Stripping voltammetry study of ultra-trace toxic metal ions on highly selectively adsorptive porous magnesium oxide nanoflowers

High efficiency Hg(II) electrochemical detection based on the number of defect engineering on MoS2: Insight in synergistic action of sulfur vacancies and undercoordinated Mo

Defects on nanomaterials can effectively enhance the performance of electrochemical detection, but an excessive number of defects may have an adverse effect. In this study, MoS2 nanosheets were synthesized using a hydrothermal synthesis method. By controlling the calcination temperature, MoS2-7H, calcined at 700 °C under H2/Ar2, exhibited an optimal ratio of "point" defects to "plane" defects, resulting in excellent detection performance for mercury ions (Hg(II)). In general, the sulfur vacancies (SV) and undercoordinated Mo generated after calcination of MoS2 significantly promotes the adsorption process and redox of Hg(II) by increasing surface chemical activity, providing additional adsorption sites and adjusting surface charge status to accelerate the catalytic redox of Hg(II). The prepared MoS2-7H-modified electrode showed a sensitivity of 18.25 μA μM-1 and a low limit of detection (LOD) of 6.60 nM towards Hg(II). MoS2-7H also demonstrated a good anti-interference, stability, and exhibited a strong current response in real water samples. The modulation to obtain appropriate number of defects in MoS2 holds promise as a prospective electrode modification material for the electroanalysis.

Electrochemical Sensors for Heavy Metal Ion Detection in Aqueous Medium: A Systematic Review

Heavy metal ions (HMIs) are very harmful to the ecosystem when they are present in excess of the recommended limits. They are carcinogenic in nature and can cause serious health issues. So, it is important to detect the metal ions quickly and accurately. The metal ions arsenic (As3+), cadmium (Cd2+), chromium (Cr3+), lead (Pb2+), and mercury (Hg2+) are considered to be very toxic among other metal ions. Standard analytical methods like atomic absorption spectroscopy, atomic fluorescence spectroscopy, and X-ray fluorescence spectroscopy are used to detect HMIs. But these methods necessitate highly technical equipment and lengthy procedures with skilled personnel. So, electrochemical sensing methods are considered to be more advantageous because of their quick analysis with precision and simplicity to operate. They can detect a wide range of heavy metals providing real-time monitoring and are cost-effective and enable multiparametric detection. Various sensing applications necessitate severe regulation regarding the modification of electrode surfaces. Numerous nanomaterials such as graphene, carbon nanotubes, and metal nanoparticles have been extensively explored as interface materials in electrode modifiers. These nanoparticles offer excellent electrical conductivity, distinctive catalytic properties, and high surface area resulting in enhanced electrochemical performance. This review examines different HMI detection methods in an aqueous medium by an electrochemical sensing approach and studies the recent developments in interface materials for altering the electrodes.

Advancement of metal oxide nanomaterials on agri-food fronts

The application of metal oxide nanomaterials (MOx NMs) in the agrifood industry offers innovative solutions that can facilitate a paradigm shift in a sector that is currently facing challenges in meeting the growing requirements for food production, while safeguarding the environment from the impacts of current agriculture practices. This review comprehensively illustrates recent advancements and applications of MOx for sustainable practices in the food and agricultural industries and environmental preservation. Relevant published data point out that MOx NMs can be tailored for specific properties, enabling advanced design concepts with improved features for various applications in the agrifood industry. Applications include nano-agrochemical formulation, control of food quality through nanosensors, and smart food packaging. Furthermore, recent research suggests MOx's vital role in addressing environmental challenges by removing toxic elements from contaminated soil and water. This mitigates the environmental effects of widespread agrichemical use and creates a more favorable environment for plant growth. The review also discusses potential barriers, particularly regarding MOx toxicity and risk evaluation. Fundamental concerns about possible adverse effects on human health and the environment must be addressed to establish an appropriate regulatory framework for nano metal oxide-based food and agricultural products.

Pb2+ Ion Sensors Employing Gold Etching Process: Comparative Investigation on Au Nanorods and Au Nanotriangles

The leaching phenomenon of gold (Au) nanomaterials by Pb2+ ions in the presence of 2-mercaptoethanol (2-ME) and thiosulfate (S2O32- ion) has been systematically applied to a Pb2+ ion sensor. To further investigate the role of Pb2+ ions in sensors containing Au nanomaterials, we revisited the leaching conditions for Au nanorods and compared them with the results for Au nanotriangles. By monitoring the etching rate, it was revealed that Pb2+ ions were important for the acceleration of the etching rate mainly driven by 2-ME and S2O32- pairs, and nanomolar detection of Pb2+ ions were shown to be promoted through this catalytic effect. Using the etchant, the overall size of the Au nanorods decreased but showed an unusual red-shift in UV-Vis spectrum indicating increase of aspect ratio. Indeed, the length of Au nanorods decreased by 9.4% with the width decreasing by 17.4% over a 30-min reaction time. On the other hand, the Au nanotriangles with both flat sides surrounded mostly by dense Au{111} planes showed ordinary blue-shift in UV-Vis spectrum as the length of one side was reduced by 21.3%. By observing the changes in the two types of Au nanomaterials, we inferred that there was facet-dependent alloy formation with lead, and this difference resulted in Au nanotriangles showing good sensitivity, but lower detection limits compared to the Au nanorods.

Sensitive sensing of Hg(II) based on lattice B and surface F co-doped CeO2: Synergies of catalysis and adsorption brought by doping site engineering

Transition metal oxides are widely used in the detection of heavy metal ions (HMIs), and the co-doping strategy that introducing a variety of different dopant atoms to modify them can obtain a better detection performance. However, there is very little research on the co-doped transition metal oxides by non-metallic elements for electrochemical detection. Herein, boron (B) and fluorine (F) co-doped CeO2 nanomaterial (BFC) is constructed to serve as the electrochemically sensitive interface for the detection of Hg(II). B and F affect the sensitivity of CeO2 to HMIs when they were introduced at different doping sites. Through a variety of characterization, it is proved that B is successfully doped into the lattice and F is doped on the surface of the material. Through the improvement of the catalytic properties and adsorption capacity of CeO2 by different doping sites, this B and F co-doped CeO2 exhibits excellent square wave anodic stripping voltammetry (SWASV) current responses to Hg(II). Both the high sensitivity of 906.99 μA μM-1 cm-2 and the low limit of detection (LOD) of 0.006 μM are satisfactory. Besides, this BFC glassy carbon electrode (GCE) also has good anti-interference property, which has been successfully used in the detection of Hg(II) in actual water. This discovery provides a useful strategy for designing a variety of non-metallic co-doped transition metal oxides to construct trace heavy metal ion-sensitive interfaces.

Preconcentration of Pb(II) by Magnetic Metal-Organic Frameworks and Analysis Using Graphite Furnace Atomic Absorption Spectroscopy

In this study, a magnetic metal-organic framework (MOF) was synthesized based on magnetic Fe₃O₄, Cu(II), and benzene-1,3,5-tricarboxylic acid (Cu-BTC) as a sorbent for solid phase extraction (SPE) of trace amounts of Pb(II) in water and lettuce samples. Pb(II) ion was adsorbed on the magnetic MOF and easily separated by a magnet; therefore, no filtration or centrifugation was necessary. The analyte ions were eluted by HCl 0.5 mol·L^-1 and analyzed via graphite furnace atomic absorption spectroscopy. The prepared sorbent was characterized by scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), and Fourier transform-infrared (FT-IR) spectroscopy. Under optimal experimental conditions, the method had a linear range of 0.1-50 μg·L^-1. The limits of detection and quantitation for lead were found to be 0.026 and 0.08 μg·L^-1, respectively. The results showed that the prepared sorbent has high selectivity for Pb²⁺ even in the presence of other interfering metal ions.

General Strategies to Construct Highly Efficient Sensing Interfaces for Metal Ions Detection from the Perspective of Catalysis

Constructing high-effective electrode sensing interfaces has been considered an effective method for electrochemical detection toward heavy metal ions (HMIs). However, most research has been devoted to enhancing the stripping currents of HMIs by simply improving the adsorptive capacity and conductivity of the electrode modified materials, while lacking theoretical guidelines in fabricating catalytic sensing interfaces. Besides, the understanding of detection mechanisms is quite unscientific from the perspective of catalysis. This perspective summarizes five general strategies in designing highly efficient sensing interfaces in the recent five years, including modulating crystal phases, orientations and planes, defect engineering, ionic valence state cycle engineering, adsorption in situ catalysis strategy, and construction of atomic level catalytic active sites. What's more, the catalytic mechanisms for improving the signals of HMIs, such as boosting the electron transfer rates and conversion rates, lowering the energy barriers, etc., are introduced and emphasized. This study has a great significance in directionally controlling functionalized electrochemical sensors to achieve excellent sensitivity and selectivity in detecting environmental pollutants from the view of catalysis, and it also brings enlightenments and guidance to develop new electroanalytical methods.

Sensing Material-Dependent Interference of Multiple Heavy Metal Ions: Experimental and Simulated Thermodynamics Study on Cu(II), Cd(II), and As(III) Electroanalysis

Interference among multiple heavy metal ions (HMIs) is a significant problem that must be solved in electroanalysis, which extremely restricts the practical popularization of electrochemical sensors. However, due to the limited exploration of the intrinsic mechanism, it is still difficult to confirm the influencing factors. In this work, a series of experimental and theoretical electroanalysis models have been established to investigate the electroanalysis results of Cu(II), Cd(II), As(III), and their mixtures, which were based on the simple structure and stable coordination of nickel single-atom catalysts. X-ray absorption spectroscopy and density functional theory calculations were used to reveal the underlying detection mechanism of the 50-fold boosting effect of Cu(II) on As(III) while Cd(II) inhibits As(III). Combining the application of the thermodynamic model and Fourier transform infrared reflection, the specific interaction of the nanomaterials and HMIs on the interface is considered to be the fundamental source of the interference. This work opens up a new way of thinking about utilizing the unique modes of interplay between nanomaterials and HMIs to achieve anti-interference intelligent electrodes in stripping analysis.

Direct Mercury Detection in Landfill Leachate Using a Novel AuNP-Biopolymer Carbon Screen-Printed Electrode Sensor

A novel Au nanoparticle (AuNP)-biopolymer coated carbon screen-printed electrode (SPE) sensor was developed through the co-electrodeposition of Au and chitosan for mercury (Hg) ion detection. This new sensor showed successful Hg2+ detection in landfill leachate using square wave anodic stripping voltammetry (SWASV) with an optimized condition: a deposition potential of -0.6 V, deposition time of 200 s, amplitude of 25 mV, frequency of 60 Hz, and square wave step voltage of 4 mV. A noticeable peak was observed at +0.58 V associated with the stripping current of the Hg ion. The sensor exhibited a good sensitivity of ~0.09 μA/μg (~0.02 μA/nM) and a linear response over the concentration range of 10 to 100 ppb (50-500 nM). The limit of detection (LOD) was 1.69 ppb, which is significantly lower than the safety limit defined by the United States Environmental Protection Agency (USEPA). The sensor had an excellent selective response to Hg2+ in landfill leachate against other interfering cations (e.g., Zn2+, Pb2+, Cd2+, and Cu2+). Fifteen successive measurements with a stable peak current and a lower relative standard deviation (RSD = 5.1%) were recorded continuously using the AuNP-biopolymer-coated carbon SPE sensor, which showed excellent stability, sensitivity and reproducibility and consistent performance in detecting the Hg2+ ion. It also exhibited a good reliability and performance in measuring heavy metals in landfill leachate.

Nanostructures for Biosensing, with a Brief Overview on Cancer Detection, IoT, and the Role of Machine Learning in Smart Biosensors

Biosensors are essential tools which have been traditionally used to monitor environmental pollution and detect the presence of toxic elements and biohazardous bacteria or virus in organic matter and biomolecules for clinical diagnostics. In the last couple of decades, the scientific community has witnessed their widespread application in the fields of military, health care, industrial process control, environmental monitoring, food-quality control, and microbiology. Biosensor technology has greatly evolved from in vitro studies based on the biosensing ability of organic beings to the highly sophisticated world of nanofabrication-enabled miniaturized biosensors. The incorporation of nanotechnology in the vast field of biosensing has led to the development of novel sensors and sensing mechanisms, as well as an increase in the sensitivity and performance of the existing biosensors. Additionally, the nanoscale dimension further assists the development of sensors for rapid and simple detection in vivo as well as the ability to probe single biomolecules and obtain critical information for their detection and analysis. However, the major drawbacks of this include, but are not limited to, potential toxicities associated with the unavoidable release of nanoparticles into the environment, miniaturization-induced unreliability, lack of automation, and difficulty of integrating the nanostructured-based biosensors, as well as unreliable transduction signals from these devices. Although the field of biosensors is vast, we intend to explore various nanotechnology-enabled biosensors as part of this review article and provide a brief description of their fundamental working principles and potential applications. The article aims to provide the reader a holistic overview of different nanostructures which have been used for biosensing purposes along with some specific applications in the field of cancer detection and the Internet of things (IoT), as well as a brief overview of machine-learning-based biosensing.

Water-locking molecule-assisted fabrication of nature-inspired Mg(OH)2 for highly efficient and economical uranium capture

With the depletion of uranium terrestrial deposits, researchers have focused on the development of adsorbents to extract radioactive uranium from seawater/wastewater. However, the artificial manipulation of adsorbents for the cost-effective extraction of radioactive uranium from large numbers of water samples is still significantly challenging. Herein, a facile yet versatile stepwise strategy has been reported for the fabrication of adsorbents. Magnesium hydroxide (Mg(OH)2) was fabricated via the in situ conversion of a natural ore powder (magnesite), whose unique internal pore structure is highly suitable for the development of highly efficient sorbents. The coordination interaction of the synthesized adsorbent with uranium was enhanced by further introducing inexpensive molecules with water-locking properties, which resulted in superior extraction capacity and low production cost. After careful calculation, the cost per kilogram of the adsorbent was found to be about $0.21. The adsorption behaviors of the synthesized adsorbent CMC-PAM/Mg(OH)2 were investigated by batch adsorption, flow-through column adsorption (in laboratory), and field adsorption experiments in natural seawater and river. Representatively, CMC-PAM/Mg(OH)2 was exceptional in extracting uranium not only at high concentrations with sufficient capacities in a wide pH range (1584.67 mg g-1 and 454.55 mg g-1 at pH = 5 and pH = 8, respectively), but also in trace quantities including uranium in a flow-through column (55.68 mg g-1), natural seawater (8.6 mg g-1), and river (6.7 mg g-1). Inspired by this excellent performance, the effects of competitive ions on the selective adsorption of uranium by CMC-PAM/Mg(OH)2 in simulated wastewater and seawater environments were further studied. Using a combination of FTIR spectroscopic and XPS studies, it was revealed that the amine and hydroxyl groups enhanced the overall uranyl affinity of the CMC-PAM/Mg(OH)2 composite.

Preconcentration of Pb with Aminosilanized Fe3O4 Nanopowders in Environmental Water Followed by Electrothermal Atomic Absorption Spectrometric Determination

A new preconcentration method to determine lead in environmental waters using the aminosilanized magnetite Fe3O4 powder sorbent has been developed. The preconcentration method was combined with electrothermal atomization atomic absorption spectrometry (ETAAS) and a graphite atomizer. Trace amount of sorbent (3 mg) could be applied into the preconcentration of Pb. According the preconcentration, the detection limits were 14 and 19 pg·mL−1 with bare and aminosilanized Fe3O4, respectively. The effect of interferent elements such as Al, Ca, Co, Fe, K, Mg, Na, Ni, and Zn (1000 ng·mL−1 versus Pb 1 ng·mL−1) on the preconcentration of Pb using bare magnetite was evaluated, and some elements (Al, Ni, and Zn) were found to interfere with the Pb preconcentration. The aminosilanized Fe3O4 sorbent was found to be effective in eliminating the severe interferences. The enrichment factors were 34 for the preconcentration with aminosilanized Fe3O4. The recovery of spiked Pb in the case of the sorbent with aminosilanized Fe3O4 was in the range of 75 to 110%. From the analytical data, the preconcentration technique was found to be useful for the determination of trace lead in environmental waters.

Sensitivity limits of biosensors used for the detection of metals in drinking water

Even when present in very low concentrations, certain metal ions can have significant health impacts depending on their concentration when present in drinking water. In an effort to detect and identify trace amounts of such metals, environmental monitoring has created a demand for new and improved methods that have ever-increasing sensitivities and selectivity. This paper reviews the sensitivities of over 100 recently published biosensors using various analytical techniques such as fluorescence, voltammetry, inductively coupled plasma techniques, spectrophotometry and visual colorimetric detection that display selectivity for copper, cadmium, lead, mercury and/or aluminium in aqueous solutions.

An Electrochemical Sensor of Poly(EDOT-pyridine-EDOT)/Graphitic Carbon Nitride Composite for Simultaneous Detection of Cd2+ and Pb2

In this study, poly(2,5-bis(3,4-ethylenedioxythienyl)pyridine)/graphitic carbon nitride composites (poly(BPE)/g-C₃N₄) were prepared by an in situ chemical polymerization method. Composites were characterized by using Fourier transform infrared spectroscopy (FT-IR), ultraviolet⁻visible absorption spectra (UV⁻vis), X-ray diffraction (XRD), energy-dispersive X-ray spectroscopy (EDS), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Furthermore, electrochemical sensors were applied for the electrochemical determination of Cd²⁺ and Pb²⁺ using the differential pulse voltammetry (DPV) method. The results indicated that 10 wt % poly(BPE)/g-C₃N₄ composite-modified electrode exhibited linear detection ranging from 0.12 to 7.2 μM and 0.08 to 7.2 μM for Cd²⁺ and Pb²⁺, with detection limits (S/N = 3) of 0.018 μM and 0.00324 μM. Interference analysis suggested that the 10 wt % poly(BPE)/g-C₃N₄-modified electrode can be applied for the detection of the Cd²⁺ and Pb²⁺ in real samples.

Competitive adsorption behavior toward metal ions on nano-Fe/Mg/Ni ternary layered double hydroxide proved by XPS: Evidence of selective and sensitive detection of Pb(II)

Hypersensitive and highly selective nanomaterials for the measurement of heavy metal ions (HMIs) hold a key to electro-analysis. Various works improved the results of analysis but without scientific understanding. Herein, Fe/Mg/Ni-layered double hydroxide (LDH) has been successfully prepared and its electrochemical behavior for Pb(II) detection is also studied using square wave anodic stripping voltammetry (SWASV). The well performance of electrochemistry suggest that the modification with Fe/Mg/Ni-LDH significantly promotes the selectivity and sensitivity toward Pb(II). The sensitivity on Fe/Mg/Ni-LDH modified glassy carbon electrode (GCE) is 68.1μAμM^-1 over the range from 0.03 to 1.0μM under the optimized conditions. Otherwise, the selectivity, anti-interference, stability measurements and practical implications of Fe/Mg/Ni-LDH modified GCE are also performed. What^,s more, a reasonable mechanism of detection for Pb(II) including selectivity and sensitivity is proposed based on adsorption and characterized using XPS and XRD. These findings provide a potentially excellent material to improve the sensitivity and selectivity for toxic metal ions as well as a deep understanding of detection.

Multi-element determination of metals and metalloids in waters and wastewaters, at trace concentration level, using electroanalytical stripping methods with environmentally friendly mercury free-electrodes: A review

Nowadays, water is no longer regarded as an inexhaustible resource and the excessive release and proliferation of toxic metal(loid)s into aquatic environments has become a critical issue. Therefore, fast, accurate, simple, selective, sensitive and portable methodologies to detect multiple elements in natural waters is of paramount importance. Electrochemical stripping analysis is an efficient tool for trace metal(loid)s determinations and bring new prospects for answering the current environmental concerns. This review presents a survey of the advancements made between 2003 and 2016 on the development and application of non-toxic mercury free electrodes on the simultaneous analysis of metals and metalloids in waters and wastewaters by means of electroanalytical stripping techniques. The advantages, limitations, improvements and real applications of these "green" sensors are discussed from a critical point of view.

Synthesis and Characterization of Porous MnCo2O4 for Electrochemical Determination of Cadmium ions in Water Samples

To utilize the maximum activity of nanomaterials, it was specifically synthesized by appropriate physicochemical properties. In that aspect, we have described the synthesis of porous MnCo2O4 by simple chemical route and applied for the selective detection of cadmium (Cd (II)). The as-prepared porous MnCo2O4 was characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Brunauer-Emmett-Teller (BET) adsorption isotherm, X-ray diffraction pattern analysis (XRD), Fourier transform infra-red spectroscopy (FT-IR), energy dispersive X-ray (EDX) and electrochemical techniques. The porous MnCo2O4 exhibited an excellent electrochemical behaviour and good analytical response towards the determination of Cd (II). Those analytical factors such as pH, deposition potential and deposition time are optimized by using differential pulse anodic stripping voltammetry (DPASV). A wide linear concentration range from 2.3 to 120 µg L-1, limit of detection (LOD) of 0.72 µg L-1 and the limit of quantification (LOQ) of 0.91 µg L-1 were achieved for determination of Cd (II). The selectivity of the developed sensor was explored in the presence of co-interfering ions. Also our sensor exhibits a good stability, reproducibility and repeatability. In addition, the practicability of proposed sensor was evaluated for the detection of Cd (II) in real water samples.

An electrochemical sensor based on Co3O4 nanosheets for lead ions determination

In this work, Co₃O₄ nanosheets were fabricated on indium tin oxide (ITO) substrates by developing a simple electrochemical deposition and annealing method for lead ions detection.

A sensitive electrochemical sensor using an iron oxide/graphene composite for the simultaneous detection of heavy metal ions

We report an analytical assessment of an iron oxide (Fe2O3)/graphene (G) nanocomposite electrode used in combination with in situ plated bismuth (Bi) working as an electrochemical sensor for the determination of trace Zn(2+), Cd(2+), and Pb(2+). The as-synthesized nanocomposites were characterized by transmission electron microscopy, scanning electron microscopy, thermo-gravimetric analyzer, and X-ray diffraction. The electrochemical properties of the Fe2O3/G/Bi composite modified electrode were investigated. Differential pulse anodic stripping voltammetry was applied for the detection of metal ions. Due to the synergetic effect between graphene and the Fe2O3 nanoparticles, the modified electrode showed improved electrochemical catalytic activity high sensitivity toward trace heavy metal ions. Several parameters such as the preconcentration potential, bismuth concentration, preconcentration time, and pH were carefully optimized to determine the target metal ions. Under optimized conditions, the linear range of the electrode was 1-100μgL(-1) for Zn(2+), Cd(2+), and Pb(2+), and the detection limits were 0.11μgL(-1), 0.08μgL(-1), and 0.07μgL(-1), respectively (S/N =3). Repeatability (% RSD) was found to be 1.68% for Zn(2+), 0.92% for Cd(2+), and 1.69% for Pb(2+) for single sensor with 10 measurements and 0.89% for Zn(2+), 1.15% for Cd(2+), and 0.91% for Pb(2+) for 5 different electrodes. The Fe2O3/G/Bi composite electrode was successfully applied to the analysis of trace metal ions in real samples. The solventless thermal decomposition method applied to the simple and easy synthesis of nanocomposite electrode materials can be extended to the synthesis of nanocomposites and promising electrode materials for the determination of heavy metal ions.

An atomically thick titanium phosphate thin layer with enhancing electrochemical sensitivity toward Pb(ii)

An atomically thick titanium phosphate thin layer is synthesized and used for sensitive electrochemical detection for Pb(ii) with a high sensitivity and low limit of detection.