Effect of Guest Solvents on the Ionic Conductivity and Electrochemical Performance of Metal-Organic Framework-Based Magnesium Semi-Solid Electrolytes

Developing suitable electrolytes is crucial for the advancement of rechargeable magnesium batteries. Recently, metal-organic frameworks (MOFs) have shown a great interest in the field of solid electrolytes for metal ion batteries. However, the ionic conductivity as well as the electrolyte stability in the presence of Mg electrodes are shown to be strongly dependent on the guest solvent used to solvate Mg salts in MOFsSEs. Our measurements showed that full evacuation of the MOF structure before semi-solid electrolytes (sSEs) preparation is crucial for achieving relatively low Mg overpotentials regardless of the ionic conductivity values. Moreover, the behavior of the anode/MOFsSEs interfaces (MOF: α-Mg3 [HCOO]6 ; Mg salt : MgCl2 -Mg[TFSI]2 (1 : 1 wt %); guest solvent: acetone, DMF, DEG, DME and tetraglyme) was investigated by EIS, CV and galvanostatic measurements. The current comparative study of the electrochemical deposition processes of magnesium from MOFsSEs revealed that magnesium deposition/dissolution reactions vary depending on the MOF structure, the guest anion species as well as the nature of the guest solvents.

Structure, Luminescence and Temperature Detection Capability of [C(NH2)3]M(HCOO)3 (M = Mg2+, Mn2+, Zn2+) Hybrid Organic-Inorganic Formate Perovskites Containing Cr3+ Ions

Metal-organic frameworks are of great interest to scientists from various fields. This group also includes organic-inorganic hybrids with a perovskite structure. Recently their structural, phonon, and luminescent properties have been paid much attention. However, a new way of characterization of these materials has become luminescence thermometry. Herein, we report the structure, luminescence, and temperature detection ability of formate organic-inorganic perovskite [C(NH₂)₃]M(HCOO)₃ (Mg²⁺, Mn²⁺, Zn²⁺) doped with Cr³⁺ ions. Crystal field strength (Dq/B) and Racah parameters were determined based on diffuse reflectance spectra. It was shown that Cr³⁺ ions are positioned in the intermediate crystal field or close to it with a Dq/B range of 2.29-2.41. The co-existence of the spin-forbidden and spin-allowed transitions of Cr³⁺ ions enable the proposal of an approach for remote readout of the temperature. The relative sensitivity (S_r) can be easily modified by sample composition and Cr³⁺ ions concentration. The luminescent thermometer based on the ²E/⁴T_2g transitions has the relative sensitivity S_r of 2.08%K^-1 at 90 K for [C(NH₂)₃]Mg(HCOO)₃: 1% Cr³⁺ and decrease to 1.20%K^-1 at 100 K and 1.08%K^-1 at 90 K for Mn²⁺ and Zn²⁺ analogs, respectively.

Solvent-derived defects suppress adsorption in MOF-74

Defects in metal-organic frameworks (MOFs) have great impact on their nano-scale structure and physiochemical properties. However, isolated defects are easily concealed when the frameworks are interrogated by typical characterization methods. In this work, we unveil the presence of solvent-derived formate defects in MOF-74, an important class of MOFs with open metal sites. With multi-dimensional solid-state nuclear magnetic resonance (NMR) investigations, we uncover the ligand substitution role of formate and its chemical origin from decomposed N,N-dimethylformamide (DMF) solvent. The placement and coordination structure of formate defects are determined by ¹³C NMR and density functional theory (DFT) calculations. The extra metal-oxygen bonds with formates partially eliminate open metal sites and lead to a quantitative decrease of N₂ and CO₂ adsorption with respect to the defect concentration. In-situ NMR analysis and molecular simulations of CO₂ dynamics elaborate the adsorption mechanisms in defective MOF-74. Our study establishes comprehensive strategies to search, elucidate and manipulate defects in MOFs.

Observation of an Intermediate to H2 Binding in a Metal-Organic Framework

Coordinatively unsaturated metal sites within certain zeolites and metal-organic frameworks can strongly adsorb a wide array of substrates. While many classical examples involve electron-poor metal cations that interact with adsorbates largely through physical interactions, unsaturated electron-rich metal centers housed within porous frameworks can often chemisorb guests amenable to redox activity or covalent bond formation. Despite the promise that materials bearing such sites hold in addressing myriad challenges in gas separations and storage, very few studies have directly interrogated mechanisms of chemisorption at open metal sites within porous frameworks. Here, we show that nondissociative chemisorption of H₂ at the trigonal pyramidal Cu⁺ sites in the metal-organic framework Cu^I-MFU-4l occurs via the intermediacy of a metastable physisorbed precursor species. In situ powder neutron diffraction experiments enable crystallographic characterization of this intermediate, the first time that this has been accomplished for any material. Evidence for a precursor intermediate is also afforded from temperature-programmed desorption and density functional theory calculations. The activation barrier separating the precursor species from the chemisorbed state is shown to correlate with a change in the Cu⁺ coordination environment that enhances π-backbonding with H₂. Ultimately, these findings demonstrate that adsorption at framework metal sites does not always follow a concerted pathway and underscore the importance of probing kinetics in the design of next-generation adsorbents.

Enhancing the chemical flexibility of hybrid perovskites by introducing divalent ligands

Herein we report the synthesis and structures of [(CH3)2NH2]Er(HCO2)2(C2O4) and [(NH2)3C]Er(HCO2)2(C2O4), in which the inclusion of divalent oxalate ligands allows for the exclusive incorporation of A+ and B3+ cations in an ABX3 hybrid perovskite structure for the first time. We rationalise the observed thermal expansion of these materials, including negative thermal expansion, and find evidence for weak antiferromagnetic coupling in [(CH3)2NH2]Er(HCO2)2(C2O4).

Ultrahigh phase transition temperature in a metal–halide perovskite-type material containing unprecedented hydrogen bonding interactions

An ABX₃ perovskite-type compound (N,N-dimethylethanolammonium)CdCl₃ with hydrogen bonding interactions between organic ammonium cations undergoes a phase transition at super-high temperatures.

The effect of K+ cations on the phase transitions, and structural, dielectric and luminescence properties of [cat][K0.5Cr0.5(HCOO)3], where cat is protonated dimethylamine or ethylamine

We report the synthesis, crystal structure, and dielectric, vibrational and emission spectra of novel heterometallic DMAKCr and EtAKCr MOFs.

Synthesis and temperature-dependent studies of a perovskite-like manganese formate framework templated with protonated acetamidine

Acetamidinium manganese formate undergoes a phase transition from the Imma to the P2₁/n structure at 304 K and magnetic order below 9 K.

Phase transitions and chromium(iii) luminescence in perovskite-type [C2H5NH3][Na0.5CrxAl0.5−x(HCOO)3] (x = 0, 0.025, 0.5), correlated with structural, dielectric and phonon properties

We report the synthesis, crystal structure, dielectric, vibrational and emission spectra of heterometallic MOFs, [C₂H₅NH₃][Na_0.5Cr_xAl_0.5−x(HCOO)₃] (x = 0, 0.025, 0.5).

Experimental and theoretical studies of structural phase transition in a novel polar perovskite-like [C2H5NH3][Na0.5Fe0.5(HCOO)3] formate

We report the synthesis and studies of a novel heterometallic formate [C₂H₅NH₃][Na_0.5Fe_0.5(HCOO)₃].

Synthesis and characterization of [(CH3)2NH2][Na0.5Cr0.5(HCOO)3]: a rare example of luminescent metal-organic frameworks based on Cr(III) ions

A novel formate [(CH3)2NH2][Na0.5Cr0.5(HCOO)3] (DMNaCr) was prepared by a solvothermal method. This compound crystallizes in the perovskite-type metal formate framework (space group R3[combining macron]) with disordered dimethylammonium (DMA(+)) cations. X-ray diffraction, DSC, Raman and IR studies show that in contrast to the isostructural iron analogue [(CH3)2NH2][Na0.5Fe0.5(HCOO)3] (DMNaFe), DMNaCr does not exhibit any structural phase transition at low temperatures. This behavior has been attributed to the smaller flexibility of the perovskite-like framework in DMNaCr when compared with that of DMNaFe. Dielectric permittivity data reveal pronounced dielectric relaxation that is attributed to the dynamical rotation of DMA(+) ions. Electron absorption and photoluminescence studies show that this material exhibits efficient emission at low temperatures. A detailed analysis of the optical properties shows that chromium ions are located at the site of intermediate crystal field strength with Dq/B = 2.29.

Magnesium-based systems for carbon dioxide capture, storage and recycling: from leaves to synthetic nanostructured materials

Magnesium is used as leitmotif in this review in order to explore the systems involved in natural and artificial CO₂ cycles.

Temperature-dependent studies of [(CH3)2NH2][FeIIIMII(HCOO)6] frameworks (MII = Fe and Mg): structural, magnetic, dielectric and phonon properties

We report temperature-dependent studies of [(CH₃)₂NH₂]Fe^IIIMg^II(HCOO)₆] and [(CH₃)₂NH₂]Fe^IIIFe^II(HCOO)₆] and discuss the origin of different behaviors of both compounds.

Raman and IR studies of pressure- and temperature-induced phase transitions in [(CH2)3NH2][Zn(HCOO)3]

Temperature- and pressure-dependent studies of Raman and IR spectra have been performed on azetidinium zinc formate, [(CH2)3NH2][Zn(HCOO)3]. Vibrational spectra showed distinct anomalies in mode frequencies and bandwidths near 250 and 300 K, which were attributed to structural phase transitions associated with the gradual freezing of ring-puckering motions of the azetidinium cation. Pressure-dependent studies revealed a pressure-induced transition near 0.4 GPa. Raman spectra indicate that the structure of the room-temperature intermediate phase observed near 0.4 GPa is the same as the monoclinic structure observed at ambient pressure below 250 K. The second phase transition was found near 2.4 GPa. This transition has strong first-order character and is associated with strong distortion of both the zinc formate framework and azetidinium cations. The last phase transition was found near 7.0 GPa. This transition leads to lowering of the symmetry and further distortion of the zinc formate framework, whereas the azetidinium cation structure is weakly affected.

Perovskite metal formate framework of [NH2-CH(+)-NH2]Mn(HCOO)3]: phase transition, magnetic, dielectric, and phonon properties

We report the synthesis, crystal structure, and thermal, dielectric, phonon, and magnetic properties of [NH2-CH(+)-NH2][Mn(HCOO)3] (FMDMn). The anionic framework of [(Mn(HCOO)3(-)] is counterbalanced by formamidinium (FMD(+)) cations located in the cavities of the framework. These cations form extensive N-H···O hydrogen bonding with the framework. The divalent manganese ions have octahedral geometry and are bridged by the formate in an anti-anti mode of coordination. We have found that FMDMn undergoes a structural phase transition around 335 K. According to the X-ray diffraction, the compound shows R3̅c symmetry at 355 K and C2/c symmetry at 295 and 110 K. The FMD(+) cations are dynamically disordered in the high-temperature phase, and the disorder leads to very large bandwidths of Raman and IR bands corresponding to vibrations of the NH2 groups. Temperature-dependent studies show that the phase transition in FMDMn is associated with ordering of the FMD(+) cations. Detailed analysis shows, however, that these cations still exhibit some reorientational motions down to about 200 K. The ordering of the FMD(+) cations is associated with significant distortion of the anionic framework. On the basis of the magnetic data, FMDMn is a weak ferromagnet with the critical temperature Tc = 8.0 K.

Synthesis and order–disorder transition in a novel metal formate framework of [(CH3)2NH2]Na0.5Fe0.5(HCOO)3]

We report the synthesis and characterization of a novel metal formate templated by dimethylammonium cations, [(CH₃)₂NH₂][Na_0.5Fe_0.5(HCOO)₃], exhibiting phase transition at 167 K.

Phase transitions, prominent dielectric anomalies, and negative thermal expansion in three high thermally stable ammonium magnesium-formate frameworks

We present three Mg-formate frameworks, incorporating three different ammoniums: [NH4][Mg(HCOO)3] (1), [CH3CH2NH3][Mg(HCOO)3] (2) and [NH3(CH2)4NH3][Mg2(HCOO)6] (3). They display structural phase transitions accompanied by prominent dielectric anomalies and anisotropic and negative thermal expansion. The temperature-dependent structures, covering the whole temperature region in which the phase transitions occur, reveal detailed structural changes, and structure-property relationships are established. Compound 1 is a chiral Mg-formate framework with the NH4(+) cations located in the channels. Above 255 K, the NH4(+) cation vibrates quickly between two positions of shallow energy minima. Below 255 K, the cations undergo two steps of freezing of their vibrations, caused by the different inner profiles of the channels, producing non-compensated antipolarization. These lead to significant negative thermal expansion and a relaxor-like dielectric response. In perovskite 2, the orthorhombic phase below 374 K possesses ordered CH3CH2NH3(+) cations in the cubic cavities of the Mg-formate framework. Above 374 K, the structure becomes trigonal, with trigonally disordered cations, and above 426 K, another phase transition occurs and the cation changes to a two-fold disordered state. The two transitions are accompanied by prominent dielectric anomalies and negative and positive thermal expansion, contributing to the large regulation of the framework coupled the order-disorder transition of CH3CH2NH3(+). For niccolite 3, the gradually enhanced flipping movement of the middle ethylene of [NH3(CH2)4NH3](2+) in the elongated framework cavity finally leads to the phase transition with a critical temperature of 412 K, and the trigonally disordered cations and relevant framework change, providing the basis for the very strong dielectric dispersion, high dielectric constant (comparable to inorganic oxides), and large negative thermal expansion. The spontaneous polarizations for the low-temperature polar phases are 1.15, 3.43 and 1.51 μC cm(-2) for 1, 2 and 3, respectively, as estimated by the shifts of the cations related to the anionic frameworks. Thermal and variable-temperature powder X-ray diffraction studies confirm the phase transitions, and the materials are all found to be thermally stable up to 470 K.