A label-free G-quadruplex-based switch-on fluorescence assay for the selective detection of ATP

A Novel Pb2+and Cys Induced Switch Off-On Strategy and Its Application in Detection Based on the Platform of N-Methylmesoporphyrin IX Fluorescence Being Amplied by G-Quadruplex

Lead (Pb2+) ions give an imminent danger since they have been known to cause persistent damage to humans, plants, and animals, even at low concentrations, and cysteine (Cys) elevated levels are critical indicators for many diseases. Therefore, their detection is critical in pharmaceutical and environmental samples. This study tailored an innovative fluorescence switch off-on assay to detect Pb2+ and Cys based on the amplification of G-quadruplex (G-4) to N-methylmesoporphyrin IX (NMM). This assay operates on the fluorescence of NMM serving as a signal reporter which could be enhanced by an adenine-guanine-rich probes G-4. Initially, the fluorescence of NMM was increased after binding with G-4 and Pb2+ and effectively quenching fluorescence without altering the structure of G-4. As it was proved by Circular dichroism (CD). The number of binding sites for Pb2+ per NMM was determined to be 0.80 with a binding constant of 1.9 × 104 mol /L. The presence of Cys may disrupt the interaction between Pb2+ and G-4/NMM due to its stronger binding affinity towards Pb2+ leading to high fluorescence recovery.The assay demonstrated the capability to detect Pb2⁺ within a concentration range of 0.4 to 1.6 μM, achieving a high correlation coefficient (R2 = 0.985). with the detection limit of 0.45 μM was established. Similarly, Cys was effectively detected across a range of 1 to 6 μM, possessing correlation (R2 = 0.973) with a detection limit of 1.51 μM, further confirming that the detection limit is not influenced by the starting point of the linear range. The assay detected these compounds among various other amino acids and heavy metals. Our approach is simple and innovative, enabling the accurate determination of Pb2+ and Cys concentrations in soil and medicinal samples, highlighting its potential in practical diagnostic and environmental applications.

The Construction of DNA Logic Gates Restricted to Certain Live Cells Based on the Structure Programmability and Aptamer-Cell Affinity of G-Quadruplexes

DNA computation is considered a fascinating alternative to silicon-based computers; it has evoked substantial attention and made rapid advances. Besides realizing versatile functions, implementing spatiotemporal control of logic operations, especially at the cellular level, is also of great significance to the development of DNA computation. However, developing simple and efficient methods to restrict DNA logic gates performing in live cells is still a challenge. In this work, a series of DNA logic gates was designed by taking full advantage of the diversity and programmability of the G-quadruplex (G4) structure. More importantly, by further using the high affinity and specific endocytosis of cells to aptamer G4, an INHIBIT logic gate has been realized whose operational site is precisely restricted to specific live cells. The design strategy might have great potential in the field of molecular computation and smart bio-applications.

Redox-Switchable Binding Properties of the ATP-Aptamer

In this study, we report on a redox-controllable and reversible complete "ON"/"OFF"-switchable aptamer binding to ATP. A series of methylene blue-modified ATP-aptamers was synthesized, revealing improved binding affinities toward ATP as compared to the nonmodified aptamer. These binding affinities were dependent on the conjugation site of the redox label on the aptamer scaffold. Importantly, we find that the oxidized methylene blue-modified aptamers bind to ATP with micromolar affinity, while the reduced form lacks binding affinity toward ATP, resulting in an unprecedented complete "ON"/"OFF" redox-controllable aptamer switch. We demonstrate the cyclic "ON"/"OFF" binding of ATP to the methylene blue-functionalized aptamer through cyclic oxidation and reduction of the redox label using both chemical and electrochemical means. Molecular dynamics and docking simulations were performed to account for the redox-switchable properties of the conjugated aptamers and to rationalize the enhanced binding affinities of the different aptamer designs.

G-Quadruplex-Based Fluorescent Turn-On Ligands and Aptamers: From Development to Applications

Guanine (G)-quadruplexes (G4s) are unique nucleic acid structures that are formed by stacked G-tetrads in G-rich DNA or RNA sequences. G4s have been reported to play significant roles in various cellular events in both macro- and micro-organisms. The identification and characterization of G4s can help to understand their different biological roles and potential applications in diagnosis and therapy. In addition to biophysical and biochemical methods to interrogate G4 formation, G4 fluorescent turn-on ligands can be used to target and visualize G4 formation both in vitro and in cells. Here, we review several representative classes of G4 fluorescent turn-on ligands in terms of their interaction mechanism and application perspectives. Interestingly, G4 structures are commonly identified in DNA and RNA aptamers against targets that include proteins and small molecules, which can be utilized as G4 tools for diverse applications. We therefore also summarize the recent development of G4-containing aptamers and highlight their applications in biosensing, bioimaging, and therapy. Moreover, we discuss the current challenges and future perspectives of G4 fluorescent turn-on ligands and G4-containing aptamers.

G-Quadruplexes as An Alternative Recognition Element in Disease-Related Target Sensing

G-quadruplexes are made up of guanine-rich RNA and DNA sequences capable of forming noncanonical nucleic acid secondary structures. The base-specific sterical configuration of G-quadruplexes allows the stacked G-tetrads to bind certain planar molecules like hemin (iron (III)-protoporphyrin IX) to regulate enzymatic-like functions such as peroxidase-mimicking activity, hence the use of the term DNAzyme/RNAzyme. This ability has been widely touted as a suitable substitute to conventional enzymatic reporter systems in diagnostics. This review will provide a brief overview of the G-quadruplex architecture as well as the many forms of reporter systems ranging from absorbance to luminescence readouts in various platforms. Furthermore, some challenges and improvements that have been introduced to improve the application of G-quadruplex in diagnostics will be highlighted. As the field of diagnostics has evolved to apply different detection systems, the need for alternative reporter systems such as G-quadruplexes is also paramount.

Comparison of turn-on and ratiometric fluorescent G-quadruplex aptasensor approaches for the detection of ATP

Two fluorescent aptasensor methods were developed for the detection of ATP in biochemical systems. The first method consisted of a label-free fluorescent "turn-on" approach using a guanine-rich ATP aptamer sequence and the DNA-binding agent berberine complex. In the presence of ATP, the ATP preferentially binds with its aptamer and conformationally changes into a G-quadruplex structure. The association of berberine with the G-quadruplex results in the enhancement of the fluorescence signal of the former. The detection limit of ATP was found to be 3.5 μM. Fluorescence, circular dichroism and melting temperature (T_m) experiments were carried out to confirm the binding specificity and structural changes. The second method employs the ratiometric fluorescent approach based on the Forster resonance energy transfer (FRET) for the detection of ATP using berberine along with a quencher (AuNRs, AgNPs) and a fluorophore (red quantum dots (RQDs), carbon dots (CDs)) labeled at 5' and 3' termini of the ATP-binding aptamer sequence. Upon addition of ATP and berberine, ATP specifically binds with its aptamer leading to the formation of G-quadruplex, and similarly, berberine also binds to the G-quadruplex. This leads to an enhancement of fluorescence of berberine while that of RQD and CDs were significantly quenched via FRET. The respective detection limits calculated were 3.6 μM and 3.8 μM, indicating these fluorescent aptasensor methods may be used for a wide variety of small molecules. Graphical abstract.

A new tetraphenylethylene based AIE sensor with light-up and tunable measuring range for adenosine triphosphate in aqueous solution and in living cells

An AIE based tetraphenylethylene derivative (TPPTPE) was synthesized for light-up sensing of ATP in aqueous solution. The measuring range for ATP can be tuned by varying the concentration of the TPPTPE. A one-step straightforward quantitative analysis of the ATP level in cell lysates can be realized using the TPPTPE. Moreover, the TPPTPE can be used for monitoring apyrase activity in aqueous solution and detecting ATP both in living cancer cell lines and in living normal cell lines.

An engineered one-site aptamer with higher sensitivity for label-free detection of adenosine on graphene oxide

The 27-nucleotide DNA aptamer for adenosine and ATP, originally selected by the Szostak lab in 1995, has been a very popular model system for biosensor development. This unique aptamer has two target binding sites, and we recently showed that it is possible to remove either site while the other one still retains binding. From an analytical perspective, tuning the number of binding sites has important implications in modulating sensitivity of the resulting biosensors. In this work, we report that the engineered one-site aptamer showed excellent signaling properties with a 2.6-fold stronger signal intensity and also a 4.2-fold increased detection limit compared with the wild-type two-site aptamer. The aptamer has a hairpin structure, and the length of the hairpin stem was systematically varied for the one-site aptamers. Isothermal titration calorimetry and a label-free fluorescence signaling method with graphene oxide and SYBR Green I were respectively used to evaluate binding and sensor performance. Although longer stemmed aptamers produced better adenosine binding affinity, the signaling was quite independent of the stem length as long as more than three base pairs were left. This was explained by the higher affinity of binding to GO by the longer aptamers, cancelling out the higher affinity for adenosine binding. This work further confirms the analytical applications of such one-site adenosine aptamers, which are potentially useful for improved ATP imaging and for developing new biosensors.

Hairpin-shaped DNA Templated Copper Nanoparticles for Fluorescence Detection of Adenosine Triphosphate Based on Ligation-mediated Exonuclease Cleavage

DNA-templated copper nanoparticles (CuNPs) have recently received considerable interest as functional fluorescent probes for biochemical analysis. In this work, a novel ATP-dependent ligation reactions (ATP-DLR) based ATP assay strategy was proposed by using hairpin-shaped (HS) DNA templated CuNPs as a fluorescent probe. Nick sealing by T4 DNA ligase leads to the formation of intact HS DNA, which can resist the exonuclease cleavage and be taken as the template for CuNPs formation, resulting in strong fluorescence. The proposed ATP detection is label free, sensitive and highly selective, and it has good linearity from 0.02 to 4 μM and a detection limit of 7 nM. This strategy is expected to promote the exploitation and application of DNA-templated CuNPs in biochemical and biomedical studies, and holds great promise in fluorescence detection for other ligation-related biomolecules.

Simultaneous Detection of Adenosine Triphosphate and Glucose Based on the Cu-Fenton Reaction

Both adenosine triphosphate (ATP) and glucose are important to human health, and their abnormal levels are closely related to angiocardiopathy and hypoglycaemia. Therefore, the simultaneous determination of ATP and glucose with a single test mode is highly desirable for disease diagnostics and early recognition. Herein, a new fluorescence on/off switch sensing platform is developed by carbon nanodots (CNDs) to detect ATP and glucose simultaneously. The fluorescence of CNDs can be quenched by Cu²⁺ and hydrogen peroxide (H₂O₂), due to the formation of hydroxyl radicals (·OH) produced in the Cu-Fenton reaction. Based on the high affinity of Cu²⁺ with ATP, the fluorescence of CNDs will recover effectively after adding ATP. Additionally, glucose can be efficiently catalyzed by glucose oxidase (GOx) to generate H₂O₂, so the platform can also be utilized to analyze glucose. Under optimum conditions, this sensing platform displays excellent sensitivity and the linear ranges are from 0.1 to 7 μM for ATP with a limit of detection (LOD) of 30.2 nM, and from 0.1 to 7 mM for glucose with a LOD 39.8 μM, respectively. Benefiting from the high sensitivity and selectivity, this sensing platform is successfully applied for simultaneous detection of ATP and glucose in human serum samples with satisfactory recoveries.

Evaluation of the effect of polymorphism on G-quadruplex-ligand interaction by means of spectroscopic and chromatographic techniques

Guanine-rich sequences may fold into highly ordered structures known as G-quadruplexes. Apart from the monomeric G-quadruplex, these sequences may form multimeric structures that are not usually considered when studying interaction with ligands. This work studies the interaction of a ligand, crystal violet, with three guanine-rich DNA sequences with the capacity to form multimeric structures. These sequences correspond to short stretches found near the promoter regions of c-kit and SMARCA4 genes. Instrumental techniques (circular dichroism, molecular fluorescence, size-exclusion chromatography and electrospray ionization mass spectrometry) and multivariate data analysis were used for this purpose. The polymorphism of G-quadruplexes was characterized prior to the interaction studies. The ligand was shown to interact preferentially with the monomeric G-quadruplex; the binding stoichiometry was 1:1 and the binding constant was in the order of 10⁵M^-1 for all three sequences. The results highlight the importance of DNA treatment prior to interaction studies.

A new conjugated polymer-based combination probe for ATP detection using a multisite-binding and FRET strategy

A new conjugated polymer-based ratiometric combination probe was constructed for adenosine triphosphate detection by taking advantage of a multisite-binding and fluorescence resonance energy transfer strategy. The method is rapid and highly selective, which can clearly discriminate ATP from persistent interferents such as ADP, AMP, other nucleoside polyphosphates and nucleobases.

Environment dependent enhanced photoluminescence and Boolean logic gates like behavior of Bi2O3 and Ag:Bi2O3 nanostructures

In the evolution of nanotechnology research for smart and precise sensor fabrication, here we report the implementation of simple logic gate operations performing by luminescent nanostructures in biomolecule environment based on photoluminescence (PL) technique. This present work deals with the luminescence property of α-Bi₂O₃ and Ag modified α-Bi₂O₃ nanostructures for d-glucose and Bovine serum albumin (BSA) sensing applications. These nanostructures are prepared by simple co-precipitation method and their morphology are examined using transmission electron microscope (TEM). We explore the PL characteristics of the prepared nanostructures and observe their change in PL intensity in the presence of d-glucose and BSA molecules. Enhancement in PL intensity is observed in the presence of d-glucose and BSA. Based on the PL response of prepared nanostructures in the biomolecule environment, we demonstrate biophotonic logic gates including YES, PASS 0, OR and INHIBIT gates.

Selection and characterization of a DNA aptamer to crystal violet

A shortened 42-mer aptamer with high affinity and good specificity for crystal violet, which showed higher fluorescence enhancement than G-quadruplexes was successfully selected.

In Silico Screening and Binding Characterization of Small Molecules toward a G-Quadruplex Structure Formed in the Promoter Region of c-MYC Oncogene

Overexpression of c-MYC oncogene is associated with cancer pathology. Expression of c-MYC is regulated by the G-quadruplex structure formed in the G-rich segment of nuclease hypersensitive element (NHE III₁), that is, "Pu27", which is localized in the promoter region. Ligand-induced stabilization of the Pu27 structure has been identified as a novel target for cancer therapeutics. Here, we have explored the library of synthetic compounds against the predefined binding site of Pu27. Three compounds were selected based on the docking analyses; they were further scrutinized using all atom molecular dynamics simulations in an explicit water model. Simulated trajectories were scrutinized for conformational stability and ligand binding free energy estimation; essential dynamic behavior was determined using principal component analysis. One of the molecules, "TPP (1-(3-(4-(1,2,3-thiadiazol-4-yl)phenoxy)-2-hydroxypropyl)-4-carbamoylpiperidinium)", with the best results was considered for further evaluation. The theoretical observations are supported well by biophysical analysis using circular dichroism, isothermal titration calorimetry, and high-resolution NMR spectroscopy indicating association of TPP with Pu27. The in vitro studies were then translated into c-MYC overexpression in the T47D breast cancer cell line. Biological evaluation through the MTT assay, flow cytometric assay, RT-PCR, and reporter luciferase assay suggests that TPP downregulates the expression of c-MYC oncogene by arresting its promoter region. In silico and in vitro observations cumulatively suggest that the novel skeleton of TPP could be a potential anticancer agent by stabilizing the G-quadruplex formed in the Pu27 and consequently downregulating the expression of c-MYC oncogene. Derivation of new molecules on its skeleton may confer anticancer therapeutics for the next generation.

Water-Soluble Conjugated Polymer as a Fluorescent Probe for Monitoring Adenosine Triphosphate Level Fluctuation in Cell Membranes during Cell Apoptosis and in Vivo

Adenosine triphosphate (ATP) is used as the energy source in cells and plays crucial roles in various cellular events. The cellular membrane is the protective barrier for the cytoplasm of living cells and involved in many essential biological processes. Many fluorescent probes for ATP have been successfully developed, but few of these probes were appropriate for visualizing ATP level fluctuation in cell membranes during the apoptotic cell death process. Herein, we report the synthesis of a new water-soluble cationic polythiophene derivative that can be utilized as a fluorescent sensor for detecting ATP in cell membranes. Poly((3-((4-methylthiophen-3-yl)oxy)propyl)triphenylphosphonium chloride) (PMTPP) exhibits high sensitivity and good selectivity to ATP, and the detection limit is 27 nM. The polymer shows low toxicity to live cells and excellent photostability in cell membranes. PMTPP was practically utilized for real-time monitoring of ATP levels in the cell membrane through fluorescence microscopy. We have demonstrated that the ATP levels in cell membranes increased during the apoptotic cell death process. The probe was also capable of imaging ATP levels in living mice.

Selection and characterization of dimethylindole red DNA aptamers for the development of light-up fluorescent probes

To develop novel label-free light-up probes with improved performance characteristics and low background, we selected DNA aptamers for dimethylindole red (DIR) by a modified affinity chromatography based SELEX method. DIR is an anionic propylsulfonate substituted red-emitting dye derivative of thiazole orange and exhibited weak fluorescence in fluid solution and in the presence of dsDNA. After 14 rounds of selection, a shortened 42-mer DNA aptamer with sub-micromolar dissociation constant (K_d=0.65±0.17μM) was selected. The fluorescent intensity of DIR was dramatically enhanced in the presence of the specific aptamer. The aptamer gave a 140-fold fluorescence enhancement in a saturated concentration. The DIR-aptamer pair could be potentially used as novel light-up fluorescent probe to construct sensors for various applications.

Label-free and rapid detection of ATP based on structure switching of aptamers

In this work, an aptamer-based fluorescent strategy for label-free detection of ATP was developed by using Thioflavin T (ThT) as a fluorescence indicator, which can specifically bind with G-quadruplex DNAs to generate enhanced fluorescence intensity. In the absence of ATP, the folded structure of ATP aptamer allows the intercalation of ThT to produce strong fluorescence signal. However, upon ATP binding to the aptamer where ThT intercalated, the conformational change or distortion of the aptamer is large enough to cause much less intercalation of ThT and consequently drastic suppression of the fluorescence intensity. As such, the concentration of ATP could be identified very easily by observing fluorescence changes of this sensing system. This label-free assay could be accomplished very easily and quickly with a "mix-and-detect" detection method and exhibits high sensitivity to ATP with a detection limit of 33 nM in a wide range of 0.1-1000 μM. Furthermore, this proposed method is capable of detecting ATP in human serum and cell extracts. This method offers several advantages such as simplicity, rapidity, low cost, good stability and excellent selectivity, which make it hold great potential for the detection of ATP in bioanalytical and biological studies.

Self-Assembled Tb3+ Complex Probe for Quantitative Analysis of ATP during Its Enzymatic Hydrolysis via Time-Resolved Luminescence in Vitro and in Vivo

To more accurately assess the pathways of biological systems, a probe is needed that may respond selectively to adenosine triphosphate (ATP) for both in vitro and in vivo detection modes. We have developed a luminescence probe that can provide real-time information on the extent of ATP, ADP, and AMP by virtue of the luminescence and luminescence lifetime observed from a supramolecular polymer based on a C₃ symmetrical terpyridine complex with Tb³⁺ (S1-Tb). The probe shows remarkable selective luminescence enhancement in the presence of ATP compared to other phosphate-displaying nucleotides including adenosine diphosphate (ADP), adenosine monophosphate (AMP), guanosine triphosphate (GTP), thymidine triphosphate (TTP), H₂PO₄^- (Pi), and pyrophosphate (PPi). In addition, the time-resolved luminescence lifetime and luminescence spectrum of S1-Tb could facilitate the quantitative measurement of the exact amount of ATP and similarly ADP and AMP within living cells. The time-resolved luminescence lifetime of S1-Tb could also be used to quantitatively monitor the amount of ATP, ADP, and AMP in vitro following the enzymatic hydrolysis of ATP. The long luminescence lifetime, which was observed into the millisecond range, makes this S1-Tb-based probe particularly attractive for monitoring biological ATP levels in vivo, because any short lifetime background fluorescence arising from the complex molecular environment may be easily eliminated.

Aggregation-Induced Energy Transfer of Conjugated Polymer Materials for ATP Sensing

Water-soluble conjugated polymers are attractive fluorescent materials for applications in chemical and biological sensing. The molecular wire effect of such polymers amplifies changes in the fluorescence signal, which can be used for detecting various analytes with high sensitivity. In this work, we report an efficient ratiometric fluorescent probe based on a water-soluble conjugated polymer that showed high sensitivity and selectivity toward adenosine 5'-triphosphate (ATP). The macromolecular probe consisted of a polyfluorene backbone doped with 5 mol % 1,4-dithienylbenzothiadiazole (DBT) modified by bis-imidazolium and oligo(ethylene glycol) moieties. Solutions of the polymer emitted purple fluorescence, which changed to red upon addition of ATP molecules. The addition of ATP caused the polymer to aggregate, which enhanced fluorescence resonance energy transfer efficiency from the fluorene segments to DBT units, leading to an increase in red emission. The ratio of the fluorescence at these different wavelengths (I₆₅₅/I₄₂₃) showed a strong dependence on the ATP concentration. PF-DBT-BIMEG also exhibited high selectivity for ATP sensing over other representative anions and discriminated it from adenosine 5'-diphosphate (ADP) and adenosine 5'-monophosphate (AMP). This can be explained by the much stronger electrostatic interactions between the polymer and ATP than the interactions between the polymer and ADP or AMP, as confirmed through molecular dynamics simulations.

An Aldol Reaction-Based Iridium(III) Chemosensor for the Visualization of Proline in Living Cells

A long-lived aldol reaction-based iridium(III) chemosensor [Ir(ppy)2(5-CHOphen)]PF6 (1, where ppy = 2-phenylpyridine and 5-CHOphen = 1,10-phenanthroline-5-carbaldehyde) for proline detection has been synthesized. The iridium(III) complex 1, incorporating an aldehyde group in N^N donor ligand, can take part in aldol reaction with acetone mediated by proline. The transformation of the sp2-hybridized carbonyl group into a sp3-hybridized alcohol group influences the metal-to-ligand charge-transfer (MLCT) state of the iridium(III) complex, resulting in a change in luminescence in response to proline. The interaction of the iridium(III) complex 1 with proline was investigated by 1H NMR, HRMS and emission titration experiments. Upon the addition of proline to a solution of iridium(III) complex 1, a maximum 8-fold luminescence enhancement was observed. The luminescence signal of iridium(III) complex 1 could be recognized in strongly fluorescent media using time-resolved emission spectroscopy (TRES). The detection of proline in living cells was also demonstrated.

Visual and Plasmon Resonance Absorption Sensor for Adenosine Triphosphate Based on the High Affinity between Phosphate and Zr(IV)

Zr(IV) can form phosphate and Zr(IV) (-PO₃^2--Zr⁴⁺-) complex owing to the high affinity between Zr(IV) with phosphate. Zr(IV) can induce the aggregation of gold nanoparticles (AuNPs), while adenosine triphosphate(ATP) can prevent Zr(IV)-induced aggregation of AuNPs. Herein, a visual and plasmon resonance absorption (PRA)sensor for ATP have been developed using AuNPs based on the high affinity between Zr(IV)with ATP. AuNPs get aggregated in the presence of certain concentrations of Zr(IV). After the addition of ATP, ATP reacts with Zr(IV) and prevents AuNPs from aggregation, enabling the detection of ATP. Because of the fast interaction of ATP with Zr(IV), ATP can be detected with a detection limit of 0.5 μM within 2 min by the naked eye. Moreover, ATP can be detected by the PRA technique with higher sensitivity. The A_520nm/A_650nm values in PRA spectra increase linearly with the concentrations of ATP from 0.1 μM to 15 μM (r = 0.9945) with a detection limit of 28 nM. The proposed visual and PRA sensor exhibit good selectivity against adenosine, adenosine monophosphate, guanosine triphosphate, cytidine triphosphate and uridine triphosphate. The recoveries for the analysis of ATP in synthetic samples range from 95.3% to 102.0%. Therefore, the proposed novel sensor for ATP is promising for real-time or on-site detection of ATP.

Sequence-Specific Biosensing of DNA Target through Relay PCR with Small-Molecule Fluorophore

Polymerase chain reaction coupled with signal generation offers sensitive recognition of target DNA sequence; however, these procedures require fluorophore-labeled oligonucleotide probes and high-tech equipment to achieve high specificity. Therefore, intensive research has been conducted to develop reliable, convenient, and economical DNA detection methods. The relay PCR described here is the first sequence-specific detection method using a small-molecule fluorophore as a sensor and combines the classic 5'-3' exonuclease activity of Taq polymerase with an RNA mimic of GFP to build a label-free DNA detection platform. Primarily, Taq polymerase cleaves the 5' noncomplementary overhang of the target specific probe during extension of the leading primer to release a relay oligo to initiate tandem PCR of the reporting template, which encodes the sequence of RNA aptamer. Afterward, the PCR product is transcribed to mRNA, which could generate a fluorescent signal in the presence of corresponding fluorophore. In addition to high sensitivity and specificity, the flexibility of choosing different fluorescent reporting signals makes this method versatile in either single or multiple target detection.

Lysosomal ATP imaging in living cells by a water-soluble cationic polythiophene derivative

Lysosomes in astrocytes and microglia can release ATP as the signaling molecule for the cells through ca(2+)-dependent exocytosis in response to various stimuli. At present, fluorescent probes that can detect ATP in lysosomes have not been reported. In this work, we have developed a new water-soluble cationic polythiophene derivative that can be specifically localized in lysosomes and can be utilized as a fluorescent probe to sense ATP in cells. PEMTEI exhibits high selectivity and sensitivity to ATP at physiological pH values and the detection limit of ATP is as low as 10(-11)M. The probe has low cytotoxicity, good permeability and high photostability in living cells and has been applied successfully to real-time monitoring of the change in concentrations of ATP in lysosomes though fluorescence microscopy. We also demonstrated that lysosomes in Hela cells can release ATP through Ca(2+)-dependent exocytosis in response to drug stimuli.

A G-quadruplex-based Label-free Fluorometric Aptasensor for Adenosine Triphosphate Detection

A G-quadruplex-based, label-free fluorescence assay was demonstrated for the detection of adenosine triphosphate (ATP). A double-stranded DNA (dsDNA), hybridized by ATP-aptamer and its complementary sequence, was employed as a substrate for ATP binding. SYBR Green I (SG I) was a fluorescent probe and exonuclease III (Exo III) was a nuclease to digest the dsDNA. Consequently, in the absence of ATP, the dsDNA was inset with SG I and was digested by Exo III, resulting in a low background signal. In the presence of ATP, the aptamer in dsDNA folded into a G-quadruplex structure that resisted the digestion of Exo III. SG I was inserted into the structure, showing high fluorescence. Owing to a decrease of the background noise, a high signal-to-noise ratio could be obtained. This sensor can detect ATP with a concentration ranging from 50 μM to 5 mM, and possesses a capacity for the sensitive determination of other targets.

Responsive hairpin DNA aptamer switch to program the strand displacement reaction for the enhanced electrochemical assay of ATP

A responsive hairpin DNA aptamer switch was ingeniously designed for enzyme-free, sensitive and selective electrochemical detection of ATP. It takes full advantage of the target-triggered liberation effect of the toehold region and the concomitant proximity effect with the branch-migration region to execute the toehold-mediated strand displacement reaction on the electrode surface.

An exonuclease I-based label-free fluorometric aptasensor for adenosine triphosphate (ATP) detection with a wide concentration range

A novel aptamer-based label-free assay for sensitive and selective detection of ATP was developed. This assay employs a new aptamer/fluorescent probe system that shows resistance to exonuclease I (Exo I) digestion upon binding to ATP molecules. In the absence of ATP, the complex between the ATP-binding aptamer (ATP-aptamer) and a DNA binding dye, berberine, is digested upon the addition of exonuclease I, leading to the release of berberine into solution and consequently, quenched berberine fluorescence. In the presence of ATP, the ATP-binding aptamer folds into a G-quadruplex structure that is resistant to Exo I digestion. Accordingly, berberine is protected in the G-quadruplex structure and high fluorescence intensity is observed. As such, based on the fluorescence signal change, a label-free fluorescence assay for ATP was developed. Factors affecting the analysis of ATP including the concentration of ATP-binding aptamer, reaction time, temperature and the concentration of Exo I were comprehensively investigated. Under optimal conditions, the fluorescence intensity of the sensing system displayed a response for ATP in a wide range up to 17.5 mM with a detection limit of 140 nM.

An indirect competitive fluorescence assay for ochratoxin A based on molecular beacon

A novel, simple and efficient method based on molecular beacon probe was developed to detect ochratoxin A.

A gold(i)–pyrazolato complex as a switch-on luminescent probe for cysteine: in situ formation of fluorescent nanoparticles and rose-like microspheres

A gold(i)–pyrazolato complex has been designed as a luminescent probe for cysteine (Cys).

Selection and analysis of DNA aptamers to berberine to develop a label-free light-up fluorescent probe

Three DNA aptamers for berberine were successfully selected and the final shortened 21-mer aptamer showed higher fluorescence enhancement than G-quadruplexes.

Quencher-free molecular aptamer beacons (QF-MABs) for detection of ATP

We have constructed a simple and efficient system-based on quencher-free molecular aptamer beacons (QF-MABs)-for probing ATP. In the absence of ATP, the fluorescence of a pyrene fluorophore on the loop position (15 nucleotides from the 5' end) of the optimal QF-MAB was quenched by the neighboring nucleobases; in its presence, fluorescence was recovered, due to a conformational change in the secondary structure of the QF-MAB.

Versatile G-quadruplex-mediated strategies in label-free biosensors and logic systems

This review addresses how G-quadruplex (G4)-mediated biosensors convert the events of target recognition into a measurable physical signal. The application of label-free G4-strategies in the construction of logic systems is also discussed.

Multiple amplification detection of microRNA based on the host–guest interaction between β-cyclodextrin polymer and pyrene

The proposed multiple amplification strategy based on the host–guest interaction between β-CDP and pyrene is homogeneous, sensitive and rapid.

A G-triplex luminescent switch-on probe for the detection of mung bean nuclease activity

A G-triplex luminescent switch-on probe for the detection of nuclease activity.

G-quadruplex-based logic gates for HgII and AgI ions employing a luminescent iridium(iii) complex and extension of metal-mediated base pairs by polymerase

We report herein the synthesis of a series of cyclometallated iridium(iii) complexes as luminescent G-quadruplex-selective probes to construct AND, OR and INHIBIT logic gates for the detection of Hg^II and Ag^I ions.

Turning an aptamer into a light-switch probe with a single bioconjugation

We describe a method for transforming a structure-switching aptamer into a luminescent light-switch probe via a single conjugation. The methodology is demonstrated using a known aptamer for Hg²⁺ as a case study. This approach utilizes a lanthanide-based metallointercalator, Eu-DOTA-Phen, whose luminescence is quenched almost entirely and selectively by purines, but not at all by pyrimidines. This complex, therefore, does not luminesce while intercalated in dsDNA, but it is bright red when conjugated to a ssDNA that is terminated by several pyrimidines. In its design, the light-switch probe incorporates a structure-switching aptamer partially hybridized to its complementary strand. The lanthanide complex is conjugated to either strand via a stable amide bond. Binding of the analyte by the structure-switching aptamer releases the complementary strand. This release precludes intercalation of the intercalator in dsDNA, which switches on its luminescence. The resulting probe turns on 21-fold upon binding to its analyte. Moreover, the structure switching aptamer is highly selective, and the long luminescence lifetime of the probe readily enables time-gating experiments for removal of the background autofluorescence of the sample.

A fluorescent aptasensor for potassium ion detection-based triple-helix molecular switch

Here, a biosensor based on a quadruplex-forming aptamer for the determination of potassium ion (K(+)) is presented. The aptamer was used as a molecular recognition element; it was adjacent to two arm fragments and a dual-labeled oligonucleotide serving as a signal transduction probe (STP) that is complementary of the arm fragment sequence. In the presence of K(+), the aptamer was displaced from the STP, which was accompanied by decreased signal. The quenching percentage of fluorescence intensity was proportional to the concentration of K(+) in the range of 0.05 to 1.4mM. A detection limit of 0.014 mM was achieved. Furthermore, other metal ions, such as Na(+), Li(+), NH4(+), Mg(2+), and Ca(2+), caused no notable interference on the detection of K(+).

An oligonucleotide-based label-free luminescent switch-on probe for RNA detection utilizing a G-quadruplex-selective iridium(III) complex

We report herein the synthesis and application of a novel G-quadruplex-selective luminescent iridium(iii) complex for the construction of an oligonucleotide-based, label-free, rapid and convenient luminescent RNA detection platform.