Green solvent systems for material syntheses and chemical reactions

It is of great significance to develop environmentally benign, non-volatile and recyclable green solvents for different applications. This feature article overviews the properties of green solvent systems (e.g., ionic liquids, supercritical carbon dioxide, deep eutectic solvents and mixed green solvent systems) and their applications in (1) framework material syntheses, including metal-organic frameworks, covalent organic frameworks and hydrogen-bonded organic frameworks, and (2) CO2 conversion reactions, including photocatalytic and electrocatalytic reduction reactions. Finally, the future perspective for research on green solvent systems is proposed from different aspects.

On the evaluation of the carbon dioxide solubility in polymers using gene expression programming

Evaluation, prediction, and measurement of carbon dioxide (CO2) solubility in different polymers are crucial for engineers in various chemical applications, such as extraction and generation of novel materials. In this paper, correlations based on gene expression programming (GEP) were generated to predict the value of carbon dioxide solubility in three polymers. Results showed that the generated correlations could represent an outstanding efficiency and provide predictions for carbon dioxide solubility with satisfactory average absolute relative errors of 9.71%, 5.87%, and 1.63% for polystyrene (PS), polybutylene succinate-co-adipate (PBSA), and polybutylene succinate (PBS), respectively. Trend analysis based on Henry's law illustrated that increasing pressure and decreasing temperature lead to an increase in carbon dioxide solubility. Finally, outlier discovery was applied using the leverage approach to detect the suspected data points. The outlier detection demonstrated the statistical validity of the developed correlations. William's plot of three generated correlations showed that all of the data points are located in the valid zone except one point for PBS polymer and three points for PS polymer.

Supercritical CO2-induced anti-nanoconfinement effect to obtain novel 2D structures

Space confined reactions have emerged as a viable strategy for achieving important and fascinating properties in functional materials. Various scaffolds have been reported so far for confinement and it gives rise to the phenomenon of nanoconfinement, where the energetics and kinetics of catalytic reactions can be modulated upon confining the catalysts in a particular site. Although various systems have been reported so far for confinement, emphasis has been placed on the concept of space confinement, and the changes in the confined space itself are neglected. Strikingly, this critical issue would be touched on and revealed by supercritical CO₂ (SC CO₂) that is used in confined geometries. Herein, we define the structural changes of confined spaces induced by SC CO₂ as an anti-nanoconfinement effect, which can bring about a series of variations together with electronic band and structural transformation. Moreover, progress in the design and applications of the anti-nanoconfinement effect is traced, and there is a discussion of emerging issues that have yet to be explored to achieve a future direction to develop more novel two-dimensional (2D) structures.

Peroxidative Oxidation of Cyclohexane Using 3d Metal Complexes with Hydrazone-Derived Ligands as Catalysts: Exploring (Un)Conventional Conditions

Two tetranuclear and two mononuclear Cu(II) complexes with arylhydrazones of malononitrile derived ligands (compounds 1–2 and 3–4, respectively), one trinuclear Co(II/III) complex with an arylhydrazone of acetoacetanilide (5) and one tetranuclear Zn(II) complex of 3-(2-carboxyphenyl-hydrazone)pentane-2,4-dione (6) were screened as potential catalysts in the peroxidative oxidation of cyclohexane by aqueous H2O2 in acetonitrile. The best results were attained in the presence of pyrazine-2-carboxylic acid (PCA) with 1 (26% yield, TON = 52.0) and with 2 (24%, TON = 48.0) after 4 h at 40 °C. In the presence of complexes 5 and 6, no oxygenated products were detected in the studied conditions. The employment of non-conventional conditions like supercritical carbon dioxide (scCO2) as reaction medium or microwave (MW) irradiation was assessed for complexes 1 and 2. After 6 h in acetonitrile–scCO2, at 50 °C and with HNO3 as promoter, only 17% yield was achieved using 1 as catalyst, and 21% using 2. Total yields of oxygenates up to 14 (with 1) and 13% (2) and TOFs of 56.0 and 52.0 h−1, respectively, were obtained working under MW irradiation at 70 °C and for the much shorter time of 0.5 h.

Rotational spectrum of anisole-CO2: Cooperative C···O tetrel bond and CH···O hydrogen bond

Rotational spectrum of the 1:1 anisole-CO₂ complex has been investigated using a pulsed jet Fourier transform microwave spectrometer supplemented with quantum chemical calculations. In the pulsed jet, only one isomer has been observed which is characterized by a dominant C···O tetrel bond and two CH···O_CO2 weak hydrogen bonds. Different theoretical methods predict different orders of relative energies of plausible conformations. The experimental observation is most consistent with the theoretical estimation at the B3LYP-D3(BJ)/6-311++G(d,p) level of theory. Johnson's non-covalent interaction, quantum theory of atoms in molecules and natural bond orbital analyses have been applied to better understand the nature of non-covalent interactions at play in the anisole-CO₂ complex.

Dispersion of Hydrophilic "Hedgehog" Microparticles in Liquid CO2 Mixtures

Liquid and supercritical CO₂ are nontoxic and nonflammable reaction media with pressure-variable physical properties. These states of CO₂ also have high solubility limits for gas and liquid hydrocarbons, making them good candidates for "green" hydrophobic solvents in sustainable chemical technologies. However, the dispersion of hydrophilic colloidal nanoscale and microscale particles in CO₂ is challenging due to the tendency of polar particles to aggregate in nonpolar media, limiting their available surface area and catalytic efficiencies. Here we show that native hydrophilic semiconductor particles can be effectively dispersed in a liquid CO₂ mixture with acetonitrile (ACN) without additional chemical or mechanical dispersion techniques. Using surface corrugation as a method to prevent aggregation, we find that geometrically complex particles with a halo of stiff nanoscale spikes disperse and remain suspended longer in liquid CO₂ than those without or with less prominent nanoscale corrugation. For the particles of this size and liquid CO₂ mixtures, individual particle mass remains a prominent factor determining particle sedimentation rate even in the absence of aggregation. Particle dispersion and structural stability are confirmed using a combination of UV-vis spectroscopy, finite-difference time-domain modeling, and electron microscopy. The necessity of the cosolvent (ACN) indicates that particle behavior in liquid CO₂ is vastly different than in traditional liquid-phase solvents and highlights the need for future studies to understand the wetting behavior of hydrophilic particles in high-pressure nonpolar environments.

Interaction Types in C6H5(CH2)nOH-CO2 (n = 0-4) Determined by the Length of the Side Alkyl Chain

C₆H₅(CH₂)_nOH-CO₂ complexes have been investigated using rotational spectroscopy (n = 0-2) complemented by quantum chemical calculations (n = 0-4), which implies that the side alkyl chain length can determine the types of intermolecular interactions. Unlike the in-plane C···O tetrel bond in phenol-CO₂, the π*_CO2···π_aromatic interaction has been shown to link CO₂ to phenylmethanol and 2-phenylethanol, which is, to the best of our knowledge, the first time it has been demonstrated by rotational spectroscopy. Further elongations of the side alkyl chain gradually increase the energies of intramolecular hydrogen bonds in 3-phenylpropanol and 4-phenylbutanol so that CO₂ cannot break it. CO₂ will be pushed farther from the monomers and link with the -OH group through a dominating C···O tetrel bond. Our observations would allow, with the choice of the proper length of the side alkyl chain, new strategies for engineering C···π_aromatic-centered noncovalent bonding schemes for the capture, utilization, and storage of CO₂.

A Bibliometric Analysis and Review of Supercritical Fluids for the Synthesis of Nanomaterials

Since the 1990s, supercritical fluids for the synthesis of nanomaterials have been paid more and more attention by researchers and have gradually become one of the most important ways to prepare nanomaterials. In this study, literature data on "supercritical fluids for the synthesis of nanomaterials" from 1998 to 2020 were obtained from the Web of Science database, and the data were processed and analyzed by the bibliometric method combined with Microsoft office 2019, Origin 2018, VOSviewer, and other software, so as to obtain the research status and development trend of "supercritical fluids for the synthesis of nanomaterials". The results show that since literature on "supercritical fluids for the synthesis of nanomaterials" appeared for the first time in 1998, the number of articles published every year has risen. In terms of this field, China has become the second-largest publishing country after the United States, and China and the United States display a lot of cooperation and exchanges in this field. "Supercritical CO2", "supercritical water", "supercritical antisolvent", "surface modification", and so on have become the research hotspots of "supercritical fluids for the synthesis of nanomaterials".

Green approach for fabrication of bacterial cellulose-chitosan composites in the solutions of carbonic acid under high pressure CO2

The functionalization of the bacterial cellulose (BC) surface with a chitosan biopolymer to expand the areas of possible applications of the modified BC is an important scientific task. The creation of such composites in the carbonic acid solutions that were performed in this work has several advantages in terms of being biocompatible and eco-friendly. Quantitative analysis of chitosan content in the composite was conducted by tritium-labeled chitosan radioactivity detection method and this showed three times increased chitosan loading. Different physicochemical methods showed successful incorporation of chitosan into the BC matrix and interaction with it through hydrogen bonds. Microscopy results showed that the chitosan coating with a thickness of around 10 nm was formed in the bulk of BC, covering each microfibril. It was found that the inner specific surface area increased 1.5 times on deposition of chitosan from the solutions in carbonic acid.

A facile, fast, and low-cost method for fabrication of micro/nano-textured superhydrophobic surfaces

HYPOTHESIS

Alkyl ketene dimer (AKD) is frequently used in paper industry as an inexpensive sizing agent. The formation of a porous structure after curing the solidified AKD for an extra-long time (4-6 days) results in superhydrophobicity. In this study, a facile and low-cost method was utilized to turn the surface of AKD superhydrophobic in a very short period of time.

EXPERIMENTS

We fabricated superhydrophobic coatings by dipping glass and paper substrates in molten AKD and then treating them with ethanol after solidification. The samples were characterized by X-ray diffraction, Scanning electron microscopy, Fourier transform-infrared spectroscopy, X-ray photoelectron spectroscopy, Confocal laser scanning microscopy, and dynamic contact angle goniometry.

FINDINGS

The results show that briefly treating the coatings, obtained from isothermally heated AKD melt at 40 °C for 3 min, with ethanol leads to superhydrophobicity with advancing and receding contact angles of 158.7 ± 1.4° and 156.8 ± 0.9°, respectively. By increasing the melt temperature to 70 °C and its heating time to 6 h followed by ethanol treatment, the advancing and receding contact angles increased to 163.7 ± 1.3° and 162.6 ± 1.2°, respectively. This enhancement in superhydrophobicity is due to the formation of porous, entangled irregular micro/nano textures that create air cushions on the surface resulting in droplet state transition from Wenzel to Cassie.

Efficient transformation of CO2 into quinazoline-2,4(1H,3H)-diones at room temperature catalyzed by a ZnI2/NEt3 system

The readily available ZnI₂/NEt₃ system promotes the efficient transformation of CO₂ and 2-aminobenzonitriles into quinazoline-2,4(1H,3H)-diones at room temperature and low CO₂ pressure.

Chemistry in supercritical fluids for the synthesis of metal nanomaterials

The supercritical flow synthesis of metal nanomaterials is sustainable and scalable for the efficient production of materials.

Extraction of Astaxanthin and Lutein from Microalga Haematococcus pluvialis in the Red Phase Using CO₂ Supercritical Fluid Extraction Technology with Ethanol as Co-Solvent

Astaxanthin and lutein, antioxidants used in nutraceutics and cosmetics, can be extracted from several microalgal species. In this work, investigations on astaxanthin and lutein extraction from Haematococcus pluvialis (H. pluvialis) in the red phase were carried out by means of the supercritical fluid extraction (SFE) technique, in which CO₂ supercritical fluid was used as the extracting solvent with ethanol as the co-solvent. The experimental activity was performed using a bench-scale reactor in semi-batch configuration with varying extraction times (20, 40, 60, and 80 min), temperatures (50, 65, and 80 °C) and pressures (100, 400, and 550 bar). Moreover, the performance of CO₂ SFE with ethanol was compared to that without ethanol. The results show that the highest astaxanthin and lutein recoveries were found at 65 °C and 550 bar, with ~18.5 mg/g dry weight (~92%) astaxanthin and ~7.15 mg/g dry weight (~93%) lutein. The highest astaxanthin purity and the highest lutein purity were found at 80 °C and 400 bar, and at 65 °C and 550 bar, respectively.

Synthesis of graphene/epoxy resin composite via 1,8-diaminooctane by ultrasonication approach for corrosion protection

In this work, the preparation of the graphene/epoxy resin composite and its corrosion protection on the copper substrate were presented. The 1,8-diaminooctane-grafted-graphene (1,8-D-g-G) was synthesized using the carboxyl functional graphite and 1,8-diaminooctane by a one-pot process under ultrasonication in supercritical CO₂. The structure and morphology of the as-prepared samples characterized by FTIR, XPS, TEM, AFM, and SEM confirmed that the graphite was exfoliated into the graphene and the latter reacted with the 1,8-diaminooctane via amidation to form the 1,8-D-g-G. The graphene/epoxy resin composite was readily achieved by the reaction of the epoxy resin with the 1,8-D-g-G. The electrochemical and salt spray tests were applied to assess the corrosion protection of the composite coating on the copper substrate. The results demonstrated that the composite exhibited excellent corrosion protection. Also, the mechanism of the co-occurred exfoliating process and the amidation reaction in one-pot under ultrasonication in supercritical CO₂ was explored.

An Efficient, Eco-friendly and Sustainable One-Pot Synthesis of 3,4-Dihydropyrimidin-2(1H)-ones Directly from Alcohols Catalyzed by Heteropolyanion-Based Ionic Liquids

Efficient, eco-friendly and sustainable access to 3,4-dihydropyrimidin-2(1H)-ones directly from alcohols under microwave and solvent-free conditions has been reported. The practical protocol involves heteropolyanion-based catalyzed oxidation of alcohols to aldehydes with NaNO₃ as the oxidant followed by cyclocondensation with dicarbonyl compounds and urea or thiourea in a two-step, one-pot manner. Compatibility with different functional groups, good to excellent yields and reusable catalysts are the main highlights. The utilization of alcohols instead of aldehydes is a valid and green alternative to the classical Biginelli reaction.

The Hitchhiker's Guide to Flow Chemistry ∥

Flow chemistry involves the use of channels or tubing to conduct a reaction in a continuous stream rather than in a flask. Flow equipment provides chemists with unique control over reaction parameters enhancing reactivity or in some cases enabling new reactions. This relatively young technology has received a remarkable amount of attention in the past decade with many reports on what can be done in flow. Until recently, however, the question, "Should we do this in flow?" has merely been an afterthought. This review introduces readers to the basic principles and fundamentals of flow chemistry and critically discusses recent flow chemistry accounts.

Highly efficient green synthesis of α-hydroxyphosphonates using a recyclable choline hydroxide catalyst

Aldehydic carbonyl groups are eco-friendly and efficiently hydrophosphonylated by diethylphosphite using the basic ionic liquid, choline hydroxide.

Rotational Spectrum, Structure, and Interaction Energy of the Trifluoroethylene···Carbon Dioxide Complex

Rotational spectra for four isotopologues of the 1:1 weakly bound complex between trifluoroethylene (HFC═CF₂) and carbon dioxide (CO₂) were recorded using 480 MHz bandwidth chirped-pulse and resonant cavity Fourier transform microwave spectroscopy between 5.0 and 18.5 GHz. Two planar forms are possible: experimental rotational constants, planar moments, and dipole moment components are consistent with the form in which CO₂ is positioned at the CHF end of the TFE subunit and is approximately perpendicular to the C═C bond; the other form, with CO₂ aligned roughly parallel to the C═C bond, is not observed, consistent with ab initio relative energy predictions. Symmetry-adapted perturbation theory (SAPT) calculations provided interaction energies for possible structural forms of this complex, and comparisons are made with this and other members of the series of carbon dioxide complexes with fluorinated ethylenes (vinyl fluoride, 1,1-difluoroethylene, cis- and trans-1,2-difluoroethylene, and trifluoroethylene).

Green synthesis of biocompatiable chitosan-graphene oxide hybrid nanosheet by ultrasonication method

Ultrasound-induced synthesis of chitosan-modified nano-scale graphene oxide (CS-NGO) hybrid nanosheets, which has great potential pharmaceutical applications, in supercritical CO2 without catalyst was presented for the first time. The preparation process does not require organic solvent and post-processing, and CO2 easily escapes from the product. The morphology and structure of the CS-NGO, characterized using scanning electron microscopy, transmission electron microscopy, infrared spectroscopy, X-ray photoelectron spectroscopy and thermogravimetric analysis, confirms that it was combined via the amide linkage, and had excellent dispersibility and stability toward acidic and physiological aqueous solution, which implies that it could be used as a drug-carrier. The sonication power played a crucial role in inducing forming amidation, and the conversion rate increased with the sonication time. The mechanism of this reaction was explained.