Building mechanism for a high open-circuit voltage in an all-solution-processed tandem polymer solar cell

Chemically Engineered Titanium Oxide Interconnecting Layer for Multijunction Polymer Solar Cells

We report chemically tunable n-type titanium oxides using ethanolamine as a nitrogen dopant source. As the amount of ethanolamine added to the titanium oxide precursor during synthesis increases, the Fermi level of the resulting titanium oxides (ethanolamine-incorporated titanium oxides) significantly changes from -4.9 eV to -4.3 eV, and their free charge carrier densities are enhanced by two orders of magnitudes, reaching up to 5 × 1018 cm-3. Unexpectedly, a basic ethanolamine reinforces not only the n-type properties of titanium oxides, but also their basicity, which facilitates acid-base ionic junctions in contact with acidic materials. The enhanced charge carrier density and basicity of the chemically tuned titanium oxides enable multi-junction solar cells to have interconnecting junctions consisting of basic n-type titanium oxides and acidic p-type PEDOT:PSS to gain high open-circuit voltages of 1.44 V and 2.25 V from tandem and triple architectures, respectively.

In-Depth Comparative Study of the Cathode Interfacial Layer for a Stable Inverted Perovskite Solar Cell

Achieving long-term device stability is one of the most challenging issues that impede the commercialization of perovskite solar cells (PSCs). Recent studies have emphasized the significant role of the cathode interfacial layer (CIL) in determining the stability of inverted p-i-n PSCs. However, experimental investigations focusing on the influence of the CIL on PSC degradation have not been systematically carried out to date. In this study, a comparative analysis was performed on the PSC device stability by using four different CILs including practical oxides like ZnO and TiOx . A new implemented co-doping approach was found to results in high device performance and enhanced device stability. The PSC with a thick film configuration of chemically modified TiOx CIL preserves over 77 % of its initial efficiencies of 17.24 % for 300 h under operational conditions without any encapsulation. The PSCs developed are among the most stable reported for methylammonium lead iodide (MAPbI3 ) perovskite compositions.

Charge Generation and Recombination in High Fullerene Content Organic Bulk Heterojunction Solar Cells

Organic bulk heterojunction solar cells with a high fullerene content (larger than 70%) have been studied in this work. The device performances of this kind of solar cell could be tuned by adjusting the blend ratio in the active layer. An appropriate amount of p-type semiconductor in the high fullerene content active blend layer is beneficial for light absorbance and exciton dissociation. The proper energy alignment between the highest occupied molecular orbital of a p-type material and an n-type fullerene derivative has a strong influence on the exciton dissociation efficiency. In addition, the mechanism of photogenerated charge recombination in the solar cells has been identified through intensity-dependent current density-voltage (J-V) measurements and results show that the mechanisms governing the recombination are crucial for solar cell performance.

A series connection architecture for large-area organic photovoltaic modules with a 7.5% module efficiency

The fabrication of organic photovoltaic modules via printing techniques has been the greatest challenge for their commercial manufacture. Current module architecture, which is based on a monolithic geometry consisting of serially interconnecting stripe-patterned subcells with finite widths, requires highly sophisticated patterning processes that significantly increase the complexity of printing production lines and cause serious reductions in module efficiency due to so-called aperture loss in series connection regions. Herein we demonstrate an innovative module structure that can simultaneously reduce both patterning processes and aperture loss. By using a charge recombination feature that occurs at contacts between electron- and hole-transport layers, we devise a series connection method that facilitates module fabrication without patterning the charge transport layers. With the successive deposition of component layers using slot-die and doctor-blade printing techniques, we achieve a high module efficiency reaching 7.5% with area of 4.15 cm².

The fabrication of organic photovoltaic modules usually relies on patterning techniques which limit their efficiencies. Here, the authors propose a module structure that avoids the patterning steps, and use doctor-blade printing and slot-die coating to fabricate large-area modules reaching 7.5% efficiencies.

Enhanced performance and morphological evolution of PTB7:PC71BM polymer solar cells by using solvent mixtures with different additives

The performance of PTB7:PC₇₁BM solar cells was enhanced by using co-solvents, and their morphology was investigated by time-of-flight secondary ion mass spectrometry.

An efficient triple-junction polymer solar cell having a power conversion efficiency exceeding 11%

Tandem solar cells have the potential to improve photon conversion efficiencies (PCEs) beyond the limits of single-junction devices. In this study, a triple-junction tandem design is demonstrated by employing three distinct organic donor materials having bandgap energies ranging from 1.4 to 1.9 eV. Through optical modeling, balanced photon absorption rates are achieved and, thereby, the photo-currents are matched among the three subcells. Accordingly, an efficient triple-junction tandem organic solar cell can exhibit a record-high PCE of 11.5%.