Cotton Textile/Iron Oxide Nanozyme Composites with Peroxidase-like Activity: Preparation, Characterization, and Application

At present, both native and immobilized nanoparticles are of great importance in many areas of science and technology. In this paper, we have studied magnetic iron oxide nanoparticles and their aggregates bound on woven cotton textiles employing two simple modification procedures. One modification was based on the treatment of textiles with perchloric-acid-stabilized magnetic fluid diluted with methanol followed by drying. The second procedure was based on the microwave-assisted conversion of ferrous sulfate at high pH followed by drying. The structure and functional properties of these modified textiles were analyzed in detail. Scanning electron microscopy of native and modified textiles clearly showed the presence of iron oxide nanoparticles on the surface of the modified cotton fibers. All of the modified textile materials exhibited light to dark brown color depending on the amount of the bound iron oxide particles. Magnetic measurements showed that the saturation magnetization values reflect the amount of magnetic nanoparticles present in the modified textiles. Small-angle X-ray and neutron scattering measurements were conducted for the detailed structural characterization at the nanoscale of both the native and magnetically modified textiles, and different structural organization of nanoparticles in the two kinds of textile samples were concluded. The textile-bound iron oxide particles exhibited peroxidase-like activity when the N,N-diethyl-p-phenylenediamine sulfate salt was used as a substrate; this nanozyme activity enabled rapid decolorization of crystal violet in the presence of hydrogen peroxide. The deposition of a sufficient amount of iron oxide particles on textiles enabled their simple magnetic separation from large volumes of solutions; if necessary, the magnetic response of the modified textiles can be simply increased by incorporation of a piece of magnetic iron wire. The simplicity of the immobilized nanozyme preparation and the low cost of all the precursors enable its widespread application, such as decolorization and degradation of selected organic dyes and other important pollutants. Other types of textile-bound nanozymes can be prepared and used as low-cost catalysts for a variety of applications.

Peroxidase-like activity of Fe-N-C single-atom nanozyme based colorimetric detection of galactose

Single atom nanozymes are the artificial enzymes with enzyme-like activity, which have attracted a great deal attention in recent years due to their unique merits such as remarkable stability, excellent atom utilization and low cost. Herein, a convenient and sensitive colorimetric strategy was developed for the sensing of galactose based on Fe-N-C single-atom nanozyme (Fe-SAzyme). The Fe-SAzyme was prepared through "isolation-pyrolysis" method that exhibited intrinsic peroxidase mimicking activity, which can quickly catalyze the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) to produce blue-colored oxTMB in the presence of hydrogen peroxide (H₂O₂). Galactose can be oxidized by galactose oxidase (Gal Ox) to generate H₂O₂, and Fe-SAzyme can be utilized for quantitative colorimetric detection of galactose. A good linearity between absorbance and the galactose concentration in the range of 50-500 μM was obtained with a detection limit of (LOD) 10 μM. The Fe-SAzyme based colorimetric strategy offered a rapid, convenient and economic way for galactose quantification detection, which could be used as an alternative method for galactosemia diagnosis.

Reagent-Free Colorimetric Assay for Galactose Using Agarose Gel Entrapping Nanoceria and Galactose Oxidase

A reagent-free colorimetric method for galactose quantification using a composite of cerium oxide nanoparticles (nanoceria) and galactose oxidase (Gal Ox) entrapped in an agarose gel was developed. In the presence of galactose, the Gal Ox entrapped within the agarose gel catalyzed the oxidation of galactose to generate H₂O₂, which induced a color change from white to intense yellow. This reaction occurred without any chromogenic substrate. This color transition is presumed to be due to the H₂O₂-mediated alteration of the oxidation state of cerium ions present on the surface of the nanoceria. The intensity of color change was quantified by acquiring an image with a conventional smartphone, converting the image to cyan-magenta-yellow-black (CMYK) mode, and subsequently analyzing the image using the ImageJ software. Using this strategy, galactose concentration was specifically determined with excellent sensitivity of as low as 0.05 mM. The analytical utility of the assay was successfully verified by correctly determining diverse levels of galactose in human serum, which is enough to diagnose galactosemia, a genetic disorder characterized by the malfunctioning of enzymes responsible for galactose metabolism. The assay employing a hydrogel composite with entrapped nanoceria and Gal Ox, is a simple, cost-effective, and rapid colorimetric assay for galactose quantification, without using any chromogenic reagent. This cost-effective method has great potential for the diagnosis of galactosemia and is highly promising in comparison to the laborious instrumentation-based methods currently in use.

Nanozymes for medical biotechnology and its potential applications in biosensing and nanotherapeutics

Recent past years have witnessed the development of several artificial enzymes, using different materials to mimic natural enzymes with respect to their structure and functions. The nanozymes are nanomaterials possessing similar characteristics to the natural enzymes and have emerged recently as an innovative class of artificial enzymes. The nanozymes have got remarkable attention from the researchers and notable developments have been achieved owing to their unique properties compared with natural enzymes and classic artificial enzymes. In this regard, several nanomaterials have been scrutinized so far to mimic different natural enzymes for wider applications ranging from imaging, sensing, water treatment, pollutant removal, and therapeutics. The applications of nanozymes in biomedicine research are fast-growing and various nanozymes have been implicated in diagnostic medicine, targeted cancer therapy. Such abilities make them an appropriate alternative for the development of affordable, sustainable and safe diagnostic as well as therapeutic agents.

Nanozymes: From New Concepts, Mechanisms, and Standards to Applications

Nanozymes are nanomaterials with intrinsic enzyme-like characteristics that have been booming over the past decade because of their capability to address the limitations of natural enzymes such as low stability, high cost, and difficult storage. Along with the rapid development and ever-deepening understanding of nanoscience and nanotechnology, nanozymes hold promise to serve as direct surrogates of traditional enzymes by mimicking and further engineering the active centers of natural enzymes. In 2007, we reported the first evidence that Fe₃O₄ nanoparticles (NPs) have intrinsic peroxidase-mimicking activity, and since that time, hundreds of nanomaterials have been found to mimic the catalytic activity of peroxidase, oxidase, catalase, haloperoxidase, glutathione peroxidase, uricase, methane monooxygenase, hydrolase, and superoxide dismutase. Uniquely, a broad variety of nanomaterials have been reported to simultaneously exhibit dual- or multienzyme mimetic activity. For example, Fe₃O₄ NPs show pH-dependent peroxidase-like and catalase-like activities; Prussian blue NPs simultaneously possess peroxidase-, catalase-, and superoxide dismutase-like activity; and Mn₃O₄ NPs mimic all three cellular antioxidant enzymes including superoxide dismutase, catalase, and glutathione peroxidase. Taking advantage of the physiochemical properties of nanomaterials, nanozymes have shown a broad range of applications from in vitro detection to replacing specific enzymes in living systems. With the emergence of the new concept of "nanozymology", nanozymes have now become an emerging new field connecting nanotechnology and biology. Since the landmark paper on nanozymes was published in 2007, we have extensively explored their catalytic mechanism, established the corresponding standards to quantitatively determine their catalytic activities, and opened up a broad range of applications from biological detection and environmental monitoring to disease diagnosis and biomedicine development. Here we mainly focus on our progress in the systematic design and construction of functionally specific nanozymes, the standardization of nanozyme research, and the exploration of their applications for replacing natural enzymes in living systems. We also show that, by combining the unique physicochemical properties and enzyme-like catalytic activities, nanozymes can offer a variety of multifunctional platforms with a broad of applications from in vitro detection to in vivo monitoring and therapy. For instance, targeting antibody-conjugated ferromagnetic nanozymes simultaneously provide three functions: target capture, magnetic separation, and nanozyme color development for target detection. We finally will address the prospect of nanozyme research to become "nanozymology". We expect that nanozymes with unique physicochemical properties and intrinsic enzyme-mimicking catalytic properties will attract broad interest in both fundamental research and practical applications and offer new opportunities for traditional enzymology.

Novel electrochemical sensing of galactose using GalOxNPs/CHIT modified pencil graphite electrode

For the construction of galactose biosensor, chitosan was electropolymerised onto the pencil graphite electrode. This chitosan modified pencil graphite electrode acts as good matrix for immobilization of enzyme nanoparticles of galactose oxidase. Development of this nanocomposite was further confirmed by Fourier transform infrared spectroscopy and scanning electron microscopy. The presence of chitosan makes the present galactose biosensor more efficient, reproducible and stable. The sensitivity was reported 7 × 10^-3 mA/mM/cm² with linear range from 0.05 to 25 mM and better detection limit of 0.05 mM. When the solution of galactose was spiked with 0.5 mM and 1 mM, the analytical recoveries were found 98.6% and 97.6%. A better storage stability was achieved (90days) when compared to earlier reported biosensors.

Multifunctional nanozymes: enzyme-like catalytic activity combined with magnetism and surface plasmon resonance

Over decades, as alternatives to natural enzymes, highly-stable and low-cost artificial enzymes have been widely explored for various applications. In the field of artificial enzymes, functional nanomaterials with enzyme-like characteristics, termed as nanozymes, are currently attracting immense attention. Significant progress has been made in nanozyme research due to the exquisite control and impressive development of nanomaterials. Since nanozymes are endowed with unique properties from nanomaterials, an interesting investigation is multifunctionality, which opens up new potential applications for biomedical sensing and sustainable chemistry due to the combination of two or more distinct functions of high-performance nanozymes. To highlight the progress, in this review, we discuss two representative types of multifunctional nanozymes, including iron oxide nanomaterials with magnetic properties and metal nanomaterials with surface plasmon resonance. The applications are also covered to show the great promise of such multifunctional nanozymes. Future challenges and prospects are discussed at the end of this review.

One-pot synthesis of the stable CdZnTeS quantum dots for the rapid and sensitive detection of copper-activated enzyme

Galactose oxidase is a copper-activated enzyme and have a vital role in metabolism of galactose. Much of the work is focused on determining the amount of galactose in the blood rather than measuring the amount of galactose oxidase to urge the galactosemia patients to restrict milk intake. Here, a simple and effective method was developed for Cu²⁺ and copper-activated enzyme detection based on homogenous alloyed CdZnTeS quantum dots (QDs). Meso- 2,3-dimercaptosuccinic acid (DMSA) was used as the reducing agent for preparing QDs and the highest quantum yield of CdZnTeS QDs was 69.4%. In addition, the as-prepared CdZnTeS QDs show superior fluorescence properties, such as good photo-/chemical stability. The DMSA was the surface ligand of the QDs, containing abundant -SH and -COOH, thus the surface ligands have a high affinity with Cu²⁺. Therefore, this developed probe can be applied for Cu²⁺ and galactose oxidase detection and shows a good sensitivity in the buffer. Then, this probe was successfully used for Cu²⁺ and galactose oxidase detection in real samples with the satisfactory results. The proposed fluorescence quenching strategy gives a new and simple insight for enzyme assay without the enzyme-catalyzed reaction.

Iron Oxide Nanozyme: A Multifunctional Enzyme Mimetic for Biomedical Applications

Iron oxide nanoparticles have been widely used in many important fields due to their excellent nanoscale physical properties, such as magnetism/superparamagnetism. They are usually assumed to be biologically inert in biomedical applications. However, iron oxide nanoparticles were recently found to also possess intrinsic enzyme-like activities, and are now regarded as novel enzyme mimetics. A special term, "Nanozyme", has thus been coined to highlight the intrinsic enzymatic properties of such nanomaterials. Since then, iron oxide nanoparticles have been used as nanozymes to facilitate biomedical applications. In this review, we will introduce the enzymatic features of iron oxide nanozyme (IONzyme), and summarize its novel applications in biomedicine.

Amplified Peroxidase-Like Activity in Iron Oxide Nanoparticles Using Adenosine Monophosphate: Application to Urinary Protein Sensing

Numerous compounds such as protein and double-stranded DNA have been shown to efficiently inhibit intrinsic peroxidase-mimic activity in Fe₃O₄ nanoparticles (NP) and other related nanomaterials. However, only a few studies have focused on finding new compounds for enhancing the catalytic activity of Fe₃O₄ NP-related nanomaterials. Herein, phosphate containing adenosine analogs are reported to enhance the oxidation reaction of hydrogen peroxide (H₂O₂) and amplex ultrared (AU) for improving the peroxidase-like activity in Fe₃O₄ NPs. This enhancement is suggested to be a result of the binding of adenosine analogs to Fe²⁺/Fe³⁺ sites on the NP surface and from adenosine 5'-monophosphate (AMP) acting as the distal histidine residue of horseradish peroxidase for activating H₂O₂. Phosphate containing adenosine analogs revealed the following trend for the enhanced activity of Fe₃O₄ NPs: AMP > adenosine 5'-diphosphate > adenosine 5'-triphosphate. The peroxidase-like activity in the Fe₃O₄ NPs progressively increased with increasing AMP concentration and polyadenosine length. The Michaelis constant for AMP attached Fe₃O₄ NPs is 5.3-fold lower and the maximum velocity is 2.7-fold higher than those of the bare Fe₃O₄ NPs. Furthermore, on the basis of AMP promoted peroxidase mimicking activity in the Fe₃O₄ NPs and the adsorption of protein on the NP surface, a selective fluorescent turn-off system for the detection of urinary protein is developed.

Synergistic Degradation of a Hyperuricemia-Causing Metabolite Using One-Pot Enzyme-Nanozyme Cascade Reactions

Multi-enzyme cascade reactions are frequently found in living organisms, in particular when an intermediate should be eliminated. Recently, enzyme-mimic nanomaterials (nanozymes) received much attention for various applications, because they are usually more stable and cost-effective than enzymes. However, enzyme-nanozyme cascade reations have not been yet extensively exploited. Therefore, in this study, we investigated one-pot enzyme-nanozyme cascade reactions using urate oxidase (UOX) and catalase-mimic gold nanoparticle nanozyme (AuNP) with the ultimate goal of treatment of hyperuricemia. UOX degrades hyperuricemia-causing uric acid, but also generates hydrogen peroxide raising several health concerns. We successfully demonstrated that one-pot UOX-AuNP cascade systems degrade uric acid more than five times faster than UOX alone, by eliminating potentially cytotoxic hydrogen peroxide, similar to enzyme-enzyme reactions.

Dual enzyme mimicry exhibited by ITO nanocubes and their application in spectrophotometric and electrochemical sensing

Schematic illustration of the peroxidase/catalase-like activities of ITO nanocubes.

Ultrafast sonochemical synthesis of protein-inorganic nanoflowers

We developed a simple but efficient method to synthesize protein-inorganic hybrid nanostructures with a flower-like shape (nanoflowers), which relies on sonication to facilitate the synthesis of the nanoflowers. With this technique, we synthesized nanoflowers containing laccase as a model protein and copper phosphate within 5 minutes at room temperature. The resulting laccase nanoflowers yielded greatly enhanced activity, stability, and reusability, and their usefulness was successfully demonstrated by applying them in the colorimetric detection of epinephrine. The strategy developed could be used to rapidly synthesize nanoflowers for various applications in biosensor and enzyme catalysis and would expand the utilization of nanoflowers in diverse fields of biotechnology.

Cell-based method utilizing fluorescent Escherichia coli auxotrophs for quantification of multiple amino acids

A cell-based assay system for simultaneous quantification of the three amino acids, phenylalanine (Phe), methionine (Met), and leucine (Leu) in a single biological sample, was developed and applied in the multiplex diagnosis of three key metabolic diseases of newborn babies. The assay utilizes three Escherichia coli auxotrophs, which grow only in the presence of the corresponding target amino acids and which contain three different fluorescent reporter plasmids that produce distinguishable fluorescence signals (red, green, and cyan) in concert with cell growth. To mixtures of the three auxotrophs, immobilized on agarose gels arrayed on a well plate, is added a test sample. Following incubation, the concentrations of the three amino acids in the sample are simultaneously determined by measuring the intensities of three fluorescence signals that correspond to the reporter plasmids. The clinical utility of this assay system was demonstrated by employing it to identify metabolic diseases of newborn babies through the quantification of Phe, Met, and Leu in clinically derived dried blood spot specimens. The general strategy developed in this effort should be applicable to the design of new assay systems for the quantification of multiple amino acids derived from complex biological samples and, as such, to expand the utilization of cell-based analytical systems that replace conventional, yet laborious methods currently in use.

A novel colorimetric immunoassay utilizing the peroxidase mimicking activity of magnetic nanoparticles

A simple colorimetric immunoassay system, based on the peroxidase mimicking activity of Fe3O4 magnetic nanoparticles (MNPs), has been developed to detect clinically important antigenic molecules. MNPs with ca. 10 nm in diameter were synthesized and conjugated with specific antibodies against target molecules, such as rotaviruses and breast cancer cells. Conjugation of the MNPs with antibodies (MNP-Abs) enabled specific recognition of the corresponding target antigenic molecules through the generation of color signals arising from the colorimetric reaction between the selected peroxidase substrate, 3,3',5,5'-tetramethylbenzidine (TMB) and H2O2. Based on the MNP-promoted colorimetric reaction, the target molecules were detected and quantified by measuring absorbance intensities corresponding to the oxidized form of TMB. Owing to the higher stabilities and economic feasibilities of MNPs as compared to horseradish peroxidase (HRP), the new colorimetric system employing MNP-Abs has the potential of serving as a potent immunoassay that should substitute for conventional HRP-based immunoassays. The strategy employed to develop the new methodology has the potential of being extended to the construction of simple diagnostic systems for a variety of biomolecules related to human cancers and infectious diseases, particularly in the realm of point-of-care applications.

Effective peroxidase-like activity of a water-solubilized Fe-aminoclay for use in immunoassay

In this study, we developed a colorimetric sensor for the determination of the peroxidase-like activity of Fe-aminoclay, which was used as a novel way of immunoassay for lung cancer was examined. Fe-aminoclay was synthesized by a facile sol-gel reaction under ambient conditions, with both amino sites and Fe surface exposed outside. This Fe-aminoclay, which exhibits strong peroxidase-like activity particularly over a wide pH range, was explored as a robust and rugged replacement of peroxidase enzymes. The peroxidase-like activity of Fe-aminoclay was proved by means of the production of a blue-colored product by 3,3',5,5'-tetramethylbenzidine (TMB) in the presence of hydrogen peroxide (H₂O₂). This unique activity, in a folic acid-conjugated form, was evaluated for its ability to specifically detect folate receptor-positive A549 cell, which was compared to a human lung normal cell line with lack of the expression of the folate receptor. The chromatic response, which was even detectable by naked eyes, displayed gradational variation, proportional to the number of cells (up to 20,000 cells).