Hydrophobic binary mixtures containing amphotericin B as lipophilic solutions for the treatment of cutaneous leishmaniasis

Cutaneous leishmaniasis, caused by Leishmania parasites, requires treatments with fewer side effects than those currently available. The development of a topical solution based on amphotericin B (AmB) was pursued. The considerable interest in deep eutectic solvents (DESs) and their remarkable advantages inspired the search for a suitable hydrophobic excipient. Various mixtures based on commonly used hydrogen bond donors (HBDs) and acceptors (HBAs) for DES preparations were explored. Initial physical and in-vitro screenings showed the potential of quaternary phosphonium salt-based mixtures. Through thermal analysis, it was determined that most of these mixtures did not exhibit eutectic behavior. X-ray scattering studies revealed a sponge-like nanoscale structure. The most promising formulation, based on a combination of trihexyl(tetradecyl)phosphonium chloride and 1-oleoyl-rac-glycerol, showed no deleterious effects through histological evaluation. AmB was fully solubilized at concentrations between 0.5 and 0.8 mg·mL-1, depending on the formulation. The monomeric state of AmB was observed by circular dichroism. In-vitro irritation tests demonstrated acceptable viability for AmB-based formulations up to 0.5 mg·mL-1. Additionally, an ex-vivo penetration study on pig ear skin revealed no transcutaneous passage, confirming AmB retention in healthy, unaffected skin.

Bulk Nanostructure of Mixtures of Choline Arginate, Choline Lysinate, and Water

Neutron diffraction with empirical potential structure refinement was used to investigate the bulk liquid nanostructure of mixtures of choline arginate (Ch[Arg]), choline lysinate (Ch[Lys]), and water at mole ratios of 1Ch[Arg]:1Ch[Lys]:6H2O (balanced), 1Ch[Arg]:1Ch[Lys]:20H2O (balanced dilute), 3Ch[Arg]:1Ch[Lys]:12H2O (Arg- rich), and 1Ch[Arg]:3Ch[Lys]:12H2O (Lys- rich). The Arg- and Lys- anions tend not to associate due to electrostatic repulsion between charge groups and weak anion-anion attractions. This means that the local ion structures around the anions in these mixtures resemble the parent single-component systems. The bulk liquid nanostructure varies with the Arg-:Lys- ratio. In the Lys--rich mixture (1Ch[Arg]:3Ch[Lys]:12H2O), Lys- side chains cluster into a continuous apolar domain separated from a charged domain of polar groups. In the balanced mixture (1Ch[Arg]:1Ch[Lys]:6H2O), Lys- side chains form discrete apolar aggregates within a continuous polar domain of Arg-, Ch+, and water, and in the Arg--rich mixture (3Ch[Arg]:1Ch[Lys]:12H2O), the distribution of Lys- and Arg- is nearly homogeneous. Finally, in the balance dilute system (1Ch[Arg]:1Ch[Lys]:20H2O), a percolating water domain forms.

The Coiling Effect in Ether Ionic Liquids: Exploiting Acetate as a Probe for Transport Properties and Microenvironment Analysis

The inherently high viscosity of ionic liquids (ILs) can limit their potential applications. One approach to address this drawback is to modify the cation side chain with ether groups. Herein, we assessed the structure-property relationship by focusing on acetate (OAc), a strongly coordinating anion, with 1,3-dialkylimidazolium cations with different side chains, including alkyl, ether, and hydroxyl functionalized, as well as their combinations. We evaluated their viscosity, thermal stabilities, and microstructure using Raman and infrared (IR) spectroscopies, allied to density functional theory (DFT) and ab initio molecular dynamics (AIMD) simulations. The viscosity data showed that the ether insertion significantly enhances the fluidity of the ILs, consistent with the coiling effect of the cation chain. Through a combined experimental and theoretical approach, we analyzed how the OAc anion interacts with ether ILs, revealing a characteristic bidentate coordination, particularly in hydroxyl functionalized ILs due to specific hydrogen bonding with the OH group. IR spectroscopy showed subtle shifts in the acidic hydrogens of imidazolium ring C(2)-H and C(4,5)-H, suggesting weaker interactions between OAc and the imidazolium ring in ether-functionalized ILs. Additionally, spatial distribution functions (SDF) and dihedral angle distribution obtained via AIMD confirmed the intramolecular hydrogen bonding due to the coiling effect of the ether side chain.

Harnessing the Hybridization of a Metal-Organic Framework and Superbase-Derived Ionic Liquid for High-Performance Direct Air Capture of CO2

Direct air capture (DAC) of CO2 has emerged as the most promising "negative carbon emission" technologies. Despite being state-of-the-art, sorbents deploying alkali hydroxides/amine solutions or amine-modified materials still suffer from unsolved high energy consumption and stability issues. In this work, composite sorbents are crafted by hybridizing a robust metal-organic framework (Ni-MOF) with superbase-derived ionic liquid (SIL), possessing well maintained crystallinity and chemical structures. The low-pressure (0.4 mbar) volumetric CO2 capture assessment and a fixed-bed breakthrough examination with 400 ppm CO2 gas flow reveal high-performance DAC of CO2 (CO2 uptake capacity of up to 0.58 mmol g-1 at 298 K) and exceptional cycling stability. Operando spectroscopy analysis reveals the rapid (400 ppm) CO2 capture kinetics and energy-efficient/fast CO2 releasing behaviors. The theoretical calculation and small-angle X-ray scattering demonstrate that the confinement effect of the MOF cavity enhances the interaction strength of reactive sites in SIL with CO2 , indicating great efficacy of the hybridization. The achievements in this study showcase the exceptional capabilities of SIL-derived sorbents in carbon capture from ambient air in terms of rapid carbon capture kinetics, facile CO2 releasing, and good cycling performance.

Room temperature ionic liquids with two symmetric ions

Room temperature ionic liquids typically contain asymmetric organic cations. The asymmetry is thought to enhance disorder, thereby providing an entropic counter-balance to the strong, enthalpic, ionic interactions, and leading, therefore, to lower melting points. Unfortunately, the synthesis and purification of such asymmetric cations is typically more demanding. Here we introduce novel room temperature ionic liquids in which both cation and anion are formally symmetric. The chemical basis for this unprecedented behaviour is the incorporation of ether-containing side chains - which increase the configurational entropy - in the cation. Molecular dynamics simulations indicate that the ether-containing side chains transiently sample curled configurations. Our results contradict the long-standing paradigm that at least one asymmetric ion is required for ionic liquids to be molten at room temperature, and hence open up new and simpler design pathways for these remarkable materials.

Anion and ether group influence in protic guanidinium ionic liquids

Ionic liquids are attractive liquid materials for many advanced applications. For targeted design, in-depth knowledge about their structure-property-relations is urgently needed. We prepared a set of novel protic ionic liquids (PILs) with a guanidinium cation with either an ether or alkyl side chain and different anions. While being a promising cation class, the available data is insufficient to guide design. We measured thermal and transport properties, nuclear magnetic resonance (NMR) spectra as well as liquid and crystalline structures supported by ab initio computations and were able to obtain a detailed insight into the influence of the anion and the ether substitution on the physical and spectroscopic properties. For the PILs, hydrogen bonding is the main interaction between cation and anion and the H-bond strength is inversely related to the proton affinity of the constituting acid and correlated to the increase of ¹H and ¹⁵N chemical shifts. Using anions from acids with lower proton affinity leads to proton localization on the cation as evident from NMR spectra and self-diffusion coefficients. In contrast, proton exchange was evident in ionic liquids with triflate and trifluoroacetate anions. Using imide-type anions and ether side groups decreases glass transitions as well as fragility, and accelerated dynamics significantly. In case of the ether guanidinium ionic liquids, the conformation of the side chain adopts a curled structure as the result of dispersion interactions, while the alkyl chains prefer a linear arrangement.

Physical Properties and Low-Frequency Polarizability Anisotropy and Dipole Responses of Phosphonium Bis(fluorosulfonyl)amide Ionic Liquids with Pentyl, Ethoxyethyl, or 2-(Ethylthio)ethyl Group

This study compared the physical properties, e.g., glass transition temperature, melting point, viscosity, density, surface tension, and electrical conductivity, and the low-frequency spectra under 200 cm^-1 of three synthesized ionic liquids (ILs), triethylpentylphosphonium bis(fluorosulfonyl)amide ([P₂₂₂₅][NF₂]), ethoxyethyltriethylphosphonium bis(fluorosulfonyl)amide ([P_222(2O2)][NF₂]), and triethyl[2-(ethylthio)ethyl]phosphonium bis(fluorosulfonyl)amide ([P_222(2S2)][NF₂]), at various temperatures using femtosecond Raman-induced Kerr effect spectroscopy (fs-RIKES) and terahertz time-domain spectroscopy (THz-TDS). The [P_222(2S2)][NF₂] had the highest viscosity and glass transition temperature, whereas the [P_222(2O2)][NF₂] had the lowest. Among the three ILs, the [P_222(2S2)][NF₂] had the highest density and surface tension, and the [P_222(2O2)][NF₂] had the highest electrical conductivity. The RIKES and THz-TDS spectral line shapes for the three ILs varied significantly. For the [P₂₂₂₅][NF₂], molecular dynamics simulations successfully reproduced the line shapes of the experimental spectra and indicated that the RIKES spectrum was mainly due to the cation and cross-term and their rotational motions, whereas the THz-TDS spectrum was mainly due to the anion and its translational motion. This shows that it is desirable to utilize both fs-RIKES and THz-TDS methods to reveal molecular motions at the low-frequency domain. The [P_222(2S2)][NF₂] had higher frequency peaks and broader bands in the low-frequency spectra via fs-RIKES and THz-TDS than those for the [P₂₂₂₅][NF₂] and [P_222(2O2)][NF₂].

Influence of alkali metals on water dynamics inside imidazolium-based ionic liquid nano-domains

The global need to expand the design of energy-storage devices led to the investigation of alkali metal - Ionic Liquid (IL) mixtures as a possible class of electrolytes. In this study, 1D and 2D Nuclear Magnetic Resonance (NMR) and Electrochemical Impedance Spectroscopy (EIS) as well as Molecular Dynamics (MD) simulations were used to study the intermolecular interactions in imidazolium-based IL - water - alkali halide ternary mixtures. The 1H and 23Na 1D and 1H DOSY NMR spectra revealed that the presence of small quantities of NaCl does not influence the aggregation of water molecules in the IL nano-domains. The order of adding ionic compounds to water, as well as the certain water and NaCl molecular ratios, lead to the formation of isolated water clusters. Two ternary solutions representing different orders of compounds mixing (H2O+ IL + NaCl or H2O+ NaCl + IL) showed a strong dependence of the initial solvation shell of Na+ and the self-clustering of water. Furthermore, the behaviour of water was found to be independent from the conditions applied during the solution preparation, such as temperature and/or duration of stirring and aging. These findings could be confirmed by large differences in the amount of ionic species, observed in the ternary solutions and depending on the order of mixing/solute preparation.

An Overview of Structure and Dynamics Associated with Hydrophobic Deep Eutectic Solvents and Their Applications in Extraction Processes

Recent development of novel water-immiscible green solvents known as hydrophobic deep eutectic solvents (HDESs) has opened the gates for applications requiring media where presence of water is undesirable. Ever since they were prepared, researchers have used HDESs in diverse fields such as extraction processes, CO 2 sequestration, membrane formation, and catalysis. The microstructure and dynamics associated with the species comprising HDESs guide their suitability for specific applications. For example, varying the alkyl tail length of HDES components significantly affects the dynamics of the components and thus helps in tuning the efficiency of extraction processes. The development of HDESs is still in infancy and very few theoretical studies are available in the literature that help in understanding the structure and dynamics of HDESs. This review highlights the recent work focused on the microscopic structure and dynamics of HDESs and their potential applications, particularly in extraction processes. We have also provided a glimpse of how the integration of experiments and computational techniques can help understand the mechanism of extraction processes.

O2 solvation cavity in voids of ionic liquids studied by the solvatochromic red shift of O2(1Δg) phosphorescence

Phosphorescence spectroscopy of singlet oxygen [=O₂(¹Δ_g)] was applied to study the solvation properties of small solute molecule, O₂, in ionic liquids. Unlike conventional molecular solvents, the spectral red shift of the O₂(¹Δ_g) phosphorescence in ionic liquids from the gas phase was found to depend not only on the refractive index of solvents but also on the vdW volume of anions. This unusual spectral shift of the O₂(¹Δ_g) luminescence is interpreted by considering the size of solvation cavities in voids, which is estimated by analyzing the free volume in ionic liquids. These results suggest the potential of the O₂(¹Δ_g) phosphorescence spectral shift measurement in the study of molecular-scale voids in ionic liquids.

Curled cation structures accelerate the dynamics of ionic liquids

Ionic liquids are modern liquid materials with potential and actual implementation in many advanced technologies. They combine many favourable and modifiable properties but have a major inherent drawback compared to molecular liquids - slower dynamics. In previous studies we found that the dynamics of ionic liquids are significantly accelerated by the introduction of multiple ether side chains into the cations. However, the origin of the improved transport properties, whether as a result of the altered cation conformation or due to the absence of nanostructuring within the liquid as a result of the higher polarity of the ether chains, remained to be clarified. Therefore, we prepared two novel sets of methylammonium based ionic liquids; one set with three ether substituents and another set with three butyl side chains, in order to compare their dynamic properties and liquid structures. Using a range of anions, we show that the dynamics of the ether-substituted cations are systematically and distinctly accelerated. Liquefaction temperatures are lowered and fragilities increased, while at the same time cation-anion distances are slightly larger for the alkylated samples. Furthermore, pronounced liquid nanostructures were not observed. Molecular dynamics simulations demonstrate that the origin of the altered properties of the ether substituted ionic liquids is primarily due to a curled ether chain conformation, in contrast to the alkylated cations where the alkyl chains retain a linear conformation. Thus, the observed structure-property relations can be explained by changes in the geometric shape of the cations, rather than by the absence of a liquid nanostructure. Application of quantum chemical calculations to a simplified model system revealed that intramolecular hydrogen-bonding is responsible for approximately half of the stabilisation of the curled ether-cations, whereas the other half stems from non-specific long-range interactions. These findings give more detailed insights into the structure-property relations of ionic liquids and will guide the development of ionic liquids that do not suffer from slow dynamics.

Structure-Property Relation of Trimethyl Ammonium Ionic Liquids for Battery Applications

Ionic liquids are attractive and safe electrolytes for diverse electrochemical applications such as advanced rechargeable batteries with high energy densities. Their properties that are beneficial for energy storage and conversion include negligible vapor-pressure, intrinsic conductivity as well as high stability. To explore the suitability of a series of ionic liquids with small ammonium cations for potential battery applications, we investigated their thermal and transport properties. We studied the influence of the symmetrical imide-type anions bis(trifluoromethanesulfonyl)imide ([TFSI]−) and bis(fluorosulfonyl)imide ([FSI]−), side chain length and functionalization, as well as lithium salt content on the properties of the electrolytes. Many of the samples are liquid at ambient temperature, but their solidification temperatures show disparate behavior. The transport properties showed clear trends: the dynamics are accelerated for samples with the [FSI]− anion, shorter side chains, ether functionalization and lower amounts of lithium salts. Detailed insight was obtained from the diffusion coefficients of the different ions in the electrolytes, which revealed the formation of aggregates of lithium cations coordinated by anions. The ionic liquid electrolytes exhibit sufficient stability in NMC/Li half-cells at elevated temperatures with small current rates without the need of additional liquid electrolytes, although Li-plating was observed. Electrolytes containing [TFSI]− anions showed superior stability compared to those with [FSI]− anions in battery tests.

Targeted modifications in ionic liquids - from understanding to design

Ionic liquids are extremely versatile and continue to find new applications in academia as well as industry. This versatility is rooted in the manifold of possible ion types, ion combinations, and ion variations. However, to fully exploit this versatility, it is imperative to understand how the properties of ionic liquids arise from their constituents. In this work, we discuss targeted modifications as a powerful tool to provide understanding and to enable design. A 'targeted modification' is a deliberate change in the structure of an ionic liquid. This includes chemical changes in an experiment as well as changes to the parameterisation in a computer simulation. In any case, such a change must be purposeful to isolate what is of interest, studying, as far as is possible, only one concept at a time. The concepts can then be used as design elements. However, it is often found that several design elements interact with each other - sometimes synergistically, and other times antagonistically. Targeted modifications are a systematic way of navigating these overlaps. We hope this paper shows that understanding ionic liquids requires experimentalists and theoreticians to join forces and provides a tool to tackle the difficult transition from understanding to design.

Heterogeneity in hydrophobic deep eutectic solvents: SAXS prepeak and local environments

The observation of the prepeak in the simulated total X-ray scattering structure function (S(q)) reveals the presence of intermediate-range structural heterogeneity in hydrophobic deep eutectic solvents.

Microstructural and Dynamical Heterogeneities in Ionic Liquids

Ionic liquids (ILs) are a special category of molten salts solely composed of ions with varied molecular symmetry and charge delocalization. The versatility in combining varied cation-anion moieties and in functionalizing ions with different atoms and molecular groups contributes to their peculiar interactions ranging from weak isotropic associations to strong, specific, and anisotropic forces. A delicate interplay among intra- and intermolecular interactions facilitates the formation of heterogeneous microstructures and liquid morphologies, which further contributes to their striking dynamical properties. Microstructural and dynamical heterogeneities of ILs lead to their multifaceted properties described by an inherent designer feature, which makes ILs important candidates for novel solvents, electrolytes, and functional materials in academia and industrial applications. Due to a massive number of combinations of ion pairs with ion species having distinct molecular structures and IL mixtures containing varied molecular solvents, a comprehensive understanding of their hierarchical structural and dynamical quantities is of great significance for a rational selection of ILs with appropriate properties and thereafter advancing their macroscopic functionalities in applications. In this review, we comprehensively trace recent advances in understanding delicate interplay of strong and weak interactions that underpin their complex phase behaviors with a particular emphasis on understanding heterogeneous microstructures and dynamics of ILs in bulk liquids, in mixtures with cosolvents, and in interfacial regions.

The Effect of Phenyl Substitutions on Microstructures and Dynamics of Tetraalkylphosphonium Bis(trifluoro- methylsulfonyl)imide Ionic Liquids

Extensive atomistic simulations demonstrated that a gradual substitution of hexyl chains with phenyl groups in tetraalkylphosphonium cations results in remarkable changes in hydrogen bonding interactions, liquid structures and scattering structural functions, and rotational dynamics of hexyl chains and phenyl groups in tetraalkylphosphonium bis(trifluoromethylsulfonyl)imide ionic liquids. Hydrogen donor sites in hexyl chains present competitive characteristics with those in phenyl groups in coordinating anions, as well as their continuous and intermittent hydrogen bonding dynamics. Cation-cation and anion-anion spatial correlations show concomitant shift to short distances with decreased peak intensities with variations of cation structures, whereas cation-anion correlations have a distinct shift to large radial distances due to decreased associations of anions with neighboring cations. These microstructural changes are qualitatively manifested in shifts of prominent peaks for prevalent charge alternations and adjacency correlations between ion species in scattering structural functions. Meanwhile, rotational dynamics of hexyl chains speed up, which, in turn, slow down rotations of phenyl groups, whereas anions exhibit imperceptible changes in their rotational dynamics. These computational results are intrinsically correlated with conformational flexibilities, molecular sizes, and steric hindrance effects of phenyl groups in comparison with hexyl chains, and constrained distributions of anions around cations in heterogeneous ionic environments.

Heterogeneity in the microstructure and dynamics of tetraalkylammonium hydroxide ionic liquids: insight from classical molecular dynamics simulations and Voronoi tessellation analysis

Microscopic structural and dynamic heterogeneities were investigated for three ionic liquids (ILs), tetraethylammonium hydroxide, tetrapropylammonium hydroxide, and tetrabutylammonium hydroxide employing classical molecular dynamics (MD) simulations.

Structural analysis of ionic liquids with symmetric and asymmetric fluorinated anions

Ionic liquids (ILs) with relatively low viscosities and broad windows of electrochemical stability are often constructed by pairing asymmetric cations with bisfluorosulfonylimide (FSI^-) or bistriflimide (NTf₂ ^-) anions. In this work, we systematically studied the structures of ILs with these anions and related perfluorobis-sulfonylimide anions with asymmetry and/or longer chains: (fluorosulfonyl)(trifluoromethylsulfonyl)imide (BSI_0,1 ^-), bis(pentafluoroethylsulfonyl)imide (BETI^-), and (trifluoromethylsulfonyl) (nonafluorobutylsulfonyl)imide (BSI_1,4 ^-) using high energy X-ray scattering and molecular dynamics simulation methods. 1-alkyl-3-methylimidazolium cations with shorter (ethyl, Im_2,1 ⁺) and longer (octyl, Im_1,8 ⁺) hydrocarbon chains were selected to examine how the sizes of nonpolar hydrocarbon and fluorous chains affect IL structures and properties. In comparison with these, we also computationally explored the structure of ionic liquids with anions having longer fluorinated tails.

Coupled hydroxyl and ether functionalisation in EAN derivatives: the effect of hydrogen bond donor/acceptor groups on the structural heterogeneity studied with X-ray diffractions and fixed charge/polarizable simulations

We present a study by energy-dispersive X-ray diffraction of liquid 2-(2-hydroxyethoxy)ethan-1-ammonium nitrate, NH₃CH₂CH₂(OCH₂CH₂OH)⁺NO₃^- (22HHEAN). This ionic liquid is derived from the parent ethylammonium nitrate (EAN) with an ether link in the chain and a hydroxyl group in the terminal position. The absence of peaks at low-q values in the experimental diffraction curve indicates that the added polar groups and the high conformational isomerism of the cations alter strongly the nanosegregation of the parent EAN liquid. Aggregation between ionic species may involve hydrogen bonding between cations and anions and a variety of intermolecular hydrogen bonds between cations. Diffraction patterns are compared with the results of molecular dynamics simulations with two different force fields: the fixed point charge force field (GAFF) with different charge scaling protocols and the polarizable AMOEBA force field. Most point charge models lead to the appearance of a quite evident low q-peak which decreases gradually, when the percentage and type of the scaling (uniform vs. non-uniform) are increased. In the polarisable model and in the model where only anion charges are scaled to 20%, instead, the pre-peak is absent in agreement with our experiments.

High throughput approach to investigating ternary solvents of aqueous non-stoichiometric protic ionic liquids

The use of ionic liquids (ILs) is limited for many applications due to their cost and/or viscosity. An efficient solution is to make mixtures of ILs with molecular solvents. However, it is well known that there are a large number of possible cation and anion combinations resulting in ILs, and this becomes a vast number when these are then combined with a molecular solvent. Therefore, we need structure-property relationships to design new IL-molecular solvent systems. In this work we have applied high throughput methods to investigate IL containing solutions to provide systematic data of a broad compositional space. We have principally focused on the surface tension, apparent pH and liquid nanostructure to identify potential self-assembly and protein stabilizing ability of solvent systems. Non-stoichiometric and aqueous IL-solvents were prepared in a high-throughput manner based on a deliberate experimental design approach such that 26 samples were prepared for each cation-anion-water combination. A selection of 8 protic ionic liquids (PILs) were used as starting materials, comprising ethanol-, ethyl-, butyl-, and pentylammonium cations combined with formate, acetate and nitrate anions. This resulted in a total of 208 different solvent systems. The measured solvent properties showed different trends in base-rich and acid-rich solvent combinations. Surface tensions of base-rich samples exhibited a relatively linear relationship with increasing excess amine, while acid-rich samples were more dominantly affected by the change in water content. Liquid nanostructure of acid-rich samples was retained upon water dilution, whereas a significant SAXS peak shift towards lower scattering angles was observed in the presence of excess amines, indicating larger nanosized aggregates were forming. The design of experiment approach used here is considered to be applicable to any multi-component solvent compositional space due to its suitability in using small data sets to cover large compositional spaces, and hence can be employed to decrease the time and sample quantities required.

Structural correlations tailor conductive properties in polymerized ionic liquids

In this paper, it was demonstrated that the mobile ion (anion) size and pendant group chemistry affect the packing of the polymer chains and influence conductivity in imidazolium based PolyILs.

Structural analysis of zwitterionic liquids vs. homologous ionic liquids

Zwitterionic liquids (Zw-ILs) have been developed that are homologous to monovalent ionic liquids (ILs) and show great promise for controlled dissolution of cellulosic biomass. Using both high energy X-ray scattering and atomistic molecular simulations, this article compares the bulk liquid structural properties for novel Zw-ILs with their homologous ILs. It is shown that the significant localization of the charges on Zw-ILs leads to charge ordering similar to that observed for conventional ionic liquids with monovalent anions and cations. A low-intensity first sharp diffraction peak in the liquid structure factor S(q) is observed for both the Zw-IL and the IL. This is unexpected since both the Zw-IL and IL have a 2-(2-methoxyethoxy)ethyl (diether) functional group on the cationic imidazolium ring and ether functional groups are known to suppress this peak. Detailed analyses show that this intermediate range order in the liquid structure arises for slightly different reasons in the Zw-IL vs. the IL. For the Zw-IL, the ether tails in the liquid are shown to aggregate into nanoscale domains.

Choline-amino acid ionic liquids: past and recent achievements about the structure and properties of these really "green" chemicals

The structure of choline-amino acid ionic liquids, atoxic task-specific solvents composed of materials originated from renewable feedstocks, is reviewed in this letter. The varied and strong interactions that these liquids are capable of establishing are largely dependent on their structure and confer them outstanding solvating properties with respect to a large number of different solutes. Among the experimental methods capable of yielding structural insight, the energy-dispersive version of X-Ray diffraction, that uses the Bremsstrahlung radiation of the X-Ray tube, is a technique very well suited to investigate these liquid systems. The diffraction spectra of five choline-amino acid ionic liquids, recently measured, are reported and discussed; in particular, the presence or absence of the medium-range order pre-peak is related to the presence of polar groups within the amino acid side chain that destroys the hydrophobic interactions between aliphatic chains. In the final section, a recent example of choline-amino acid ionic liquids as for ancient paper preservation and two other interesting results are discussed at the end.

Nanosegregation and Structuring in the Bulk and at the Surface of Ionic-Liquid Mixtures

Ionic-liquid (IL) mixtures hold great promise, as they allow liquids with a wide range of properties to be formed by mixing two common components rather than by synthesizing a large array of pure ILs with different chemical structures. In addition, these mixtures can exhibit a range of properties and structural organization that depend on their composition, which opens up new possibilities for the composition-dependent control of IL properties for particular applications. However, the fundamental properties, structure, and dynamics of IL mixtures are currently poorly understood, which limits their more widespread application. This article presents the first comprehensive investigation into the bulk and surface properties of IL mixtures formed from two commonly encountered ILs: 1-ethyl-3-methylimidazolium and 1-dodecyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C₂mim][Tf₂N] and [C₁₂mim][Tf₂N]). Physical property measurements (viscosity, conductivity, and density) reveal that these IL mixtures are not well described by simple mixing laws, implying that their structure and dynamics are strongly composition dependent. Small-angle X-ray and neutron scattering measurements, alongside molecular dynamics (MD) simulations, show that at low mole fractions of [C₁₂mim][Tf₂N], the bulk of the IL is composed of small aggregates of [C₁₂mim]⁺ ions in a [C₂mim][Tf₂N] matrix, which is driven by nanosegregation of the long alkyl chains and the polar parts of the IL. As the proportion of [C₁₂mim][Tf₂N] in the mixtures increases, the size and number of aggregates increases until the C12 alkyl chains percolate through the system and a bicontinuous network of polar and nonpolar domains is formed. Reactive atom scattering-laser-induced fluorescence experiments, also supported by MD simulations, have been used to probe the surface structure of these mixtures. It is found that the vacuum-IL interface is enriched significantly in C12 alkyl chains, even in mixtures low in the long-chain component. These data show, in contrast to previous suggestions, that the [C₁₂mim]⁺ ion is surface active in this binary IL mixture. However, the surface does not become saturated in C12 chains as its proportion in the mixtures increases and remains unsaturated in pure [C₁₂mim][Tf₂N].

Mesoscopic organization in ionic liquids

We discuss some published results and provide new observations concerning the high level of structural complexity that lies behind the nanoscale correlations in ionic liquids (ILs) and their mixtures with molecular liquids. It turns out that this organization is a consequence of the hierarchical construction on both spatial (from ångström to several nanometer) and temporal (from fraction of picosecond to hundreds of nanosecond) scales, which requires joint use of experimental and computational tools.

Emerging Evidences of Mesoscopic-Scale Complexity in Neat Ionic Liquids and Their Mixtures

Ionic liquids (ILs) represent a blooming class of continuously developing advanced materials, with the aiming of a green chemical industry. Their appealing physical and chemical properties are largely influenced by their micro- and mesoscopic structure that is known to possess a high degree of hierarchical organization. High-impact application fields are largely affected by the complex morphology of neat ionic liquids and their mixtures. This Perspective highlights new arising research directions that point to an enhanced level of structural complexity in several IL-based systems, including mixtures. The latter represent a change in paradigm in the approach to formulate new, task-specific IL-based media, and the reported phenomenology has the potential to further expand their range of applications by calling for a revisitation of the nature of interactions in these exciting media.

Mode-coupling theoretical study on the roles of heterogeneous structure in rheology of ionic liquids

Theoretical calculations of the rheological properties of coarse-grained model ionic liquids were performed using mode-coupling theory. The nonpolar part of the cation was systematically increased in order to clarify the effects of the heterogeneous structure on shear viscosity. The shear viscosity showed a minimum as the function of the size of the nonpolar part, as had been reported in literatures. The minimum was ascribed to the interplay between the increase in the shear relaxation time and the decrease in the high-frequency shear modulus with increasing the size of the nonpolar part of the cation. The ionic liquids with symmetric charge distribution of cations were less viscous than those with asymmetric cations, which is also in harmony with experiments. The theoretical analysis demonstrated that there are two mechanisms for the higher viscosity of the asymmetric model. The first one is the direct coupling between the domain dynamics and the shear stress. The second one is that the microscopic dynamics within the polar domain is retarded due to the nonlinear coupling with the heterogeneous structure.