Sequence-specific destabilization of azurin by tetramethylguanidinium-dipeptide ionic liquids

The thermal unfolding of the copper redox protein azurin was studied in the presence of four different dipeptide-based ionic liquids (ILs) utilizing tetramethylguanidinium as the cation. The four dipeptides have different sequences including the amino acids Ser and Asp: TMG-AspAsp, TMG-SerSer, TMG-SerAsp, and TMG-AspSer. Thermal unfolding curves generated from temperature-dependent fluorescence spectroscopy experiments showed that TMG-AspAsp and TMG-SerSer have minor destabilizing effects on the protein while TMG-AspSer and TMG-SerAsp strongly destabilize azurin. Red-shifted fluorescence signatures in the 25 °C correlate with the observed protein destabilization in the solutions with TMG-AspSer and TMG-SerAsp. These signals could correspond to interactions between the Asp residue in the dipeptide and the azurin Trp residue in the unfolded state. These results, supported by appropriate control experiments, suggest that dipeptide sequence-specific interactions lead to selective protein destabilization and motivate further studies of TMG-dipeptide ILs.

Synergy between silk fibroin and ionic liquids for active gas-sensing materials

Silk fibroin is a biobased material with excellent biocompatibility and mechanical properties, but its use in bioelectronics is hampered by the difficult dissolution and low intrinsic conductivity. Some ionic liquids are known to dissolve fibroin but removed after fibroin processing. However, ionic liquids and fibroin can cooperatively give rise to functional materials, and there are untapped opportunities in this combination. The dissolution of fibroin, followed by gelation, in designer ionic liquids from the imidazolium chloride family with varied alkyl chain lengths (2-10 carbons) is shown here. The alkyl chain length of the anion has a large impact on fibroin secondary structure which adopts unconventional arrangements, yielding robust gels with distinct hierarchical organization. Furthermore, and due to their remarkable air-stability and ionic conductivity, fibroin ionogels are exploited as active electrical gas sensors in an electronic nose revealing the unravelled possibilities of fibroin in soft and flexible electronics.

Textile Waste Fiber Regeneration via a Green Chemistry Approach: A Molecular Strategy for Sustainable Fashion

Fast fashion, as a continuously growing part of the textile industry, is widely criticized for its excessive resource use and high generation of textiles. To reduce its environmental impacts, numerous efforts are focused on finding sustainable and eco-friendly approaches to textile recycling. However, waste textiles and fibers are still mainly disposed of in landfills or by incineration after their service life and thereby pollute the natural environment, as there is still no effective strategy to separate natural fibers from chemical fibers. Herein, a green chemistry strategy is developed for the separation and regeneration of waste textiles at the molecular level. Cellulose/wool keratin composite fibers and multicomponent fibers are regenerated from waste textiles via a green chemical process. The strategy attempts to reduce the large amount of waste textiles generated by the fast-developing fashion industry and provide a new source of fibers, which can also address the fossil fuel reserve shortages caused by chemical fiber industries and global food shortages caused by natural fiber production.

Dissolution and processing of silk fibroin for materials science

In recent decades, silk fibroin (SF) from silkworm Bombyx mori has been extensively researched and applied in several fields, including: cosmetics, biomedicine and biomaterials. The dissolution and regeneration of SF fibers is the key and prerequisite step for the application of silk protein-based materials. Various solvents and dissolving systems have been reported to dissolve SF fibers. However, the dissolution process directly affects the characteristics of SF and particularly impacts the mechanical properties of the resulting silk biomaterials in subsequent processing. The purpose of this review is to summarize the common solvents, the dissolution methods for silk protein, the properties of the resulting SF protein. The suitable use of SF dissolved in the corresponding solvent was also briefly introduced. Recent applications of SF in various biomaterials are also discussed.

Engineering of sustainable biomaterial composites from cellulose and silk fibroin: Fundamentals and applications

This review addresses composites prepared from cellulose (Cel) and silk fibroin (SF) to generate multifunctional, biocompatible, biodegradable materials such as fibers, films and scaffolds for tissue engineering. First, we discuss briefly the molecular structures of Cel and SF. Their structural features explain why certain solvents, e.g., ionic liquids, inorganic electrolyte solutions dissolve both biopolymers. We discuss the mechanisms of Cel dissolution because in many cases they also apply to (much less studied) SF dissolution. Subsequently, we discuss the fabrication and characterization of Cel/SF composite biomaterials. We show how the composition of these materials beneficially affects their mechanical properties, compared to those of the precursor biopolymers. We also show that Cel/SF materials are excellent and versatile candidates for biomedical applications because of the inherent biocompatibility of their components.

Dissolution and regeneration of silk from silkworm Bombyx mori in ionic liquids and its application to medical biomaterials

The dissolution and regeneration of silk fibre have long been an issue for producers of silk. The high solubility of silk fibroin (SF) in ionic liquids (ILs) is a promising new avenue in silk dissolution and regeneration as it may allow for a significant reduction in operational steps required for SF regeneration and the subsequent formation of SF biomaterials. The regenerated SF solution can be prepared by dissolving directly SF in ILs without the tedious steps of degumming, dissolution and dialysis. Besides, the regenerated SF solution can simply form different SF biomaterials with the help of coagulant, and ILs can be separated from SF biomaterials easily during SF solidification. The goal of this work is to summarize the commonly used ILs for dissolving silk protein and their dissolution methods and to present the potential application of SF/ILs mixed solution in medical biomaterials.

Proteins in Ionic Liquids: Reactions, Applications, and Futures

Biopolymer processing and handling is greatly facilitated by the use of ionic liquids, given the increased solubility, and in some cases, structural stability imparted to these molecules. Focussing on proteins, we highlight here not just the key drivers behind protein-ionic liquid interactions that facilitate these functionalities, but address relevant current and potential applications of protein-ionic liquid interactions, including areas of future interest.

Preparation of natural amphoteric silk nanofibers by acid hydrolysis

Direct extraction of silk nanofibers (SNs) from natural silk fibers was developed via a low-intensity ultrasonic-assisted sulfuric acid hydrolysis process.

Ionic Liquid-Assisted Synthesis of Mesoporous Silk Fibroin/Silica Hybrids for Biomedical Applications

New mesoporous silk fibroin (SF)/silica hybrids were processed via a one-pot soft and energy-efficient sol-gel chemistry and self-assembly from a silica precursor, an acidic or basic catalyst, and the ionic liquid 1-butyl-3-methylimidazolium chloride, acting as both solvent and mesoporosity-inducer. The as-prepared materials were obtained as slightly transparent-opaque, amorphous monoliths, easily transformed into powders, and stable up to ca. 300 °C. Structural data suggest the formation of a hexagonal mesostructure with low range order and apparent surface areas, pore volumes, and pore radii of 205-263 m2 g-1, 0.16-0.19 cm3 g-1, and 1.2-1.6 nm, respectively. In all samples, the dominating conformation of the SF chains is the β-sheet. Cytotoxicity/bioactivity resazurin assays and fluorescence microscopy demonstrate the high viability of MC3T3 pre-osteoblasts to indirect (≥99 ± 9%) and direct (78 ± 2 to 99 ± 13%) contact with the SF/silica materials. Considering their properties and further improvements, these systems are promising candidates to be explored in bone tissue engineering. They also offer excellent prospects as electrolytes for solid-state electrochemical devices, in particular for fuel cells.

Fabrication of Biocompatible, Functional, and Transparent Hybrid Films Based on Silk Fibroin and Epoxy Silane for Biophotonics

In this work we explored the fabrication of flexible and transparent hybrids of silk fibroin (SF) and epoxy-modified siloxane for photonic applications. It is well-known that regenerated SF solutions can form free-standing films with high transparency. Although SF has a restricted number of chemically reactive side groups, the main issues of as-cast pristine SF films regard the high solubility into aqueous media, brittleness, and low thermal stability. The design of SF films with enhanced functionality but high transparency triggers new opportunities on a broader range of applications in biophotonics. Here we present a simple, functional, yet remarkably versatile hybrid material derived from silica sol-gel process based on SF protein and (3-glycidyloxypropyl)trimethoxysilane (GPTMS), an organically modified silicon-alkoxide owning a reactive terminal epoxy group. Specifically, we investigated the effect of the addition of GPTMS into SF solutions on the processability, morphology, crystallinity, and mechanical and optical properties of the resulting hybrid films. Highly transparent (ca. 90%) and flexible free-standing hybrid films were achieved. Cell viability assays revealed that the hybrid films are noncytotoxic to rat osteoblast cells even at high GPTMS content (up to 70 wt %). The hybrid films showed enhanced thermal stability and were rich in organic (epoxy) and inorganic (silanol) functional groups according to the content of GPTMS. We also evaluated the successful preparation of high-quality optical red emissive SF hybrid films by loading YVO₄:Eu³⁺ nanoparticles at low concentration (<5 wt %). A meaningful description of the hybrid film structure is reported from the combination of scanning electron and atomic force microscopies, vibrational spectroscopy, solid-state NMR, and X-ray diffraction analyses.

Structure–property relationships in protic ionic liquids: a thermochemical study

How does cation functionality influence the strength of intermolecular interactions in protic ionic liquids (PILs)? Quantifying the energetics of PILs can be an invaluable tool to answer this fundamental question.

Fabrication and characterization of Eri silk fibers-based sponges for biomedical application

Cocoon-derived semi-domesticated Eri silk fibers still lack exploitation for tissue engineering applications due to their poor solubility using conventional methods. The present work explores the ability to process cocoon fibers of non-mulberry Eri silk (Samia/Philosamia ricini) into sponges through a green approach using ionic liquid (IL)--1-buthyl-imidazolium acetate as a solvent. The formation of β-sheet structures during Eri silk/IL gelation was acquired by exposing the Eri silk/IL gels to a saturated atmosphere composed of two different solvents: (i) isopropanol/ethanol (physical stabilization) and (ii) genipin, a natural crosslinker, dissolved in ethanol (chemical crosslinking). The sponges were then obtained by freeze-drying. This approach promotes the formation of both stable and ordered non-crosslinked Eri silk fibroin matrices. Moreover, genipin-crosslinked silk fibroin sponges presenting high height recovery capacity after compression, high swelling degree and suitable mechanical properties for tissue engineering applications were produced. The incorporation of a model drug--ibuprofen--and the corresponding release study from the loaded sponges demonstrated the potential of using these matrices as effective drug delivery systems. The assessment of the biological performance of ATDC5 chondrocyte-like cells in contact with the developed sponges showed the promotion of cell adhesion and proliferation, as well as extracellular matrix production within 2 weeks of culture. Sponges' intrinsic properties and biological findings open up their potential use for biomedical applications.

STATEMENT OF SIGNIFICANCE

This work addresses the preparation and characterization of non-mulberry cocoon-derived Eri silk sponges. The insolubility of cocoons-derived non-mulberry silkworms impairs their processability and applications in the healthcare field. We used a green approach with ionic liquids to overcome the lack solubility of such silk fibers. The formation of beta-sheet structures into Eri-based sponges was physically and chemically induced. The sponges were obtained by freeze-drying. The developed structures exhibited flexibility to adapt and recover their shapes upon application and subsequent removal of load, high swelling degree, ability to load an anti-inflammatory drug and to promote its sustained release. They promoted in vitro cellular adhesion, proliferation and extracellular matrix production of a chondrocyte-like cell line, opening up their potential application for biomedical applications.

Electrostatic Forces Mediated by Choline Dihydrogen Phosphate Stabilize Collagen

Cross-linkers aid in improving biostability of collagen via different mechanisms. Choline dihydrogen phosphate (cDHP), a biocompatible ionic liquid, has been reported as a potential cross-linker for collagen. However, its mechanism is yet unclear. This study explores the effect of cDHP on the physicochemical stability of collagen and nature of its interaction. Dielectric behavior of collagen-cDHP composites signifies that cDHP enhances intermolecular forces. This was demonstrated by an increase in cross-linked groups and high denaturation temperature of collagen-cDHP composites. XRD measurements reveal minor conformational change in helices. Molecular modeling studies illustrate that the force existing between collagen and cDHP is electrostatic in nature. Herein, it is postulated that dihydrogen phosphate anion attaches to cationic functional groups of collagen, resulting in closer vicinity of various side chains of collagen, forming physical and chemical cross-links within collagen, contributing to its structural stability. Our study suggests that dihydrogen phosphate anions can be employed for developing a new class of biocompatible cross-linkers.

Regeneration of high-quality silk fibroin fiber by wet spinning from CaCl2-formic acid solvent

Silks spun by silkworms and spiders feature outstanding mechanical properties despite being spun under benign conditions. The superior physical properties of silk are closely related to its complicated hierarchical structures constructed from nanoscale building blocks, such as nanocrystals and nanofibrils. Here, we report a novel silk dissolution behavior, which preserved nanofibrils in CaCl2-formic acid solution, that enables spinning of high-quality fibers with a hierarchical structure. This process is characterized by simplicity, high efficiency, low cost, environmental compatibility and large-scale industrialization potential, as well as having utility and potential for the recycling of silk waste and the production of silk-based functional materials.

What Happens during Natural Protein Fibre Dissolution in Ionic Liquids

Here, we monitor the dissolution of several natural protein fibres such as wool, human hair and silk, in various ionic liquids (ILs). The dissolution of protein-based materials using ILs is an emerging area exploring the production of new materials from waste products. Wool is a keratin fibre, which is extensively used in the textiles industry and as a result has considerable amounts of waste produced each year. Wool, along with human hair, has a unique morphology whereby the outer layer, the cuticle, is heavily cross linked with disulphide bonds, whereas silk does not have this outer layer. Here we show how ILs dissolve natural protein fibres and how the mechanism of dissolution is directly related to the structure and morphology of the wool fibre.

Silk fibroin biomaterials for tissue regenerations

Regeneration of tissues using cells, scaffolds and appropriate growth factors is a key approach in the treatments of tissue or organ failure. Silk protein fibroin can be effectively used as a scaffolding material in these treatments. Silk fibers are obtained from diverse sources such as spiders, silkworms, scorpions, mites and flies. Among them, silk of silkworms is a good source for the development of biomedical device. It possesses good biocompatibility, suitable mechanical properties and is produced in bulk in the textile sector. The unique combination of elasticity and strength along with mammalian cell compatibility makes silk fibroin an attractive material for tissue engineering. The present article discusses the processing of silk fibroin into different forms of biomaterials followed by their uses in regeneration of different tissues. Applications of silk for engineering of bone, vascular, neural, skin, cartilage, ligaments, tendons, cardiac, ocular, and bladder tissues are discussed. The advantages and limitations of silk systems as scaffolding materials in the context of biocompatibility, biodegradability and tissue specific requirements are also critically reviewed.