The microemulsion electrokinetic capillary chromatography combined with reversed-electrode polarity stacking mode for enriching and quantifying lignanoids and ginsenosides in TCMs preparation Shengmai injection

An on-line large volume sample stacking with polarity switching (LVSS) method was proposed for simultaneously determining lignanoids and ginsenosides in MEEKC. The parameters including the pH value and concentration of buffer solution, SDS, organic modifier, oil phase, running voltage, and temperature as well as injection time, sample matrix, stacking voltage, and time influencing separation and stacking were systematically optimized. The method was verified by performing precision, accuracy, stability, and recovery. Its reliability was proved by separating and quantifying two lignanoids and three ginsenosides in Shengmai injectionSMI. The sensitivity of these compounds was improved by MEEKC-LVSS method for 6-11 times than conventional MEEKC. Thus, this developed on-line MEEKC-LVSS method was sensitive, practical, and reliable.

Determination of salicylic acid using a magnetic iron oxide nanoparticle-based solid-phase extraction procedure followed by an online concentration technique through micellar electrokinetic capillary chromatography

In this study, a magnetic iron oxide nanoparticle-based solid-phase extraction procedure combined with the online concentration and separation of salicylic acid (SA) through micellar electrokinetic chromatography-UV detection (MEKC-UV) was developed. Under optimal experimental conditions, a good linearity in the range of 0.01-100μmolL-1 was obtained with a coefficient of correlation of 0.9999. The detection sensitivity of the proposed method exhibited an approximately 1026-fold improvement compared with a single MEKC method without online concentration, and the detection limit (S/N=3) was 3.80nmolL-1. The repeatability of the method was evaluated using intraday and interday RSDs (11.5% and 17.0%, respectively). The method was used to determine SA concentrations in tobacco leaves (Nicotiana tabacum L. cv. Samsun) from the NN genotype, nn genotype, and Nt-NahG mutant strains, as well as in shampoo and ointment samples. Rapid extraction and separation (<50min), acceptable repeatability (RSD<17.0%), and high spiked recoveries (95.8%-102.4%) were observed for plants, detergents, and pharmaceuticals.

Microemulsion Electrokinetic Chromatography

Microemulsion electrokinetic chromatography (MEEKC) is a special mode of capillary electrophoresis employing a microemulsion as carrier electrolyte. Analytes may partition between the aqueous phase of the microemulsion and its oil droplets which act as a pseudostationary phase. The technique is well suited for the separation of neutral species, in which case charged oil droplets (obtained by addition of an anionic or cationic surfactant) are present. A single set of separation parameters may be sufficient for separation of a wide range of analytes belonging to quite different chemical classes. Fine-tuning of resolution and analysis time may be achieved by addition of organic solvents, by changes in the nature of the surfactants (and cosurfactants) used to stabilize the microemulsion, or by various additives that may undergo some additional interactions with the analytes. Besides the separation of neutral analytes (which may be the most important application area of MEEKC), it can also be employed for cationic and/or anionic species. In this chapter, MEEKC conditions are summarized that have proven their reliability for routine analysis. Furthermore, the mechanisms encountered in MEEKC allow an efficient on-capillary preconcentration of analytes, so that the problem of poor concentration sensitivity of ultraviolet absorbance detection is circumvented.

Advance of CE and CEC in phytochemical analysis (2012–2013)

This article presents an overview of the advance of CE and CEC in phytochemical analysis, based on the literature not mentioned in our previous review papers [Chen, X. J., Zhao, J., Wang, Y. T., Huang, L. Q., Li, S. P., Electrophoresis 2012, 33, 168–179], mainly covering the years 2012–2013. In this article, attention is paid to online preconcentration, rapid separation, and sensitive detection. Selected examples illustrate the applicability of CE and CEC in biomedical, pharmaceutical, environmental, and food analysis. Finally, some general conclusions and future perspectives are given.

A simple sample preparation approach based on hydrophilic solid-phase extraction coupled with liquid chromatography-tandem mass spectrometry for determination of endogenous cytokinins

Cytokinins (CKs), a vital family of phytohormones, play important roles in the regulation of shoot and root development. However, the quantification of CKs in plant samples is frequently affected by the complex plant matrix. In the current study, we developed a simple, rapid and efficient hydrophilic interaction chromatography-solid phase extraction (HILIC-SPE) method for CKs purification. CKs were extracted by acetonitrile (ACN) followed by HILIC-SPE (silica as sorbents) purification. The extraction solution of plant samples could be directly applied to HILIC-SPE without solvent evaporation step, which simplified the analysis process. Moreover, with HILIC chromatographic retention mechanism, the hydrophobic co-extracted impurities were efficiently removed. Subsequently, CKs were separated by RPLC, orthogonal to the HILIC pretreatment process, and detected by tandem mass spectrometry. The method exhibits high specificity and recovery yield (>77.0%). Good linearities were obtained for all eight CKs ranging from 0.002 to 100ngmL(-1) with correlation coefficients (r) higher than 0.9927. The limits of detection (LODs, signal/noise=5) for the CKs were between 1.0 and 12.4pgmL(-1). Reproducibility of the method was evaluated by intra-day and inter-day measurements and the results showed that relative standard deviations (RSDs) were less than 10.5%. Employing this method, we successfully quantified six CKs in 20mg Oryza sativa leaves and the method was also successfully applied to Brassica napus (flower and leaves).

Microemulsion electrokinetic chromatography for analysis of phthalates in soft drinks

Microemulsion electrokinetic chromatography (MEEKC) is proposed for analysis of di-n-butyl phthalate (DBP) and di-(2-ethylhexyl) phthalate (DEHP) in soft drinks. However, the instability of microemulsion is a critical issue. In this research, a novel material, Pluronic® F-127, which has the properties of polymer and surfactant, was added for stabilizing the microemulsion in the MEEKC system. Our data demonstrate that the presence of Pluronic® F-127 (0.05-0.30%) also helps enhance resolution of highly hydrophobic compounds, DBP and DEHP. The electrokinetic injection of sodium dodecyl sulphate (SDS) including sample (-10 kV, 20 s) was introduced in this MEEKC system and this yielded about 25-fold sensitivity enhancement compared with hydrodynamic injection (1 psi, 10 s). During method validation, calibration curves were linear (r≥0.99), within a range of 75-500 ng/mL for DBP and 150-1000 ng/mL for DEHP. As the precision and accuracy assays, absolute values of relative standard deviation (RSD) and relative error (RE) in intraday (n=3) and interday (n=5) observations were less than 4.93%. This method was further applied for analyzing six commercial soft drinks and one was found containing 453.67 ng/mL of DEHP. This method is considered feasible for serving as a tool for analysis of highly hydrophobic molecules.

Contemporary sample stacking in analytical electrophoresis

Sample stacking is a term denoting a multifarious class of methods and their names that are used daily in CE for online concentration of diluted samples to enhance separation efficiency and sensitivity of analyses. The essence of these methods is that analytes present at low concentrations in a large injected sample zone are concentrated into a short and sharp zone (stack) in the separation capillary. Then the stacked analytes are separated and detected. Regardless of the diversity of the stacking electromigration methods, one can distinguish four main principles that form the bases of nearly all of them: (i) Kohlrausch adjustment of concentrations, (ii) pH step, (iii) micellar methods, and (iv) transient ITP. This contribution is a continuation of our previous reviews on the topic and brings an overview of papers published during 2010-2012 and relevant to the mentioned principles (except the last one which is covered by another review in this issue).