MnCO3 Cuboids from Spent LIBs: A New Age Displacement Anode to Build High-Performance Li-Ion Capacitors

The advantage of hybridizing battery and supercapacitor electrodes has succeeded recently in designing hybrid charge storage systems such as lithium-ion capacitors (LICs) with the benefits of higher energy than supercapacitors and more power density than batteries. However, sluggish Li-ion diffusion of battery anode is one of the main barriers and hampers the development of high-performance LICs. Herein, is introduced a new conversion/displacement type anode, MnCO₃ , via effectively recycling spent Li-ion batteries cathodes for LICs applications. The MnCO₃  cuboids are regenerated from the spent LiMn₂ O₄  cathodes by organic acid lixiviation process, and hydrothermal treatment displays excellent reversibility of 535  mAh g^-1  after 50  cycles with a Coulombic efficiency of >99%. Later, LIC is assembled with the regenerated MnCO₃  cubes in pre-lithiated form (Mn⁰  + Li₂ CO₃ ) as anode and commercial activated carbon (AC) as the cathode, delivering a maximum energy density of 169.4 Wh kg^-1  at 25 °C with ultra-long durability of 15,000 cycles. Even at various atmospheres like -5 and 50 °C, this LIC can offer a energy densities of 53.8 and 119.5 Wh kg^-1 , respectively. Remarkably, the constructed AC/Mn⁰  + Li₂ CO₃ -based LIC exhibits a good cycling performance for a continuous 1000 cycles with >91% retention invariably for all temperature conditions.

Free-Standing PVDF/Reduced Graphene Oxide Film for All-Solid-State Flexible Supercapacitors towards Self-Powered Systems

The development of polymer-based devices has attracted much attention due to their miniaturization, flexibility, lightweight and sustainable power sources with high efficiency in the field of wearable/portable electronics, and energy system. In this work, we proposed a polyvinylidene fluoride (PVDF)-based composite matrix for both energy harvesting and energy storage applications. The physicochemical characterizations, such as X-ray diffraction, laser Raman, and field-emission scanning electron microscopy (FE-SEM) analyses, were performed for the electrospun PVDF/sodium niobate and PVDF/reduced graphene oxide composite film. The electrospun PVDF/sodium niobate nanofibrous mat has been utilized for the energy harvester which shows an open circuit voltage of 40 V (peak to peak) at an applied compressive force of 40 N. The PVDF/reduced graphene oxide composite film acts as the electrode for the symmetric supercapacitor (SSC) device fabrication and investigated for their supercapacitive properties. Finally, the self-charging system has been assembled using PVDF/sodium niobate (energy harvester), and PVDF/reduced graphene oxide SSC (energy storage) and the self-charging capability is investigated. The proposed self-charging system can create a pathway for the all-polymer based composite high-performance self-charging system.

Preparation, formation mechanism, photocatalytic, cytotoxicity and antioxidant activity of sodium niobate nanocubes

A hydrothermal method was employed to prepare the sodium niobate (NaNbO₃) nanocubes. We executed time dependent experiments to illustrate the formation mechanism of sodium niobate nanocubes. It was observed that the morphology of NaNbO₃ nanocubes was dependent on the reaction time and 12hr reaction time was found to be suitable. Morphology, composition, structure and optical properties of sodium niobate nanocubes were evaluated by scanning electron microscope, X-ray energy-dispersive spectrometer, X-ray diffraction and UV-visible diffuse reflectance spectrometer. The photocatalytic activity of sodium niobate was studied for photocatalytic hydrogen production. It was anticipated that the sodium niobate (NaNbO₃) cubes exhibited good photocatalytic activity under UV light irradiation using lactic acid as sacrificial agent. The cytotoxicity activity of sodium niobate nanocubes was studied as well at different concentrations (5 mg/mL, 3 mg/mL, 1 mg/mL, and 0.25 mg/mL) against human colon colorectal carcinoma cell line (HCT116) by MTT assay and EC₅₀ was found to be 1.9 mg/mL. Sodium niobate proved to be a good DPPH free radical scavenging material, tested at different concentrations. It was noticed that peak intensity at 517 nm was decreased after 30 minute incubation, further supporting the antioxidant activity. This study will be useful for design and engineering of materials that can be used in biomedical applications and in photocatalysis.

Dual-porosity Mn2O3 cubes for highly efficient dye adsorption

Dual-porosity materials containing both macropores and mesopores are highly desired in many fields. In this work, we prepared dual-porosity Mn₂O₃ cube materials with large-pore mesopores, in which, macropores are made by using carbon spheres as the hard templates, while the mesopores are produced via a template-free route. The attained dual-porosity Mn₂O₃ materials have 24nm of large-pore mesopores and 700nm of macropores. Besides, the achieved materials own cubic morphologies with particle sizes as large as 6.0μm, making them separable in the solution by a facile natural sedimentation. Dye adsorption measurements reveal that the dual-porosity materials possess a very high maximum adsorption capacity of 125.6mg/g, much larger than many reported materials. Particularly, the adsorbents can be recycled and the dye removal efficiency can be well maintained at 98% after four cycles. Adsorption isotherm and kinetics show that the Langmuir model and the pseudo-second-order kinetics model can well describe the adsorption process of Congo Red on the dual-porosity Mn₂O₃ cube materials. In brief, the reported dual-porosity Mn₂O₃ demonstrates a good example for controlled preparation of dual-porosity materials with large-pore mesopores, and the macropore-mesopore dual-porosity distribution is good for mass transfer in dye adsorption application.

Mesocrystals as a class of multifunctional materials

Mesocrystals that consist of crystallographically aligned individual building blocks and controlled level of porosity in between exhibit unique structures and multifunctional behavior.