Non-Invasive Plasmonic-Based Real-Time Characterization of Cardiac Drugs on Cardiomyocytes Functional Behavior

In the fabrication of cardiac tissue, an important factor is continuous measurement of its contraction features. A module that allows for a dynamic system capable of noninvasive and label-free monitoring of the contraction profile under administering chemicals and drugs is highly valuable for understanding accurate tissue mechanobiology. In this research, we have successfully demonstrated the use of surface plasmon resonance (SPR) technology for the first time to characterize the contractility of cardiac cells in response to Blebbistatin and ATP drug exposure in real tme. An optimal flow rate of 10 μL/min was selected for a continuous flow of warm media,and 10 μM drug administration effect was detected with high spatiotemporal sensitivity on contracting cardiomyocytes. Our drug screening has identified the source of the SPR periodic signal to be direct cell contraction rather than action potentials or calcium signaling. Per our results, SPR has high potential in applications in least-interference real-time and label-free tissue characterizations and cellular properties analysis from a functional and structural point of view.

Conducting polymer-based electrochemical biosensors for neurotransmitters: A review

Neurotransmitters are important biochemical molecules that control behavioral and physiological functions in central and peripheral nervous system. Therefore, the analysis of neurotransmitters in biological samples has a great clinical and pharmaceutical importance. To date, various methods have been developed for their assay. Of the various methods, the electrochemical sensors demonstrated the potential of being robust, selective, sensitive, and real time measurements. Recently, conducting polymers (CPs) and their composites have been widely employed in the fabrication of various electrochemical sensors for the determination of neurotransmitters. Hence, this review presents a brief introduction to the electrochemical biosensors, with the detailed discussion on recent trends in the development and applications of electrochemical neurotransmitter sensors based on CPs and their composites. The review covers the sensing principle of prime neurotransmitters, including glutamate, aspartate, tyrosine, epinephrine, norepinephrine, dopamine, serotonin, histamine, choline, acetylcholine, nitrogen monoxide, and hydrogen sulfide. In addition, the combination with other analytical techniques was also highlighted. Detection challenges and future prospective of the neurotransmitter sensors were discussed for the development of biomedical and healthcare applications.

Electrochemical measurement of quantal exocytosis using microchips

Carbon-fiber electrodes (CFEs) are the gold standard for quantifying the release of oxidizable neurotransmitters from single vesicles and single cells. Over the last 15 years, microfabricated devices have emerged as alternatives to CFEs that offer the possibility of higher throughput, subcellular spatial resolution of exocytosis, and integration with other techniques for probing exocytosis including microfluidic cell handling and solution exchange, optical imaging and stimulation, and electrophysiological recording and stimulation. Here we review progress in developing electrochemical electrode devices capable of resolving quantal exocytosis that are fabricated using photolithography.

Rapid Voltammetric Measurements at Conducting Polymer Microelectrodes Using Ultralow-Capacitance Poly(3,4-ethylenedioxythiophene):Tosylate

We use a vapor-phase synthesis to generate conducting polymer films with low apparent capacitance and high conductance enabling rapid electrochemical measurements. Specifically, oxidative chemical vapor deposition was used to create thin films of poly(3,4-ethylenedioxythiophene):tosylate (

PEDOT

tosylate). These films had a conductance of 17.1 ± 1.7 S/cm. Furthermore, they had an apparent capacitance of 197 ± 14 μF/cm(2), which is an order of magnitude lower than current commercially available and previously reported PEDOT. Using a multistage photolithography process, these films were patterned into

PEDOT

tosylate microelectrodes and were used to perform fast-scan cyclic voltammetry (FSCV) measurements. Using a scan rate of 100 V/s, we measured ferrocene carboxylic acid and dopamine by FSCV. In contrast to carbon-fiber microelectrodes, the reduction peak showed higher sensitivity when compared to the oxidation peak. The adsorption characteristics of dopamine at the polymer electrode were fit to a Langmuir isotherm. The low apparent capacitance and the microlithographic processes for electrode design make

PEDOT

tosylate an attractive material for future applications as an implantable biosensor for FSCV measurements. Additionally, the integration of

PEDOT

tosylate electrodes on plastic substrates enables new electrochemical measurements at this polymer using FSCV.

Dynamic electrochemical quantitation of dopamine release from a cells-on-paper system

A simple hybrid microfluidic/electrochemical system is used to observe the secretion of neurotransmitters from a cells-on-paper system.

Two approaches for addressing electrochemical electrode arrays with reduced external connections

Although patterning hundreds or thousands of electrochemical electrodes on lab-on-a-chip devices is straightforward and cost-effective using photolithography, easily making connections between hundreds of electrodes and external amplifiers remains a bottleneck. Here we describe two electrode addressing approaches using multiple fluid compartments that can potentially reduce the number of external connections by ~100-fold. The first approach enables all compartments on the device to be filled with solution at the same time, and then each fluid compartment is sequentially electrically activated to make the measurements. The second approach achieves lower measurement noise by sequentially filling recording chambers with solution. We propose an equivalent circuit to explain measurement noise in these recording configurations and demonstrate application of the approaches to measure quantal exocytosis from individual cells. A principle advantage of using these approaches is that they reduce the fraction of the microchip area that needs to be dedicated to making external connections and therefore reduces the cost per working electrode.

Biocompatible PEDOT:Nafion composite electrode coatings for selective detection of neurotransmitters in vivo

A Nafion and poly(3,4-ethylenedioxythiophene) (PEDOT) containing composite polymer has been electropolymerized on carbon-fiber microelectrodes with the goal of creating a mechanically stable, robust, and controllable electrode coating that increases the selectivity and sensitivity of in vivo electrochemical measurements. The coating is deposited on carbon-fiber microelectrodes by applying a triangle waveform from +1.5 V to -0.8 V and back in a dilute solution of ethylenedioxythiophene (EDOT) and Nafion in acetonitrile. Scanning electron microscopy demonstrated that the coating is uniform and ∼100 nm thick. Energy-dispersive X-ray spectroscopy demonstrated that both sulfur and fluorine are present in the coating, indicating the incorporation of PEDOT (poly(3,4-ethylenedioxythiophene) and Nafion. Two types of PEDOT:Nafion coated electrodes were then analyzed electrochemically. PEDOT:Nafion-coated electrodes made using 200 μM EDOT exhibit a 10-90 response time of 0.46 ± 0.09 s versus 0.45 ± 0.11 s for an uncoated fiber in response to a 1.0 μM bolus of dopamine. The electrodes coated using a higher EDOT concentration (400 μM) are slower with a 10-90 response time of 0.84 ± 0.19 s, but display increased sensitivity to dopamine, at 46 ± 13 nA/μM, compared to 26 ± 6 nA/μM for the electrodes coated in 200 μM EDOT and 13 ± 2 nA/μM for an uncoated fiber. PEDOT:Nafion-coated electrodes were lowered into the nucleus accumbens of a rat, and both spontaneous and electrically evoked dopamine release were measured. In addition to improvements in sensitivity and selectivity, the coating dramatically reduces acute in vivo biofouling.

Development and characterization of a diamond-insulated graphitic multi electrode array realized with ion beam lithography

The detection of quantal exocytic events from neurons and neuroendocrine cells is a challenging task in neuroscience. One of the most promising platforms for the development of a new generation of biosensors is diamond, due to its biocompatibility, transparency and chemical inertness. Moreover, the electrical properties of diamond can be turned from a perfect insulator into a conductive material (resistivity ∼mΩ·cm) by exploiting the metastable nature of this allotropic form of carbon. A 16-channels MEA (Multi Electrode Array) suitable for cell culture growing has been fabricated by means of ion implantation. A focused 1.2 MeV He⁺ beam was scanned on a IIa single-crystal diamond sample (4.5 × 4.5 × 0.5 mm³) to cause highly damaged sub-superficial structures that were defined with micrometric spatial resolution. After implantation, the sample was annealed. This process provides the conversion of the sub-superficial highly damaged regions to a graphitic phase embedded in a highly insulating diamond matrix. Thanks to a three-dimensional masking technique, the endpoints of the sub-superficial channels emerge in contact with the sample surface, therefore being available as sensing electrodes. Cyclic voltammetry and amperometry measurements of solutions with increasing concentrations of adrenaline were performed to characterize the biosensor sensitivity. The reported results demonstrate that this new type of biosensor is suitable for in vitro detection of catecholamine release.

Microwave-plasma dry-etch for fabrication of conducting polymer microelectrodes

An inexpensive dry etch technology based on a low-pressure microwave plasma generated in a countertop microwave oven is characterized for the patterning of a conductive polymer microelectrode. The etch process is described, and the microwave-generated plasma is characterized by emission spectroscopy. The plasma is generated with an atmospheric mixture of mostly nitrogen and oxygen. A 10 μm wide band microelectrode composed of PEDOT:Tosylate, an optically transparent conductive polymer, is fabricated on a plastic substrate. Conductive polymer etch rates are approximately 280-300 nm/minute. A patterned microelectrode is characterized by atomic force microscopy. The horizontal distance of a 10-90% height of a plasma-etched 150 nm thick electrode was measured to be 360 ± 200 nm (n = 5). Electrodes are further characterized using steady-state cyclic voltammetry, and they have an electroactive area congruent with their geometric area. Finally, a complete device is assembled and used as a separation platform for biogenic amines. A microwave-etched 250 μm PEDOT:PSS electrode is employed for end-channel electrochemical detection on this microchip, where an electrophoretic separation of dopamine and catechol and a micellar electrokinetic chromatography separation of dopamine and serotonin are performed. Both mass and concentration LODs are comparable to other electrochemical detectors in an end-channel configuration. With the added advantages of easy processing, robustness, optical transparency, and low cost, we expect microwave-etched polymer films to be a viable alternative to traditional electrodes.

A compact multifunctional microfluidic platform for exploring cellular dynamics in real-time using electrochemical detection

Dopamine detection from PC12 cell populations and monitoring of yeast redox metabolism demonstrate the multifunctionality of the compact microfluidic cell culture and electrochemical analysis platform with in-built fluid handling and detection unit.