Temperature-Enhanced mcr-1 Colistin Resistance Gene Detection with Electrochemical Impedance Spectroscopy Biosensors

Antibiotic resistance is now one of the biggest threats humankind is facing, as highlighted in a declaration by the General Assembly of the United Nations in 2016. In particular, the growing resistance rates of Gram-negative bacteria cause increasing concerns. The occurrence of the easily transferable, plasmid-encoded mcr-1 colistin resistance gene further worsened the situation, significantly enhancing the risk of the occurrence of pan-resistant bacteria. There is therefore a strong demand for new rapid molecular diagnostic tests for the detection of mcr-1 gene-associated colistin resistance. Electrochemical impedance spectroscopy (EIS) is a well-suited method for rapid antimicrobial resistance detection as it enables rapid, label-free target detection in a cost-efficient manner. Here, we describe the development of an EIS-based mcr-1 gene detection test, including the design of mcr-1-specific peptide nucleic acid probes and assay specificity optimization through temperature-controlled real-time kinetic EIS measurements. A new flow cell measurement setup enabled for the first time detailed real-time, kinetic temperature-controlled hybridization and dehybridization studies of EIS-based nucleic acid biosensors. The temperature-controlled EIS setup allowed single-nucleotide polymorphism discrimination. Target hybridization at 60 °C enhanced the perfect match/mismatch (PM/MM) discrimination ratio from 2.1 at room temperature to 3.4. A hybridization and washing temperature of 55 °C further increased the PM/MM discrimination ratio to 5.7 by diminishing the mismatch signal during the washing step while keeping the perfect match signal. This newly developed mcr-1 gene detection test enabled the direct, specific label, and amplification-free detection of mcr-1 gene harboring plasmids from Escherichia coli.

Ultrasensitive Electrochemical Impedance Detection of Mycoplasma agalactiae DNA by Low-Cost and Disposable Au-Decorated NiO Nanowall Electrodes

Nanostructured electrodes detecting bacteria or viruses through DNA hybridization represent a promising method, which may be useful in on-field applications where PCR-based methods are very expensive, time-consuming, and require trained personnel. Indeed, electrochemical sensors combine disposability, fast response, high sensitivity, and portability. Here, a low-cost and high-surface-area electrode, based on Au-decorated NiO nanowalls, demonstrates a highly sensitive PCR-free detection of a real sample of Mycoplasma agalactiae (Ma) DNA. NiO nanowalls, synthesized by aqueous methods, thermal annealing, and Au decoration, by electroless deposition, ensure a high-surface-area platform for successful immobilization of Ma thiolated probe DNA. The morphological, chemical, and electrochemical properties of the electrode were characterized, and a reproducible detection of synthetic Ma DNA was observed and investigated by impedance measurements. Electrochemical impedance spectroscopy (EIS) ascribed the origin of impedance signal to the Ma DNA hybridization with its probe immobilized onto the electrode. The electrode successfully discriminates between DNA extracted from healthy and infected sheep milk, showing the ability to detect Ma DNA in concentrations as low as 53 ± 2 copy number μL^-1. The Au-decorated NiO nanowall electrode represents a promising route toward PCR-free, disposable, rapid, and molecular detection.

Estimating Detection Limits of Potentiometric DNA Sensors Using Surface Plasmon Resonance Analyses

As the signals of potentiometric-based DNA ion-selective field effect transistor (ISFET) sensors differ largely from report to report, a systematic revisit to this method is needed. Herein, the hybridization of the target and the probe DNA on the sensor surface and its dependence on the surface probe DNA coverage and the ionic strength were systematically investigated by surface plasmon resonance (SPR). The maximum potentiometric DNA hybridization signal that could be registered by an ISFET sensor was estimated based on the SPR measurements, without considering buffering effects from any side interaction on the sensing electrode. We found that under physiological solutions (200 to 300 mM ionic strength), the ISFET sensor could not register the DNA hybridization events on the sensor surface due to Debye screening. Lowering the salt concentration to enlarge the Debye length would at the same time reduce the surface hybridization efficiency, thus suppressing the signal. This adverse effect of low salt concentration on the hybridization efficiency was also found to be more significant on the surface with higher probe coverage due to steric hindrance. With the method of diluting buffer, the maximum potentiometric signal generated by the DNA hybridization was estimated to be only around 120 mV with the lowest detection limit of 30 nM, occurring on a surface with optimized probe coverage and in the tris buffer with 10 mM NaCl. An alternative method would be to achieve high-efficiency hybridization in the buffer with high salt concentration (1 M NaCl) and then to perform potentiometric measurements in the buffer with low salt concentration (1 mM NaCl). Based on the characterization of the stability of the hybridized DNA duplexes on the sensor surface in low salt concentration buffer solutions, the estimated maximum potentiometric signal could be significantly higher using the alternative method. The lowest detection limit for this alternative method was estimated to be around 0.6 nM. This work can serve as an important quantitative reference for potentiometric DNA sensors.

Application of FRET Microscopy to the Study of the Local Environment and Dynamics of DNA SAMs on Au Electrodes

Immobilized DNA probe strands self-assembled on an electrode surface are the bases of many electrochemically based biosensors. Control or measurement of the local environment around each DNA molecule tethered to the electrode surface is needed because the local environment can influence the binding or hybridization efficiency of the target in solution. Measurement of this local environment in buffer or under electrochemical control can be challenging. Here we demonstrate the use of fluorescence microscopy and a Förster resonance energy transfer (FRET) methodology to characterize multicomponent DNA SAMs. The DNA SAMs that were studied were composed of a series of mole fraction ratios of alkylthiol-modified DNA which was labeled with either AlexaFluor488 or AlexaFluor647, a FRET donor and acceptor, respectively. The DNA SAMs were hybridized before assembly onto the electrode surface. Wide-field filter-based FRET microscopy was used to study the assembly of DNA SAMs onto gold bead electrodes. These single-crystal gold bead electrodes contain many surface crystallographic regions which enable the comparison of the adsorbed DNA local environment. These surfaces show that most surface modifications are uniformly prepared, and the FRET efficiency can be explained through simple surface density considerations. The FRET efficiency for different compositions of the donor and acceptor for these regions is also explained through 2D FRET modeling. Not all surfaces were similar to the (111) and (110) regions showing deviations from the expected FRET behavior. Also demonstrated is FRET imaging using a confocal microscope. This approach proves useful in the analysis of a more dynamic system, such as the analysis of reductive desorption of the mixed-component DNA SAM. FRET microscopy is useful for surface analysis of the DNA local environment, enabling a measure of the surface modification, local density, and clustering and eventually a new detection modality.

Beyond Simple Cartoons: Challenges in Characterizing Electrochemical Biosensor Interfaces

Design and development of surface-based biosensors is challenging given the multidisciplinary nature of this enterprise, which is certainly the case for electrochemical biosensors. Self-assembly approaches are used to modify the surface with capture probes along with electrochemical methods for detection. Complex surface structures are created to improve the probe-target interaction. These multicomponent surface structures are usually idealized in schematic representations. Many rely on the analytical performance of the sensor surface as an indication of the quality of the surface modification strategy. While directly linked to the eventual device, arguments for pursuing a more extensive characterization of the molecular environments at the surface are presented as a path to understanding how to make electrochemical sensors that are more robust, reliable with improved sensitivity. This is a complex task that is most often accomplished using methods that only report the average characteristics of the surface. Less often applied are methods that are sensitive to the probe (or adsorbate) present in nonideal configurations (e.g., aggregates, clusters, nonspecifically adsorbed). Though these structures may compose a small fraction of the overall modified surface, they have an uncertain impact on sensor performance and reliability. Addressing this issue requires application of imaging methods over a variety of length scales (e.g., optical microscopy and/or scanning probe microscopy) that provide valuable insight into the diversity of surface structures and molecular environments present at the sensing interface. Furthermore, using in situ analytical methods, while complex, can be more relevant to the sensing environment. Reliable measurements of the nature and extent of these features are required to assess the impact of these nonideal configurations on the sensing process. The development and use of methods that can characterize complex surface based biosensors is arguably required, highlighting the need for a multidisciplinary approach toward the preparation and analysis of the biosensor surface. In many ways, representing the surface without reliance on overly simplified cartoons will highlight these important considerations for improving sensor characteristics.

Electrochemical impedance spectroscopy measurements for determination of derivatized aldehydes in several matrices

A simple, selective and sensitive electrochemical method is described for the determination of different aldehydes at glassy carbon electrode using electrochemical impedance spectroscopy (EIS). The measurements were performed after their derivatization with 2,4-dinitrophenylhydrazine (DNPH) in acidic medium. The impedance measurements were investigated in the frequency range from 100 mHz to 100 kHz at a potential of 1.0 V versus Ag/AgCl. The Nyquist plots were modeled with a Randle's equivalent circuit. The charge transfer resistance was identified as the dependent parameter on relevant concentration of aldehydes (determined as their hydrazones). Under the optimized conditions, the linearity was established over the concentration range of 1000-0.05 μmol L^-1. The limits of detection (LODs) obtained were from 0.097 to 0.0109 μmol L^-1. Finally, the developed method has been applied to the determination of aldehydes in drinking water, orange juice and apple vinegar samples with relative standard deviations (RSDs) < 3.1% and acceptable recovery rate (around of 80%).

Electrostatically stabilized hybrids of carbon and maghemite nanoparticles: electrochemical study and application

Peculiar electrocatalytic properties emerged in electrostatically stabilized binary hybrids composed of maghemite nanoparticles and differently charged carbon nanomaterials.

Label- and amplification-free electrochemical detection of bacterial ribosomal RNA

Current approaches to molecular diagnostics rely heavily on PCR amplification and optical detection methods which have restrictions when applied to point of care (POC) applications. Herein we describe the development of a label-free and amplification-free method of pathogen detection applied to Escherichia coli which overcomes the bottleneck of complex sample preparation and has the potential to be implemented as a rapid, cost effective test suitable for point of care use. Ribosomal RNA is naturally amplified in bacterial cells, which makes it a promising target for sensitive detection without the necessity for prior in vitro amplification. Using fluorescent microarray methods with rRNA targets from a range of pathogens, an optimal probe was selected from a pool of probe candidates identified in silico. The specificity of probes was investigated on DNA microarray using fluorescently labeled 16S rRNA target. The probe yielding highest specificity performance was evaluated in terms of sensitivity and a LOD of 20 pM was achieved on fluorescent glass microarray. This probe was transferred to an EIS end point format and specificity which correlated to microarray data was demonstrated. Excellent sensitivity was facilitated by the use of uncharged PNA probes and large 16S rRNA target and investigations resulted in an LOD of 50 pM. An alternative kinetic EIS assay format was demonstrated with which rRNA could be detected in a species specific manner within 10-40min at room temperature without wash steps.

Potential-Assisted DNA Immobilization as a Prerequisite for Fast and Controlled Formation of DNA Monolayers

Highly reproducible and fast potential-assisted immobilization of single-stranded (ss)DNA on gold surfaces is achieved by applying a pulse-type potential modulation. The desired DNA coverage can be obtained in a highly reproducible way within minutes. Understanding the underlying processes occurring during potential-assisted ssDNA immobilization is crucial. We propose a model that considers the role of ions surrounding the DNA strands, the distance dependence of the applied potentials within the electrolyte solution, and most importantly the shift of the potential of zero charge during the immobilization due to the surface modification with DNA. The control of the surface coverage of ssDNA as well as the achieved speed and high reproducibility are seen as prerequisites for improved DNA-based bioassays.

Doping Level of Boron-Doped Diamond Electrodes Controls the Grafting Density of Functional Groups for DNA Assays

The impact of different doping levels of boron-doped diamond on the surface functionalization was investigated by means of electrochemical reduction of aryldiazonium salts. The grafting efficiency of 4-nitrophenyl groups increased with the boron levels (B/C ratio from 0 to 20,000 ppm). Controlled grafting of nitrophenyldiazonium was used to adjust the amount of immobilized single-stranded DNA strands at the surface and further on the hybridization yield in dependence on the boron doping level. The grafted nitro functions were electrochemically reduced to the amine moieties. Subsequent functionalization with a succinic acid introduced carboxyl groups for subsequent binding of an amino-terminated DNA probe. DNA hybridization significantly depends on the probe density which is in turn dependent on the boron doping level. The proposed approach opens new insights for the design and control of doped diamond surface functionalization for the construction of DNA hybridization assays.

An iridium oxide nanoparticle and polythionine thin film based platform for sensitive Leishmania DNA detection

A novel impedimetric label-free genosensor for highly sensitive DNA detection using a sensing platform based on thionine and iridium oxide nanoparticles.