A fluorescent turn-on probe for bisulfite based on hydrogen bond-inhibited C=N isomerization mechanism

Construction of a Colorimetric and Near-Infrared Ratiometric Fluorescent Sensor and Portable Sensing System for On-Site Quantitative Measurement of Sulfite in Food

Sulfites play imperative roles in food crops and food products, serving as sulfur nutrients for food crops and as food additives in various foods. It is necessary to develop an effective method for the on-site quantification of sulfites in food samples. Here, 7-(diethylamino) quinoline is used as a fluorescent group and electron donor, alongside the pyridinium salt group as an electron acceptor and the C=C bond as the sulfite-specific recognition group. We present a novel fluorescent sensor based on a mechanism that modulates the efficiency of intramolecular charge transfer (ICT), CY, for on-site quantitative measurement of sulfite in food. The fluorescent sensor itself exhibited fluorescence in the near-infrared light (NIR) region, effectively minimizing the interference of background fluorescence in food samples. Upon exposure to sulfite, the sensor CY displayed a ratiometric fluorescence response (I447/I692) with a high sensitivity (LOD = 0.061 μM), enabling accurate quantitative measurements in complex food environments. Moreover, sensor CY also displayed a colorimetric response to sulfite, making sensor CY measure sulfite in both fluorescence and colorimetric dual-signal modes. Sensor CY has been utilized for quantitatively measuring sulfite in red wine and sugar with recoveries between 99.65% and 101.90%, and the RSD was below 4.0%. The sulfite concentrations in live cells and zebrafish were also monitored via fluorescence imaging. Moreover, the sulfite assimilated by lettuce leaves was monitored, and the results demonstrated that excessive sulfite in leaf tissue could lead to leaf tissue damage. In addition, the sulfate-transformed sulfite in lettuce stem tissue was tracked, providing valuable insights for evaluating sulfur nutrients in food crops. More importantly, to accomplish the on-site quantitative measurement of sulfite in food samples, a portable sensing system was prepared. Sensor CY and the portable sensing system were successfully used for the on-site quantitative measurement of sulfite in food.

A ratiometric fluorescence probe for bisulfite detection in live cells and meat samples

The development of reliable probe technology for the detection of bisulfite (HSO3-) in situ in food and biological samples is contributing significantly to food quality and safety assurance as well as community health. In this work, a responsive probe, EHDI, is developed for ratiometric fluorescence detection of HSO3- in aqueous solution, meat samples, and living cells. The probe is designed based on the HSO3- triggered 1,4-addition of electron deficit C = C bond of EHDI. As a result of this specific 1,4-addition, the π-conjugation system was destructed, resulting in blue shifts of the emission from 687 to 440 nm and absorption from 577 to 355 nm. The probe has good water solubility, high sensitivity and selectivity, allowing it to be used for imaging of HSO3- internalization and production endogenously. The capability of probe EHDI for HSO3- was then validated by traditional HPLC technology, enabling accurately detect HSO3- in beef samples. The successful development of this probe thus offers a new tool for investigating HSO3- in situ in food and biological conditions.

Advancements in the development of fluorescent chemosensors based on CN bond isomerization/modulation mechanistic approaches

The CN bond isomerization/modulation as a fluorescence signalling mechanism was explored by studying the photophysical properties of conformationally restricted molecules. From the beginning, the CN bond isomerization method has attracted the attention of researchers owing to its simplicity, high selectivity, and sensitivity in fluorescence evaluation. Continuous developments in the field of sensing using CN bond-containing compounds have been achieved via the customization of the isomerization process around the CN bond in numerous ways, and the results were obtained in the form of specific discrete photophysical changes. CN isomerization causes significant fluorescence enhancement in response to detected metal cations and other reactive species (Cys, Hys, ClO-, etc.) straightforwardly and effectively. This review sheds light on the process of CN bond isomerization/modulation as a signalling mechanism depending on fluorescence changes via conformational restriction. In addition, CN bond isomerization-based fluorescent sensors have yet to be well reviewed, although several fluorescent sensors based on this signalling mechanism have been reported. Therefore, CN-based fluorescent sensors are summarized in this review.

An AIE mechanism-based fluorescent probe for relay recognition of HSO3-/H2O2 and its application in food detection and bioimaging

In view of the important physiological role of HSO₃^- and H₂O₂, it is of great significance to develop fluorescent probes to detect HSO₃^- and H₂O₂ in aqueous medium. We herein report a new fluorescent probe (E)-3-(2-(4-(1,2,2-triphenylvinyl)styryl)benzo [d]thiazol-3-ium-3-yl)propane-1-sulfonate (TPE-y) possessing benzothiazolium salt based on tetraphenylethene (TPE) moiety with aggregation-induced emission (AIE) characteristics. TPE-y can sequentially recognize HSO₃^- and H₂O₂ through colorimetric and fluorescence dual-channel response in HEPES (pH = 7.4, 1% DMSO) buffer solution, and exhibits high sensitivity and selectivity, a large Stokes shift (189 nm), as well as a wide applicable pH range. The detection limits of TPE-y and TPE-y-HSO₃ for HSO₃^- and H₂O₂ are 3.52 μM and 0.15 μM, respectively. The recognition mechanism is verified by ¹H NMR and HRMS methods. Furthermore, TPE-y can detect HSO₃^- in sugar samples, and can image exogenous HSO₃^- and H₂O₂ in living MCF-7 cells. TPE-y can relay detect HSO₃^- and H₂O₂, which is of great significance to maintain the redox balance in organisms.

Small-Molecule Fluorescent Probe for Detection of Sulfite

Sulfite is widely used as an antioxidant additive and preservative in food and beverages. Abnormal levels of sulfite in the body is related to a variety of diseases. There are strict rules for sulfite intake. Therefore, to monitor the sulfite level in physiological and pathological events, there is in urgent need to develop a rapid, accurate, sensitive, and non-invasive approach, which can also be of great significance for the improvement of the corresponding clinical diagnosis. With the development of fluorescent probes, many advantages of fluorescent probes for sulfite detection, such as real time imaging, simple operation, economy, fast response, non-invasive, and so on, have been gradually highlighted. In this review, we enumerated almost all the sulfite fluorescent probes over nearly a decade and summarized their respective characteristics, in order to provide a unified platform for their standardized evaluation. Meanwhile, we tried to systematically review the research progress of sulfite small-molecule fluorescent probes. Logically, we focused on the structures, reaction mechanisms, and applications of sulfite fluorescent probes. We hope that this review will be helpful for the investigators who are interested in sulfite-associated biological procedures.

Fluorogenic Detection of Sulfite in Water by Using Copper(II) Azacyclam Complexes

Copper(II) azacyclam complexes (azacyclam = 1,3,5,8,12-pentaazacyclotetradecane) containing naphthyl or dansyl subunits can be prepared by template synthesis involving proper sulfonamide derivatives as locking fragments. The macrocyclic complexes are very poorly emissive due to the fluorescence-quenching behavior displayed by Cu²⁺ ions. However, the fluorescence can be recovered as a result of the decomposition of the complexes, which induces the release of free light-emitting subunits to the solution. This reaction takes place very slowly in neutral water but its rate is increased by the presence of sulfite. Therefore, [Cu(azacyclam)]²⁺ derivatives have been investigated as simple chemical probes for the fluorogenic detection of sulfite both on laboratory and real samples. Preliminary tests performed on samples of white wine provided sulfite concentration values that are in agreement with those obtained by a standard analytical method.

Imidazopyridine–fluoride interaction: solvent-switched AIE effects via S⋯O conformational locking

Imidazopyridine-based carboxamide exhibiting the aggregation-induced emission phenomenon works effectively in fluoride ion detection through H-bond interaction and subsequent deprotonation.

A Highly Selective Turn-On Fluorescent Probe for the Detection of Zinc

A novel turn-on fluorescence probe L has been designed that exhibits high selectivity and sensitivity with a detection limit of 9.53 × 10⁻⁸ mol/L for the quantification of Zn²⁺. ¹H-NMR spectroscopy and single crystal X-ray diffraction analysis revealed the unsymmetrical nature of the structure of the Schiff base probe L. An emission titration experiment in the presence of different molar fractions of Zn²⁺ was used to perform a Job’s plot analysis. The results showed that the stoichiometric ratio of the complex formed by L and Zn²⁺ was 1:1. Moreover, the molecular structure of the mononuclear Cu complex reveals one ligand L coordinates with one Cu atom in the asymmetric unit. On adding CuCl₂ to the ZnCl₂/L system, a Cu-Zn complex was formed and a strong quenching behavior was observed, which inferred that the Cu²⁺ displaced Zn²⁺ to coordinate with the imine nitrogen atoms and hydroxyl oxygen atoms of probe L.

A colorimetric and far-red fluorescent probe for rapid detection of bisulfite/sulfite in full water-soluble based on biquinolinium and its applications

Bisulfite (HSO₃^-) and sulfite (SO₃^2-) are involved in numerous physiological processes of living systems. However, high levels of these substances are often correlated to many diseases. Herein, we designed and synthesized a simple full water-soluble colorimetric and far-red fluorescent probe (E)-1-methyl-4-(2-(1-methylquinolin-1-ium-3-yl)vinyl)quinolin-1-ium iodide trifluoromethanesulfonate (DQ) for HSO₃^-/SO₃^2- detection by coupling 1,4-dimethylquinolinium with 3-quinolinium carboxaldehyde for the first time. The probe DQ showed high selectivity for HSO₃^- detection via a 1,4-nucleophilic addition reaction with distinct color changes from colorless to purple-red and remarkable far-red fluorescence enhancement in pure aqueous solutions. Specifically, the probe displayed a fast response (<15 s) for bisulfite, which renders it suitable for real time detection of HSO₃^-. Under the optimized conditions, the far-red fluorescence intensity was linear to the concentrations of HSO₃^- in the range from 0 to 25 μM and the detection limit was as low as 0.11 μM. Additionally, the probe could be applied to sense HSO₃^- on paper strips, real sample including vermicelli and sugar and image HSO₃^- in living cells, which indicated that probe DQ has potential application in food samples and living systems.

Selective anions mediated fluorescence "turn-on", aggregation induced emission (AIE) and lysozyme targeting properties of pyrene-naphthalene sulphonyl conjugate

We have designed and synthesized a novel pyrene-naphthalene sulphonyl conjugate, 1-((1Z)-(4-((Z)-4-(pyrene-1-yl)methyleneamino)phenylsulfonyl)phenylimino)methyl)naphthalene-2-ol (PSN) through a facile two-step reactions. It was characterized by various spectral techniques. Fluorescence spectral studies showed that compound PSN featured fluorescence enhancement upon increasing the water content in THF. This can be attributed to the phenomena of aggregated induced emission (AIE), which is confirmed by SEM and AFM studies, due to the restriction of CHN isomerization of PSN. The anion sensing of PSN was examined with various anions. Among these anions, H₂PO₄^- and F^- ions were selectively sensing with a low detection limit of 3.52 × 10^-7 M and 7.23 × 10^-7 M, respectively, and an obvious color change from yellow to orange was observed by the naked eye. The mechanism of sensing involved the formation of hydrogen bonding interaction between O-H group of PSN and H₂PO₄^-/ F^- ions. The binding of PSN with LYZ was also examined by docking studies, which shows that H-bonding and hydrophobic interactions play crucial roles for the interaction of LYZ toward PSN.

Mercapto-responsive polymeric nano-carrier capable of releasing sulfur dioxide

This article reports platform to prepare polymeric nano-carriers capable of releasing SO₂ and hydrophobic payloads upon triggering by mercapto-containing species.

Isocyanide Insertion-Cyclization Reaction for Imidazoisoindol-5-imine Scaffold Synthesis: A Selective Solvatochromic Fluorescent Probe for Methanol Detection

An efficient, ligand-free, and Pd-catalyzed method for the synthesis of imidazoisoindole imine scaffolds with satisfactory yields via C-C and C-N bond formation has been developed. The synthesized scaffolds have unique potential for selective MeOH detection from other solvents, especially EtOH. The appealing features of this transformation are phosphinic ligand-free conditions, the use of a small amount of Pd(OAc)₂, and a practical procedure for the synthesis of imidazoisoindole imine scaffolds.

Investigation of a Sensing Strategy Based on a Nucleophilic Addition Reaction for Quantitative Detection of Bisulfite (HSO3-)

A reaction-based sensor (NAS-1) showed a high affinity and sensitivity to HSO3- via a nucleophilic addition reaction in the aqueous media, giving dual signals from absorption and emission spectra. NAS-1 was successfully applied in RK13 epithelial cells to detect HSO3- in a cellular environment.

Design of a FRET-based fluorescent probe for the reversible detection of SO2and formaldehyde in living cells and mice

Design of a FRET-based fluorescent probe for the reversible detection of SO₂and formaldehyde in living cells and mice.

A new ratiometric fluorescence assay based on resonance energy transfer between biomass quantum dots and organic dye for the detection of sulfur dioxide derivatives

Sulfur dioxide (SO2) is considered as the fourth gas signal molecule after nitric oxide (NO), carbon monoxide (CO) and hydrogen sulfide (H2S). It plays important roles in several physiological processes. Therefore, the design and synthesis of nanoprobes for the detection of SO2 derivatives in cells is of great significance. Herein, we report a new ratiometric fluorescence nanoprobe based on resonance energy transfer (RET) between biomass quantum dots (BQDs) and organic dye (DMI) for the detection of SO2 derivatives. The proposed ratiometric fluorescence assay allows the determination of HSO3 - in the range of 1.0 to 225 μM with a detection limit of 0.5 μM. Importantly, the proposed ratiometric fluorescence nanoprobe exhibits a high photostability and good selectivity for HSO3 - over other chemical species including H2S and biological mercaptans. Quantitation of HSO3 - in cell lysates by using the nanoprobe is demonstrated.

Recent progress in the small-molecule fluorescent probes for the detection of sulfur dioxide derivatives (HSO3-/SO32-)

Sulfur dioxide (SO₂) had been recognized as an environmental pollutant produced from industrial processes. SO₂ is water soluble and forms hydrated SO₂ (SO₂·H₂O), bisulfite ion (HSO₃^-), and sulfite ion (SO₃^2-) upon dissolution in water. SO₂ could be also produced endogenously from sulfur-containing amino acids l-cysteine in mammals. Endogenous SO₂ can maintain the balance of biological sulfur and redox equilibrium in vivo, regulate blood insulin levels and reduce blood pressure. Excess intake of exogenous SO₂ can result in respiratory diseases, cardiovascular diseases and neurological disorders. As a result, fluorescent probes to detect HSO₃^-/SO₃^2- have attracted great attention in recent years. Herein, a general overview was provided with the aim to highlight the typical examples of the HSO₃^-/SO₃^2- fluorescent probes reported since 2010, especially those in the past five years. We have classified HSO₃^-/SO₃^2- fluorescent probes through different chemical reaction mechanisms and wish this review will give some help to the researchers in this field.

Fluorescent Porous Silica Microspheres for Highly and Selectively Detecting Hg2+ and Pb2+ Ions and Imaging in Living Cells

In this work, SiO₂ microspheres were first prepared by a conventional Stöber method and then etched by NaOH solution to obtain porous ones. By tuning the degree of etching, specific surface area of SiO₂ microspheres could be controlled. Then, small fluorescent molecules are synthesized and incorporated onto the surface and/or pores of the SiO₂ via layer-by-layer reaction to obtain fluorescent microspheres, namely, SiO₂-NH₂-BODIPY (SiNBB), SiO₂-NH₂-BODIPY-indole-benzothiazole (SiNBIT), and SiO₂-NH₂-BODIPY-indole-benzoxazole (SiNBIO). The as-prepared microspheres SiNBB exhibit highly sensitive and selective recognition ability for Hg²⁺ and Pb²⁺. When SiNBB encounters Hg²⁺ and Pb²⁺, the fluorescence intensity of SiNBB is increased up to fivefold. SiNBIT and SiNBIO are solely sensitive to Hg²⁺, and both have a single high sensitivity to recognize Hg²⁺. The adsorption efficiency of Hg²⁺ by the three fluorescent microspheres SiNBB, SiNBIT, and SiNBIO reached 2.91, 0.99, and 0.98 g/g of microspheres, respectively. Experimental results of A549 cells and zebrafish indicate that the fluorescent microspheres are permeable to cell membranes and organisms. The distribution of Hg²⁺ in the brain of zebrafish was obtained by the fluorescence confocal imaging technique, and Hg²⁺ was successfully detected in A549 cells and zebrafish.

A fluorescent probe for colorimetric detection of bisulfite and application in sugar and red wine

A new fluorescent probe made from (E)-2-(benzo[d]thiazol-2-yl)-3-(6-hydroxynaphthalen-2-yl) acrylonitrile (Probe 1) was synthesized for the determination of bisulfite concentrations in real food samples (red wine and sugar). Adding bisulfite to a Probe 1 solution caused a marked decrease in fluorescence intensity and a visual color change from yellow to light yellow. This distinct color response indicates that Probe 1 could be used as a visual sensor for bisulfite. Probe 1 can detect bisulfite quantitatively in the range 0-400 μM with a detection limit of 0.10 μM. This makes Probe 1 a convenient signaling instrument for determining bisulfite levels in sugar and red wine samples.

Biomimetic systems trigger a benzothiazole based molecular switch to 'turn on' fluorescence

Molecular switches are valuable tools for the detection of many chemical and biological processes. On the other hand, Schiff bases are known for their simplicity in synthesis and their enormous biochemical applications. In this scenario, when a strategically designed Schiff base acts as a molecular switch in biomimetic environments drags inevitable attention. In this article, we hereby demonstrate an interesting behavior of a strategically designed bioactive benzothiazole based Schiff base (E)-2-(((6-chlorobenzo[d]thiazol-2-ylimino)methyl)-5-diethylamino) phenol (CBMDP) whose fluorescence characteristics dramatically modulate as consequence of its structural modification in aqueous and biomimetic environments individually. Electronic absorption, steady state and time resolved fluorescence spectroscopic techniques along with DFT based quantum chemical calculation evidence that in pure organic solvents CBMDP exists in highly fluorescent enol-imine (N) form which transform into feebly fluorescent hydrated species (H) in bulk aqueous media. Contrariwise, on interaction with the ionic and non-ionic micellar media or with liposome, a structural restoration occurs from less fluorescent hydrated (H) species into a highly fluorescent normal (N) one. This molecular flipping of the title compound upon micellar compartmentalization is possibly caused by the micropolarity of the local environment and further supported by its spectral behavior in different polarity gradient solvent mixture of water-dioxane (protic-aprotic) and water-methanol (protic -protic). Usually, Schiff bases are prone to hydrolysis in aqueous media, interestingly, the structural framework of this strategically designed molecule only allow the first step of hydrolysis, which is hydration of azomethine linkage whereas it withstand the second step, and that possibly helps the structural restoration process. Hence the article described herein may emphasize how a systematically designed Schiff base framework can be used as 'turn off- turn on' fluorescent molecular switch which may be extremely useful for its applications in the area of biochemical sensors.

A New Red-Emitting Fluorescence Probe for Rapid and Effective Visualization of Bisulfite in Food Samples and Live Animals

The development of new methods for rapid and effective detection of bisulfite (HSO₃^-) in food samples and imaging of HSO₃^- intake in animals is of significant importance due to the key roles of HSO₃^- in food quality assurance and community health. In this work, a new responsive fluorescence probe, EQC, is reported for the quantitative detection of HSO₃^- in food samples and visualization of HSO₃^- intake in animals. Upon addition of HSO₃^-, the UV-vis absorption and red emission of EQC were significantly decreased within 120 s. The changes in absorption and emission spectra of EQC were rationalized by theoretical computations. The proposed reaction mechanism of EQC with HSO₃^- was confirmed by high-resolution mass spectrometry (HRMS) and spectroscopic titration measurements. EQC has the advantages of high sensitivity, selectivity (a detection limit of 18.1 nM), and fast response toward HSO₃^-, which enable rapid and effective HSO₃^- detection in buffer solution. The practical applications of EQC were demonstrated by the detection of HSO₃^- in food samples and the imaging of HSO₃^- intake in live animals.

A chromenoquinoline-based two-photon fluorescent probe for the highly specific and fast visualization of sulfur dioxide derivatives in living cells and zebrafish

Sulfur dioxide (SO₂) derivatives play critical roles in various biological processes. Therefore, effective methods for monitoring SO₂ are of vital importance in bisulfite/sulfite biology. In this study, a two-photon (TP) imaging probe (CQ-SO₂) for detecting SO₂ derivatives was designed and constructed, based on the chromenoquinoline (CQ) fluorophore and a β-chlorovinyl aldehyde sensing moiety. The TP properties of the CQ derivatives were revealed for the first time in this study. This study enriched the biological application range of CQ derivatives and also provided a new choice for the development of TP dyes. In particular, the CQ-SO₂ probe exhibited a fast response time (about 5 s), low detection limit (16 nM) and ultrahigh specificity towards SO₂ derivatives. Furthermore, the probe was successfully applied to the highly specific TP bioimaging of SO₂ derivatives in living cells and zebrafish.

Rapid "turn-on" photoluminescence detection of bisulfite in wines and living cells with a formyl bearing bis-cyclometalated Ir(iii) complex

A new photoluminescence (PL) probe based on a formyl bearing bis-cyclometalated Ir(iii) complex, [Ir(ppy)2phen-CHO]+PF6- (1), is synthesized and applied to the selective detection of a bisulfite anion (HSO3-). Probe 1 is prepared using 2-phenylpyridine (ppy) as the C^N main ligand and 1,10-phenanthroline-5-carboxaldehyde (phen-CHO) as the N^N ancillary ligand. Probe 1 displayed excellent selective PL enhancement in response to HSO3- in acetic acid-sodium acetate buffer solution (pH = 5.0). The increase of PL signal is directly proportional to the concentration of HSO3- in the range of 2 μM to 45 μM with a detection limit of 0.9 μM using 50 μM probe 1 and in the range of 0.5 μM to 6 μM with a detection limit of 0.3 μM using 10 μM probe 1. More importantly, probe 1 can respond to HSO3- rapidly within 40 s. Furthermore, probe 1 was successfully applied to detect HSO3- in real white wines and the bioimaging of HSO3- in living cells. The superior properties of probe 1 make it of great potential use for studying the effects of HSO3- in other biosystems.

"ON-OFF-ON" fluorescent probes based on nitrogen-doped carbon dots for hypochlorite and bisulfite detection in living cells

Although hypochlorite (ClO-) and bisulfite (HSO3-) play important roles in the biological immune system and the aging process of living organisms, they are also classified as a third type of carcinogens. Hence, a convenient and efficient method to monitor ClO- and HSO3- in ecological environments is highly desired. In this article, an "ON-OFF-ON" fluorescent probe based on nitrogen-doped carbon dots (N-CDs) for the detection of ClO- and HSO3- has been demonstrated successfully. Because of the destruction of the surface passivation layer, the fluorescence of the N-CDs was quenched by ClO-. Furthermore, the quenched fluorescence of the N-CDs was restored efficiently through the increase in conjugation from the attached sulfo groups, indicating the feasibility of ClO- and HSO3- detection. This fluorescent probe exhibited excellent sensitivity and selectivity to ClO- and HSO3- detection with the limits of detection (LODs) of 3.4 μM and 0.27 μM in aqueous solution, respectively. In addition, the as-prepared N-CDs were successfully applied to detect both ClO- and HSO3- in living cells due to their low toxicity and fast response speed.

Pyrazoline-based colorimetric and fluorescent probe for detection of sulphite

This work reports a novel Michael addition based sensor for fluorescence detection of sulphite in river water samples.

A FRET based ratiometric fluorescent probe for detection of sulfite in food

A new fluorophore pyrido[1,2-a]benzimidazole based ratiometric fluorescent probe for the selective detection of sulfite ions in water was investigated.

Rhodamine scaffolds as real time chemosensors for selective detection of bisulfite in aqueous medium

Rhodamine and its derivatives have been widely used in designing fluorescent ‘turn on’ cation sensors, while very few rhodamine based fluorescent probes have been reported to date for the detection of anions in water.

A novel NIR fluorescent probe for the double-site and ratiometric detection of SO2 derivatives and its applications

A “naked-eye” fluorescent probe based on xanthenes was obtained.

A reversible fluorescent probe based on C[double bond, length as m-dash]N isomerization for the selective detection of formaldehyde in living cells and in vivo

Formaldehyde (FA) is an endogenously produced reactive carbonyl species (RCS) through biological metabolic processes whose concentration is closely related to human health and disease. Noninvasive and real-time detection of FA concentration in organisms is very important for revealing the physiological and pathological functions of FA. Herein, we design and synthesize a reversible fluorescent probe BOD-NH₂ for the detection of FA in living cells and in vivo. The probe is composed of two moieties: the BODIPY fluorophore and the primary amino group response unit. The probe undergoes an intracellular aldimine condensation reaction with FA and forms imine (C[double bond, length as m-dash]N) which will result in C[double bond, length as m-dash]N isomerization and rotation to turn-off the fluorescence of the probe. It is important that the probe can show a reversible response to FA. The probe BOD-NH₂ has been successfully applied for detecting and imaging FA in the cytoplasm of living cells. BOD-NH₂ is capable of detecting fluctuations in the levels of endogenous and exogenous FA in different types of living cells. The probe can be used to visualize the FA concentration in fresh hippocampus and the probe can further qualitatively evaluate the FA concentrations in ex vivo-dissected organs. Moreover, BOD-NH₂ can also be used for imaging in mice. The above applications make our new probe a potential chemical tool for the study of physiological and pathological functions of FA in cells and in vivo.

A novel pyrene-based dual multifunctional fluorescent probe for differential sensing of pH and HSO3− and their bioimaging in live cells

We designed and synthesized a new fluorescent probe for detecting pH and HSO₃⁻ using pyrene as an electron donor (D) and pyridine as an electron acceptor (A).

A simple and highly selective 1,2,4,5-tetrazine-based colorimetric probe for HSO3− ion recognition in food

3,6-Bis-substituted-1,2,4,5-tetrazine-based colorimetric probes, which have good water solubility, could detect bisulfate with high sensitivity and selectivity in food samples.

Two novel pyrazole-based chemosensors: “naked-eye” colorimetric recognition of Ni2+ and Al3+ in alcohol and aqueous DMF media

Sensors Pry-Flu and Pry-R6G were found to have a wide pH range (4–12), good anti-jamming ability and can be reused. And the sensors Pry-Rhy and Pyr-R6G could be quite useful for the fabrication of sensing devices with fast and convenient detection of Ni²⁺ and Al³⁺.

Detection of HSO3-: A Rapid Colorimetric and Fluorimetric Selective Sensor for Detecting Biological SO2 in Food and Living Cells

A rapid fluorescent probe based on the conjugate of chromone and benzothiazole moiety was presented, which could selectively respond to HSO3- over other common anions and thiols. The function of the probe relies on nucleophilic addition to break down the π-conjugation. The probe can be used as a signal tool to determine HSO3- levels in sugar-based food and living cells.