A new method for synthesizing terminal olefins from esters using the Corey-Chaykovsky reagent

A new method for the synthesis of terminal olefins was developed through the reaction of the Corey-Chaykovsky reagent (dimethyl-sulfonium methylide) with readily available esters. After the domino process of nucleophilic addition, elimination and rearrangement in one pot, the terminal olefins were synthesized in high yields (up to 84%) under mild conditions. The synthetic method was well tolerated by many functional groups and a new route for the synthesis of various terminal olefin derivatives is provided. In the end, a possible reaction mechanism is proposed, which is supported by DFT calculations.

Electrochemical Decarboxylative Elimination of Carboxylic Acids to Alkenes

An electrochemical strategy for the decarboxylative elimination of carboxylic acids to alkenes at room temperature has been developed. This mild and oxidant-free method provides a green alternative to traditional thermal decarboxylation reactions. Structurally diverse aliphatic carboxylic acids, including biologically active drugs, underwent smooth conversion to the corresponding alkenes in good to excellent yields.

Direct synthesis of Fe-aluminosilicates from red mud for catalytic deoxygenation of waste cooking oil

Conversion of red mud (RM) that contains a high level of silica, alumina and iron minerals into heterogenous catalysts, offers a route for the utilization of abundant toxic by-products of bauxite refining. In this study, the conversion of red mud into mesoporous Fe-aluminosilicate produced selective catalysts for the deoxygenation of waste cooking oil to green diesel hydrocarbons. Direct conversion of red mud in the presence cetyltrimethylammonium bromide into Fe-aluminosilicate (RM-CTA) produced a highly mesoporous structure with oligomeric Fe2O3 clusters within the pores. When red mud was treated with citric acid (RM-CA-CTA), a wide distribution of Fe2O3 particles was obtained on the aluminosilicate external surface. TEM analysis showed a well-defined hexagonal mesoporosity of Fe-aluminosilicate obtained from untreated red mud, while the treated red mud produced lower regularity mesopores. RM-CTA exhibits 60% WCO conversion and 83.72% selectivity towards liquid products with 80.44% diesel hydrocarbon (C11-C18) yield. The high selectivity was due to the high acidity of Fe-aluminosilicate to dissociate the C-O bond and the regularity of mesostructure for efficient hydrocarbon diffusion, preventing a cracking reaction.

Scalable Electrochemical Decarboxylative Olefination Driven by Alternating Polarity

A mild, scalable (kg) metal-free electrochemical decarboxylation of alkyl carboxylic acids to olefins is disclosed. Numerous applications are presented wherein this transformation can simplify alkene synthesis and provide alternative synthetic access to valuable olefins from simple carboxylic acid feedstocks. This robust method relies on alternating polarity to maintain the quality of the electrode surface and local pH, providing a deeper understanding of the Hofer-Moest process with unprecedented chemoselectivity.

Copper-Catalyzed Decarboxylative Elimination of Carboxylic Acids to Styrenes

A copper-catalyzed decarboxylative elimination reaction of (hetero)aromatic propionic acids to vinyl (hetero)arenes has been developed. This method furnishes alkenes from carboxylic acids without the need for stochiometric Pb or Ag additives or expensive or specialized photocatalysts. A series of mechanistic experiments indicate that the reaction proceeds via benzylic deprotonation and subsequent radical decarboxylation; a pathway that is distinct from the single-electron-transfer mechanisms implicated in related decarboxylative elimination reactions.

Olefination via Cu-Mediated Dehydroacylation of Unstrained Ketones

The dehydroacylation of ketones to olefins is realized under mild conditions, which exhibits a unique reaction pathway involving aromatization-driven C-C cleavage to remove the acyl moiety, followed by Cu-mediated oxidative elimination to form an alkene between the α and β carbons. The newly adopted N'-methylpicolinohydrazonamide (MPHA) reagent is key to enable efficient cleavage of ketone C-C bonds at room temperature. Diverse alkyl- and aryl-substituted olefins, dienes, and special alkenes are generated with broad functional group tolerance. Strategic applications of this method are also demonstrated.

Enabling the Facile Synthesis of Arenes by Transition Metal Catalyzed Decarbonylation Methodology

Transition metal-catalyzed decarbonylation is an essential paradigm of synthetic organic chemistry. Decarbonylation offers a unique pathway to decoding the skeletal structure of arenes and enabling easy synthesis of structurally complicated molecules. Due to the omnipresence of carbonyl groups in a wide array of synthetically important complex molecules, the variety and scope of these transformations are enormous. As a result, the development of transition metal catalysts in such a simple decarbonylation reaction ranks among one of the most important topics in synthetic organic chemistry. Transition metals that have been employed range from 3d metals like V to second-row transition metals like Pd. The growing potential of this methodology has driven the pioneers of synthetic organic chemistry into delving into the details of this transition metal-catalyzed decarbonylation pathways. This review aims to take the readers through the employment of transition metals in various decarbonylation processes developed by our group, sticking not only to the scope and diversification of synthetically complex molecules, but also enabling the readers to understand the mechanistic insights, through computational and kinetic studies put forward in such reaction protocol, hoping to pave the way for future organic chemists to delve and hopefully solve the unique problems associated with this protocol.

Synthesis of Alpha Olefins: Catalytic Decarbonylation of Carboxylic Acids and Vegetable Oil Deodorizer Distillate (VODD)

Decarbonylation of carboxylic acids provides an effective protocol for producing alpha olefins; however, previous literature has focused on the palladium-bisphosphine catalysts and has only sporadically studied the palladium-monophosphine catalyst. To investigate the catalytic activity of the palladium-monophosphine catalyst on decarbonylation of carboxylic acids, new monophosphine ligands were synthesized (NP-1, NP-2, CP-1 and CP-2). By employing (1–3 mol%) palladium-naphthylphosphine catalysts, various carboxylic acids were converted into corresponding alpha alkenes with good yields and selectivity within a short period of time. Vegetable oil deodorizer distillate (VODD), which is a by-product from the vegetable oil refinery process, was found to be rich in free fatty acids and there is great interest in turning vegetable oil deodorizer distillate into value-added compounds. It is noteworthy that our catalytic system could be applied to convert vegetable oil deodorizer distillate (VODD) into diesel-like hydrocarbons in a good yield.

A donor-acceptor complex enables the synthesis of E-olefins from alcohols, amines and carboxylic acids

Olefins are prevalent substrates and functionalities. The synthesis of olefins from readily available starting materials such as alcohols, amines and carboxylic acids is of great significance to address the sustainability concerns in organic synthesis. Metallaphotoredox-catalyzed defunctionalizations were reported to achieve such transformations under mild conditions. However, all these valuable strategies require a transition metal catalyst, a ligand or an expensive photocatalyst, with the challenges of controlling the region- and stereoselectivities remaining. Herein, we present a fundamentally distinct strategy enabled by electron donor-acceptor (EDA) complexes, for the selective synthesis of olefins from these simple and easily available starting materials. The conversions took place via photoactivation of the EDA complexes of the activated substrates with alkali salts, followed by hydrogen atom elimination from in situ generated alkyl radicals. This method is operationally simple and straightforward and free of photocatalysts and transition-metals, and shows high regio- and stereoselectivities.

Organic synthesis with the most abundant transition metal–iron: from rust to multitasking catalysts

The promising aspects of iron in synthetic chemistry are being explored for three-four decades as a green and eco-friendly alternative to late transition metals. This present review unveils these rich iron-chemistry towards different transformations.

Heterogeneous Non-noble Catalyst for Highly Selective Production of Linear α-Olefins from Fatty Acids: A Discovery of NiFe/C

Catalytic deoxygenation of even-numbered fatty acids into odd-chain linear α-olefins (LAOs) has emerged as a complementary strategy to oligomerization of ethylene, which only affords even-chain LAOs. Although enzymes and homogeneous catalysts have shown promising potential for this application, industrial production of LAOs through these catalytic systems is still very difficult to accomplish to date. A recent breakthrough involves the use of an expensive noble-metal catalyst, Pd/C, through a phosphine ligands-assisted method for LAOs production from fatty acid conversion. This study presents a unique, cost-friendly, non-noble bimetallic NiFe/C catalyst for highly selective LAOs production from fatty acids through decarbonylative dehydration. In the presence of acetic anhydride and phosphine ligand, a remarkable improvement in the yield of 1-heptadecene from the conversion of stearic acid was found over the supported bimetallic catalyst (NiFe/C) as compared to corresponding monometallic counterparts (Ni/C and Fe/C). Through optimization of the reaction conditions, a 70.1 % heptadecene yield with selectivity to 1-heptadecene as high as 92.8 % could be achieved over the bimetallic catalyst at just 190 °C. This unique bimetallic NiFe/C catalyst is composed of NiFe alloy in the material bulk phase and a surface mixture of NiFe alloy and oxidized NiFe^δ+ species, which offer a synergized contribution towards decarbonylative dehydration of stearic acid for 1-heptadecene production.

A review of thermal homogeneous catalytic deoxygenation reactions for valuable products

To remove high oxygen content is important to make high quality oil and valuable products. In this paper, the research on homogeneous catalytic deoxygenation reactions, including decarboxylation (DCX)/decarbonylation (DCN), hydrodeoxygenation (HDO) is reviewed. Based on DCX/DCN, the classic radical reactions such as the Barton decarboxylation, Henkel, Hunsdiecker and Kochi reactions were introduced, the practice and overall performance are also discussed. In addition, the different reaction pathways and mechanisms were demonstrated and the key chemical processes have been selected from the literature as examples to elaborate the critical emphasis on the mechanistic understanding. The applications of the catalytic deoxygenation reactions for high-value products have also been highlighted. Overall, this review provides insight discussions on the DO issues and progresses in homogeneous catalytic aspects.

Benefit of a hemilabile ligand in deoxygenation of fatty acids to 1-alkenes

One of the most important tasks for chemistry in our time is to contribute to sustainable chemical production. A green industrial process for linear α-olefins, the arguably most important class of petrochemical intermediates, from renewable resources would be a major contribution to this end. Plant oils are attractive renewable feedstocks for this purpose because their triglycerides can be hydrolyzed to fatty acids that contain valuable long-chain hydrocarbons (C16-C22). These hydrocarbons may, in turn, be converted to α-olefins by the deoxygenation of the fatty acids. For the most selective of these deoxygenation reactions, transition-metal catalyzed decarbonylative dehydration, the density functional theory (DFT) calculations have just started to offer valuable mechanistic insight, and the use of this insight in rational catalyst design has been facilitated by the arrival of the first well-defined precatalyst for this reaction, Pd(cinnamyl)Cl(DPEphos) (1). Here, we present DFT calculations showing how, in 1, the hemilability of DPEphos, a classical P-O-P diphosphine, contributes to a low overall barrier and high α-selectivity. DPEphos facilitates decarbonylation by first switching from bidentate to monodentate binding to create a coordination site for CO. The recoordination of the dangling phosphine displaces the Pd-bound CO, a co-product that must leave the reactor for the reaction to proceed, and the escaping CO is here modelled using a low pressure in the calculation of its thermochemical corrections. Finally, the role of the hemilabile ligand suggests that further improvements in the decarbonylative dehydration of fatty acids to α-olefins might be achieved by exploring new, potentially asymmetric, hemilabile ligands.

Molecular mechanism comparison of decarbonylation with deoxygenation and hydrogenation of 5-hydroxymethylfurfural catalyzed by palladium acetate

The selective removal of oxygen from 5-hydroxymethylfurfural (HMF) is challenging for the effective utilization of biomass. The catalytic mechanisms of palladium acetate toward the conversion of HMF to furfuryl alcohol (FFA), 5-methylfurfural (5-MF) and 2,5-dihydroxymethyl furan (DHMF) have been theoretically investigated. The decarbonylation of HMF to FFA includes (i) migratory extrusion, (ii) metal-acetate-co-assisted deprotonation, (iii) decarbonylation, (iv) metal-assisted deprotonation, and (v) migratory extrusion and catalyst regeneration. Both hydrogenation and deoxidation of HMF with HCOOH as the H-source involve (i) migratory extrusion, (ii) oxidative addition, (iii) reductive elimination, (iv) metal-assisted deprotonation, and (v) migratory extrusion and catalyst regeneration. The C-H bond cleavage is the crucial reaction step, in which the metal-acetate-co-assisted deprotonation is kinetically more preferable than the oxidative addition. Both FFA and DHMF are kinetically superior to 5-MF. In terms of selectivity, increasing the temperature is beneficial to decarbonylation and decreasing the temperature is advantageous to hydrogenation. The present finding provides molecular-level insight into the functions of both the metal-center and coordinated-ligand in the Pd(OAc)2 catalyst, which may drive the novel design of catalytic systems toward both decarbonylation and hydrogenation reactions.

Mechanistic study of the ceria supported, re-catalyzed deoxydehydration of vicinal OH groups

Deoxydehydration (DODH) is an emerging biomass deoxygenation process whereby vicinal OH groups are removed.

Synthesis of perinaphthenones through rhodium-catalyzed dehydrative annulation of 1-naphthoic acids with alkynes

A convenient method for the synthesis of perinaphthenones via rhodium-catalyzed dehydrative annulation of naphthoic acids with alkynes, which gave good to high yields of perinaphthenones, was developed.

Dual-catalytic decarbonylation of fatty acid methyl esters to form olefins

The homogeneous dehydrative decarbonylation of fatty acid methyl esters (FAMEs) to form olefins is reported.

Amines as effective ligands in iridium-catalyzed decarbonylative dehydration of biosourced substrates

Linear α-olefins (LAOs) and linear internal olefins (LIOs) are essential intermediates in the synthesis of surfactants, lubricants, and polymers.

Transition-metal-catalyzed decarbonylation of carboxylic acids to olefins: exploiting acyl C–O activation for the production of high value products

In this article, we review the recent developments in the transition-metal-catalyzed decarbonylation of carboxylic acids to produce olefins by the formal acyl C–O activation mechanism and discuss future challenges in this field.

Selective production of linear α-olefins via catalytic deoxygenation of fatty acids and derivatives

Various homogeneous, heterogeneous, and enzyme catalysis strategies for the selective synthesis of linear α-olefins from fatty acids and their derivatives are reviewed.

Decarboxylation of Fatty Acids with Triruthenium Dodecacarbonyl: Influence of the Compound Structure and Analysis of the Product Mixtures

Recently, the decarboxylation of oleic acid (9(Z)-octadecenoic acid) catalyzed by triruthenium dodecacarbonyl, Ru₃(CO)₁₂, to give a mixture of heptadecenes with concomitant formation of other hydrocarbons, heptadecane and C17 alkylbenzenes, was reported. The product mixture, consisting of about 77% heptadecene isomers, 18% heptadecane, and slightly >4% C17 alkylbenzenes, possesses acceptable diesel fuel properties. This reaction is now applied to other fatty acids of varying chain length and degree of saturation as well as double-bond configuration and position. Acids beyond oleic acid included in the present study are lauric (dodecanoic), myristic (tetradecanoic), palmitic (hexadecanoic), stearic (octadecanoic), petroselinic (6(Z)-octadecenoic), elaidic (9(E)-octadecenoic), asclepic (11(Z)-octadecenoic), and linoleic (9(Z),12(Z)-octadecadienoic) acids. Regardless of the chain length and degree of unsaturation, a similar product mixture was obtained in all cases with a mixture of alkenes predominating. Monounsaturated fatty acids, however, afforded the alkane with one carbon less than the parent fatty acid as the most prominent component in the mixture. Alkylbenzenes with one carbon atom less than the parent fatty acid were also present in all product mixtures. The number of isomeric alkenes and alkylbenzenes depends on the number of carbons in the chain of the parent fatty acid. With linoleic acid as the starting material, the amount of alkane was reduced significantly with alkenes and alkylaromatics enhanced compared to the monounsaturated fatty acids. Two alkenes, 9(E)-tetradecene and 1-hexadecene, were also studied as starting materials. A similar product mixture was observed but with comparatively minor amount of alkane formed and alkene isomers dominating at almost 90%. The double-bond position and configuration in the starting material do not influence the pattern of alkene isomers in the product mixture. The results underscore the multifunctionality of the Ru₃(CO)₁₂ catalyst, which promotes a reaction sequence including decarboxylation, isomerization, desaturation, hydrogenation, and cyclization (aromatization) to give a mixture of hydrocarbons simulating petrodiesel fuels. A reaction pathway is proposed to explain the existence of these products, in which alkenes are dehydrogenated to alkadienes and then, under cyclization, to the observed alkylaromatics. The liberated hydrogen can then saturate alkenes to the corresponding alkane.

Photobiocatalytic decarboxylation for olefin synthesis

The oxidative decarboxylation of fatty acids to terminal alkenes was accomplished with high selectivity by combining a fatty acid decarboxylase OleT_JE with the light-catalyzed generation of the cosubstrate hydrogen peroxide, resulting in a simple and efficient system for the light-driven cleavage of C–C bonds.

Olefins from biomass feedstocks: catalytic ester decarbonylation and tandem Heck-type coupling

Catalytic method employs “masked” carboxylic acids to yield alkenes, via decarbonylation and/or C–C coupling of activated esters.