Electrochemiluminescence Analysis of Multiple Glycans on Single Living Cell with a Closed Bipolar Electrode Array Chip

The profiling of multiple glycans on a single cell is important for elucidating glycosylation mechanisms and accurately identifying disease states. Herein, we developed a closed bipolar electrode (BPE) array chip for live single-cell trapping and in situ galactose and sialic acid detection with the electrochemiluminescence (ECL) method. Methylene blue-DNA (MB-DNA) as well as biotin-DNA (Bio-DNA) codecorated AuNPs were prepared as nanoprobes, which were selectively labeled on the cell surface through chemoselective labeling techniques. The individual cell was captured and labeled in the microtrap of the cathodic chamber, under an appropriate potential, MB molecules on the cellular membrane underwent oxidation, triggering the reduction of [Ru(bpy)3]2+/TPA and consequently generating ECL signals in the anodic chamber. The abundance of MB groups on the single cell enabled selective monitoring of both sialic acid and galactosyl groups with high sensitivity using ECL. The sialic acid and galactosyl content per HepG2 cell were detected to be 0.66 and 0.82 fmol, respectively. Through comprehensive evaluation of these two types of glycans on a single cell, tumor cells, and normal cells could be effectively discriminated and the accuracy of single-cell heterogeneous analysis was improved. Additionally, dynamic monitoring of variations in galactosyl groups on the surface of the single cell was also achieved. This work introduced a straightforward and convenient approach for heterogeneity analysis among single cells.

Self-powered molecular imprinted photoelectrochemical sensing platform of sialic acid employing WO3/Bi2S3 photoanode and CuInS2 photocathode

A dual-photoelectrode molecular imprinted photoelectrochemical (PEC) sensor is first built for the determination of sialic acid (SA) without additional energy supply. Specifically, WO₃/Bi₂S₃ heterojunction behaves as a photoanode to provide amplified and stable photocurrent for the PEC sensing platform, which is attributed to the matched energy levels of WO₃ and Bi₂S₃ promoting the electron transfer and improving photoelectric conversion properties. CuInS₂ micro-flowers functionalized by molecularly imprinted polymers (MIPs) are served as photocathode to recognize SA, avoiding the deficiency of high production cost and poor stability from biological enzymes, aptamers, or antigen-antibodies. The inherent deviation between the Fermi level of the photoanode and the photocathode guarantees a spontaneous power supply for the PEC system. Benefiting from the photoanode and recognition elements, the as-fabricated PEC sensing platform has a strong anti-interference ability and high selectivity. Moreover, the PEC sensor displays a wide linear range of 1 nM-100 μM and a low detection limit of 7.1 × 10^-10 M (S/N = 3) based on the relationship between photocurrent signal and SA concentration. Accordingly, this research provides a new and valuable approach to detecting various molecules.

Electrofluorochromic Imaging Analysis of Glycan Expression on Living Single Cell with Bipolar Electrode Arrays

The in situ glycan profiling of a single tumor cell plays an important role in personalized cancer treatment. Herein, an integrated microfluidic system was designed for living single-cell trapping and real-time monitoring of galactosyl expression on the surface, combining closed bipolar electrode (BPE) arrays and electrofluorochromic (EFC) imaging. Galactosyl groups on human liver cancer HepG2 cells were used as the model analysts, galactose oxidase (GAO) could selectively oxidize hydroxyl sites of galactosyl groups on the cell surface to aldehydes, and then biotin hydrazide (BH) was used to label the aldehydes by aniline-catalyzed hydrazone ligation. With the biotin-avidin system, nanoprobes were finally introduced to the galactosyl groups on the cell surface with avidin as a bridge, which was prepared by simultaneously assembling ferrocene-DNA (Fc-DNA) and biotin-DNA (Bio-DNA) on gold nanoparticles (AuNPs) due to their large surface area and excellent electrical conductivity. After a labeled single cell was captured in the anodic microchannel, the Fc groups attached on the cell surface were oxidized under suitable potential, and the nonfluorescent resazurin on the cathode was correspondingly reduced to produce highly fluorescent resorufin, collected by fluorescence confocal microscope. The combination of EFC imaging and BPE realized monitoring galactosyl group expression of 5.0 × 10⁸ molecules per cell. Furthermore, the proposed platform had the ability to distinguish a single cancer cell from a normal cell according to the expression level of galactosyl groups and to dynamically monitor the galactosyl group variation on the cell surface, providing a simple and accessible method for the single-cell analysis.

Rolling "wool-balls": rapid live-cell mapping of membrane sialic acids via poly-p-benzoquinone/ethylenediamine nanoclusters

Here, we report a convenient, fast labeling strategy for the imaging of cell surface sialic acids (SAs, nine-carbon monosaccharides located at the terminals of cell surface sugar chains). This strategy is based on the synthesis of sticky, furry and fluorescent "wool-balls", which are wound into nanoclusters from p-benzoquinone/ethylenediamine polymer "wires". With abundant amino groups at the surface, the wool-balls can easily stick to the C-7 aldehyde group generated at the ends of periodate treated SAs in less than 30 min.

Potentiometric analysis of sialic acid with a flexible carbon cloth based on boronate affinity and molecularly imprinted polymers

A potentiometric sensor for sialic acid detection was designed based on a boronic acid-containing MIP modified carbon cloth electrode.

Recent Chemical Biology Approaches for Profiling Cell Surface Sialylation Status

Sialic acids (SAs) often exist as the terminal sugars of glycans of either glycoproteins or glycolipids on the cell surface and thus are directly involved in biological processes, such as cell-cell, cell-ligand, and cell-pathogen interactions. Cell surface SA expression levels and their linkages are collectively termed cell surface sialylation status, which represent varying cellular states and contribute to the overall functionality of a cell. Accordingly, systemic and specific profiling of the cell surface sialyation status is critical in deciphering the structures and functions of cell surface glycoconjugates and the molecular mechanisms of their underlying biological processes. In recent decades, several advanced chemical biology approaches have been developed to profile the cell surface sialyation status of both in vitro and in vivo samples, including metabolic labeling, direct chemical modification, and boronic acid coupling approaches. Various investigative technologies have also been explored for their unique competence, including fluorescent imaging, flow cytometry, Raman imaging, magnetic resonance imaging (MRI), and matrix-assisted laser desorption ionization imaging mass spectrometry. In particular, the sialylation status of a specific glycoprotein on the cell surface has been investigated. This review highlights the recent advancements in chemical biology approaches for profiling cell surface sialyation status. It is expected that this review will provide researchers different choices for both biological and biomedical research and applications.

Multiplexed ratiometric photoluminescent detection of pyrophosphate using anisotropic boron-doped nitrogen-rich carbon rugby ball-like nanodots

B-doped N-rich carbon rugby ball-like nanodots have been synthesized by a heterophase polymerization route and can act not only as a ratiometric sensor for Hg²⁺ but also as a dual-mode PPi-selective sensor.

Design of carbohydrate/electron-transfer peptides for human histocytic lymphoma cell sensing

A carbohydrate/electro-transfer peptide probe was fabricated to perform cell sensing. The probe consisted of a cello-oligosaccharide that was created by the conjugation of an electron-transfer peptide (Y₅C) and a carbohydrate via a Schiff base. An oxidation wave due to a phenolic hydroxyl group was obtained by scanning with a glassy carbon electrode. This cell-sensing system was based on a competitive reaction between carbohydrates on a cell surface and the probe as each reacted to a protein that recognized the carbohydrate. When amounts of the protein and probe were constant, the peak current of the probe was changed as the number of cells increased. A human histocytic lymphoma cell (U937 cell) with carbohydrates such as glucose and N-acetylglucosamine on its surface was selected as the target cell. Wheat germ agglutinin (WGA) binded to both the probe and the carbohydrates on U937 cells, which resulted in a linear peak current of the cellobiose/electron-transfer peptide at concentrations that ranged from 100 to 3500 cells/ml. The values of the cell sensing using this electrochemical method were consistent with those established via ELSIA. The sensitivity of this procedure, however, was two-fold superior to that of ELISA. Consequently, this carbohydrate/electron-transfer peptide could be a powerful tool for cell sensing and searching for carbohydrate chains on a cell surface.

Boronic Acid vs. Folic Acid: A Comparison of the bio-recognition performances by Impedimetric Cytosensors based on Ferrocene cored dendrimer

A comparative study is reported where folic acid (FA) and boronic acid (BA) based cytosensors and their analytical performances in cancer cell detection were analyzed by using electrochemical impedance spectroscopy (EIS) method. Cytosensors were fabricated using self-assembled monolayer principle by modifying Au electrode with cysteamine (Cys) and immobilization of ferrocene cored polyamidiamine dendrimers second generation (Fc-PAMAM (G2)), after which electrodes were modified with FA and BA. Au/Fc-PAMAM(G2)/FA and Au/Fc-PAMAM(G2)/BA based cytosensors showed extremely good analytical performances in cancer cell detection with linear range of 1×10² to 1×10⁶cellsml^-1, detection limit of 20cellsml^-1 with incubation time of 20min for FA based electrode, and for BA based electrode detection limit was 28cellsml^-1 with incubation time of 10min. Next to excellent analytical performances, cytosensors showed high selectivity towards cancer cells which was demonstrated in selectivity study using human embryonic kidney 293 cells (HEK 293) as normal cells and Au/Fc-PAMAM(G2)/FA electrode showed two times better selectivity than BA modified electrode. These cytosensors are promising for future applications in cancer cell diagnosis.

Erythrocytes-based quartz crystal microbalance cytosensor for in situ detection of cell surface sialic acid

Erythrocytes-based quartz crystal microbalance cytosensor forin situdetection of cell surface sialic acid using AuNPs/APBA signal amplification nanoprobe.

Highly sensitive detection of cancer cells with an electrochemical cytosensor based on boronic acid functional polythiophene

The detection of cancer cells through important molecular recognition target such as sialic acid is significant for the clinical diagnosis and treatment. There are many electrochemical cytosensors developed for cancer cells detection but most of them have complicated fabrication processes which results in poor reproducibility and reliability. In this study, a simple, low-cost, and highly sensitive electrochemical cytosensor was designed based on boronic acid-functionalized polythiophene. In cytosensors fabrication simple single-step procedure was used which includes coating pencil graphite electrode (PGE) by means of electro-polymerization of 3-Thienyl boronic acid and Thiophen. Electrochemical impedance spectroscopy and cyclic voltammetry were used as an analytical methods to optimize and measure analytical performances of PGE/P(TBA_0.5Th_0.5) based electrode. Cytosensor showed extremely good analytical performances in detection of cancer cells with linear rage of 1×10¹ to 1×10⁶ cellsmL^-1 exhibiting low detection limit of 10 cellsmL^-1 and incubation time of 10min. Next to excellent analytical performances, it showed high selectivity towards AGS cancer cells when compared to HEK 293 normal cells and bone marrow mesenchymal stem cells (BM-hMSCs). This method is promising for future applications in early stage cancer diagnosis.

Versatile aptasensor for electrochemical quantification of cell surface glycan and naked-eye tracking glycolytic inhibition in living cells

Quantifying the glycan expression status on cell surfaces is of vital importance for insight into the glycan function in biological processes and related diseases. Here we developed a versatile aptasensor for electrochemical quantification of cell surface glycan by taking advantage of the cell-specific aptamer, and the lectin-functionalized gold nanoparticles acting as both a glycan recognition unit and a signal amplification probe. To construct the aptasensor, amine-functionalized mucin 1 protein (MUC1) aptamer was first covalently conjugated to carboxylated-magnetic beads (MBs) using the succinimide coupling (EDC-NHS) method. On the basis of the specific recognition between aptamer and MUC1 protein that overexpressed on the surface of MCF-7 cells, the aptamer conjugated MBs showed a predominant capability for cell capture with high selectivity. Moreover, a lectin-based nanoprobe was designed by noncovalent assembly of concanavalin A (ConA) on gold nanoparticles (AuNPs). This nanoprobe incorporated the abilities of both the specific carbohydrate recognition and the signal amplification based on the gold-promoted reduction of silver ions. By coupling with electrochemical stripping analysis, the proposed sandwich-type cytosensor showed an excellent analytical performance for the ultrasensitive detection of MCF-7 cells and quantification of cell surface glycan. More importantly, taking advantage of Con A-gold nanoprobe catalyzed silver enhancement, the proposed method was further used for naked-eye tracking glycolytic inhibition in living cells. This aptasensor holds great promise as a new point-of-care diagnostic tool for analyzing glycan expression on living cells and further helps cancer diagnosis and treatment.

Structure, Properties, Functionalization, and Applications of Carbon Nanohorns

Carbon nanohorns (sometimes also known as nanocones) are conical carbon nanostructures constructed from an sp(2) carbon sheet. Nanohorns require no metal catalyst in their synthesis, and can be produced in industrial quantities. They provide a realistic and useful alternative to carbon nanotubes, and possibly graphene, in a wide range of applications. They also have their own unique behavior due to their specific conical morphology. However, their research and development has been slowed by several factors, notably during synthesis, they aggregate into spherical clusters ∼100 nm in diameter, blocking functionalization and treatment of individual nanocones. This limitation has recently been overcome with a new approach to separating these "dahlia-like" clusters into individual nanocones. In this review, we describe the structure, synthesis, and topology of carbon nanohorns, and provide a detailed review of nanohorn chemistry.

Boronic acid recognition based-gold nanoparticle-labeling strategy for the assay of sialic acid expression on cancer cell surface by inductively coupled plasma mass spectrometry

Sialic acids are special sugars widely expressed at the termini of glycan chains on the cell surface, and their expression level on the cancer cell surface is much higher than on the normal cell surface.

Chemoselective hydroxyl group transformation: an elusive target

The selective reaction of one functional group in the presence of others is not a trivial task. A noteworthy amount of research has been dedicated to the chemoselective reaction of the hydroxyl moiety. This group is prevalent in many biologically important molecules including natural products and proteins. However, targeting the hydroxyl group is difficult for many reasons including its relatively low nucleophilicity in comparison to other ubiquitous functional groups such as amines and thiols. Additionally, many of the developed chemoselective reactions cannot be used in the presence of water. Despite these complications, chemoselective transformation of the hydroxyl moiety has been utilized in the synthesis of complex natural product derivatives, the reaction of tyrosine residues in proteins, the isolation of natural products and is the mechanism of action of myriad drugs. Here, methods for selective targeting of this group, as well as applications of several devised methods, are described.