Gold nanoclusters-based fluorescence resonance energy transfer for rapid and sensitive detection of Pb2

Lead pollution has remained a significant global concern for several decades due to its detrimental effects on the brain, heart, kidneys, lungs, and immune system across all age groups. Addressing the demand for detecting trace amounts of lead in food samples, we have developed a novel biosensor based on fluorescence resonance energy transfer (FRET) from fluorescein R6G to gold nanoclusters (AuNCs-CCY). By utilizing polypeptides as a template, we successfully synthesized AuNCs-CCY with an excitation spectrum that overlaps with the emission spectrum of R6G. Exploiting the fact that Pb2+ induces the aggregation of gold nanoclusters, leading to the separation of R6G from AuNCs-CCY and subsequent fluorescence recovery, we achieved the quantitative detection of Pb2+. Within the concentration range of 0.002-0.20 μM, a linear relationship was observed between the fluorescence enhancement value (F-F0) and Pb2+ concentration, characterized by the linear equation y = 2398.69x + 87.87 (R2 = 0.996). The limit of detection (LOD) for Pb2+ was determined to be 0.00079 μM (3σ/K). The recovery rate ranged from 96 % to 104 %, with a relative standard deviation (RSD) below 10 %. These findings demonstrate the potential application value of our biosensor, which offers a promising approach to address the urgent need for sensitive detection of heavy metal ions, specifically Pb2+, in food samples.

Differential response for multiple ions: a smart probe to construct optically tunable molecular logic systems

A rhodamine-based optical probe has been designed through a one-pot synthetic protocol involving phenanthroline as a binding motif. The compound showed a bright pink coloration specifically upon the addition of Cu²⁺ and Hg²⁺ ions. However, the appearance of bright red fluorescence was observed only in the presence of Hg²⁺. Considering both, we can detect and discriminate these two ions even at ppb level concentration. Furthermore, these in situ generated metal complexes were utilized for the selective recognition of CN^- and I^- ions. Pre-coated TLC plates were developed for rapid on-site detection of these toxic ions even in remote places. Finally, on a single molecular probe based on differential opto-chemical interactions with different ions (Cu²⁺, Hg²⁺, CN^- and I^-), we were able to design numerous trivial (OR, NOR) and non-trivial (INHIBIT, IMPLICATION, COMPLEMENT, TRANSFER, NOT-TRANSFER) logic gates. Most fascinatingly, we can switch the logic response from one type to another by simply tuning only the optical output channel.

Recent advances in the visual detection of ions and molecules based on gold and silver nanoclusters

Gold and silver nanoclusters (Au/AgNCs) exhibit excellent application potential in optical biosensors because of their low toxicity, excellent biocompatibility, and unique optical properties. Au/AgNCs-based visual analysis methods have emerged as powerful tools for detecting various targets with convenient readout. In this review, the applications of Au/AgNCs in the visual detection and bioimaging of metal ions, inorganic anions, small molecules, and biomacromolecules in various devices are summarized. Furthermore, this review also discusses the future perspectives of the field.

A fast, highly sensitive and selective assay of iodide ions with single-stranded DNA-templated copper nanoparticles as a fluorescent probe for its application in Kunming mice samples

The development of fast, sensitive, selective and flexible methods for the detection of iodide is highly demanded and is of great significance. In this work, single-stranded DNA-templated copper nanoparticles (ssDNA-CuNPs) generated by sodium ascorbate reduction of Cu²⁺ along the single-stranded DNA of poly-T were utilized as a fluorescent probe for the determination of iodide ions (I^-). The detection scheme is based on the instant quenching of the fluorescence of ssDNA-CuNPs by iodide ions. I^- can be quantified in the concentration range from 0.050 to 40 μM and from 40 to 80 μM, and the limit of detection is as low as 15 nM. This method provides a simple and convenient strategy for the biochemical assay of I^-, which is also helpful for early diagnosis of related diseases. The establishment of a low cost and fast detection method would be particularly important in developing countries where medical supplies are lacking.

Copper nanoclusters as fluorescence-quenching probes for the quantitative analysis of total iodine

Tannic acid-coated copper nanoclusters (CuNCs@TA) were synthesized and used quantitatively to analyze iodine in kelp. Compared with other methods for iodine detection, the proposed method showed excellent performance. The iodine-induced linear decrease in the fluorescence intensity of CuNCs@TA allowed the quantitative detection of iodine in the range 20-100 μM, and the limit of detection for iodine was 18 nM. The probe can be used for the determination of iodine in real samples with reliable and accurate results. Modified Stern-Volmer equation and thermodynamic calculation studies were used to discuss the quenching mechanism.

Synthesis of “amphiphilic” carbon dots and their application for the analysis of iodine species (I2, I− and IO3−) in highly saline water

In this work, “amphiphilic” carbon dots (A-CDs) with a strong green fluorescence were synthesized by a simple and green method at room temperature, and the synthesized A-CDs could be used for the analysis of iodine species (I₂, I⁻ and IO₃⁻) in highly saline water.

Fluorescent sensing of sulfide ions based on papain-directed gold nanoclusters

This fluorescence sensing system showed excellent performance and could be applied to the determination of S²⁻ in natural water samples.

Optical reading of contaminants in aqueous media based on gold nanoparticles

With increasing trends of global population growth, urbanization, pollution over-exploitation, and climate change, the safe water supply has become a global issue and is threatening our society in terms of sustainable development. Therefore, there is a growing need for a water-monitoring platform with the capability of rapidness, specificity, low-cost, and robustness. This review summarizes the recent developments in the design and application of gold nanoparticles (AuNPs) based optical assays to detect contaminants in aqueous media with a high performance. First, a brief discussion on the correlation between the optical reading strategy and the optical properties of AuNPs is presented. Then, we summarize the principle behind AuNP-based optical assays to detect different contaminants, such as toxic metal ion, anion, and pesticides, according to different optical reading strategies: colorimetry, scattering, and fluorescence. Finally, the comparison of these assays and the outlook of AuNP-based optical detection are discussed.

Membrane-based assay for iodide ions based on anti-leaching of gold nanoparticles

We report a label-free colorimetric strategy for the highly selective and sensitive detection of iodide (I(-)) ions in human urine sample, seawater and edible salt. A poly(N-vinyl-2-pyrrolidone)-stabilized Au nanoparticle (34.2-nm) was prepared to detect I(-) ions using silver (Ag(+)) and cyanide (CN(-)) ions as leaching agents in a glycine-NaOH (pH 9.0) solution. For the visual detection of the I(-) ions by naked eye, and for long time stability of the probe, Au nanoparticles (NPs) decorated mixed cellulose ester membrane (MCEM) was prepared (Au NPs/MCEM). The Au NPs-based probe (CN(-)/Ag(+)-Au NPs/MCEM) operates on the principle that Ag(+) ions form a monolyar silver atoms/ions by aurophilic/argentophilic interactions on the Au NPs and it accelerates the leaching rate of Au atoms in presence of CN(-) ions. However, when I(-) is introduced into this system, it inhibits the leaching of Au atoms because of the strong interactions between Ag/Au ions and I(-) ions. Inductively coupled plasma mass spectrometry, surface-assisted laser desorption/ionization time-of-flight mass spectrometry were used to characterize the surface properties of the Au NPs in the presence of Ag(+) and I(-). Under optimal solution conditions, the CN(-)/Ag(+)-Au NPs/MCEM probe enabled the detection of I(-) by the naked eye at nanomolar concentrations with high selectivity (at least 1000-fold over other anions). In addition, this cost-effective probe allowed the determination of I(-) ions in complex samples, such as urine, seawater, and edible salt samples.

A “light-on” colorimetric assay for anion detection using the inhibitory effect of anions on the catalytic activity of metal nanoparticles for the degradation of methyl orange

A “light-on” colorimetric method for anion detection using the catalytic ability of metal nanoparticles for methyl orange (MO) degradation was developed.