Unraveling Exciton-Plasmon Coupling and the PIRET Mechanism in Decorated Silicon Nanowires

Exciton-plasmon coupling is a fascinating physical phenomenon that has been investigated in various metal semiconductor systems. Intentionally chosen silicon nanowires (SiNWs) systems act as a host material for providing exciton as well as silicon oxide as a thin dielectric. A clear blue-shift in photoluminescence (PL) peak and a significant increase in visible range absorption were observed for metal nanoparticle (MNP) decorated SiNWs (D-SiNWs) which signifies the presence of exciton-plasmon coupling. A further investigation reveals that the possibility of the occurrence of the plasmon-induced resonance energy transfer (PIRET) mechanism is higher. The PL intensity enhancement in Au-decorated SiNWs is higher (∼38 times) in comparison to that in Pt due to the presence of a strong and localized electric field of plasmons near the interface of metal and semiconductors. Moreover, splitting in PL for gold-decorated SiNWs might be due to the presence of dipole-quadrupole coupling along with dipole-dipole coupling, which further increases the strength of the PIRET mechanism.

Porous silicon decorated with Au/TiO2 nanocomposites for efficient photoinduced enhanced Raman spectroscopy

In this study, we investigated the potential of porous silicon (PSi) modified with Au/TiO₂ nanocomposites (NCPs) as a substrate for photoinduced enhanced Raman spectroscopy (PIERS). One-step pulsed laser-induced photolysis (PLIP) was used to embed Au/TiO₂ NCPs in the surface of PSi. Scanning electron microscopy revealed that adding TiO₂ nanoparticles (NPs) during PLIP led to the formation of predominantly spherical Au NPs with a diameter of approximately 20 nm. Furthermore, modifying the PSi substrate with Au/TiO₂ NCPs considerably enhanced the Raman signal of rhodamine 6G (R6G) after 4 h of ultraviolet (UV) irradiation. Real-time monitoring of the Raman signals of R6G at different concentrations under UV irradiation revealed that the amplitude of the signals increased with the irradiation time for R6G concentrations ranging from 10^-3 M to 10^-5 M. PSi substrates decorated with Au/TiO₂ NCPs may be used to develop materials for PIERS applications.

Highly Sensitive Flexible SERS-Based Sensing Platform for Detection of COVID-19

COVID-19 continues to spread and has been declared a global emergency. Individuals with current or past infection should be identified as soon as possible to prevent the spread of disease. Surface-enhanced Raman spectroscopy (SERS) is an analytical technique that has the potential to be used to detect viruses at the site of therapy. In this context, SERS is an exciting technique because it provides a fingerprint for any material. It has been used with many COVID-19 virus subtypes, including Deltacron and Omicron, a novel coronavirus. Moreover, flexible SERS substrates, due to their unique advantages of sensitivity and flexibility, have recently attracted growing research interest in real-world applications such as medicine. Reviewing the latest flexible SERS-substrate developments is crucial for the further development of quality detection platforms. This article discusses the ultra-responsive detection methods used by flexible SERS substrate. Multiplex assays that combine ultra-responsive detection methods with their unique biomarkers and/or biomarkers for secondary diseases triggered by the development of infection are critical, according to this study. In addition, we discuss how flexible SERS-substrate-based ultrasensitive detection methods could transform disease diagnosis, control, and surveillance in the future. This study is believed to help researchers design and manufacture flexible SERS substrates with higher performance and lower cost, and ultimately better understand practical applications.

Immersion-plated palladium nanoparticles onto meso-porous silicon layer as novel SERS substrate for sensitive detection of imidacloprid pesticide

Herein, we demonstrate the effectiveness of surface-enhanced Raman scattering (SERS) to detect trace concentration of potentially harmful imidacloprid pesticide. To achieve this ultimate objective, a rapid and highly effective methodology for the fabrication of active and stable porous silicon (PSi) plated palladium nanoparticles (PdNPs) SERS substrates by an electrochemical anodization and immersion plating routes was applied. The PSi layers were fabricated by the electrochemical anodization of a silicon wafer in ethanoic fluoride solution, followed by uniformly deposition of PdNPs via a simple immersion plating technique. The structural features and morphology of fabricated frameworks of PSi-Pd NPs have been investigated by field emission scanning electron microscopy (FE-SEM) with energy dispersive X-ray (EDX), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared (FT-IR) spectra. The PSi substrate demonstrates a meso-porous morphology with good distribution, good pore density and average pore sizes around 20 nm. The SERS performance of Si-Pd NPs and PSi-Pd NPs substrates has been examined taking imidacloprid (an insecticide) as a target analyte. The SERS signal of imidacloprid using PSi-Pd NPs substrate exhibited immense enhancement compared to the Si-Pd NPs substrate. The active substrate revealed excellent detectable performance with a concentration as low as 10^-9 M imidacloprid and an enhancement factor (EF) of 1.2 × 10⁵. This large EF is fundamentally ascribed to the combined effect of the electromagnetic improvement and charge transfer mechanisms. Additionally, no aging effect was observed for the present substrates kept in air for two weeks. Striking enhancement in Raman spectral signals obtained with the current PSi-Pd NPs substrates can provide a simple and smooth platform towards the sensitive detection of various target analytes.

Three-Dimensional-Stacked Gold Nanoparticles with Sub-5 nm Gaps on Vertically Aligned TiO2 Nanosheets for Surface-Enhanced Raman Scattering Detection Down to 10 fM Scale

Seeking for ultrasensitive and low-cost substrates is highly demandable for practical applications of surface-enhanced Raman scattering (SERS) technology. In this work, we report an ultrasensitive SERS-active substrate based on wet-chemistry-synthesized vertically aligned large-area TiO₂ nanosheets (NSs) decorated by densely packed gold nanoparticles (Au NPs) with sub-5 nm gaps. Via a multistep successive deposition process, three-dimensional-stacked Au NPs sandwiched by a 3 nm SiO₂ layer were assembled onto the TiO₂ NS, enabling numerous hotspots due to the formation of both ultratiny plasmonic gaps and semiconductor/metal interfaces. Experimental results show that the fabricated substrate displays a detection limit down to 10 fM (10^-14 M) without involving any condensation process by using the crystal violet as probe molecules. Control experiments and electromagnetic simulations indicate that the nanogaps defined by the 3 nm spacer are essential for the obtained excellent SERS performance. With its ultrasensitive detection capability, we demonstrate that the fabricated SERS substrate can be used for the trace analysis of melamine in milk.

Plasmonic silvered nanostructures on macroporous silicon decorated with graphene oxide for SERS-spectroscopy

A method for fabricating surface-enhanced Raman scattering (SERS)-active substrates by immersion deposition of silver on a macroporous silicon (macro-PS) template with pore diameters and depth ranging from 500-1000 nm is developed. The procedure for the formation of nanostructured silver films in the layers of macro-PS was optimized. Silver particles of dimensions in the nano- and submicron-scale were formed on the external surface of the macro-PS immersed in the water-ethanol solution of AgNO_3, while the inner pore walls were covered by smaller, 10-30 nm diameter, silver nanoparticles. Upon introducing the hydrofluoric acid to the reaction mixture, the size of nanoparticles grown on the pore walls increased up to 100-150 nm. Such nanostructures were found to yield SERS-signal intensities from CuTMpyP4 analyte molecules of the same order to those obtained from silvered mesoporous silicon reported previously. The tested storage stability for the silvered macro-PS-based samples reached up to 8 months. However, degradation of the SERS intensity under illumination by the laser beam during spectral measurements was observed. To improve the stability of the SERS-signal a hybrid structure involving graphene oxide deposited on the top of analyte molecules adsorbed on the Ag/macro-PS was formed. A systematic observation of the time evolution of the characteristic peak at 1365 cm^-1 showed that the addition of the oxidized graphene layer over the analyte results in ∼2 times slower decay of the Raman intensity, indicating that the graphene coating can be used to enhance the stability of the SERS-signal from the CuTMpyP4 molecules.

Progress in the Development of SERS-Active Substrates Based on Metal-Coated Porous Silicon

The present work gives an overview of the developments in surface-enhanced Raman scattering (SERS) with metal-coated porous silicon used as an active substrate. We focused this review on the research referenced to SERS-active materials based on porous silicon, beginning from the patent application in 2002 and enclosing the studies of this year. Porous silicon and metal deposition technologies are discussed. Since the earliest studies, a number of fundamentally different plasmonic nanostructures including metallic dendrites, quasi-ordered arrays of metallic nanoparticles (NPs), and metallic nanovoids have been grown on porous silicon, defined by the morphology of this host material. SERS-active substrates based on porous silicon have been found to combine a high and well-reproducible signal level, storage stability, cost-effective technology and handy use. They make it possible to identify and study many compounds including biomolecules with a detection limit varying from milli- to femtomolar concentrations. The progress reviewed here demonstrates the great prospects for the extensive use of the metal-coated porous silicon for bioanalysis by SERS-spectroscopy.

Well Controlling of Plasmonic Features of Gold Nanoparticles on Macro Porous Silicon Substrate by HF Acid Concentration

In this work, we fabricated an efficient macroporous silicon/gold nanoparticles (macro psi/AuNPs) hybrid structure and how well controlling of plasmonic features on macro psi/AuNPs employs them for highly sensitive detection of the very low concentration of cyanine (Cy) dyes molecules. Macro-PSi was synthesized on n-type Si wafer with 3-10 Ω. cm resistivity and 100 orientation using Photo Electro Chemical Etching (PECE) process with630 nm illumination wavelength and 30 mW/cm² illumination intensity. The macroPSi /AuNPs hybrid structure substrates were prepared by simple and quick dipping process of macroPSi in tetrachloroauric gold solution HAuCl₄ with different concentrations of (10^-2  M, 10^-2 M diluted in 2.9  M of HF, 5 × 10^-3 M, and 5 × 10^-3 M diluted in 2.9 M of HF). Efficient surface-enhanced Raman scattering (SERS) signals was obtained from macroPSi/AuNPs substrates for Cy dye concentration of about 10^-6 and 10^-10 M. The detection method is dependent on a nanoparticles sizes process through controlling the concentration in a HAuCl₄ solution. Higher SERS signal was found for sample with lower salt concentration of 5 × 10^-3 M diluted in HF. The enhancement factors (EF) of Raman's signal increased four orders of magnitude by diluting the salt concentration. The values of EF in the range of 0.8 × 10^3-0.72 × 10⁷ were obtained by controlling the salt concentration from 10^-2 to 5 × 10^-3 diluted in HF acid.

Highly dispersed Ag nanoparticles embedded in alumina nanobelts as excellent surface-enhanced Raman scattering substrates

The Ag/Al₂O₃ composite nanobelts with nearly monodispersed Ag nanoparticles embedded in alumina nanobelts show excellent SERS performances for the R6G probe molecule.

Facile synthesis of spinous-like Au nanostructures for unique localized surface plasmon resonance and surface-enhanced Raman scattering

Spinous-like gold nanostructures were prepared using a wet chemistry method, and the intensities of the UV-Vis and SERS signals of the nanostructures were determined to be greatly enhanced by the presence of the spinous shapes.

Quantitative SERS detection of low-concentration aromatic polychlorinated biphenyl-77 and 2,4,6-trinitrotoluene

This paper reports a simple label-free high-sensitive method for detecting low-concentration persistent organic pollutants and explosive materials. The proposed method combines surface-enhanced Raman spectroscopy (SERS) and magnetomotive enrichment of the target molecules on the surface of Ag nanoparticles (NPs). This structure can be achieved through self-assembling integration of Ag NPs with ferromagnetic Fe3O4 microspheres, forming a hybrid SERS nanoprobe with both optical and magnetic properties. Moreover, the magnetic response of ferromagnetic Fe3O4 microspheres can be used to dynamically modulate the optical property of Ag NPs through controlling their geometric arrangement on the substrate by applying an external magnetic field. It is also demonstrated from the full-wave numerical simulation results that the maximum electromagnetic field enhancement can be greatly increased by shortening the distance of neighboring Ag NPs and therefore resulting in an improved SERS detecting limit. More importantly, by using the prepared substrate, the SERS signals from organic pollution substances, i.e. aromatic polychlorinated biphenyl-77 and 2,4,6-trinitrotoluene, were quantitatively analyzed.

High performance surface-enhanced Raman scattering via dummy molecular imprinting onto silver microspheres

A new strategy for achieving high performance SERS was proposed by using the dummy molecular imprinting technique.

Highly branched concave Au/Pd bimetallic nanocrystals with superior electrocatalytic activity and highly efficient SERS enhancement

Superstar: branched concave Au/Pd bimetallic nanocrystals were synthesized in high yield by seed-mediated co-reduction of Au and Pd metal precursors in an aqueous solution at room temperature. The branches are concave and have high-index facets on their surfaces. These nanocrystals show superior electrocatalytic activity for the oxidation of ethanol and highly efficient SERS enhancement.