_β bond cleavage to benzoic acids. Control experiments indicated that amines act as nucleophiles attacking at the C_α or C_β position of the oxidized β-O-4 linkage to be cleaved. This study represents a novel example that the breakage of oxidized lignin model can be regulated by amines with a copper catalyst.

Copper-Catalyzed Oxidative Synthesis of α-Ketoamides from Aryl Methyl Ketones and N-Bromobutanimide Using N,N-Dimethylformamide as Dimethylamine Source

A novel and practical Cu(OAc)2-catalyzed oxidative synthesis of α-ketoamides from aryl methyl ketones and N-bromobutanimide (NBS) using N,N-dimethylformamide (DMF) as dimethylamine (HNMe2) source and solvent has been developed under mild conditions. DMF was used as a HNMe2 source and can be easily converted into HNMe2 by acid hydrolysis. The mechanistic studies indicate that Cu(OAc)2 plays a dual role in providing both catalyst and oxidant.

Selective aerobic oxidation of cyclic ethers to lactones over Au/CeO2 without any additives

Selective oxidation of ethers to lactones with O₂ as a benign oxidant using Au/CeO₂ as the catalyst has been developed. The oxygen vacancies and Au⁰ species on the surface of CeO₂ contribute to the activation of O₂. The excellent selectivity of lactones is due to the adsorption of ethers and activation of the C(sp³)-H bond on Au/CeO₂.

Oxidative amidation by Cu(ii)–guanidine acetic acid immobilized on magnetized sawdust with eggshell as a natural base

Copper(ii)–guanidine acetic acid complex was immobilized on the surface of magnetized raw waste sawdust (SD) as an abundant natural biopolymer and employed as an efficient and recoverable catalyst in oxidative amidation reaction, while waste eggshell (ES) powder was used as a low-cost solid base.

Copper-catalyzed synthesis of α-ketoamides using water and dioxygen as the oxygen source

The reaction employing H₂O and O₂ as the co-oxygen source in the catalytic synthesis of α-ketoamides is described. This copper-catalyzed reaction is carried out in a tandem manner constituted by the hydroamination of alkyne, hydration of vinyl–Cu complex and subsequent oxidation. Isotope labeling and radical capture experiments reveal that the oxygen atom of α-ketone at α-ketoamides derives from O₂ and the oxygen atom of amide group originates from H₂O.

The reaction employing H₂O and O₂ as the co-oxygen source in the catalytic synthesis of α-ketoamides is described. This Cu-catalyzed reaction is carried out in a tandem manner constituted by hydroamination of alkyne, hydration of vinyl–Cu complex and subsequent oxidation.

Oxidation of amine α-carbon to amide: a review on direct methods to access the amide functionality

A number of methods have been adopted for the synthesis of amides; among these methods, the oxidation of an amine to an amide is growing in interest as a means to prepare this imperative functional group.

Cu-Catalysed oxidative amidation of cinnamic acids/arylacetic acids with 2° amines: an efficient synthesis of α-ketoamides

Copper-catalysed decarboxylation/oxidative amidation of cinnamic acids and oxidative amidation of arylacetic acids with 2° amines have been developed leading to the formation of α-ketoamides.

Asymmetric Synthesis of Chiral 1,2-Amino Alcohols and Morpholin-2-ones from Arylglyoxals

Chiral 1,2-amino alcohols are privileged scaffolds with important applications as drug candidates and chiral ligands. Although various methods for the preparation of this structural motif have been reported, these methods are limited because of the use of precious metals and ligands. Here, we report a practical and high yielding synthesis of chiral 1,2-amino alcohols using arylglyoxals and pseudoephedrine auxiliary. This reaction is catalyzed by a Brønsted acid and provides morpholinone products in high yields and selectivities. The morpholine ring was converted into 1,2-amino alcohols in a two-step protocol.

Copper-catalyzed synthesis of benzanilides from lignin model substrates 2-phenoxyacetophenones under an air atmosphere

A novel approach for the synthesis of benzanilides is presented via the Cu-catalyzed reaction of 2-phenoxyacetophenones with anilines under an air atmosphere, and a series of benzanilides can be obtained in high yields.

Aerobic oxidative amidation of alkynes using titanium oxide encapsulated cuprous iodide nanoparticles (CuI@TiO2)

A catalyst consisting of titanium oxide encapsulated cuprous iodide nanoparticles was prepared via a sol–gel method using inexpensive raw materials and was harnessed successfully in the oxidative amidation of alkynes via an environmentally benign and sustainable protocol.

Cu(i)/{Nb6O19} catalyzed N-acylation of arylacetic acids with amines under aerobic conditions

Employing a simple copper(i)/{Nb₆O₁₉} catalyst system, the reaction reported herein offers a facile process to give functionalized α-ketoamides from readily available arylacetic acids under aerobic conditions.

iEDDA Reaction of the Molecular Iodine-Catalyzed Synthesis of 1,3,5-Triazines via Functionalization of the sp3 C-H Bond of Acetophenones with Amidines: An Experimental Investigation and DFT Study

The present work reports an inverse electron demand Diels-Alder (iEDDA)-type reaction to synthesize 1,3,5-trizines from acetophenones and amidines. The use of molecular iodine in a catalytic amount facilitates the functionalization of the sp³ C-H bond of acetophenones. This is a simple and efficient methodology for the synthesis of 1,3,5-triazines in good to excellent yields under transition-metal-free and peroxide-free conditions. The reaction is believed to take place via an in situ iodination-based oxidative elimination of formaldehyde. DFT calculations at the M062X/6-31+G(d,p) level were employed to investigate the reaction mechanism. Reaction barriers for the cycloaddition as well as a formaldehyde expulsion steps were computed, and a multistep mechanism starting with the nucleophilic attack by benzamidine on an in situ generated imine intermediate has been proposed. Both local and global reactivity descriptors were used to study the regioselectivity of the addition steps.

Flexible and Chemoselective Oxidation of Amides to α-Keto Amides and α-Hydroxy Amides

A suite of flexible and chemoselective methods for the transition-metal-free oxidation of amides to α-keto amides and α-hydroxy amides is presented. These highly valuable motifs are accessed in good to excellent yields and stereoselectivities with high functional group tolerance. The utility of the method is showcased by the formal synthesis of a potent histone deacetylase inhibitor.

Copper-Catalyzed Oxidative Cyclization of 2-Amino-azaarenes with Lignin Models: Synthesis of 3-Phenoxy Imidazo Heterocycles

A catalytic oxidative cyclization of 2-aminopyridines or 2-aminobenzothiazole with 2-phenoxyacetophenones (a kind of lignin platform compound) was developed, efficiently providing valuable 3-phenoxy imidazo[1,2-a]pyridines or 3-phenoxy benzo[d]imidazo[2,1-b]thiazoles. The reaction was realized under oxygen by simply using inexpensive CuI as the catalyst.

Co/NHPI-mediated aerobic oxygenation of benzylic C-H bonds in pharmaceutically relevant molecules

A simple cobalt(ii)/N-hydroxyphthalimide catalyst system has been identified for selective conversion of benzylic methylene groups in pharmaceutically relevant (hetero)arenes to the corresponding (hetero)aryl ketones. The radical reaction pathway tolerates electronically diverse benzylic C-H bonds, contrasting recent oxygenation reactions that are initiated by deprotonation of a benzylic C-H bond. The reactions proceed under practical reaction conditions (1 M substrate in BuOAc or EtOAc solvent, 12 h, 90-100 °C), and they tolerate common heterocycles, such as pyridines and imidazoles. A cobalt-free, electrochemical, NHPI-catalyzed oxygenation method overcomes challenges encountered with chelating substrates that inhibit the chemical reaction. The utility of the aerobic oxidation method is showcased in the multigram synthesis of a key intermediate towards a drug candidate (AMG 579) under process-relevant reaction conditions.

Visible-light-induced oxidative formylation of N-alkyl-N-(prop-2-yn-1-yl)anilines with molecular oxygen in the absence of an external photosensitizer

Visible-light-induced oxidative formylation of N-alkyl-N-(prop-2-yn-1-yl)anilines with molecular oxygen without an external photosensitizer was developed under mild reaction conditions.

Copper-catalyzed aerobic oxidative intramolecular amidation of 2-aminophenylacetylenes: a domino process for the synthesis of isatin

A novel CuI-catalyzed oxidative amidation of 2-aminophenylacetylenes leading to the formation of isatins by using open air as an oxygen source has been developed. The reaction proceeded smoothly and provided a variety of isatin derivatives in good yields.

Chemoselective C(α)–C(β) bond cleavage of saturated aryl ketones with amines leading to α-ketoamides: a copper-catalyzed aerobic oxidation process with air

An unprecedented chemoselective C(α)–C(β) bond cleavage of simple saturated aryl ketones with amines leading to α-ketoamidesvia a copper-catalyzed aerobic oxidation process with air has been disclosed.

Copper-catalyzed aerobic oxidative coupling of ketones with P(O)–H compounds leading to β-ketophosphine oxides

A facile copper-catalyzed one-pot method for the synthesis of β-ketophosphine oxides has been developed via aerobic oxidative coupling of ketones with P(O)–H compounds assisted by TBSOTf at room temperature.