Exciton-Phonon Coupling in Single ZnCdSe-Dot/CdS-Rod Nanocrystals with Engineered Band Gaps from Type-II to Type-I

Exciton-phonon coupling limits the homogeneous emission line width of nanocrystals. Hence, a full understanding of this is crucial. In this work, we statistically investigate exciton-phonon coupling by performing single-particle spectroscopy on colloidal Zn1-x Cd x Se/CdS and CdSe/CdS dot-in-rod nanocrystals at cryogenic temperatures (T ≈ 10 K). In situ cation exchange enables us to analyze different band alignments and, thereby, different charge-carrier distributions. We find that the relative intensities of the longitudinal optical S- and Se-type phonon replicas correlate with the charge-carrier distribution. Our experimental findings are complemented with quantum mechanical calculations within the effective mass approximation that hint at the relevance of surface charges.

Luminescent carbon dots versus quantum dots and gold nanoclusters as sensors

Ultra-small nanoparticles, including quantum dots, gold nanoclusters (AuNCs) and carbon dots (CDs), have emerged as a promising class of fluorescent material because of their molecular-like properties and widespread applications in sensing and imaging. However, the fluorescence properties of ultra-small gold nanoparticles (i.e., AuNCs) and CDs are more complicated and well distinguished from conventional quantum dots or organic dye molecules. At this frontier, we highlight recent developments in the fundamental understanding of the fluorescence emission mechanism of these ultra-small nanoparticles. Moreover, this review carefully analyses the underlying principles of ultra-small nanoparticle sensors. We expect that this information on ultra-small nanoparticles will fuel research aimed at achieving precise control over their fluorescence properties and the broadening of their applications.

Electronic Structure and Excited State Dynamics of Cadmium Chalcogenide Nanorods

The cylindrical quasi-one-dimensional shape of colloidal semiconductor nanorods (NRs) gives them unique electronic structure and optical properties. In addition to the band gap tunability common to nanocrystals, NRs have polarized light absorption and emission and high molar absorptivities. NR-shaped heterostructures feature control of electron and hole locations as well as light emission energy and efficiency. We comprehensively review the electronic structure and optical properties of Cd-chalcogenide NRs and NR heterostructures (e.g., CdSe/CdS dot-in-rods, CdSe/ZnS rod-in-rods), which have been widely investigated over the last two decades due in part to promising optoelectronic applications. We start by describing methods for synthesizing these colloidal NRs. We then detail the electronic structure of single-component and heterostructure NRs and follow with a discussion of light absorption and emission in these materials. Next, we describe the excited state dynamics of these NRs, including carrier cooling, carrier and exciton migration, radiative and nonradiative recombination, multiexciton generation and dynamics, and processes that involve trapped carriers. Finally, we describe charge transfer from photoexcited NRs and connect the dynamics of these processes with light-driven chemistry. We end with an outlook that highlights some of the outstanding questions about the excited state properties of Cd-chalcogenide NRs.

Temperature and Composition Dependent Optical Properties of CdSe/CdS Dot/Rod-Based Aerogel Networks

Employing nanocrystals (NCs) as building blocks of porous aerogel network structures allows the conversion of NC materials into macroscopic solid structures while conserving their unique nanoscopic properties. Understanding the interplay of the network formation and its influence on these properties like size-dependent emission is a key to apply techniques for the fabrication of novel nanocrystal aerogels. In this work, CdSe/CdS dot/rod NCs possessing two different CdSe core sizes were synthesized and converted into porous aerogel network structures. Temperature-dependent steady-state and time-resolved photoluminescence measurements were performed to expand the understanding of the optical and electronic properties of these network structures generated from these two different building blocks and correlate their optical with the structural properties. These investigations reveal the influence of network formation and aerogel production on the network-forming nanocrystals. Based on the two investigated NC building blocks and their aerogel networks, mixed network structures with various ratios of the two building blocks were produced and likewise optically characterized. Since the different building blocks show diverse optical response, this technique presents a straightforward way to color-tune the resulting networks simply by choosing the building block ratio in connection with their quantum yield.

Quasi-Type II Core-Shell Perovskite Nanocrystals for Improved Structural Stability and Optical Gain

In recent years, core-shell lead halide perovskite nanocrystals (PeNCs) and their devices have attracted intensive attention owing to nearly perfect optoelectronic properties. However, the complex photophysical mechanism among them is still unclear. Herein, monodispersed core-shell PeNCs coated with an all-inorganic cesium lead bromide (CsPbBr₃) shell epitaxially grown on the surface of formamidinium lead bromide (FAPbBr₃) PeNCs were synthesized. Through power- and temperature-dependent photoluminescence (PL) measurements, it is found that the electronic structure of the core-shell FAPbBr₃/CsPbBr₃ PeNCs has a quasi-type II band alignment. The presence of Cs⁺ in the shell limits ion migration and helps to stabilize structural and optical properties. On this basis, after being exposed to pulsed nanosecond laser for a period, an amplified spontaneous emission (ASE) can be observed, which is attributed to the effective passivation induced by laser irradiation on defects at the interface. The ASE threshold of the core-shell PeNCs showing high structural and optical stability is 447 nJ/cm² under pulsed nanosecond optical pumping. The results that are demonstrated here provide a new idea and perspective for improving the stability of perovskite and can be of practical interest for the utilization of the core-shell PeNCs in optoelectronic devices.

Temperature-dependence on the optical properties of chitosan carbon dots in the solid state

We report the synthesis of chitosan-derived aminated carbon dots with dual fluorescence bands and their influence on the morphology, absorption and emission spectral profiles as well as on the band gap energy in relation to thermal treatment after synthesis. To unravel these changes, we performed spectroscopic measurements in the solid state on two stages at temperatures ranging from 303 to 453 K. For the first heating stage, the emission spectrum showed a 20 nm red shift and a new absorption band at 350 nm, possibly related to new bonds and/or nitrogenous molecular fractions. For the second heating stage in the same temperature range, no displacements in the emission spectrum were observed and both the energy gap and bandwidths for the two emission bands are practically constant, indicating a change nitrogen moiety exposed on the surface. Furthermore, through atomic force microscopy it was noted that the morphology and size of the CDs were not significantly affected by the increase in temperature. It is noteworthy that the values of the Huang-Rhys factor, respectively, 2.584 × 10-10 and 2.315 × 10-9 for band I and II emission after the second heating indicate a mechanism of weak electron-phonon interactions. This work may open a novel perspective for the development of new surface modulation strategies for carbon dots subjected to thermal treatment in the solid state.

Modulated interlayer charge transfer dynamics in a monolayer TMD/metal junction

The performance of optoelectronic devices based on monolayer transition-metal dichalcogenide (mTMD) semiconductors is significantly affected by the contact at the mTMD-metal interface, which is dependent on interlayer interactions and coupling. Here, we report a systematic optical method to investigate the interlayer charge transfer and coupling in a mTMD-metal heterojunction. Giant photoluminescence (PL) quenching was observed in a monolayer MoS2/Pd (1L MoS2/Pd) junction which is mainly due to the efficient interlayer charge transfer between Pd and MoS2. 1L MoS2/Pd also exhibits an increase in the PL quenching factor (η) as the temperature decreases, due to a reduction of the interlayer spacing. Annealing experiments were also performed which supported interlayer charge transfer as the main mechanism for the increase of η. Moreover, a monolayer MoS2/Au (1L MoS2/Au) junction was fabricated for engineering the interlayer charge transfer. Interestingly, a narrowing effect of the full width at half maximum (FWHM) was encountered as the junctions changed from 1L MoS2/SiO2 → 1L MoS2/Au → 1L MoS2/Pd, possibly originating from a change of the doping level induced weakening of exciton-carrier scattering. Our results deepen the understanding of metal-semiconductor junctions for further exploring fundamental phenomena and enabling high-performance devices using mTMD-metal junctions.

Defect Engineering in Few-Layer Phosphorene

Defect engineering in 2D phosphorene samples is becoming an important and powerful technique to alter their properties, enabling new optoelectronic applications, particularly at the infrared wavelength region. Defect engineering in a few-layer phosphorene sample via introduction of substrate trapping centers is realized. In a three-layer (3L) phosphorene sample, a strong photoluminescence (PL) emission peak from localized excitons at ≈1430 nm is observed, a much lower energy level than free excitonic emissions. An activation energy of ≈77 meV for the localized excitons is determined in temperature-dependent PL measurements. The relatively high activation energy supports the strong stability of the localized excitons even at elevated temperature. The quantum efficiency of localized exciton emission in 3L phosphorene is measured to be approximately three times higher than that of free excitons. These results could enable exciting applications in infrared optoelectronics.

Elevated Temperature Photophysical Properties and Morphological Stability of CdSe and CdSe/CdS Nanoplatelets

Elevated temperature optoelectronic performance of semiconductor nanomaterials remains an important issue for applications. Here we examine 2D CdSe nanoplatelets (NPs) and CdS/CdSe/CdS shell/core/shell sandwich NPs at temperatures ranging from 300 to 700 K using static and transient spectroscopies as well as in situ transmission electron microscopy. NPs exhibit reversible changes in PL intensity, spectral position, and emission line width with temperature elevation up to ∼500 K, losing a factor of ∼8 to 10 in PL intensity at 400 K relative to ambient. Temperature elevation above ∼500 K yields thickness-dependent, irreversible degradation in optical properties. Electron microscopy relates stability of the core-only NP morphology up to 555 and 600 K for the four and five monolayer NPs, respectively, followed by sintering and evaporation at still higher temperatures. Reversible PL loss, based on differences in decay dynamics between time-resolved photoluminescence and transient absorption, results primarily from hole trapping in both NPs and sandwich NPs.

Colloidal Dual-Diameter and Core-Position-Controlled Core/Shell Cadmium Chalcogenide Nanorods

To capitalize on shape- and structure-dependent properties of semiconductor nanorods (NRs), high-precision control and exquisite design of their growth are desired. Cadmium chalcogenide (CdE; E = S or Se) NRs are the most studied class of such, whose growth exhibits axial anisotropy, i.e., different growth rates along the opposite directions of {0001} planes. However, the mechanism behind asymmetric axial growth of NRs remains unclear because of the difficulty in instant analysis of growth surfaces. Here, we design colloidal dual-diameter semiconductor NRs (DDNRs) under the quantum confinement regime, which have two sections along the long axis with different diameters. The segmentation of the DDNRs allows rigorous assessment of the kinetics of NR growth at a molecular level. The reactivity of a terminal facet passivated by an organic ligand is governed by monomer diffusivity through the surface ligand monolayer. Therefore, the growth rate in two polar directions can be finely tuned by controlling the strength of ligand-ligand attraction at end surfaces. Building on these findings, we report the synthesis of single-diameter CdSe/CdS core/shell NRs with CdSe cores of controllable position, which reveals a strong structure-optical polarization relationship. The understanding of the NR growth mechanism with controllable anisotropy will serve as a cornerstone for the exquisite design of more complex anisotropic nanostructures.

Difference in hot carrier cooling rate between Langmuir-Blodgett and drop cast PbS QD films due to strong electron-phonon coupling

The carrier dynamics of lead sulphide quantum dot (PbS QD) drop cast films and closely packed ordered Langmuir-Blodgett films are studied with ultra-fast femtosecond transient absorption spectroscopy. The photo-induced carrier temperature is extracted from transient absorption spectra and monitored as a function of time delay. The cooling dynamics of carriers in PbS QDs suggest a reduction of the carrier energy loss rate at longer time delays through the retardation of the longitudinal optical (LO) phonon decay due to partial heating of acoustic phonon modes. A slowed hot carrier cooling time up to 116 ps is observed in the drop cast film. A faster cooling rate was also observed in the highly compact Langmuir-Blodgett film due to the enhanced carrier-LO phonon coupling strength arising from the Coulombic interaction in neighboring QDs, which is verified by temperature dependent steady state PL measurements.

Band-edge oscillator strength of colloidal CdSe/CdS dot-in-rods: comparison of absorption and time-resolved fluorescence spectroscopy

We studied the oscillator strength f_gap of the band gap transition in heteronanocrystals (hNCs) with a spherical CdSe core embedded in an elongated CdS shell. A comparison with f_gap of core-only CdSe NCs confirmed a reduction of the electron-hole overlap in hNCs with a band gap larger than 2.05 eV or smaller than 1.98 eV. However, the decrease in f_gap is limited to about 50% when compared to CdSe NCs, suggesting that residual confinement still localizes the electron near the core. We correlated f_gap with the radiative lifetime obtained from multiexponential photoluminescence (PL) decay traces. The different components were attributed to radiative decay, or deep and shallow carrier trapping, respectively, using the PL quantum efficiency (QE) as a guideline. Our data highlight the challenges associated when extracting the radiative decay, and demonstrate the added value of absorption spectroscopy to obtain the band-edge oscillator strength and the associated radiative recombination rate in colloidal hNCs.

Photo-electrochemical properties of quantum rods studied by scanning electrochemical microscopy

Scanning electrochemical microscopy (SECM) is used for studying the intrinsic photo-electrochemical properties of CdSe/CdS quantum rods.

Quantification of hot carrier thermalization in PbS colloidal quantum dots by power and temperature dependent photoluminescence spectroscopy

PbS QDs are studied as attractive candidates to be applied as hot carrier solar cell absorbers.

Synthesis and enzymatic photo-activity of an O2 tolerant hydrogenase-CdSe@CdS quantum rod bioconjugate

This communication reports on the preparation of stable and photo-active nano-heterostructures composed of O2 tolerant [NiFe] hydrogenase extracted from the Aquifex aeolicus bacterium grafted onto hydrophilic CdSe/CdS quantum rods in view of the development of H2/O2 biofuel cells. The resulting complex is efficient towards H2 oxidation, displays good stability and new photosensitive properties.

Exciton–phonon scattering and nonradiative relaxation of excited carriers in hydrothermally synthesized CdTe quantum dots

The strength of the exciton–LO-phonon coupling, as reflected in the Huang–Rhys parameter ‘S’, is found to increase from 1.13 to 1.51 with a reduction in CdTe QD size from 4.8 to 3.0 nm.

The enhancement of electron-phonon coupling in glutathione-protected Au25 clusters

Glutathione-protected Au25 clusters (Au25@GSH) are prospective for biological applications due to their biocompatibility and near infrared fluorescence. The weak electron-phonon coupling, however, restricts their applications in bioanalysis and therapeutics. Here we modify the properties of Au25@GSH by changing their ligands. The temperature dependent fluorescence shows that conjugation with different ligands results in modified temperature behavior. In particular, Au25@GSH-MPA evidently exhibits enhanced phonon coupling, therefore, resulting in a decrease in the emission energy and an increase in bandwidth upon increasing temperatures. The enhanced phonon coupling in modified Au25@GSH sheds new light on the future application of nanoclusters from early diagnosis towards therapeutics.

Indirect Exciton Formation due to Inhibited Carrier Thermalization in Single CdSe/CdS Nanocrystals

Temperature-dependent single-particle spectroscopy is used to study interfacial energy transfer in model light-harvesting CdSe/CdS core-shell tetrapod nanocrystals. Using alternating excitation energies, we identify two thermalized exciton states in single nanoparticles that are attributed to a strain-induced interfacial barrier. At cryogenic temperatures, emission from both states exemplifies the effects of intraparticle disorder and enables their simultaneous characterization, revealing that the two states are distinct in regards to emission polarization, spectral diffusion, and blinking.