Copper Phosphide Nanostructures Covalently Modified Ti3 C2 Tx for Fast Lithium-Ion Storage by Enhanced Kinetics and Pesudocapacitance

2D layer Ti3 C2 Tx material attracts enormous attention in lithium ion energy storage field owing to the unique surface chemistry properties, but the material still suffers from restacking issue and the restriction on capacity. Herein, copper phosphide (Cu3 P) nanostructures@Ti3 C2 Tx composites are prepared by the in situ generation of Cu-BDC precursor in the bulk material followed with phosphorization. The uniformly distributed copper phosphide nanostructures effectively expand the interlayer spacing promoting the structural stability, and achieves the effective connection with the bulk material accelerating the diffusion and migration of lithium ions. The electrochemical activity of Cu3 P also provides more lithium ion active sites for lithium storage. The X-ray photoelectron spectroscopy (XPS) analysis verifies that Ti─O─P bond with strong covalency allows the upper shift of maximum valence band and Fermi level, stimulating the charge transportation between Cu3 P and the bulk Ti3 C2 Tx for better electrode kinetics. 3Cu3 P@Ti3 C2 Tx exhibits excellent rate performance of 165.4 mAh g-1 at 3000 mA g-1 and the assembled 3Cu3 P@Ti3 C2 Tx //AC Lithium-ion hybrid capacitorsLIC exhibits superior energy density of 93.0 Wh kg-1 at the power density of 2367.3 W kg-1 . The results suggest that the interfacial modification of Ti3 C2 Tx with transition metal phosphides will be advantageous to its high energy density application in lithium-ion storage.

Solution-Based Deep Prelithiation for Lithium-Ion Capacitors with High Energy Density

Lithium-ion capacitors (LICs) exhibit superior power density and cyclability compared to lithium-ion batteries. However, the low initial Coulombic efficiency (ICE) of amorphous carbon anodes (e.g., hard carbon (HC) and soft carbon (SC)) limits the energy density of LICs by underutilizing cathode capacity. Here, a solution-based deep prelithiation strategy for carbon anodes is applied using a contact-ion pair dominant solution, offering high energy density based on a systematic electrode balancing based on the cathode capacity increased beyond the original theoretical limit. Increasing the anode ICE to 150% over 100%, the activated carbon (AC) capacity is doubled by activating Li+ cation storage, which unleashes rocking-chair LIC operation alongside the dual-ion-storage mechanism. The increased AC capacity results in an energy density of 106.6 Wh kg-1 AC+SC , equivalent to 281% of that of LICs without prelithiation. Moreover, this process lowers the cathode-anode mass ratio, reducing the cell thickness by 67% without compromising the cell capacity. This solution-based deep chemical prelithiation promises high-energy LICs based on transition metal-free, earth-abundant active materials to meet the practical demands of power-intensive applications.

Nitrogen-Doped Porous Carbon Derived from Coal for High-Performance Dual-Carbon Lithium-Ion Capacitors

Lithium-ion capacitors (LICs) are emerging as one of the most advanced hybrid energy storage devices, however, their development is limited by the imbalance of the dynamics and capacity between the anode and cathode electrodes. Herein, anthracite was proposed as the raw material to prepare coal-based, nitrogen-doped porous carbon materials (CNPCs), together with being employed as a cathode and anode used for dual-carbon lithium-ion capacitors (DC-LICs). The prepared CNPCs exhibited a folded carbon nanosheet structure and the pores could be well regulated by changing the additional amount of g-C3N4, showing a high conductivity, abundant heteroatoms, and a large specific surface area. As expected, the optimized CNPCs (CTK-1.0) delivered a superior lithium storage capacity, which exhibited a high specific capacity of 750 mAh g-1 and maintained an excellent capacity retention rate of 97% after 800 cycles. Furthermore, DC-LICs (CTK-1.0//CTK-1.0) were assembled using the CTK-1.0 as both cathode and anode electrodes to match well in terms of internal kinetics and capacity simultaneously, which displayed a maximum energy density of 137.6 Wh kg-1 and a protracted lifetime of 3000 cycles. This work demonstrates the great potential of coal-based carbon materials for electrochemical energy storage devices and also provides a new way for the high value-added utilization of coal materials.

A Novel Anode Material Li2 FeGeO4 with Lithium Storage Mechanism Controlled by Both Iron and Germanium Elements

To obtain anode materials with high capacity/energy density for lithium-ion batteries, a polyanionic compound Li2 FeGeO4 is prepared, which combines the conversion-type Fe-based oxide and the alloy-type Ge-based oxide at the atomic scale. The influence of citric acid in the sol-gel process on the structure and performance of the calcined products (LFG0, LFG1, and LFG2) is investigated. The results demonstrate that citric acid does not affect the phase of Li2 FeGeO4 . However, with the increase of citric acid, the crystallinity and grain size of the final product are reduced and its dispersion becomes better. Among the as-prepared samples, LFG1 exhibits moderate particle size and more uniform dispersion, providing a high discharge capacity of 669.7 mAh g-1 at 0.5 A g-1 after 200 cycles. Based on the ex situ XPS and operando XRD tests, it is found that the electrochemical reaction process of LFG1 is controlled by both the conversion of iron/germanium and the alloying of germanium. In addition, it is verified that the reaction mechanism of LFG1 for aqueous lithium-ion capacitors is also controlled by iron and germanium elements. Importantly, Li2 FeGeO4 is first proved to be a novel anode for lithium-ion batteries and lithium-ion capacitors.

Trapping Lithium Selenides with Evolving Heterogeneous Interfaces for High-Power Lithium-Ion Capacitors

Transition metal selenides anodes with fast reaction kinetics and high theoretical specific capacity are expected to solve mismatched kinetics between cathode and anode in Li-ion capacitors. However, transition metal selenides face great challenges in the dissolution and shuttle problem of lithium selenides, which is the same as Li-Se batteries. Herein, inspired by the density functional theory calculations, heterogeneous can enhance the adsorption of Li₂ Se relative to single component selenide electrodes, thus inhibiting the dissolution and shuttle effect of Li₂ Se. A heterostructure material (denoted as CoSe₂ /SnSe) with the ability to evolve continuously (CoSe₂ /SnSe→Co/Sn→Co/Li₁₃ Sn₅ ) is successfully designed by employing CoSnO₃ -MOF as a precursor. Impressively, CoSe₂ /SnSe heterostructure material delivers the ultrahigh reversible specific capacity of 510 mAh g^-1 after 1000 cycles at the high current density of 4 A g^-1 . In situ XRD reveals the continuous evolution of the interface based on the transformation and alloying reactions during the charging and discharging process. Visualizations of in situ disassembly experiments demonstrate that the continuously evolving interface inhibits the shuttle of Li₂ Se. This research proposes an innovative approach to inhibit the dissolution and shuttling of discharge intermediates (Li₂ Se) of metal selenides, which is expected to be applied to metal sulfides or Li-Se and Li-S energy storage systems.

MnCO3 Cuboids from Spent LIBs: A New Age Displacement Anode to Build High-Performance Li-Ion Capacitors

The advantage of hybridizing battery and supercapacitor electrodes has succeeded recently in designing hybrid charge storage systems such as lithium-ion capacitors (LICs) with the benefits of higher energy than supercapacitors and more power density than batteries. However, sluggish Li-ion diffusion of battery anode is one of the main barriers and hampers the development of high-performance LICs. Herein, is introduced a new conversion/displacement type anode, MnCO₃ , via effectively recycling spent Li-ion batteries cathodes for LICs applications. The MnCO₃  cuboids are regenerated from the spent LiMn₂ O₄  cathodes by organic acid lixiviation process, and hydrothermal treatment displays excellent reversibility of 535  mAh g^-1  after 50  cycles with a Coulombic efficiency of >99%. Later, LIC is assembled with the regenerated MnCO₃  cubes in pre-lithiated form (Mn⁰  + Li₂ CO₃ ) as anode and commercial activated carbon (AC) as the cathode, delivering a maximum energy density of 169.4 Wh kg^-1  at 25 °C with ultra-long durability of 15,000 cycles. Even at various atmospheres like -5 and 50 °C, this LIC can offer a energy densities of 53.8 and 119.5 Wh kg^-1 , respectively. Remarkably, the constructed AC/Mn⁰  + Li₂ CO₃ -based LIC exhibits a good cycling performance for a continuous 1000 cycles with >91% retention invariably for all temperature conditions.

A Safer High-Energy Lithium-Ion Capacitor Using Fast-Charging and Stable ω-Li3 V2 O5 Anode

Lithium-ion capacitors (LICs) are flourishing toward high energy density and high safety, which depend significantly on the performance of the intercalation-type anodes used in LICs. However, commercially available graphite and Li₄ Ti₅ O₁₂ anodes in LICs suffer from inferior electrochemical performance and safety risks due to limited rate capability, energy density, thermal decomposition, and gassing issues. Here a safer high-energy LIC based on a fast-charging ω-Li₃ V₂ O₅ (ω-LVO) anode with a stable bulk/interface structure is reported. The electrochemical performance, thermal safety, and gassing behavior of the ω-LVO-based LIC device are investigated, followed by the exploration of the stability of the ω-LVO anode. The ω-LVO anode exhibits fast lithium-ion transport kinetics at room/elevated temperatures. Paired with an active carbon (AC) cathode, the AC||ω-LVO LIC with high energy density and long-term endurability is achieved. The accelerating rate calorimetry, in situ gas assessment, and ultrasonic scanning imaging technologies further verify the high safety of the as-fabricated LIC device. Theoretical and experimental results unveil that the high safety originates from the high structure/interface stability of the ω-LVO anode. This work provides important insights into electrochemical/thermochemical behaviors of ω-LVO-based anodes within LICs and offers new opportunities to develop safer high-energy LIC devices.

Holey Ti3C2 MXene-Derived Anode Enables Boosted Kinetics in Lithium-Ion Capacitors

Lithium-ion capacitors (LICs) attract enormous attention because of the urgent demands for high power and energy density devices. However, the intrinsic imbalance between anodes and cathodes with different charge-storage mechanisms blocks the further improvement in energy and power density. MXenes, novel two-dimensional materials with metallic conductivity, accordion-like structure, and regulable interlayer spacing, are widely employed in electrochemical energy storage devices. Herein, we propose a holey Ti₃C₂ MXene-derived composite (pTi₃C₂/C) with enhanced kinetics for LICs. This strategy effectively decreases the surface groups (-F and -O) and generates expanded interplanar spacing. The in-plane pores of Ti₃C₂T_x lead to increased active sites and accelerated lithium-ion diffusion kinetics. Benefiting from the expanded interplanar spacing and accelerated lithium-ion diffusion, the pTi₃C₂/C as an anode implements excellent electrochemical property (capacity retention about 80% after 2000 cycles). Furthermore, the LIC fabricated with a pTi₃C₂/C anode and an activated carbon cathode displays a maximum energy density of 110 Wh kg^-1 and a considerable energy density of 71 Wh kg^-1 at 4673 W kg^-1. This work provides an effective strategy to achieve high antioxidant capability and boosted electrochemical properties, which represents a new exploration of structural design and tuneable surface chemistry for MXene in LICs.

Engineering CoP Alloy Foil to a Well-Designed Integrated Electrode Toward High-Performance Electrochemical Energy Storage

Nanostructured integrated electrodes with binder-free design show great potential to solve the ever-growing problems faced by currently commercial lithium-ion batteries such as insufficient power and energy densities. However, there are still many challenging problems limiting practical application of this emerging technology, in particular complex manufacturing process, high fabrication cost, and low loading mass of active material. Different from existing fabrication strategies, here using a CoP alloy foil as a precursor  a simple neutral salt solution-mediated electrochemical dealloying method to well address the above issues is demonstrated. The resultant freestanding mesoporous np-Co(OH)_x /Co₂ P product possesses not only active compositions of high specific capacity and large electrode packing density (>3.0 g cm^-3 ) to meet practical capacity requirements, high-conductivity and well-developed nanoporous framework to achieve simultaneously fast ion and electron transfer, but also interconnected ligaments and suitable free space to ensure strong structural stability. Its comprehensively excellent electrochemical energy storage (EES) performances in both lithium/sodium-ion batteries and lithium-ion capacitors can further illustrate the effectiveness of the integrated electrode preparation strategy, such as remarkable reversible specific capacities/capacitances, dominated pseudo-capacitive EES mechanism, and ultra-long cycling life. This study provides new insights into preparation and design of high-performance integrated electrodes for practical applications.

Novel Nonstoichiometric Niobium Oxide Anode Material with Rich Oxygen Vacancies for Advanced Lithium-Ion Capacitors

Given the inherent features of open tunnel-like structures, moderate lithiation potential (1.0-3.0 V vs Li/Li⁺), and reversible redox couples (Nb⁵⁺/Nb⁴⁺ and Nb⁴⁺/Nb³⁺ redox couples), niobium-based oxides with Wadsley-Roth crystallographic shear structure are promising anode materials. However, their practical rate capability and cycling stability are still hindered by low intrinsic electronic conductivity and structural stability. Herein, ultrathin carbon-confined Nb₁₂O₂₉ materials with rich oxygen vacancies (Nb₁₂O_29-x@C) were designed and synthesized to address above-mentioned challenges. Computational simulations combined with experiments reveal that the oxygen vacancies can regulate the electronic structure to increase intrinsic electronic conductivity and reduce the Li⁺ diffusion barrier. Meanwhile, the carbon coating can enhance structural stability and further improve the electronic conductivity of the Nb₁₂O₂₉ material. As a result, the as-prepared Nb₁₂O_29-x@C exhibits high reversible capacity (226 mAh g^-1 at 0.1 A g^-1), excellent high-rate performance (83 mAh g^-1 at 5.0 A g^-1), and durable cycling life (98.1% capacity retention at 1.0 A g^-1 after 3000 cycles). The lithium storage mechanism and structural stability of Nb₁₂O_29-x@C were also revealed by in situ X-ray diffraction (XRD), ex situ X-ray photoelectron spectroscopy (XPS), and ex situ Raman spectroscopy. When applied as the anode of lithium-ion capacitors (LICs), the as-built LIC achieves high energy density (72.4 Wh kg^-1) within the voltage window of 0.01-3.5 V, demonstrating the practical application potential of the Nb₁₂O_29-x@C materials.

Engineering chemical-bonded Ti3C2 MXene@carbon composite films with 3D transportation channels for promoting lithium-ion storage in hybrid capacitors

Lithium-ion capacitors (LICs) are promising energy storage devices because they feature the high energy density of lithium-ion batteries and the high power density of supercapacitors. However, the mismatch of electrochemical reaction kinetics between the anode and cathode in LICs makes exploring anode materials with fast ion diffusion and electron transfer channels an urgent task. Herein, the two-dimensional (2D) Ti₃C₂ MXene with controllable terminal groups was introduced into 1D carbon nanofibers to form a 3D conductive network by the electrospinning strategy. In such Ti₃C₂ MXene and carbon matrix composites (named KTi-400@CNFs), the 2D nanosheet structure endows Ti₃C₂ MXene with more active sites for Li⁺ ion storage, and the carbon framework is favorable to the conductivity of the composites. Impressively, Ti-O-C bonds are formed at the interface between Ti₃C₂ MXene and the carbon framework. Such chemical bonding in the composites builds a bridge for rapid electron transportation and quick ion diffusion in the longitudinal direction from layer to layer. As a result, the optimized KTi-400@CNFs composites maintain a good capacity of 235 mA h g^-1 for 500 cycles at a current density of 5 A g^-1. The LIC consisting of the KTi-400@CNFs//AC configuration achieves high energy density (114.3 W h kg^-1) and high power density (12.8 kW kg^-1). This paper provides guidance for designing 2D materials and the KTi-400@CNFs composites with such a unique structure and superior electrochemical performance have great potential in the next-generation energy storage fields.

ELECTRONIC SUPPLEMENTARY MATERIAL

Supplementary material is available for this article at 10.1007/s40843-022-2268-9 and is accessible for authorized users.

Revealing An Intercalation-Conversion-Heterogeneity Hybrid Lithium-Ion Storage Mechanism in Transition Metal Nitrides Electrodes with Jointly Fast Charging Capability and High Energy Output

The performance of electrode materials depends intensively on the lithium (Li)-ion storage mechanisms correlating ultimately with the Coulombic efficiency, reversible capacity, and morphology variation of electrode material upon cycling. Transition metal nitrides anode materials have exhibited high-energy density and superior rate capability; however, the intrinsic mechanism is largely unexplored and still unclear. Here, a typical 3D porous Fe₂ N micro-coral anode is prepared and, an intercalation-conversion-heterogeneity hybrid Li-ion storage mechanism that is beyond the conventional intercalation or conversion reaction is revealed through various characterization techniques and thermodynamic analysis. Interestingly, using advanced in situ magnetometry, the ratio (ca. 24.4%) of the part where conversion reaction occurs to the entire Fe₂ N can further be quantified. By rationally constructing a Li-ion capacitor comprising 3D porous Fe₂ N micro-corals anode and commercial AC cathode, the hybrid full device delivers a high energy-density (157 Wh kg^-1 ) and high power-density (20 000 W kg^-1 ), as well as outstanding cycling stability (93.5% capacitance retention after 5000 cycles). This research provides an original and insightful method to confirm the reaction mechanism of material related to transition metals and a fundamental basis for emerging fast charging electrode materials to be efficiently explored for a next-generation battery.

Prelithiation Bridges the Gap for Developing Next-Generation Lithium-Ion Batteries/Capacitors

The ever-growing market of portable electronics and electric vehicles has spurred extensive research for advanced lithium-ion batteries (LIBs) with high energy density. High-capacity alloy- and conversion-type anodes are explored to replace the conventional graphite anode. However, one common issue plaguing these anodes is the large initial capacity loss caused by the solid electrolyte interface formation and other irreversible parasitic reactions, which decrease the total energy density and prevent further market integration. Prelithiation becomes indispensable to compensate for the initial capacity loss, enhance the full cell cycling performance, and bridge the gap between laboratory studies and the practical requirements of advanced LIBs. This review summarizes the various emerging anode and cathode prelithiation techniques, the key barriers, and the corresponding strategies for manufacturing-compatible and scalable prelithiation. Furthermore, prelithiation as the primary Li⁺ donor enables the safe assembly of new-configured "beyond LIBs" (e.g., Li-ion/S and Li-ion/O₂ batteries) and high power-density Li-ion capacitors (LICs). The related progress is also summarized. Finally, perspectives are suggested on the future trend of prelithiation techniques to propel the commercialization of advanced LIBs/LICs.

A Mechanically Flexible Necklace-Like Architecture for Achieving Fast Charging and High Capacity in Advanced Lithium-Ion Capacitors

Integration of fast charging, high capacity, and mechanical flexibility into one electrode is highly desired for portable energy-storage devices. However, a high charging rate is always accompanied by capacity decay and cycling instability. Here, a necklace-structured composite membrane consisting of micron-sized FeSe₂ cubes uniformly threaded by carbon nanofibers (CNF) is reported. This unique electrode configuration can not only accommodate the volumetric expansion of FeSe₂ during the lithiation/delithiation processes for structural robustness but also guarantee ultrafast kinetics for Li⁺ entry. At a high mass loading of 6.2 mg cm^-2 , the necklace-like FeSe₂ @CNF electrode exhibits exceptional rate capability (80.7% capacity retention from 0.1 to 10 A g^-1 ) and long-term cycling stability (no capacity decay after 1100 charge-discharge cycles at 2 A g^-1 ). The flexible lithium-ion capacitor (LIC) fabricated by coupling a pre-lithiated FeSe₂ @CNF anode with a porous carbon cathode delivers impressive volumetric energy//power densities (98.4 Wh L^-1 at 157.1 W L^-1 , and 58.9 Wh L^-1 at 15714.3 W L^-1 ). The top performance, long-term cycling stability, low self-discharge rate, and high mechanical flexibility make it among the best LICs ever reported.

3D Nano-heterostructure of ZnMn2O4@Graphene-Carbon Microtubes for High-Performance Li-Ion Capacitors

Heterostructures show great potential in energy storage due to their multipurpose structures and function. Recently, two-dimensional (2D) graphene has been widely regarded as an excellent substrate for active materials due to its large specific surface area and superior electrical conductivity. However, it is prone to self-aggregation during charging and discharging, which limits its electrochemical performance. To address the graphene agglomeration problem, we interspersed polypyrrole carbon nanotubes between the graphene cavities and designed three-dimensional (3D)-heterostructures of ZnMn2O4@rGO-polypyrrole carbon nanotubes (ZMO@G-PNTs), which demonstrated a high rate and cyclic stability in lithium-ion capacitors (LICs). Furthermore, the 3D porous structure provided more surface capacity contribution than 2D graphene, ultimately resulting in a better stability (333 mAh g-1 after 1000 cycles at 1 A g-1) and high rate capacity (208 mAh g-1 at 5 A g-1). Also, the mechanism of performance difference between ZMO@G-PNTs and ZMO@G was investigated in detail. Moreover, LICs built from ZMO@G-PNTs as an anode and activated carbon as a cathode showed an energy density of 149.3 Wh kg-1 and a power density of 15 kW kg-1 and cycling stability with a capacity retention of 61.5% after 9000 cycles.

Graphene-Based Cathode Materials for Lithium-Ion Capacitors: A Review

Lithium-ion capacitors (LICs) are attracting increasing attention because of their potential to bridge the electrochemical performance gap between batteries and supercapacitors. However, the commercial application of current LICs is still impeded by their inferior energy density, which is mainly due to the low capacity of the cathode. Therefore, tremendous efforts have been made in developing novel cathode materials with high capacity and excellent rate capability. Graphene-based nanomaterials have been recognized as one of the most promising cathodes for LICs due to their unique properties, and exciting progress has been achieved. Herein, in this review, the recent advances of graphene-based cathode materials for LICs are systematically summarized. Especially, the synthesis method, structure characterization and electrochemical performance of various graphene-based cathodes are comprehensively discussed and compared. Furthermore, their merits and limitations are also emphasized. Finally, a summary and outlook are presented to highlight some challenges of graphene-based cathode materials in the future applications of LICs.

Robust and Fast Lithium Storage Enabled by Polypyrrole-Coated Nitrogen and Phosphorus Co-Doped Hollow Carbon Nanospheres for Lithium-Ion Capacitors

Lithium-ion capacitors (LICs) have been proposed as an emerging technological innovation that integrates the advantages of lithium-ion batteries and supercapacitors. However, the high-power output of LICs still suffers from intractable challenges due to the sluggish reaction kinetics of battery-type anodes. Herein, polypyrrole-coated nitrogen and phosphorus co-doped hollow carbon nanospheres (NPHCS@PPy) were synthesized by a facile method and employed as anode materials for LICs. The unique hybrid architecture composed of porous hollow carbon nanospheres and PPy coating layer can expedite the mass/charge transport and enhance the structural stability during repetitive lithiation/delithiation process. The N and P dual doping plays a significant role on expanding the carbon layer spacing, enhancing electrode wettability, and increasing active sites for pseudocapacitive reactions. Benefiting from these merits, the NPHCS@PPy composite exhibits excellent lithium-storage performances including high rate capability and good cycling stability. Furthermore, a novel LIC device based on the NPHCS@PPy anode and the nitrogen-doped porous carbon cathode delivers a high energy density of 149 Wh kg⁻¹ and a high power density of 22,500 W kg⁻¹ as well as decent cycling stability with a capacity retention rate of 92% after 7,500 cycles. This work offers an applicable and alternative way for the development of high-performance LICs.

Novel Lithium-Ion Capacitor Based on a NiO-rGO Composite

Lithium-ion capacitors (LICs) have been widely explored for energy storage. Nevertheless, achieving good energy density, satisfactory power density, and stable cycle life is still challenging. For this study, we fabricated a novel LIC with a NiO-rGO composite as a negative material and commercial activated carbon (AC) as a positive material for energy storage. The NiO-rGO//AC system utilizes NiO nanoparticles uniformly distributed in rGO to achieve a high specific capacity (with a current density of 0.5 A g-1 and a charge capacity of 945.8 mA h g-1) and uses AC to provide a large specific surface area and adjustable pore structure, thereby achieving excellent electrochemical performance. In detail, the NiO-rGO//AC system (with a mass ratio of 1:3) can achieve a high energy density (98.15 W h kg-1), a high power density (10.94 kW kg-1), and a long cycle life (with 72.1% capacity retention after 10,000 cycles). This study outlines a new option for the manufacture of LIC devices that feature both high energy and high power densities.

Oxidized-Polydopamine-Coated Graphene Anodes and N,P Codoped Porous Foam Structure Activated Carbon Cathodes for High-Energy-Density Lithium-Ion Capacitors

As a tradeoff between supercapacitors and batteries, lithium-ion capacitors (LICs) are designed to deliver high energy density, high power density, and long cycling stability. Owing to the different energy storage mechanisms of capacitor-type cathodes and battery-type anodes, engineering and fabricating LICs with excellent energy density and power density remains a challenge. Herein, to alleviate the mismatch between the anode and cathode, we ingeniously designed a graphene with oxidized-polydopamine coating (LG@DA1) and N,P codoped porous foam structure activated carbon (CPC750) as the battery-type anode and capacitor-type cathode, respectively. Using oxidized-polydopamine to stabilize the structure of graphene, increase layer spacing, and modify the surface chemical property, the LG@DA1 anode delivers a maximum capacity of 1100 mAh g^-1 as well as good cycling stability. With N,P codoping and a porous foam structure, the CPC750 cathode exhibits a large effective specific surface area and a high specific capacity of 87.5 mAh g^-1. In specific, the present LG@DA1//CPC750 LIC showcases a high energy density of 170.6 Wh kg^-1 and superior capacity retention of 93.5% after 2000 cycles. The success of the present LIC can be attributed to the structural stability design, surface chemistry regulation, and enhanced utilization of effective active sites of the anode and cathode; thus, this strategy can be applied to improve the performance of LICs.

Crystal Phase-Controlled Synthesis of the CoP@Co2P Heterostructure with 3D Nanowire Networks for High-Performance Li-Ion Capacitor Applications

The paramount focus in the construction of lithium-ion capacitors (LICs) is the development of anode materials with high reversible capacity and fast kinetics to overcome the mismatch of kinetics and capacity between the anode and cathode. Herein, a strategy is presented for the controllable synthesis of cobalt-based phosphides with various morphologies by adjusting the time of the phosphidation process, including 3D hierarchical needle-stacked diabolo-shaped CoP nanorods, 3D hierarchical stick-stacked diabolo-shaped Co₂P nanorods, and 3D hierarchical heterostructure CoP@Co₂P nanorods. 3D hierarchical nanostructures and a highly conductive project to accommodate volume changes are rational designs to achieve a robust construction, effective electron-ion transportation, and rapid kinetics characteristics, thus leading to excellent cycling stability and rate performance. Owing to these merits, the 3D hierarchical CoP, Co₂P, and CoP@Co₂P nanorods demonstrate prominent specific capacities of 573, 609, and 621 mA h g^-1 at 0.1 A g^-1 over 300 cycles, respectively. In addition, a high-performance CoP@Co₂P//AC LIC is successfully constructed, which can achieve high energy densities of 166.2 and 36 W h kg^-1 at power densities of 175 and 17524 W kg^-1 (83.7% capacity retention after 12000 cycles). Therefore, the controllable synthesis of various simultaneously constructed crystalline phases and morphologies can be used to fabricate other advanced energy storage devices.

Na0.76V6O15/Activated Carbon Hybrid Cathode for High-Performance Lithium-Ion Capacitors

Lithium-ion hybrid capacitors (LICs) are regarded as one of the most promising next generation energy storage devices. Commercial activated carbon materials with low cost and excellent cycling stability are widely used as cathode materials for LICs, however, their low energy density remains a significant challenge for the practical applications of LICs. Herein, Na_0.76V₆O₁₅ nanobelts (NaVO) were prepared and combined with commercial activated carbon YP50D to form hybrid cathode materials. Credit to the synergism of its capacitive effect and diffusion-controlled faradaic effect, NaVO/C hybrid cathode displays both superior cyclability and enhanced capacity. LICs were assembled with the as-prepared NaVO/C hybrid cathode and artificial graphite anode which was pre-lithiated. Furthermore, 10-NaVO/C//AG LIC delivers a high energy density of 118.9 Wh kg⁻¹ at a power density of 220.6 W kg⁻¹ and retains 43.7 Wh kg⁻¹ even at a high power density of 21,793.0 W kg⁻¹. The LIC can also maintain long-term cycling stability with capacitance retention of approximately 70% after 5000 cycles at 1 A g⁻¹. Accordingly, hybrid cathodes composed of commercial activated carbon and a small amount of high energy battery-type materials are expected to be a candidate for low-cost advanced LICs with both high energy density and power density.

Scalable Production of Wearable Solid-State Li-Ion Capacitors from N-Doped Hierarchical Carbon

Smart and wearable electronics have aroused substantial demand for flexible portable power sources, but it remains a large challenge to realize scalable production of wearable batteries/supercapacitors with high electrochemical performance and remarkable flexibility simultaneously. Here, a scalable approach is developed to prepare wearable solid-state lithium-ion capacitors (LICs) with superior performance enabled by synergetic engineering from materials to device architecture. Nitrogen-doped hierarchical carbon (HC) composed of 1D carbon nanofibers welded with 2D carbon nanosheets is synthesized via a unique self-propagating high-temperature synthesis (SHS) technique, which exhibits superior electrochemical performance. Subsequently, inspired by origami, here, wave-shaped LIC punch-cells based on the above materials are designed by employing a compatible and scalable post-imprint technology. Finite elemental analysis (FEA) confirms that the bending stress of the punch-cell can be offset effectively, benefiting from the wave architecture. The wearable solid-state LIC punch-cell exhibits large energy density, long cyclic stability, and superior flexibility. This study demonstrates great promise for scalable fabrication of wearable energy-storage systems.

Boron Carbonitride Lithium-Ion Capacitors with an Electrostatically Expanded Operating Voltage Window

Lithium-ion capacitors (LICs) have emerged as attractive energy storage devices to bridge the gap between lithium-ion batteries and supercapacitors. While the distinct charge storage kinetics between the anode and the cathode is still a challenge to the widespread application of LICs, the key to improving the energy density of these devices is to widen the operating voltage window and balance the mismatch of the electrode kinetics. To this end, we propose a strategy based on electrostatic attraction by adjusting the B and N atom contents of boron carbonitride (BCN) electrode materials to alter their electronegativities and successfully prepared B-rich and N-rich BCN nanotubes (BCNNTs) via a facile solid-phase synthesis approach. The B-rich BCN (B-BCN) cathode and N-rich BCN (N-BCN) anode noticeably enhance the adsorption of anions and cations, promoting a matching degree between the anode and cathode. In particular, the rationally designed B-BCN//N-BCN LIC achieves a maximum voltage range of 4.8 V, setting a new record for LICs. Furthermore, the energy density reaches up to 200 Wh kg^-1 (based on the total mass of cathodic and anodic active materials). Density functional theory calculations provided insight into the mechanism underlying our strategy of widening the voltage range. Our philosophy provides new design guidelines and alternatives for identifying and optimizing high-performance electrodes for energy storage devices.

3D Hierarchically Structured CoS Nanosheets: Li+ Storage Mechanism and Application of the High-Performance Lithium-Ion Capacitors

Lithium-ion capacitors possess excellent power and energy densities, and they can combine both of those advantages from supercapacitors and lithium-ion batteries, leading to novel generation hybrid devices for storing energy. This study synthesized one three-dimensional (3D) hierarchical structure, self-assembled from CoS nanosheets, according to a simple and efficient manner, and can be used as an anode for lithium ion capacitors. This CoS anode, based on a conversion-type Li⁺ storage mechanism dominated by diffusion control, showed a large reversible capacity, together with excellent stability for cycling. The CoS shows a discharge capacity ≈434 mA h/g at 0.1 A/g. The hybrid lithium-ion capacitor, which had the CoS anode as well as the biochar cathode, exhibits excellent electrochemical performance with ultrahigh energy and power densities of 125.2 Wh/kg and 6400 W/kg, respectively, and an extended cycling life of 81.75% retention after 40 000 cycles. The CoS with self-assembled 3D hierarchical structure in combination with a carbon cathode offers a versatile device for future applications in energy storage.

Peapod-like Li3 VO4 /N-Doped Carbon Nanowires with Pseudocapacitive Properties as Advanced Materials for High-Energy Lithium-Ion Capacitors

Lithium ion capacitors are new energy storage devices combining the complementary features of both electric double-layer capacitors and lithium ion batteries. A key limitation to this technology is the kinetic imbalance between the Faradaic insertion electrode and capacitive electrode. Here, we demonstrate that the Li₃ VO₄ with low Li-ion insertion voltage and fast kinetics can be favorably used for lithium ion capacitors. N-doped carbon-encapsulated Li₃ VO₄ nanowires are synthesized through a morphology-inheritance route, displaying a low insertion voltage between 0.2 and 1.0 V, a high reversible capacity of ≈400 mAh g^-1 at 0.1 A g^-1 , excellent rate capability, and long-term cycling stability. Benefiting from the small nanoparticles, low energy diffusion barrier and highly localized charge-transfer, the Li₃ VO₄ /N-doped carbon nanowires exhibit a high-rate pseudocapacitive behavior. A lithium ion capacitor device based on these Li₃ VO₄ /N-doped carbon nanowires delivers a high energy density of 136.4 Wh kg^-1 at a power density of 532 W kg^-1 , revealing the potential for application in high-performance and long life energy storage devices.

Pillared Structure Design of MXene with Ultralarge Interlayer Spacing for High-Performance Lithium-Ion Capacitors

Two-dimensional transition-metal carbide materials (termed MXene) have attracted huge attention in the field of electrochemical energy storage due to their excellent electrical conductivity, high volumetric capacity, etc. Herein, with inspiration from the interesting structure of pillared interlayered clays, we attempt to fabricate pillared Ti₃C₂ MXene (CTAB-Sn(IV)@Ti₃C₂) via a facile liquid-phase cetyltrimethylammonium bromide (CTAB) prepillaring and Sn⁴⁺ pillaring method. The interlayer spacing of Ti₃C₂ MXene can be controlled according to the size of the intercalated prepillaring agent (cationic surfactant) and can reach 2.708 nm with 177% increase compared with the original spacing of 0.977 nm, which is currently the maximum value according to our knowledge. Because of the pillar effect, the assembled LIC exhibits a superior energy density of 239.50 Wh kg^-1 based on the weight of CTAB-Sn(IV)@Ti₃C₂ even under higher power density of 10.8 kW kg^-1. When CTAB-Sn(IV)@Ti₃C₂ anode couples with commercial AC cathode, LIC reveals higher energy density and power density compared with conventional MXene materials.