Regulating the defects of MIL-101(Cr) for the efficient and simultaneous determination of eleven plant growth regulators in fresh fruit juice

This work presents an efficient sorbent for plant growth regulators (PGRs) by regulating the defects of a metal-organic framework MIL-101(Cr). Using the regulated MIL-101(Cr), we developed a simple and effective method for the simultaneous determination of eleven PGRs in fresh fruit juice. The extraction conditions were optimized by an orthogonal array design. Under optimal conditions, the method showed a satisfactory limit of detection (0.1-1.2 ng/g), recovery rates (83.4-110.2 %), and precision (2.9-18.0 % for intra-day and 2.7-10.8 % for inter-day), as well as a greatly suppressed matrix effect. Notably, regulating the defects significantly enhanced the desorption of PGRs on MIL-101(Cr). The sorbent didn't need to be destroyed to release the adsorbed PGRs and could be reused at least 6 times. Furthermore, the defects of MIL-101(Cr) and interactions between the sorbent and PGRs were studied by TGA, ATR-IR, XPS, NH3-TPD and UV-Vis DRS.

Metal-Organic Framework-Based Materials for Wastewater Treatment: Superior Adsorbent Materials for the Removal of Hazardous Pollutants

In previous years, different pollutants, for example, organic dyes, antibiotics, heavy metals, pharmaceuticals, and agricultural pollutants, have been of note to the water enterprise due to their insufficient reduction during standard water and wastewater processing methods. MOFs have been found to have potential toward wastewater management. This Review focused on the synthesis process (such as traditional, electrochemical, microwave, sonochemical, mechanochemical, and continuous-flow spray-drying method) of MOF materials. Moreover, the properties of the MOF materials have been discussed in detail. Further, MOF materials' applications for wastewater treatment (such as the removal of antibiotics, organic dyes, heavy metal ions, and agricultural waste) have been discussed. Additionally, we have compared the performances of some typical MOFs-based materials with those of other commonly used materials. Finally, the study's current challenges, future prospects, and outlook have been highlighted.

Photocatalytic Degradation of Dyes Using Titania Nanoparticles Supported in Metal-Organic Materials Based on Iron

Composite materials based on titania nanoparticles (TiO2 NPs) and three metal-organic frameworks (MOFs) called MIL-53 (Fe) ((Fe (III) (OH) (1,4-BDC)), MILs (Materials Institute Lavoisier)), MIL-100 (Fe) (Fe3O(H2O)2OH(BTC)2), and Fe-BTC (iron-benzenetricarboxylate) with different percentages of TiO2 NPs (0.5, 1, and 2.5% wt.) were synthesized using the solvothermal method and used as photocatalytic materials in the degradation of two dyes (Orange II and Reactive Black 5 (RB5)). The pristine and composite materials were characterized with X-ray diffraction, Raman, UV–Vis and Fourier transform infrared spectroscopy and scanning electron microscopy techniques. The 2.5TiO2/MIL-100 composite material showed the best results for the degradation of both dyes (Reactive Black 5 and Orange II dye, 99% and 99.5% degradation in 105 and 150 min, respectively). The incorporation of TiO2 NPs into MOFs can decrease the recombination of the change carrier in the MOF, increasing the photocatalytic activity of a pristine MOF. Results therefore indicated that the synthesized MOF nanocomposites have good potential for wastewater treatment.

Poly(acrylic acid)/Fe3O4 Supported on MIL-100(Cr) MOF as a Novel and Magnetic Nanocatalyst for the Synthesis of Pyrido[2,3-d]Pyrimidines

In the current work, a convenient and simple approach for preparing poly (acrylic acid)/Fe₃O₄ supported on MIL-100(Cr) for the synthesis of pyrido [2,3-d]pyrimidine derivatives via the three-component one-pot reaction of 1,3-indandione, 6-amino uracil, and aromatic aldehydes is reported. The effectiveness of this new magnetic nanocatalyst was proved. The results showed this nanocatalyst's moderate to high yield under reflux conditions. SEM, TEM, IR, EDX, XRD, BET, and TGA were used to characterize the structure of the synthesized nanocatalyst. This synthetic protocol offers various advantages, including cost-saving, excellent yields in short reaction times (67–98%), low catalyst loading, and catalyst reusability.

Mechanochemical Synthesis of Phosphonate-Based Proton Conducting Metal-Organic Frameworks

Water-stable metal-organic frameworks (MOFs) with proton-conducting behavior have attracted great attention as promising materials for proton-exchange membrane fuel cells. Herein, we report the mechanochemical gram-scale synthesis of three new mixed-ligand phosphonate-based MOFs, {Co(H₂PhDPA)(4,4'-bipy)(H₂O)·2H₂O}_n (BAM-1), {Fe(H₂PhDPA)(4,4'-bipy) (H₂O)·2H₂O}_n (BAM-2), and {Cu(H₂PhDPA)(dpe)₂(H₂O)₂·2H₂O}_n (BAM-3) [where H₂PhDPA = phenylene diphosphonate, 4,4'-bipy = 4,4'-bipyridine, and dpe = 1,2-di(4-pyridyl)ethylene]. Single-crystal X-ray diffraction measurements revealed that BAM-1 and BAM-2 are isostructural and possess a three-dimensional (3D) network structure comprising one-dimensional (1D) channels filled with guest water molecules. Instead, BAM-3 displays a 1D network structure extended into a 3D supramolecular structure through hydrogen-bonding and π-π interactions. In all three structures, guest water molecules are interconnected with the uncoordinated acidic hydroxyl groups of the phosphonate moieties and coordinated water molecules by means of extended hydrogen-bonding interactions. BAM-1 and BAM-2 showed a gradual increase in proton conductivity with increasing temperature and reached 4.9 × 10^-5 and 4.4 × 10^-5 S cm^-1 at 90 °C and 98% relative humidity (RH). The highest proton conductivity recorded for BAM-3 was 1.4 × 10^-5 S cm^-1 at 50 °C and 98% RH. Upon further heating, BAM-3 undergoes dehydration followed by a phase transition to another crystalline form which largely affects its performance. All compounds exhibited a proton hopping (Grotthuss model) mechanism, as suggested by their low activation energy.

New insights into the selective adsorption mechanism of cationic and anionic dyes using MIL-101(Fe) metal-organic framework: Modeling and interpretation of physicochemical parameters

In the current study, iron-based metal organic framework (MOF) MIL-101(Fe) was successfully prepared via a facile solvothermal method. The as-synthesized MIL-101(Fe) was characterized by XRD, FE-SEM, FTIR, TGA and zeta potential techniques, and then employed as an adsorbent for methyl orange (MO) and methylene blue (MB) dyes. The adsorbed quantities of MO (1067 to 831 mg/g) were higher than those of MB (402 to 353 mg/g) indicating the high selectivity of MIL-101(Fe) towards the anionic dye at all temperatures (20-60 °C). Adsorption processes of MO and MB followed the pseudo-second order kinetics and the Langmuir equilibrium model. The interaction mechanism at a molecular level was analyzed and deeply interpreted via the advanced multilayer adsorption model. Steric parameters indicated that MO molecular aggregation (n) was 0.95-1.33 thus signifying the presence of multi-docking and multi-interactions mechanisms. The aggregated number of MB was superior to unity (i.e., n = 1.17-1.78) suggesting a vertical adsorption position and a multi-interactions mechanism at all operating temperatures. The density of MIL-101(Fe) active sites (D_{M =} 77.33-52.38 mg/g for MB and 149.91-107.07 for MO) and the total adsorbed dye layers (N_t = 3.12-2.49 for MB and 5.36-3.67 for MO) resulted in improving the adsorption capacities of MO dye. The adsorption energies ranged from 8.89 to 33.73 kJ/mol and they displayed that MO and MB uptake processes were exothermic controlled by physical interactions at all temperatures. Regeneration results indicated that this adsorbent can be reutilized without a significant loss in its removal efficiency after five adsorption-desorption cycles. Overall, the adsorption capacity, chemical stability, and regeneration performance of MIL-101(Fe) support its application as a very promising adsorbent for the removal of organic hazardous pollutants from water.

Four Anderson-type [TeMo6O24]6−-based metal–organic complexes with a new bis(pyrimidine)-bis(amide): multifunctional electrochemical and adsorption performances

Four isostructural Anderson-type POM-based metal–organic complexes derived from a new bis(pyrimidine)-bis(amide) ligand were synthesized, showing multifunctional electrochemical sensing activities and good adsorption performances for organic dyes.

Synthesis of new Zn-decorated metal-organic frameworks for enhanced removal of carcinogenic textile dye: equilibrium and kinetic modeling studies

This paper describes the synthesis and characterization of Zn²⁺ decorated (adipic and terephthalic acid as linkers) piperazine-based metal-organic framework (P-MOFs) and their extraction behavior toward the Chicago sky blue (CSB) dye. The formation of Zn²⁺-decorated P-MOFs was confirmed by FT-IR spectroscopy, energy-dispersive spectroscopy, X-ray diffraction, BET surface area analysis and TGA. Adsorption behavior of the synthesized P-MOFs was explored through solid-phase adsorption (batch method) prior to UV-Vis spectrophotometric determination. Adsorption parameters, including adsorbent dosage, pH of solution, dye concentration, and time, were optimized. Excellent percentage removal of 94% and 95% for AP-Zn-MOF and TP-Zn-MOF, respectively, was achieved at pH 7.5. Kinetics studies indicated that the synthesized adsorbents AP-Zn-MOF and TP-Zn-MOF followed the pseudo-second-order rate model with R² value 0.9989. The Freundlich isotherm with high R² value as compared to Langmuir isotherm indicated that CSB adsorption for the synthesized MOFs follows multilayer adsorption.

Nanoscale Metal-Organic Frameworks: Recent developments in synthesis, modifications and bioimaging applications

Porous Metal-Organic Frameworks (MOFs) have emerged as eye-catching materials in recent years. They are widely used in numerous fields of chemistry thanks to their desirable properties. MOFs have a key role in the development of bioimaging platforms that are hopefully expected to effectually pave the way for accurate and selective detection and diagnosis of abnormalities. Recently, many types of MOFs have been employed for detection of RNA, DNA, enzyme activity and small-biomolecules, as well as for magnetic resonance imaging (MRI) and computed tomography (CT), which are valuable methods for clinical analysis. The optimal performance of the MOF in the bio-imaging field depends on the core structure, synthesis method and modifications processes. In this review, we have attempted to present crucial parameters for designing and achieving an efficient MOF as bioimaging platforms, and provide a roadmap for researchers in this field. Moreover, the influence of modifications/fractionalizations on MOFs performance has been thoroughly discussed and challenging problems have been extensively addressed. Consideration is mainly focused on the principal concepts and applications that have been achieved to modify and synthesize advanced MOFs for future applications.

Adsorptive removal of hazardous organics from water and fuel with functionalized metal-organic frameworks: Contribution of functional groups

The purification of contaminated water and fuel is very important for our sustainability. Adsorptive removal has attracted significant attention because of possible applications in industry and the rapid development of metal-organic frameworks (MOFs), which can be competitive adsorbents. In this review, the possible/competitive purification of water (contaminated with organics) and fuel (composed of S- and N-Containing compounds) via adsorption using MOFs, especially those with various functional groups (FGs), will be discussed. The contribution of FGs such as -OH, -COOH, -SO₃H, -NH₂, and -NH₃⁺ to adsorption/purification will be analyzed in detail, not only to understand the plausible adsorption mechanism but also to utilize specific FGs in adsorption. Moreover, methods for introducing FGs onto MOFs will be summarized. Finally, the prospects for both adsorption/removal and emerging fields will be suggested. Studies for practical applications in industry with shaped MOFs from inexpensive route will be important. The solution pH should be considered for the adsorption of aqueous solution. Applications of MOFs in other fields like storage/delivery and enrichment of analytes might be deeply studied.

A critical review on recent developments in MOF adsorbents for the elimination of toxic heavy metals from aqueous solutions

Effective and substantial remediation of contaminants especially heavy metals from water is still a big challenge in terms of both environmental and biological perspectives because of their adverse effects on the human health. Many techniques including adsorption, ion exchange, co-precipitation, chemical reduction, ultrafiltration, etc. are reported for eliminating heavy metal ions from the water. However, adsorption has preferred because of its simple and easy handlings. Several types of adsorbents are observed and documented well for the purpose. Recently, highly porous metal-organic frameworks (MOFs) were developed by incorporating metals and organic ligands together and claimed as potent adsorbents for the remediation of highly toxic heavy metals from the aqueous solutions due to their unique features like greater surface area, high chemical stability, green and reuse material, etc. In this review, the authors discussed systematically some recent developments about secure MOFs to eliminate the toxic metals such as arsenic (both arsenite and arsenate), chromium(VI), cadmium (Cd), mercury (Hg) and lead (Pb). MOFs are observed as the most efficient adsorbents with greater selectivity as well as high adsorption capacity for metallic contamination. Graphical abstract.

In Situ Conversion of Metal-Organic Frameworks into VO2 -V3 S4 Heterocatalyst Embedded Layered Porous Carbon as an "All-in-One" Host for Lithium-Sulfur Batteries

Although lithium-sulfur batteries exhibit a fivefold higher energy density than commercial lithium-ion batteries, their volume expansion and insulating nature, and intrinsic polysulfide shuttle have hindered their practical application. An alternative sulfur host is necessary to realize porous, conductive, and polar functions; however, there is a tradeoff among these three critical factors in material design. Here, the authors report a layered porous carbon (LPC) with VO₂ /V₃ S₄ heterostructures using one-step carbonization-sulfidation of metal-organic framework templates as a sulfur host that meets all the criteria. In situ conversion of V-O ions into V₃ S₄ nuclei in the confined 2D space generated by dynamic formation of the LPC matrix creates {200}-facet-exposed V₃ S₄ nanosheets decorated with tiny VO₂ nanoparticles. The VO₂ /V₃ S₄  @ LPC composite facilitates high sulfur loading (70 wt%), superior energy density (1022 mA h g^-1 at 0.2 C, 100 cycles), and long-term cyclability (665 mA h g^-1 at 1 C, 1000 cycles). The enhanced Li-S chemistry is attributed to the synergistic heterocatalytic behavior of polar VO₂ and conductive V₃ S₄ in the soft porous LPC scaffold, which accelerates polysulfide adsorption, conversion, and charge-transfer ability simultaneously.

Removal of Particulate Matters with Isostructural Zr-Based Metal-Organic Frameworks Coated on Cotton: Effect of Porosity of Coated MOFs on Removal

Effective removal of particulate matters (PMs) from air is very important for our safe environment, health, and sustainability. In this study, isostructural (with the same topology of fcu) Zr-metal-organic frameworks (Zr-MOFs) such as UiO-66, UiO-67, and DUT-52 (with different porosity) were coated onto cotton and utilized in PM removal from air to understand the contribution of MOFs in improving the performances of air filters. Moreover, UiO-66s with different porosities were also prepared under different conditions from the same reaction mixture. Experiments to remove PMs such as PM2.5 and PM10 showed a critical role of porosity of coated MOFs in the PM removal. Or, the removal efficiency or quality factor increased linearly with the increasing surface area of all the studied MOFs, irrespective of the applied linkers (for synthesizing different MOFs) and synthesis conditions (for different porosities of UiO-66s). Therefore, this work confirms, for the first time, that the porosity of MOF is one of the most important parameters to improve the performance of air filter (to remove PMs) that is modified with coated MOFs. Moreover, we could suggest why porous materials with small pores were effective in capturing PMs (larger in size than pores of porous materials) from air.

Synthesis of Metal-Organic Frameworks MIL-101(Cr)-NH2 Containing Phosphorous Acid Functional Groups: Application for the Synthesis of N-Amino-2-pyridone and Pyrano [2,3-c]pyrazole Derivatives via a Cooperative Vinylogous Anomeric-Based Oxidation

In the current paper, we successfully developed and used metal-organic frameworks (MOFs) based on MIL-101(Cr)-NH2 with phosphorus acid functional groups MIL-101(Cr)-N(CH2PO3H2)2. The synthesized metal-organic frameworks (MOFs) as a multi-functional heterogeneous and nanoporous catalyst were used for the synthesis of N-amino-2-pyridone and pyrano [2,3-c]pyrazole derivatives via reaction of ethyl cyanoacetate or ethyl acetoacetate, hydrazine hydrate, malononitrile, and various aldehydes. The final step of the reaction mechanism was preceded by a cooperative vinylogous anomeric-based oxidation. Recycle and reusability of the described catalyst MIL-101(Cr)-N(CH2PO3H2)2 were also investigated.

Facile fabrication of bimetallic Fe–Mg MOF for the synthesis of xanthenes and removal of heavy metal ions

This work reported the preparation of Mg-MOF, Fe-MOF and Fe–Mg MOF by a solvothermal technique and their characterization with FT-IR, XRD, SEM, EDS, TEM and S_BET analyses. The nanoparticle diameter ranged from 3.1 to 10.9 nm. The acidity of the MOFs was measured by nonaqueous potentiometric titration of n-butylamine. It was observed that the formation of a bimetallic MOF sharply increases the surface acidity and the catalytic activity. The catalytic results of the Fe–Mg MOF catalyzing the synthesis of 14-aryl-14-H-dibenzo[a,j]xanthenes in comparison with those of parent MOFs showed a higher yield of the desired product in a lower time and among various Fe : Mg, the (0.6 : 1) Fe–Mg MOF showed the highest catalytic activity and acidity. Even after the 4^th run, the Fe–Mg MOF catalyst still maintained nearly the initial catalytic activity. The adsorption performance of Mg-MOF, Fe-MOF and Fe–Mg MOF was evaluated by batch experiments. The effect of contact time, the solution pH, the adsorbent dose and the initial concentration of the heavy metal ions was discussed. It was found that the capacity of the bimetallic Fe–Mg MOF for Pb(ii), Cu(ii) and Cd(ii) adsorption was higher than that of the Mg-MOF and Fe-MOF, the kinetic data followed the pseudo-second-order kinetic model and the isothermal data obeyed the Langmuir isotherm model. The mechanism of the removal of the heavy metal ions was discussed.

This work reported the preparation of Mg-MOF, Fe-MOF and Fe–Mg MOF by a solvothermal technique and their characterization with FT-IR, XRD, SEM, EDS, TEM and S_BET analyses.

Metal Organic Frameworks as Desulfurization Adsorbents of DBT and 4,6-DMDBT from Fuels

Ultradeep desulfurization of fuels is a method of enormous demand due to the generation of harmful compounds during the burning of sulfur-containing fuels, which are a major source of environmental pollution. Among the various desulfurization methods in application, adsorptive desulfurization (ADS) has low energy demand and is feasible to be employed at ambient conditions without the addition of chemicals. The most crucial factor for ADS application is the selection of the adsorbent, and, currently, a new family of porous materials, metal organic frameworks (MOFs), has proved to be very effective towards this direction. In the current review, applications of MOFs and their functionalized composites for ADS are presented and discussed, as well as the main desulfurization mechanisms reported for the removal of thiophenic compounds by various frameworks. Prospective methods regarding the further improvement of MOF's desulfurization capability are also suggested.

Preparation of polydopamine-modified zeolitic imidazolate framework-8 functionalized electrospun fibers for efficient removal of tetracycline

This work shows a simple and environmental friendly methodology to obtain a kind of polydopamine coating assisted preparation of zeolitic imidazolate framework-8 (ZIF-8) functionalized composite electrospun fiber (ZIF-8/PDA/PAN fibers) adsorbent. Characterization of the composite electrospun fiber was carried out and the tetracycline (TC) adsorption properties from water were also studied in detail. At the same time, principle adsorption mechanisms were thoroughly studied. The results show that the pseudo-second-order model can simulate sorption kinetics well, while sorption isotherms are able to significantly conform to the Freundlich model, and the adsorption capacity of the fibers can reach 478.18 mg/g at 298 K. In addition, the Weber-Morris model indicates that the processes of adsorption of ZIF-8/PDA/PAN fibers for TC involve surface adsorption as well as intraparticle diffusion, and the limit rate step is not only the intraparticle diffusion but also the binding of the sorbate to the sorbent. Moreover, the adsorption efficiency toward TC by ZIF-8/PDA/PAN fibers still reached over 85% of its initial adsorption capacity after five adsorption/desorption cycles, which signified that the adsorbents is stable and recyclable. This work indicates that the obtained ZIF-8/PDA/PAN fibers have practical application prospects in the field of antibiotic adsorption.

The first water-based synthesis of Ce(iv)-MOFs with saturated chiral and achiral C4-dicarboxylate linkers

Six different chiral and achiral alkane dicarboxylic C₄-acids resulted in the formation of Ce(iv)-MOFs crystallizing in three different framework topologies.

Synthesis and crystal structures of a copper(ii) dinuclear complex and zinc(ii) coordination polymers as materials for efficient oxidative desulfurization of dibenzothiophene

Dinuclear copper(ii) complex [Cu₂(BAc)₄(QX)₂], and 2D zinc(ii) coordination polymer, [Zn(TDPA)₂(TMPy)₂]_n, presented high oxidation and adsorption thermodynamics for dibenzothiophene sulfoxide (DBTO).

Well-dispersed Ni or MnO nanoparticles on mesoporous carbons: preparation via carbonization of bimetallic MOF-74s for highly reactive redox catalysts

A series of metal-organic framework-74s (MOF-74s), composed of two different metallic species (Zn/Ni or Zn/Mn in various compositions), were synthesized, and Ni or MnO-doped carbonaceous materials were first prepared by pyrolysis of the MOFs under an inert environment for catalytic applications. These MOF-derived nanomaterials (MDNMs), obtained by pyrolysis of MOF-74s, were characterized thoroughly to understand their phase, porosity, particle size, dispersion, and composition. With increasing Zn content in the bimetallic MOF-74s, the porosity of the MDNMs increased but the size and content of Ni or MnO in the MDNMs decreased monotonously. One MDNM(75Zn25Mn), prepared from MOF-74(75%Zn/25%Mn), showed noticeably higher activity in the oxidation of benzyl alcohol as compared with not only the MDNM(xZnyMn)s but also MnOx-loaded carbon or loaded γ-alumina (or, MDNM(75Zn25Mn) showed ∼54 times turnover frequency (TOF) to that of MnO/activated carbon). MDNM(75Zn25Mn) was also effective in the oxidative removal of dibenzothiophene from a model fuel. Moreover, MDNM(75Zn25Ni), prepared from MOF-74(75%Zn/25%Ni), had the highest TOF in the reduction of 4-nitrophenol among various MDNM(xZnyNi)s. The highest activity of MDNM(75Zn25Mn) and MDNM(75Zn25Ni), even with the lowest Mn and Ni contents in the respective MDNMs, for oxidation and reduction in several cycles might be due to the well-dispersed MnO (and Ni) and high porosity with mesopores. Therefore, it can be suggested that pyrolysis of mixed-metal MOFs such as MOF-74s can be a facile way to obtain highly effective and recyclable heterogeneous catalysts, with well-dispersed active species in very small sizes, for various organic reactions.

Adsorptive removal of indole and quinoline from model fuel using adenine-grafted metal-organic frameworks

A highly porous metal-organic framework (MOF), MIL-101, was modified for the first time with the nucleobase adenine (Ade) by grafting onto the MOF. The Ade-grafted MOF, Ade-MIL-101, was further protonated to obtain P-Ade-MIL-101, and these MOFs were utilized to remove nitrogen-containing compounds (NCCs) (such as indole (IND) and quinoline (QUI)) from a model fuel by adsorption. These functionalized MOFs exhibited remarkable adsorption performance for NCCs compared with that shown by commercial activated carbon (AC) and pristine MIL-101, even though the porosities of the functionalized-MOFs were lower than that of pristine MIL-101. P-Ade-MIL-101 has 12.0 and 10.8 times capacity to that of AC for IND and QUI adsorption, respectively; its adsorption performance was competitive with that of other reported adsorbents. The remarkable adsorption of IND and QUI by Ade-MIL-101 was attributed to H-bonding. H-bonding combined with cation-π interactions was proposed as the mechanism for the removal of IND by P-Ade-MIL-101, whereas acid-base interactions were thought to be responsible for QUI adsorption by P-Ade-MIL-101. Moreover, P-Ade-MIL-101 can be regenerated without any severe degradation and used for successive adsorptions. Therefore, P-Ade-MIL-101 was recommended as an effective adsorbent for fuel purification by adsorptive removal of NCCs.

Adsorptive removal of aromatic hydrocarbons from water over metal azolate framework-6-derived carbons

Metal azolate framework-6 (MAF-6) was pyrolyzed at 1000°C to yield MOF-derived carbons (MCs). The obtained MCs were used to eliminate aromatic hydrocarbons, including polyaromatic hydrocarbons (PAHs; e.g., naphthalene (NAP), anthracene (ATC), and pyrene (PRN)) and benzene (BZ) from water via adsorption. The adsorption results over the MCs were compared with that of pristine MAF-6 and commercial activated carbon (AC). MC obtained after 24h (MC-24) exhibited a remarkable adsorption efficiency compared to that of the other MCs (obtained after different durations), MAF-6, and AC. For example, MC-24 led to adsorptions of NAP around 17 and 2.5 times those of pristine MAF-6 and AC, respectively. Or, the maximum adsorption capacities (Q₀) of MAF-6, AC and MC-24 for NAP were 14, 104 and 237mg/g, respectively. Moreover, Q₀ values of MC-24 for ATC and PRN were also very high of 284 and 307mg/g, respectively. Based on the properties of PAHs and the hydrophobicity of MC-24, hydrophobic interaction was suggested as the main mechanism for the adsorption of PAHs and BZ. In addition, MC-24 can be recycled by washing with acetone with little loss in performance. Therefore, MC-24 is recommended as a competitive adsorbent for aromatic hydrocarbon removal from water.

Effective Formaldehyde Capture by Green Cyclodextrin-Based Metal-Organic Framework

A kind of metal-organic framework made from γ-cyclodextrin (γ-CD) and potassium ions were explored as excellent formaldehyde (HCHO) absorbents. The adsorption capacity and speed of γ-CD-MOF-K are both about 9 times higher than those of activated carbon, which are attributed to the porous structure and synergistic effect of hydrogen bonding and host-guest interactions.

Synthesis of HKUST-1 and zeolite beta composites for deep desulfurization of model gasoline

Composites of zeolite beta microspheres@nanosized HKUST-1 and micro-octahedron-shaped HKUST-1@nanosized zeolite beta were fabricated to remove thiophene from model oil. The two composite materials exhibited a higher adsorption capacity and faster adsorption rate than their corresponding mechanical mixture of HKUST-1 and zeolite beta when the sulfur concentration was at around 100 ppmw.

Zeolite beta microspheres@nanosized HKUST-1 and micro-octahedron-shaped HKUST-1@nanosized zeolite beta composites were synthesized to remove thiophene from model oil.

Two metal–organic frameworks based on pyridyl–tricarboxylate ligands as size-selective catalysts for solvent-free cyanosilylation reaction

Two novel 3D metal–organic frameworks based on multifunctional pyridyl–tricarboxylate ligands as size-selective heterogeneous catalysts for the cyanosilylation of acetaldehydes.

Three-dimensional iron(ii) porous coordination polymer exhibiting carbon dioxide-dependent spin crossover

A three-dimensional iron(ii) porous coordination polymer has been observed spin crossover behaviours through the sorption of H₂O and CO₂, respectively.

Adsorptive denitrogenation of fuel over molecularly imprinted poly-2-(1H-imidazol-2-yl)-4-phenol microspheres

Molecularly imprinted poly 2-(1H-imidazol-2-yl)-4-phenol prepared by suspension polymerization of 2-(1H-imidazol-2-yl)-4-vinylphenol in the presence of selected nitrogen containing compounds showed adsorption selectivity for target nitrogen-containing compounds in fuel oil.