Interrogating the nature of aggregates formed in a model azine based ESIPT coupled AIE active probe: stark differences in photodynamics in the solid state and aggregates in water

A novel Schiff base 4-bromo-2-((E)-((E)-(1-(naphthalen-2-yl)ethylidene)hydrazono)methyl)phenol (BNHMP) was synthesized and characterized by NMR, ESI-MS, FTIR and single crystal X-ray diffraction studies. In the solution phase, BNHMP shows prominent emission from the keto-form, a consequence of excited state intramolecular proton transfer (ESIPT). The quantum yield and excited state lifetime decrease in polar solvent THF compared to relatively non-polar solvent DCM. Interestingly, in aqueous solution (pH 7.0), the quantum yield along with the excited state lifetime undergoes tremendous increment. Dynamic light scattering experiments and FESEM reveal the formation of aggregates in water as reflected by the increased hydrodynamic radius of BNHMP in water. Hence, aqueous phase studies revealed BNHMP to be an AIE active probe. On the other hand, BNHMP shows huge emission intensity in the solid state. Interestingly, the emission decay behavior of BNHMP changes upon excitation, as BNHMP shows very broad absorption in the solid state. Upon excitation at 360 nm, a triexponential decay pattern is found, which changes to a biexponential one upon excitation at 450 nm. Meticulous analysis of the fluorescence lifetimes led to the assignment of J and H aggregates coexisting in the solid state with the former dominating the photodynamics. A judicious comparison of the lifetime behavior in the solid state to that in water leads to the conclusion that BNHMP undergoes AIE by the formation of J and H aggregates to an equal extent, a phenomenon starkly different from the solid-state scenario. The current results hold significance as this is among a few reports where such comprehensive spectrodynamic dissection has been performed for an ESIPT-AIE active Schiff base in solution as well as in the solid phase, thereby giving a holistic vision of the nature and fate of aggregation occurring in such azine based systems and subsequently advancing the understanding of such systems in terms of their photo behavior.

Hydrogen bond regulated hydrogen sulfate ion recognition: an overview

Hydrogen sulfate possesses substantial biological importance, having a colossal impact on physiological and environmental events. Therefore, several scientific groups have devoted serious effort to the development of versatile colorimetric and fluorimetric HSO4- sensors. Along with the scope, challenges, and significance, this review emphasizes the advancement of the optical recognition of HSO4- based on hydrogen bonding during the past two decades. Moreover, hydrogen-bond-driven proton transfer, ESIPT, ICT, PET, CHEF, and TBET mechanisms that allow for the optical detection of HSO4- are also discussed concisely. The foundation of this review includes the key points of the sensing process, like the nature of spectroscopic changes, selectivity and sensitivity, naked-eye color changes, the reusability of sensors, and the in vivo detection of HSO4-, if any. Special attention is focused on the correlation between the photophysical changes and the underlying interaction mechanisms that triggered the recognition aspect.

Estimation of bisulfate in edible plant foods, dog urine, and drugs: picomolar level detection and bio-imaging in living organisms

In order to explore the properties of any species in solution, the actual, i.e. equilibrium concentration of the free species should be taken into account. Researchers have not paid attention to the deprotonation equilibrium between HSO4- and SO42- while probing bisulfate ion. In this study, we have addressed this concern and developed two zwitterions, CG (coumarin-integrated glycine) and CA (coumarin-integrated alanine), for the selective detection of HSO4- at a picomolar level (50 to 325 pM) with very high binding affinity (∼108 M-1) in pure water at physiological pH. The principle of HSO4- recognition was established via UV-vis and fluorescence techniques. DFT calculations suggested that the H-bonding interactions between the probes and HSO4- are the driving force for this unforeseen selectivity. The membrane penetration ability and nontoxicity of CG/CA enable them to function as staining agents in living brine shrimps and bacteria. The use of these probes for the estimation of HSO4- in various day-to-day edible foods and drugs along with urine samples is unprecedented. The significance and novelty of this study lies in the application and development of assays for estimating bisulfate in several real-world samples that are predominantly aqueous in nature, which are the first of their kind.

A simple benzimidazole styryl-based colorimetric chemosensor for dual sensing application

A new colorimetric styryl-benzimidazole based receptor to recognize more than one analyte trans-2-[4'-(dimethylamino)styryl]benzimidazole) (L1) has been synthesized and fully characterized by ¹³C and ¹H NMR, elemental analysis, UV-vis spectroscopy, and HRMS. Investigation of sensing ability of receptor L1 was carried out in presence of multiple anions (Br^-, CN^-, Cl^-, ClO₄^-, F^-, HSO₄^-, PF₆^-, NO₃^-, S^2-, OH^-, AcO^- and H₂PO₄^-) and cations (Cu²⁺, Cr³⁺, Al³⁺, Mg²⁺, Cd²⁺, Ni²⁺, Fe³⁺, K⁺, Fe²⁺, Mn²⁺, Ag⁺, Hg²⁺, Ca²⁺, Co²⁺, Pb²⁺, Na⁺, and Zn²⁺) by using UV-vis spectroscopy. Receptor L1 showed colorimetric response towards only for HSO₄^- ion. Receptor L1-HSO₄^- interaction confirmed with the help of ¹H NMR titration. Among various cations, L1 selectively sense the Cu²⁺ and Al³⁺ with the drastic colour change from yellow to green and dark yellow respectively. The stoichiometric binding ratio of L1 with HSO₄^-, Cu²⁺, and Al³⁺ found to be 1:1 by jobs method and HRMS data proved the complex formation between L1 and Cu²⁺/Al³⁺ with very low detection limit. In addition to explore practical applicability of L1, paper strips have been made and used to detect HSO₄^- and Cu²⁺ ions, respectively, up to 10 ppm level.

An easy-to-synthesize multi-photoresponse smart sensor for rapidly detecting Zn2+ and quantifying Fe3+ based on the enol/keto binding mode

A readily available salicylaldazine-modified fluorene Schiff base (EASA-F) exhibits fast fluorescent OFF–ON response to Zn²⁺ and OFF–ON–OFF behavior to Fe³⁺ synchronously accompanied the diverse absorption-ratiometric and colorimetric changes.

A selective hydrolytic and restructuring approach through a Schiff base design on a coumarin platform for “turn-on” fluorogenic sensing of Zn2+

The designed molecular probe, CMD, undergoes Zn²⁺ triggered restructuring and shows a fluorescence change in only 30 seconds. The LOD was found to be of sub-nanomolar level.

Rapid detection of HSO4- in water: Novel immobilized azo-azomethine colorimetric anion receptors on solid supports

The immobilized azo-azomethine receptors on amorphous SiO₂, S-B, SiO₂ nanoparticles, S-NPs, and NaY zeolite, S-ZY, have been prepared and applied as solid phase sensors for detection of HSO₄^-, over other interfering anions, in 100% aqueous media. Remarkably, S-B and S-ZY show unique and rapid sensitivity towards HSO₄^-, which could it easily visualized through naked eye detection even at 5×10^-4molL^-1 and 4×10^-4molL^-1, respectively. The fabricated solid phase sensors were characterized using powder XRD diffraction, TGA-DTA, FE-SEM and also FT-IR techniques. Moreover, the related molecular anion receptor, HL, has been prepared and used for naked eye detection of F^- and AcO^-, in dry DMSO. The anions recognition ability of HL was also evaluated using UV-Vis and ¹H NMR spectroscopic methods.

Synthesis of N-acetyl-l-cysteine capped Mn:doped CdS quantum dots for quantitative detection of copper ions

In this work, a new assembled copper ions sensor based on the Mn metal-enhanced fluorescence of N-acetyl-l-cysteine protected CdS quantum dots (NAC-Mn:CdS QDs) was developed. The NAC and Mn:CdS QDs nanoparticles were assembled into NAC-Mn:CdS QDs complexes through the formation of CdS and MnS bonds. As compared to NAC capped CdS QDs, higher fluorescence quantum yields of NAC-Mn:CdS QDs was observed, which is attributed to the surface plasmon resonance of Mn metal. In addition, the fluorescence intensity of as-formed complexes weakened in the presence of copper ions. The decrease in fluorescence intensity presented a linear relationship with copper ions concentration in the range from 0.16-3.36μM with a detection limit of 0.041μM . The characterization of as-formed QDs was analyzed by photoluminescence (PL), ultra violet-visible (UV-vis), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and energy dispersive spectroscopy (EDS) respectively. Furthermore, the recoveries and relative standard deviations of Cu²⁺ spiked in real water samples for the intra-day and inter-day analyses were 88.20-117.90, 95.20-109.90, 0.80-5.80 and 1.20-3.20%, respectively. Such a metal-enhanced QDs fluorescence system may have promising application in chemical and biological sensors.

A fluorescence turn-on chemosensor for hydrogen sulfate anion based on quinoline and naphthalimide

A new fluorescence turn-on chemosensor 1 based on quinoline and naphthalimide was prepared and its anion sensing toward various anions behavior was explored in this paper. Sensor 1 exhibited a highly selective fluorescent response toward HSO4(-) with an 8-fold fluorescence intensity enhancement in the presence of 10equiv. of HSO4(-) in DMSO-H2O (1/1, v/v) solution. The sensor also displayed high sensitivity to hydrogen sulfate and the detection limit was calculated to be 7.79×10(-7)M. The sensing mechanism has been suggested to proceed via a hydrolysis process of the Schiff base group. The hydrolysis product has been isolated and further identified by (1)H NMR and MS.

Harvesting red fluorescence through design specific tuning of ICT and ESIPT: an efficient optical detection of cysteine and live cell imaging

In this work, a 2-(2-hydroxyphenyl)benzothiazole (HBT)-based ratiometric fluorescent probe exhibiting coupling between the ICT and ESIPT mechanisms was exploited for the optical sensing of cysteine and successfully utilised in the bio-imaging of cysteine in HeLa cells.

Fluorescence Chemosensor for HSO4 (-) Ion Based on Pyrrole-Substituted Salicylimine Zn (2+) Complex: Nanomolar Detection

A novel pyrrole-substituted salicylimine zinc (II) ion complex has been synthesized and evaluated its anion binding affinity. The probe 4 has high selectivity for HSO4 (-) over other anions in CH3OH:H2O (70:30, v/v) solvent system. The emission intensity of 4 was quenched upon addition of HSO4 (-). The probe 4 is highly selective for HSO4 (-) with a detection limit of 40 nm. Photoinduced electron transfer (PET) is responsible for observed change. The binding affinity of 4 for HSO4 (-) was further authenticated through ratiometric change in absorbance profile.

A radical approach for fluorescent turn ‘on’ detection, differentiation and bioimaging of methanol

A Schiff base (RC) is presented herein as a smart fluorescent material for the selective detection and bioimaging of methanol. The key step behind same involves methanol induced opening of the cyclic control unit ofRCresulting in the formation of a highly fluorescent moiety,RO.

A water soluble copper(ii) complex as a HSO4− ion selective turn-on fluorescent sensor applicable in living cell imaging

A water soluble non-fluorescent biofriendly cell permeable structurally characterised copper(ii) complex (1) selectively senses HSO₄⁻ ions as low as 3.18 × 10⁻⁷ M in water : DMSO (9 : 1, v/v) HEPES buffer at biological pH.

A bio-attuned ratiometric hydrogen sulfate ion selective receptor in aqueous solvent: structural proof of the H-bonded adduct

A new cell permeable quinazoline based receptor (1) behaves as a highly selective chemosensor for HSO₄⁻ ions at nanomolar concentration in aqueous medium by formation of the adduct [LHSO₄]⁻LH⁺·3H₂O confirmed by single crystal X-ray crystallography.

A remarkable effect of N,N-diethylamino functionality on the optoelectronic properties of a salicylimine-based probe for Al(3+)

A new live-cell permeable, fluorescent probe comprised of a simple salicylimine-based Schiff base (SA1) has been developed for Al3+ with nano-molar sensitivity in aqueous media. SA1 was synthesized through a simple structural modification of a recently reported receptor SA2 by the incorporation of the N,Ndiethylamino (DEA) group as a fine controllable unit. This modification affects the performance of SA1 remarkably in terms of its sensitivity, water compatibility and efficiency as well as its mechanistic aspect. The presence of the DEA group in SA1 led to its dual channel emission due to the TICT state and at the same time its hydrophobic nature was also responsible for controlling the strong hydration of Al3+ ions in aqueous media which ultimately led to the high sensitivity of SA1 for Al3+. The structure of SA1 was confirmed by single crystal X-ray diffraction and its binding with Al3+ was studied in detail using UVvisible, fluorescence and 1H NMR spectral studies along with mass determination. The effort of getting a single crystal of Al3+–SA1 led to single crystals of Cl−/NO3 − complexes of protonated SA1 which were fully characterized by their XRD studies.

A new pyrene-based Schiff-base: a selective colorimetric and fluorescent chemosensor for detection of Cu(II) and Fe(III)

A new receptor 1 was prepared, for the detection of Cu2+ and Fe3+ in solutions as a colorimetric and fluorescent sensor, respectively. Receptor 1 shows highly selective and sensitive recognition toward Cu2+ and Fe3+ by naked eye UV-Vis and fluorescent color changes in aqueous solution (DMSO/H2O=8/2, v/v), respectively. The sensitivity toward Cu2+ or Fe3+ was not interfered with by the presence of other metal ions such as Mg2+, Cd2+, Ag+, Zn2+, Ni2+, Co2+, Mn2+, Cr3+, Ca2+, Na+, Pb2+, K+, Fe2+, Li+ and Hg2+ ions. Receptor 1 can be used for semi-quantitative recognition of Cu2+ ions at ppm level. The fluorescence microscopy experiments showed that the receptor is efficient for detection of Fe3+ in vitro, developing a good image of the biological organelles.

A new selective colorimetric and fluorescent chemodosimeter for HSO4(-) based on hydrolysis of Schiff base

Two new receptors 1 and 2 were prepared, and their chromogenic and fluorogenic behaviors toward various anions were investigated. Receptors 1 and 2 show exclusive response toward HSO4(-) ion and also distinguish HSO4(-) from other anions by different color changes in aqueous solution (CH3CN/H2O=4/1, v/v). Between them receptor 1 selectively exhibits a pronounced HSO4(-)-induced fluorescence enhancement. The detection limit for the HSO4(-) ion was determined as (0.24±0.03μM). Thus, the receptor 1 can be used as a colorimetric and fluorescent sensor for the determination of HSO4(-) ion. The sensing mechanism has been suggested to proceed via a hydrolysis process. The hydrolysis product has been isolated and further identified by (1)H NMR spectroscopy, ESI-MS analysis and X-ray diffraction.