Two-photon fluorescent probe for cadmium imaging in cells

Near-infrared fluorescent probe to track Cys in plant roots under heavy metal hazards and its application in cells and zebrafish

Heavy metals, including Hg2+, Cr6+ and Cd2+, have always been a major issue in environmental pollution, leading to abnormal changes in the levels of biologically active molecules including Cys in plants, seriously affecting all aspects of the growth and development of plants. This makes it essential to develop a simple and practical method to study the potential impact of heavy metals on plants. In this paper, our research group has developed near-infrared fluorescent probe WRM-S, which has the advantages of fast response, sensitivity to Cys, and successfully applying it to cells and zebrafish. Moreover, it combined the close relationship between heavy metal stress on plants and Cys, using Cys as the detection target, monitoring the internal environment changes of two plants under Hg2+, Cr6+, and Cd2+ stress in the environment, and then conducting 3D imaging. The results indicated that the probe has strong penetration ability in plant tissues, and revealed abnormal changes in plant Cys levels caused by heavy metal stress-induced cellular oxidative stress or cytotoxicity. Thus, the in-situ imaging detection of this probe provides a direction for the physiological dynamics research of plant environmental stress.

Bi-component sensing platform for the detection of Cd2+, Fe2+and Fe3+ ions

The ability of N-(1,3-dioxo-1H-benzo[de]isoquinolin-2(3H)-yl)isonicotinamide (naphydrazide) or 2,6-pyridinedicarboxylic acid (2,6-H2pdc) individually or as a bi-component system in distinguishing and detecting Fe3+ or Fe2+ and Cd2+ ions was investigated. The use of these molecules as single or bi-component analytes in absorption or emission spectroscopy studies showed that under specific conditions each had their own merits for specific purposes. UV-visible spectroscopic studies of 2,6-H2pdc for assessing the interactions with ferrous and ferric ions showed characteristic distinctions. The detection limit for Fe3+ analysed through UV-visible spectroscopy using naphydrazide was 0.46 μM, whereas it was 1.28 μM using 2,6-H2pdc. Naphydrazide together with Fe3+ allowed distinguishing Cd2+ ions from Zn2+ and Fe2+ ions. The bi-component system was useful for the selective detection of Cd2+ ions using fluorescence spectroscopy, with a detection limit for Cd2+ ions of 18.31 μM. The presence of Fe2+ and Cd2+ ions in a solution of the bi-component had resulted white-light emission. An analogous compound N,N'-(1,3,6,8-tetraoxobenzo[lmn][3,8]phenanthroline-2,7(1H,3H,6H,8H)-diyl)diisonicotinamide (binaphydrazide) was found unsuitable for such detections. Two 2,6-pyridinedicarboxylate Fe3+ complexes possessing protonated naphydrazide or binaphydrazide were prepared and characterised. These complexes were also found unsuitable for the detection of the said ions in solution. Electrochemical studies with the bi-component system showed that cyclic voltammograms could distinguish Fe3+ or Fe2+ from Cd2+ ions.

Ion-Imprinted Polymer-Based Sensor for the Detection of Mercury Ions

In this work, the development of a novel method for the detection of mercury (II) ions in wastewater using a mercury ion-imprinted polymer (IIP) combined with a quartz crystal microbalance (QCM) is described. The IIP was successfully synthesized via the polymerization of a of a novel fluorescein- and 2-aminophenol-functionalized methacrylic acid monomer, which was noted to have high binding affinity to mercury (II) ions. This polymer was subsequently coated on a QCM chip to create an IIP-QCM sensor. This sensor was established to have high selectivity and good sensitivity to mercury (II) ions, and had a limit of detection (LOD) of 14.17 ppb, a limit of quantification (LOQ) of 42.94 ppb, a signal-to-noise ratio (S/N) of 4.29, good repeatability, and a working range of 42.94 ppb to 2 ppm. The sensor was also able to analyze tap water and wastewater samples. The IIP-QCM is, therefore, promising as a highly selective, cost-effective, and rapid mercury ion sensor for applications involving the detection of mercury in wastewater.

Recent Progress in Fluorescent Probes For Metal Ion Detection

All forms of life have absolute request for metal elements, because metal elements are instrumental in various fundamental processes. Fluorescent probes have been widely used due to their ease of operation, good selectivity, high spatial and temporal resolution, and high sensitivity. In this paper, the research progress of various metal ion (Fe3+,Fe2+,Cu2+,Zn2+,Hg2+,Pb2+,Cd2+) fluorescent probes in recent years has been reviewed, and the fluorescence probes prepared with different structures and materials in different environments are introduced. It is of great significance to improve the sensing performance on metal ions. This research has a wide prospect in the application fields of fluorescence sensing, quantitative analysis, biomedicine and so on. This paper discusses about the development and applications of metal fluorescent probes in future.

Optically superior fluorescent probes for selective imaging of cells, tumors, and reactive chemical species

Fluorescent chemical probes have become powerful tools to study biological events in living cells. They provide a great opportunity to quantitatively and qualitatively analyze the physiological and biochemical properties of living cells in real time. The ability of researchers to manipulate these probes for a desired specific purpose has turned many heads in the scientific community. Despite a slow start, fluorescent probe research has seen exponential growth over the last decade in the world. This change required some adventurous and creative scientists from different fields-like biology, medicine, and chemistry-to come together to facilitate the constant expansion of this field. This review article introduces some fundamental concepts related to fluorescent probe designing and development. It also summarizes various fluorescent probes with superior optical properties used in fields like cell biology, cellular imaging, medical research, and cancer diagnosis. It is hoped that this article will encourage more young and creative scientists to contribute their talents to this field.

A Six-Armed Phenhomazine Ligand with a Potential "Turn-Off" Copper(II) Sensing Capability through Terbium(III) Luminescence Quenching

Herein, the design, synthesis, and characterization of a phenhomazine ligand are described. The ligand has six pendant acetate arms designed for the combined coordination of copper(II) and lanthanide(III) ions, with the perspective of developing a "turn-off" copper sensor. The key step for the ligand preparation was the one-step endomethylene bridge fission of a diamino Tröger's base with a concomitant alkylation. Fluorescence and absorption spectroscopies as well as nuclear magnetic resonance (NMR) experiments were performed to analyze and understand the coordination properties of the ligand. Transition metal coordination was driven by the synergistic effect of the free nitrogen atoms of the diazocinic core and the two central acetate arms attached to those nitrogen atoms, whereas lanthanide coordination is performed by the external acetate arms, presumably forming a self-assembled 2:2 metallosupramolecular structure. The terbium complex shows the typical green emission with narrow bands and long luminescence lifetimes. The luminescence quenching produced by the presence of copper(II) ions was analyzed. This work sets, therefore, a starting point for the development of a phenhomazine-based "turn-off" copper(II) sensor.

A Fluorescent Kinase Inhibitor that Exhibits Diagnostic Changes in Emission upon Binding

The development of a fluorescent LCK inhibitor that exhibits favourable solvatochromic properties upon binding the kinase is described. Fluorescent properties were realised through the inclusion of a prodan-derived fluorophore into the pharmacophore of an ATP-competitive kinase inhibitor. Fluorescence titration experiments demonstrate the solvatochromic properties of the inhibitor, in which dramatic increase in emission intensity and hypsochromic shift in emission maxima are clearly observed upon binding LCK. Microscopy experiments in cellular contexts together with flow cytometry show that the fluorescence intensity of the inhibitor correlates with the LCK concentration. Furthermore, multiphoton microscopy experiments demonstrate both the rapid cellular uptake of the inhibitor and that the two-photon cross section of the inhibitor is amenable for excitation at 700 nm.

Dansyl-appended CuII-complex-based nitroxyl (HNO) sensing with living cell imaging application and DFT studies

We introduce herein, a novel copper complex-based fluorescent probe[Cu^II(DQ₄₆₈)Cl]⁺that exhibits a significant fluorescence turn-on response towards nitroxyl with high selectivity over other biological reactive oxygen, nitrogen and sulfur species, including nitric oxide.

Mitochondrial Morphology and Function of the Pancreatic β-Cells INS-1 Model upon Chronic Exposure to Sub-Lethal Cadmium Doses

The impact of chronic cadmium exposure and slow accumulation on the occurrence and development of diabetes is controversial for human populations. Islets of Langerhans play a prominent role in the etiology of the disease, including by their ability to secrete insulin. Conversion of glucose increase into insulin secretion involves mitochondria. A rat model of pancreatic β-cells was exposed to largely sub-lethal levels of cadmium cations applied for the longest possible time. Cadmium entered cells at concentrations far below those inducing cell death and accumulated by factors reaching several hundred folds the basal level. The mitochondria reorganized in response to the challenge by favoring fission as measured by increased circularity at cadmium levels already ten-fold below the median lethal dose. However, the energy charge and respiratory flux devoted to adenosine triphosphate synthesis were only affected at the onset of cellular death. The present data indicate that mitochondria participate in the adaptation of β-cells to even a moderate cadmium burden without losing functionality, but their impairment in the long run may contribute to cellular dysfunction, when viability and β-cells mass are affected as observed in diabetes.

A highly selective and sensitive fluorescent chemosensor for distinguishing cadmium(ii) from zinc(ii) based on amide tautomerization

A naphthalimide-derived fluorescent sensor termed L2 was designed and synthesized.

A two-photon fluorescent probe for nitroreductase imaging in living cells, tissues and zebrafish under hypoxia conditions

A two-photon fluorescent probe FNTR, constructed for nitroreductase by using a fluorine derivative as a TP fluorophore and a p-nitrobenzyl carbamate group as a recognition domain, was successfully applied to detect endogenous NTR in living cells, tissues and zebrafish.

A selective fluorescent probe for the detection of Cd2+ in different buffer solutions and water

A fluorescent probe NHQ, which exhibited excellent selectivity toward Cd²⁺ in different buffer solutions such as Tris-HCl buffer solution, HEPES buffer solution, and PBS buffer solution, and even in water, was developed.

Study on erythrosine-phen-Cd(II) systems by resonance Rayleigh scattering, absorption spectra and their analytical applications

In pH 7.0-8.0 KH2PO4-Na2HPO4 buffer solution, Cd(II) reacted with 1,10-phenanthroline to form chelate cation [Cd(phen)3]2+, which further reacted with anion of erythrosine to form ternary ion-association complex through electrostatic attraction and hydrophobic effect. This process could result in remarkable absorption spectra change and produce obvious fading reaction at 528 nm. Absorbance change (ΔA) of system was directly proportional to the concentration of Cd(II). Hereby, a highly sensitive spectrophotometric method for the determination of Cd(II) was established. The molar absorption coefficient was 2.29×10(5) L mol(-1) cm(-1) and the detection limit of Cd(II) was 26.5 ng mL(-1). Furthermore, the resonance Rayleigh scattering (RRS) of this system with two peaks located at 371 and 590 nm enhanced significantly, and second-order scattering (SOS) and frequence doubling scattering (FDS) of this system changed notably at 640 and 350 nm, respectively. Under the optimum conditions, the scattering intensities (ΔIRRS, ΔIDWO-RRS, ΔISOS and ΔIFDS) had good linear relationship with the concentration of Cd(II) in certain ranges. The detection limits of Cd(II) were 1.27 ng mL(-1), 1.39 ng mL(-1), 4.03 ng mL(-1), 5.92 ng mL(-1) and 14.7 ng mL(-1) for dual-wavelength overlapping resonance Rayleigh scattering (DWO-RRS), RRS (371 nm), RRS (590 nm), SOS and FDS, respectively. In addition, the suitable reaction conditions and effects of coexisting substances were investigated. The methods had been successfully applied to the determination of Cd(II) in environmental water samples. The recovery range was between 93.0% and 103.0% and the relative standard deviation (RSD) was between 2.5% and 4.3%. The results were in agreement with those obtained from atomic absorption spectroscopy.

Recent development of two-photon fluorescent probes for bioimaging

Fluorescent probes are essential tools for studying biological systems.

Two-photon ratiometric fluorescent sensor based on specific biomolecular recognition for selective and sensitive detection of copper ions in live cells

In this work, we develop a ratiometric two-photon fluorescent probe, ATD@QD-E2Zn2SOD (ATD = amino triphenylamine dendron, QD = CdSe/ZnSe quantum dot, E2Zn2SOD = Cu-free derivative of bovine liver copper-zinc superoxide dismutase), for imaging and sensing the changes of intracellular Cu(2+) level with clear red-to-yellow color change based on specific biomolecular recognition of E2Zn2SOD for Cu(2+) ion. The inorganic-organic nanohybrided fluorescent probe features two independent emission peaks located at 515 nm for ATD and 650 nm for QDs, respectively, under two-photon excitation at 800 nm. Upon addition of Cu(2+) ions, the red fluorescence of QDs drastically quenches, while the green emission from ATD stays constant and serves as a reference signal, thus resulting in the ratiometric detection of Cu(2+) with high accuracy by two-photon microscopy (TPM). The present probe shows high sensivity, broad linear range (10(-7)-10(-3) M), low detection limit down to ∼10 nM, and excellent selectivity over other metal ions, amino acids, and other biological species. Meanwhile, a QD-based inorganic-organic probe demonstrates long-term photostability, good cell-permeability, and low cytotoxicity. As a result, the present probe can visualize Cu(2+) changes in live cells by TPM. To the best of our knowledge, this is the first report for the development of a QD-based two-photon ratiometric fluorescence probe suitable for detection of Cu(2+) in live cells.

Metal coordination in photoluminescent sensing

Coordination chemistry plays an essential role in the design of photoluminescent probes for metal ions. Metal coordination to organic dyes induces distinct optical responses which signal the presence of metal species of interest. Luminescent lanthanide (Ln(3+)) and transition metal complexes of d(6), d(8) and d(10) configurations often exhibit unique luminescence properties different from organic dyes, such as high quantum yield, large Stokes shift, long emission wavelength and emission lifetimes, low sensitivity to microenvironments, and can be explored as lumophores to construct probes for metal ions, anions and neutral species. In this review, the design principles and coordination chemistry of metal probes based on mechanisms of PeT, PCT, ESIPT, FRET, and excimer formation will be discussed in detail. Particular attention will be given to rationales for the design of turn-on and ratiometric probes. Moreover, phosphorescent probe design based on Ln(3+) and d(6), d(8) and d(10)-metal complexes are also presented via discussing certain factors affecting the phosphorescence of these metal complexes. A survey of the latest progress in photoluminescent probes for identification of essential metal cations in the human body or toxic metal cations in the environment will be presented focusing on their design rationales and sensing behaviors. Metal complex-based photoluminescent probes for biorelated anions such as PPi, and neutral biomolecules ATP, NO, and H(2)S will be discussed also in the context of their metal coordination-related sensing behaviors and design approaches.