Magnetic nanoparticles for the manipulation of proteins and cells

Enhanced acoustic streaming effects via sharp-edged 3D microstructures

Acoustofluidic micromanipulation is an important tool for biomedical research, where acoustic forces offer the ability to manipulate fluids, cells, and particles in a rapid, biocompatible, and contact-free manner. Of particular interest is the investigation of acoustically driven sharp edges, where high tip velocity magnitudes and strong acoustic potential gradients drive rapid motion. Whereas prior devices utilizing 2D sharp edges have demonstrated promise for micromanipulation activities, taking advantage of 3D structures has the potential to increase their performance and the range of manipulation activities. In this work, we investigate high-magnitude acoustic streaming fields in the vicinity of sharp-edged, sub-wavelength 3D microstructures. We numerically model and experimentally demonstrate this in fabricating parametrically configured 3D microstructures whose tip-angle and geometry influence acoustic streaming velocities and the complexity of streaming vortices, finding that the simulated and realized velocities and streaming patterns are both tunable and a function of microstructure shape. These sharp-edge interfaces hold promise for biomedical studies benefiting from precise and targeted micromanipulation.

Directional Manipulation of Drops and Solids on a Magneto-Responsive Slippery Surface

The cloaking of the droplet and solid spheres by a thin ferrofluid layer forms a ferrofluid-wetting ridge, enabling the magnet-assisted directional manipulation of droplets and solid spheres on the magneto-responsive slippery surface. Understanding the interplay of various forces governing motion unravels the manipulation mechanism. The transportation characteristics of droplets and solid spheres on such surfaces enable their controlled manipulation in multiple applications. Here, we prepare magneto-responsive slippery surfaces by using superhydrophobic coatings on glass slides, creating a porous network and impregnating them with ferrofluid. Using a permanent magnet (and its translation) in the proximity of these surfaces, we manipulate the motion of liquid drops and solid spheres. Upon dispensing the droplet on the magneto-responsive slippery surface, the droplet is cloaked by a thin ferrofluid layer and forms a ferrofluid wetting ridge. Incorporating the magnetic field creates a magnetic-nanoparticle-rich zone surrounding the ferrofluid ridge. Thereafter, the motion of the magnet gives rise to the movement of the droplet. We found that the interplay of the magnetic force and viscous drag leads to the magnetic manipulation of droplets in a controlled fashion up to a certain magnet speed. Increasing the magnet speed further results in the uncontrolled motion of the droplet, where the droplet cannot follow the magnet trajectory. Moreover, we delineate multifunctional droplet manipulations, such as trapping, pendant droplet manipulation, coalescence, and microchemical reactions, which have wide engineering applications.

Geldanaycin-encapsulated magnetic nanoparticle for isolation of myosin in proteomics

The grafting of a drug molecule, i.e., geldanamycin (GA) onto polyethyleneimine (PEI)-coated magnetic nanoparticle produces a novel composite, GA@Fe3O4-NH2. The composite is confirmed by characterizations with FT-IR, Raman, SEM, EDS, VSM and TEM. Due to the high binding-affinity of GA with myosin heavy chain (MYH), GA@Fe3O4-NH2 exhibits excellent adsorption performance towards myosin. Consequently, a solid-phase extraction procedure is established for highly efficient and selective separation of myosin from pig heart extract. At pH 6.0, an adsorption efficiency of 97.1 % is achieved for treating 100 μg mL-1 myosin (0.1 mL) with 0.1 mg GA@Fe3O4-NH2 as adsorbent. The adsorption behavior of myosin onto GA@Fe3O4-NH2 fits Langmuir model, corresponding to a theoretical adsorption capacity of 518.1 mg g-1. The adsorbed myosin can be readily recycled by the SDS solution (1 %, m/m) with an elution efficiency of 91.8 %. According to circular dichroism spectroscopy, the conformational changes of myosin during adsorption and elution are reversible. For practical application, myosin is successfully isolated from the pig left ventricular protein extract with GA@Fe3O4-NH2, and SDS-PAGE and LC-MS/MS showed that myosin had high purity and a total of 716 proteins could be identified. Significantly, Geldamycin-encapsulated magnetic nanoparticle for the separation of myosin well exploits the potential of the nanomaterials modified by drug molecules in the separation and purification of target proteins.

Selective and Controlled Release Responsive Nanoparticles with Adsorption-Pairing Synergy for Anthocyanin Extraction

Anthocyanins with different structures have different anti-inflammatory and anti-cancer properties. Precise structural use can improve the chemopreventive effects of anthocyanins and enhance treatment outcomes because the anthocyanin structure influences its functional sites and activities. However, owing to the available variety of anthocyanins and their complex structures, the low matching of intermolecular forces between existing adsorbents and anthocyanins limits the targeted separation of anthocyanin monomers. Short-range and efficient selective binding, which is difficult to achieve, is the current focus in the extraction field. We here developed self-assembled Fe3O4-based nano adsorbers with different surface modifications based on adsorption-pairing synergy. The electrostatic force, coordination bond, hydrogen bond, and π-π* bond together induced selective adsorption between Fe3O4 nanoparticles and anthocyanin molecules. An acid-release solution disrupted the polarity balance in the aforementioned association system, thereby promoting the controlled release of anthocyanins. Among the candidates, the effects of morphology, particle size, surface charge, and functional group on adsorption performance were analyzed. The polyacrylamide-modified magnetic Fe3O4 nanoparticles were found to be favorable for selectively extracting anthocyanin, with an adsorption capacity of 19.74 ± 0.07 mg g-1. The release percentage of cyanidin-3-O-glucoside reached up to 98.6% ± 1.4%. This study offers a scientific basis for developing feasible nanotechniques to extract anthocyanins and plant active substances.

Photothermal optical coherence tomography for 3D live cell detection and mapping

Imaging cells in their 3D environment with molecular specificity is important to cell biology study. Widely used microscopy techniques, such as confocal microscopy, have limited imaging depth when probing cells in optically scattering media. Optical coherence tomography (OCT) can provide millimeter-level depth for imaging of highly scattering media but lacks the contrast to distinguish cells from extracellular matrix or to distinguish between different types of cells. Photothermal OCT (PT-OCT) is a promising technique to obtain molecular contrast at the imaging scale of OCT. Here, we report PT-OCT imaging of live, nanoparticle-labeled cells in 3D. In particular, we demonstrate detection and mapping of single cell in 3D without causing call death, and show the feasibility of 3D cell mapping through optical scattering media. This work presents live cell detection and mapping at an imaging scale that complements the major microscopy techniques, which is potentially useful to study cells in their 3D native or culture environment.

Mill Scale-Derived Magnetite Nanoparticles: A Novel Substrate for Lactate Oxidase-Based Biosensors

Recycling and revalorization of waste are currently essential for sustainable growth. Mill scale, a waste product from steel production industries, which contains high levels of iron and minimal impurities, is proposed in this study as the source to synthesize magnetite nanoparticles (Fe3O4) for an enhancement of a lactate biosensor range. The synthesized Fe3O4 nanoparticles were coated with polydopamine (PDA) to prevent aggregation and degradation, creating a stable platform for immobilizing lactate oxidase enzyme (LOx) on their surfaces. The characterization of the Fe3O4@PDA material was carried out using transmission electron microscopy (TEM), dynamic light scattering (DLS), and measurement of the polydispersity index (PdI). The Fe3O4@PDA-LOx material was then deposited on a screen-printed carbon electrode modified with Prussian blue (SPCE-PB) for lactate detection. The biosensor exhibited a broad, dual linear concentration-response range, one from 0.1 to 4.62 mM with a limit of detection of 0.32 mM and sensitivity of 1.54 μAmM-1cm-2, and another one from 4.62 to 149.21 mM with a limit of detection of 6.31 mM and sensitivity of 0.08 μAmM-1cm-2. The dual-range concentration response of the biosensor makes it an ideal tool for lactate determination in various applications, including sports medicine, clinical diagnosis, and industrial bioprocessing.

Acoustic and Magnetic Stimuli-Based Three-Dimensional Cell Culture Platform for Tissue Engineering

In a conventional two-dimensional (2D) culture method, cells are attached to the bottom of the culture dish and grow into a monolayer. These 2D culture methods are easy to handle, cost-effective, reproducible, and adaptable to growing many different types of cells. However, monolayer 2D cell culture conditions are far from those of natural tissue, indicating the need for a three-dimensional (3D) culture system. Various methods, such as hanging drop, scaffolds, hydrogels, microfluid systems, and bioreactor systems, have been utilized for 3D cell culture. Recently, external physical stimulation-based 3D cell culture platforms, such as acoustic and magnetic forces, were introduced. Acoustic waves can establish acoustic radiation force, which can induce suspended objects to gather in the pressure node region and aggregate to form clusters. Magnetic targeting consists of two components, a magnetically responsive carrier and a magnetic field gradient source. In a magnetic-based 3D cell culture platform, cells are aggregated by changing the magnetic force. Magnetic fields can manipulate cells through two different methods: positive magnetophoresis and negative magnetophoresis. Positive magnetophoresis is a way of imparting magnetic properties to cells by labeling them with magnetic nanoparticles. Negative magnetophoresis is a label-free principle-based method. 3D cell structures, such as spheroids, 3D network structures, and cell sheets, have been successfully fabricated using this acoustic and magnetic stimuli-based 3D cell culture platform. Additionally, fabricated 3D cell structures showed enhanced cell behavior, such as differentiation potential and tissue regeneration. Therefore, physical stimuli-based 3D cell culture platforms could be promising tools for tissue engineering.

The power of super-resolution microscopy in modern biomedical science

Super-resolution microscopy (SRM) technology that breaks the diffraction limit has revolutionized the field of cell biology since its appearance, which enables researchers to visualize cellular structures with nanometric resolution, multiple colors and single-molecule sensitivity. With the flourishing development of hardware and the availability of novel fluorescent probes, the impact of SRM has already gone beyond cell biology and extended to nanomedicine, material science and nanotechnology, and remarkably boosted important breakthroughs in these fields. In this review, we will mainly highlight the power of SRM in modern biomedical science, discussing how these SRM techniques revolutionize the way we understand cell structures, biomaterials assembly and how assembled biomaterials interact with cellular organelles, and finally their promotion to the clinical pre-diagnosis. Moreover, we also provide an outlook on the current technical challenges and future improvement direction of SRM. We hope this review can provide useful information, inspire new ideas and propel the development both from the perspective of SRM techniques and from the perspective of SRM's applications.

Gelatin-Coated Magnetic Nanowires for High-Sensitivity Optical Labels

The encapsulation of magnetic nickel nanowires (NiNWs) with gelatin is proposed as an alternative for optical label detection. Magnetic nanowires can be detected at very low concentrations using light-scattering methods. This detection capacity could be helpful in applications such as transducers for molecular and biomolecular sensors; however, potential applications require the attachment of specific binding molecules to the nanowire structure. In the present study, a method is presented which is helpful in coating magnetic nanowires with gelatin, a material with the potential to handle specific decoration and functionalization of the nanowires; in the first case, silver nanoparticles (AgNPs) are efficiently used to decorate the nanowires. Furthermore, it is shown that the synthesized gelatin-coated particles have excellent detectability to the level of 140 pg/mL; this level of detection outperforms more complex techniques such as ICP-OES (~3 ng/mL for Ni) and magnetoresistance sensing (~10 ng/mL for magnetic nanoparticles).

Cell pairing for biological analysis in microfluidic devices

Cell pairing at the single-cell level usually allows a few cells to contact or seal in a single chamber and provides high-resolution imaging. It is pivotal for biological research, including understanding basic cell functions, creating cancer treatment technologies, developing drugs, and more. Laboratory chips based on microfluidics have been widely used to trap, immobilize, and analyze cells due to their high efficiency, high throughput, and good biocompatibility properties. Cell pairing technology in microfluidic devices provides spatiotemporal research on cellular interactions and a highly controlled approach for cell heterogeneity studies. In the last few decades, many researchers have emphasized cell pairing research based on microfluidics. They designed various microfluidic device structures for different biological applications. Herein, we describe the current physical methods of microfluidic devices to trap cell pairs. We emphatically summarize the practical applications of cell pairing in microfluidic devices, including cell fusion, cell immunity, gap junction intercellular communication, cell co-culture, and other applications. Finally, we review the advances and existing challenges of the presented devices and then discuss the possible development directions to promote medical and biological research.

Role of Iron Oxide (Fe2O3) Nanocomposites in Advanced Biomedical Applications: A State-of-the-Art Review

Nanomaterials have demonstrated a wide range of applications and recently, novel biomedical studies are devoted to improving the functionality and effectivity of traditional and unmodified systems, either drug carriers and common scaffolds for tissue engineering or advanced hydrogels for wound healing purposes. In this regard, metal oxide nanoparticles show great potential as versatile tools in biomedical science. In particular, iron oxide nanoparticles with different shape and sizes hold outstanding physiochemical characteristics, such as high specific area and porous structure that make them idoneous nanomaterials to be used in diverse aspects of medicine and biological systems. Moreover, due to the high thermal stability and mechanical strength of Fe₂O₃, they have been combined with several polymers and employed for various nano-treatments for specific human diseases. This review is focused on summarizing the applications of Fe₂O₃-based nanocomposites in the biomedical field, including nanocarriers for drug delivery, tissue engineering, and wound healing. Additionally, their structure, magnetic properties, biocompatibility, and toxicity will be discussed.

Delivering Mechanical Stimulation to Cells: State of the Art in Materials and Devices Design

Biochemical signals, such as growth factors, cytokines, and transcription factors are known to play a crucial role in regulating a variety of cellular activities as well as maintaining the normal function of different tissues and organs. If the biochemical signals are assumed to be one side of the coin, the other side comprises biophysical cues. There is growing evidence showing that biophysical signals, and in particular mechanical cues, also play an important role in different stages of human life ranging from morphogenesis during embryonic development to maturation and maintenance of tissue and organ function throughout life. In order to investigate how mechanical signals influence cell and tissue function, tremendous efforts have been devoted to fabricating various materials and devices for delivering mechanical stimuli to cells and tissues. Here, an overview of the current state of the art in the design and development of such materials and devices is provided, with a focus on their design principles, and challenges and perspectives for future research directions are highlighted.

Metal-Phenolic Network-Functionalized Magnetic Nanoparticles for Enzyme Immobilization

Metal-phenolic network (MPN) coating is an emerging class of surface functionalization method and has attracted ever-growing interest in areas of bioengineering and biotechnology. Although various applications for MPN coatings, including drug delivery, cytoprotection, and antimicrobial surfaces, have been studied in the form of films and capsules, their interaction with enzyme molecules and the subsequent influence of biocatalytic properties are poorly understood. Herein, MPN coatings composed of different types of metal ions (Cu^II, Fe^III, Zn^II, Mn^II, Au^IV) coordinated with tannic acid (TA) were fabricated on Fe₃O₄ nanoparticles as a facile nanoplatform for immobilizing alcohol dehydrogenase (ADH). The results show that the different polarization capacities of metal ions (i.e., Lewis acids) could affect the hydrophilicity and hydrophobicity of the coordinated MPN coatings, while the enzyme immobilization rate, biocatalytic activity, and stability are in turn influenced by the surface properties of the MPN coatings. Among the different metal ions, the Fe₃O₄-TA-Zn^II showed the highest enzyme immobilizing efficiency (91.53%) and catalytic activity (60.45 U/mg ADH). Besides, the enzyme re-usability and tolerance to extreme conditions were both enhanced after immobilization. These results highlight an advanced strategy for the interfacial construction of hybrid heterogeneous biocatalytic systems with potential use in biomedical applications.

Recent advances in engineering iron oxide nanoparticles for effective magnetic resonance imaging

Iron oxide nanoparticle (IONP) with unique magnetic property and high biocompatibility have been widely used as magnetic resonance imaging (MRI) contrast agent (CA) for long time. However, a review which comprehensively summarizes the recent development of IONP as traditional T₂ CA and its new application for different modality of MRI, such as T₁ imaging, simultaneous T₂/T₁ or MRI/other imaging modality, and as environment responsive CA is rare. This review starts with an investigation of direction on the development of high-performance MRI CA in both T₂ and T₁ modal based on quantum mechanical outer sphere and Solomon–Bloembergen–Morgan (SBM) theory. Recent rational attempts to increase the MRI contrast of IONP by adjusting the key parameters, including magnetization, size, effective radius, inhomogeneity of surrounding generated magnetic field, crystal phase, coordination number of water, electronic relaxation time, and surface modification are summarized. Besides the strategies to improve r₂ or r₁ values, strategies to increase the in vivo contrast efficiency of IONP have been reviewed from three different aspects, those are introducing second imaging modality to increase the imaging accuracy, endowing IONP with environment response capacity to elevate the signal difference between lesion and normal tissue, and optimizing the interface structure to improve the accumulation amount of IONP in lesion. This detailed review provides a deep understanding of recent researches on the development of high-performance IONP based MRI CAs. It is hoped to trigger deep thinking for design of next generation MRI CAs for early and accurate diagnosis.

•

T₂ contrast capacity of iron oxide nanoparticles (IONPs) could be improved based on quantum mechanical outer sphere theory.

•

IONPs could be expand to be used as effective T₁ CAs by improving q value, extending τ_s, and optimizing interface structure.

•

Environment responsive MRI CAs have been developed to improve the diagnosis accuracy.

•

Introducing other imaging contrast moiety into IONPs could increase the contrast efficiency.

•

Optimizing in vivo behavior of IONPs have been proved to enlarge the signal difference between normal tissue and lesion.

Harnessing the Therapeutic Potential of Extracellular Vesicles for Biomedical Applications Using Multifunctional Magnetic Nanomaterials

Extracellular vesicles (e.g., exosomes) carrying various biomolecules (e.g., proteins, lipids, and nucleic acids) have rapidly emerged as promising platforms for many biomedical applications. Despite their enormous potential, their heterogeneity in surfaces and sizes, the high complexity of cargo biomolecules, and the inefficient uptake by recipient cells remain critical barriers for their theranostic applications. To address these critical issues, multifunctional nanomaterials, such as magnetic nanomaterials, with their tunable physical, chemical, and biological properties, may play crucial roles in next-generation extracellular vesicles (EV)-based disease diagnosis, drug delivery, tissue engineering, and regenerative medicine. As such, one aims to provide cutting-edge knowledge pertaining to magnetic nanomaterials-facilitated isolation, detection, and delivery of extracellular vesicles and their associated biomolecules. By engaging the fields of extracellular vesicles and magnetic nanomaterials, it is envisioned that their properties can be effectively combined for optimal outcomes in biomedical applications.

Advantages, Factors, Obstacles, Potential Solutions, and Recent Advances of Fish Germ Cell Transplantation for Aquaculture-A Practical Review

Simple Summary

This review aims to provide practical information and viewpoints regarding fish germ cell transplantation for enhancing its commercial applications. We reviewed and summarized the data from more than 70 important studies and described the advantages, obstacles, recent advances, and future perspectives of fish germ cell transplantation. We concluded and proposed the critical factors for achieving better success and various options for germ cell transplantation with their pros and cons. Additionally, we discussed why this technology has not actively been utilized for commercial purposes, what barriers need to be overcome, and what potential solutions can advance its applications in aquaculture.

Abstract

Germ cell transplantation technology enables surrogate offspring production in fish. This technology has been expected to mitigate reproductive barriers, such as long generation time, limited fecundity, and complex broodstock management, enhancing seed production and productivity in aquaculture. Many studies of germ cell transplantation in various fish species have been reported over a few decades. So far, surrogate offspring production has been achieved in many commercial species. In addition, the knowledge of fish germ cell biology and the related technologies that can enhance transplantation efficiency and productivity has been developed. Nevertheless, the commercial application of this technology still seems to lag behind, indicating that the established models are neither beneficial nor cost-effective enough to attract potential commercial users of this technology. Furthermore, there are existing bottlenecks in practical aspects such as impractical shortening of generation time, shortage of donor cells with limited resources, low efficiency, and unsuccessful surrogate offspring production in some fish species. These obstacles need to be overcome through further technology developments. Thus, we thoroughly reviewed the studies on fish germ cell transplantation reported to date, focusing on the practicality, and proposed potential solutions and future perspectives.

One-pot synthesis of multifunctional radiolabeled upconversion nanorods for enhanced multimodal imaging performance

We report on the synthesis of radiolabeled NaYF4: Yb/Er/Gd(18/2/60mol%) upconversion nanorods (UCNRs) by one-pot solvothermal process. The synthesized UCNRs were transferred to water by using poly(maleic anhydride-alt-1-octadecene)-mPEG 5000 (C18PMH-PEG). Subsequently...

Controllable Engineering and Functionalizing of Nanoparticles for Targeting Specific Proteins towards Biomedical Applications

Nanoparticles have been widely used in important biomedical applications such as imaging, drug delivery, and disease therapy, in which targeting toward specific proteins is often essential. However, current targeting strategies mainly rely on surface modification with bioligands, which not only often fail to provide desired properties but also remain challenging. Here an unprecedented approach is reported, called reverse microemulsion-confined epitope-oriented surface imprinting and cladding (ROSIC), for facile, versatile, and controllable engineering coreless and core/shell nanoparticles with tunable monodispersed size as well as specific targeting capability toward proteins and peptides. Via engineering coreless imprinted and cladded silica nanoparticles, the effectiveness and superiority over conventional imprinting of the proposed approach are first verified. The prepared nanoparticles exhibit both high specificity and high affinity. Using quantum dots, superparamagnetic nanoparticles, silver nanoparticles, and upconverting nanoparticles as a representative set of core substrates, a variety of imprinted and cladded single-core/shell nanoparticles are then successfully prepared. Finally, using imprinted and cladded fluorescent nanoparticles as probes, in vitro targeted imaging of triple-negative breast cancer (TNBC) cells and in vivo targeted imaging of TNBC-bearing mice are achieved. This approach opens a new avenue to engineering of nanoparticles for targeting specific proteins, holding great prospects in biomedical applications.

Photoacoustic and magnetic resonance imaging-based gene and photothermal therapy using mesoporous nanoagents

The integration of photothermal therapy (PTT) with gene therapy (GT) in a single nanoscale platform demonstrates great potential in cancer therapy. Porous iron oxide nanoagents (PIONs) are widely used as magnetic nanoagents in the drug delivery field and also serve as a photothermal nanoagent for photothermal therapy. However, the therapeutic efficacy of PIONs-mediated GT has not been studied. The long noncoding RNA (lncRNA) CRYBG3 (LNC CRYBG3), a lncRNA induced by heavy ion irradiation in lung cancer cells, has been reported to directly bind to globular actin (G-actin) and cause degradation of cytoskeleton and blocking of cytokinesis, thus indicating its potential for use in GT by simulating the effect of heavy ion irradiation and functioning as an antitumor drug. In the present study, we investigated the possibility of combining PIONs-mediated PTT and LNC CRYBG3-mediated GT to destroy non-small cell lung cancer (NSCLC) cells both in vitro and in vivo. The combination therapy showed a high cancer cell killing efficacy, and the cure rate was better than that achieved using PTT or GT alone. Moreover, as a type of magnetic nanoagent, PIONs can be used for magnetic resonance imaging (MRI) and photoacoustic imaging (PAI) both in vitro and in vivo. These findings indicate that the new combination therapy has high potential for cancer treatment.

•

LNC CRYBG3 induced by heavy ion irradiation can cause cytoskeleton degradation and function as an antitumor drug.

•

pcDNA3.1-LNC CRYBG3 delivered by PIONs can escape from lysosomes to facilitate plasmid release when exposed to NIR.

•

The combination of PIONs-mediated PTT and LNC CRYBG3-mediated GT presents both diagnosis and treatment potential.

Preparation of Magnetic Hydrogel Microparticles with Cationic Surfaces and Their Cell-Assembling Performance

Cationic magnetic hydrogel microparticles with high retention on cell surfaces were prepared using a two-step procedure. Using these magnetic hydrogel microparticles, cells were clustered with each other, and cell aggregates were prepared effectively. Cross-linked poly(vinyl alcohol) (PVA) hydrogel microparticles containing iron oxide nanoparticles were prepared. The diameter of the microparticles was in the range of 200-500 nm. Water-soluble cationic polymers containing both trimethyl ammonium (TMA) groups and phenylboronic acid (PBA) groups were synthesized for the surface modification of the microparticles. To regulate the composition, electrically neutral phosphorylcholine groups were introduced into the polymer. Covalent bonds were formed between the hydroxy groups of PVA microparticles and PBA groups in the polymer. The surface zeta potential of the microparticles reflected the composition of the TMA groups. The particles responded to an external magnetic field and clustered rapidly. Microparticles were adsorbed on the floating cell surface and induced cell aggregation quickly when a magnetic field was applied. Under the most effective conditions, the diameter of the cell aggregates increased to approximately 1 mm after 30 min. Denser cell aggregates were formed by the synergistic effects of the magnetic field and the properties of the microparticles. The formed cell aggregates continued to grow for more than 4 days under an applied magnetic field, indicating that the ability of the cells in the aggregate to proliferate was well maintained.

A rapidly magnetically assembled stem cell microtissue with "hamburger" architecture and enhanced vascularization capacity

With the development of magnetic manipulation technology based on magnetic nanoparticles (MNPs), scaffold-free microtissues can be constructed utilizing the magnetic attraction of MNP-labeled cells. The rapid in vitro construction and in vivo vascularization of microtissues with complex hierarchical architectures are of great importance to the viability and function of stem cell microtissues. Endothelial cells are indispensable for the formation of blood vessels and can be used in the prevascularization of engineered tissue constructs. Herein, safe and rapid magnetic labeling of cells was achieved by incubation with MNPs for 1 h, and ultrathick scaffold-free microtissues with different sophisticated architectures were rapidly assembled, layer by layer, in 5 min intervals. The in vivo transplantation results showed that in a stem cell microtissue with trisection architecture, the two separated human umbilical vein endothelial cell (HUVEC) layers would spontaneously extend to the stem cell layers and connect with each other to form a spatial network of functional blood vessels, which anastomosed with the host vasculature. The "hamburger" architecture of stem cell microtissues with separated HUVEC layers could promote vascularization and stem cell survival. This study will contribute to the construction and application of structural and functional tissues or organs in the future.

Magnetic levitation assisted biofabrication, culture, and manipulation of 3D cellular structures using a ring magnet based setup

Diamagnetic levitation is an emerging technology for remote manipulation of cells in cell and tissue level applications. Low-cost magnetic levitation configurations using permanent magnets are commonly composed of a culture chamber physically sandwiched between two block magnets that limit working volume and applicability. This work describes a single ring magnet-based magnetic levitation system to eliminate physical limitations for biofabrication. Developed configuration utilizes sample culture volume for construct size manipulation and long-term maintenance. Furthermore, our configuration enables convenient transfer of liquid or solid phases during the levitation. Before biofabrication, we first calibrated/ the platform for levitation with polymeric beads, considering the single cell density range of viable cells. By taking advantage of magnetic focusing and cellular self-assembly, millimeter-sized 3D structures were formed and maintained in the system allowing easy and on-site intervention in cell culture with an open operational space. We demonstrated that the levitation protocol could be adapted for levitation of various cell types (i.e., stem cell, adipocyte and cancer cell) representing cells of different densities by modifying the paramagnetic ion concentration that could be also reduced by manipulating the density of the medium. This technique allowed the manipulation and merging of separately formed 3D biological units, as well as the hybrid biofabrication with biopolymers. In conclusion, we believe that this platform will serve as an important tool in broad fields such as bottom-up tissue engineering, drug discovery and developmental biology.

Element-specific contributions to improved magnetic heating of theranostic CoFe2O4 nanoparticles decorated with Pd

Decoration with Pd clusters increases the magnetic heating ability of cobalt ferrite (CFO) nanoparticles by a factor of two. The origin of this previous finding is unraveled by element-specific X-ray absorption spectroscopy (XAS) and magnetic circular dichroism (XMCD) combined with atomic multiplet simulations and density functional theory (DFT) calculations. While the comparison of XAS spectra with atomic multiplet simulations show that the inversion degree is not affected by Pd decoration and, thus, can be excluded as a reason for the improved heating performance, XMCD reveals two interrelated responsible sources: significantly larger Fe and Co magnetic moments verify an increased total magnetization which enhances the magnetic heating ability. This is accompanied by a remarkable change in the field-dependent magnetization particularly for Co ions which exhibit an increased low-field susceptibility and a reduced spin canting behavior in higher magnetic fields. Using DFT calculations, these findings are explained by reduced superexchange between ions on octahedral lattice sites via oxygen in close vicinity of Pd, which reinforces the dominating antiparallel superexchange interaction between ions on octahedral and tetrahedral lattice sites and thus reduces spin canting. The influence of the delocalized nature of Pd 4d electrons on the neighboring ions is discussed and the conclusions are illustrated with spin density isosurfaces of the involved ions. The presented results pave the way to design nanohybrids with tailored electronic structure and magnetic properties.

Label-free image-encoded microfluidic cell sorter with a scanning Bessel beam

The microfluidic-based, label-free image-guided cell sorter offers a low-cost, high information content, and disposable solution that overcomes many limitations in conventional cell sorters. However, flow confinement for most microfluidic devices is generally only one-dimensional using sheath flow. As a result, the equilibrium distribution of cells spreads beyond the focal plane of commonly used Gaussian laser excitation beams, resulting in a large number of blurred images that hinder subsequent cell sorting based on cell image features. To address this issue, we present a Bessel-Gaussian beam image-guided cell sorter with an ultra-long depth of focus, enabling focused images of >85% of passing cells. This system features label-free sorting capabilities based on features extracted from the output temporal waveform of a photomultiplier tube (PMT) detector. For the sorting of polystyrene beads, SKNO1 leukemia cells, and Scenedesmus green algae, our results indicate a sorting purity of 97%, 97%, and 98%, respectively, showing that the temporal waveforms from the PMT outputs have strong correlations with cell image features. These correlations are also confirmed by off-line reconstructed cell images from a temporal-spatial transformation algorithm tailored to the scanning Bessel-Gaussian beam.

An Advanced In Situ Magnetic Resonance Imaging and Ultrasonic Theranostics Nanocomposite Platform: Crossing the Blood-Brain Barrier and Improving the Suppression of Glioblastoma Using Iron-Platinum Nanoparticles in Nanobubbles

Glioblastoma (GBM) is one of the deadliest and most invasive brain cancers/gliomas, and there is currently no established way to treat this disease. The treatment of GBM typically involves intracranial surgery followed by chemotherapy. However, the blood-brain barrier (BBB) impedes the delivery of the chemotherapeutic drug, making the treatment challenging. In this study, we embedded a chemotherapeutic drug and other nanomaterials into a nanobubble (NB), utilized active tracking and other guidance mechanisms to guide the nanocomposite to the tumor site, and then used high-intensity focused ultrasound oscillation to burst the nanobubbles, generating a transient cavitation impact on the BBB and allowing the drug to bypass it and reach the brain. FePt enhances the resolution of T2-weighted magnetic resonance imaging images and has magnetic properties that help guide the nanocomposite to the tumor location. FePt nanoparticles were loaded into the hydrophobic core of the NBs along with doxorubicin to form a bubble-based drug delivery system (Dox-FePt@NB). The surface of the NBs is modified with a targeting ligand, transferrin (Dox-FePt@NB-Tf), giving the nanocomposite active tracking abilities. The Dox-FePt@NB-Tf developed in the present study represents a potential breakthrough in GBM treatment through improved drug delivery and biological imaging.

Rapid construction and enhanced vascularization of microtissue using a magnetic control method

Stem cells play critical roles in tissue repair and regeneration. The construction of stem cell-derived microtissue is a promising strategy for transplanting cells into defects to improve tissue regeneration efficiency. However, rapidly constructing larger microtissues and promoting vascularization to ensure the cellular nutrient supply remain major challenges. Here, we have developed a magnetic device to rapidly construct and regulate millimeter-scale microtissues derived from magnetic nanoparticle-labeled cells. When the microtissue was cultured under a specific magnetic field, the shape of the microtissue could be changed. Importantly, cell proliferation was maintained, and angiogenesis was activated in the process of microtissue deformation. We developed a magnetic control method to treat microtissue, and the implanted microtissue showed excellent vascularizationin vivo. In brief, this magnetic control technology provides a promising strategy for vascularized regenerative medicine.

Gd3+ Doped CoFe2O4 Nanoparticles for Targeted Drug Delivery and Magnetic Resonance Imaging

Nanoparticles of CoGdxFe2 − xO4 (x = 0%, 25%, 50%) synthesized via sol–gel auto combustion technique and encapsulated within a polymer (Eudragit E100) shell containing curcumin by single emulsion solvent evaporation technique were formulated in this study. Testing of synthesized nanoparticles was carried out by using different characterization techniques, to investigate composition, crystallinity, size, morphology, surface charge, functional groups and magnetic properties of the samples. The increased hydrophilicity resulted in sustained drug release of 90.6% and 95% for E1(CoGd0.25Fe1.75O4) and E2(CoGd0.50Fe1.5O4), respectively, over a time span of 24 h. The relaxivities of the best-chosen samples were measured by using a 3T magnetic resonance imaging (MRI) machine, and a high r2/r1 ratio of 43.64 and 23.34 for composition E1(CoGd0.25Fe1.75O4) and E2(CoGd0.50Fe1.5O4) suggests their ability to work as a better T2 contrast agent. Thus, these novel synthesized nanostructures cannot only enable MRI diagnosis but also targeted drug delivery.

Synthesis of polymer nanoparticles via electrohydrodynamic emulsification-mediated self-assembly

HYPOTHESIS

Electrospray can rapidly produce fine, organic solvent-in-water emulsions in the absence of surfactant via electrohydrodynamic emulsification (EE), a reverse configuration of traditional electrospray. This paper investigates whether EE can produce high-quality nanocomposites comprised of block co-polymers and organic nanoparticles (NPs) via the interfacial instability (IS) self-assembly method. Surfactant-free approaches may increase encapsulation efficiency and product uniformity, process speed, and ease of downstream product purification.

EXPERIMENTS

All particles were produced using EE-mediated self-assembly (SA) (EE-SA). Particles were produced using poly(lactic-co-glycolic acid) (PLGA) polymers as proof of concept. Then, block copolymer (BCP) micelles were synthesized from polystyrene-block-poly(ethylene oxide) (PS-b-PEO) (PS 9.5 kDa:PEO 18.0 kDa) in the presence and absence of superparamagnetic iron oxide nanoparticles (SPIONs) or quantum dots (QDs). Encapsulant concentration was varied, and the effect of encapsulant NP ligands on final particle size was investigated.

FINDINGS

EE-SA generated both pure polymer NPs and nanocomposites containing SPIONs and QDs. PLGA particles spanned from sub- to super-micron sizes. PS-b-PEO NPs and nanocomposites were highly monodisperse, and more highly loaded than those made via a conventional, surfactant-rich IS process. Free ligands decreased the size of pure BCP particles. Increasing encapsulant levels led to a morphological transition from spherical to worm-like to densely loaded structures.

Microemulsion Synthesis of Superparamagnetic Nanoparticles for Bioapplications

Superparamagnetic nanoparticles have seen increased potential in medical and environmental applications. Their preparation is traditionally made by the coprecipitation method, with limited control over the particle size distribution. Microemulsion methods could be advantageous due to the efficient control of the size, shape, and composition of the nanoparticles obtained. Water-in-oil (W/O) microemulsions consist of aqueous microdomains dispersed in a continuous oil phase, stabilized by surfactant molecules. These work as nanoreactors where the synthesis of the desired nanoparticles takes place through a co-precipitation chemical reaction. In this work, superparamagnetic magnetite nanoparticles with average diameters between 5.4 and 7.2 nm and large monodispersity have been synthesized through precipitation in a W/O microemulsion, with Cetyl Trimethyl Ammonium Bromide (CTAB) as a main surfactant, 1-butanol as a cosurfactant, and with 1-hexanol as the continuous oily phase. The optimization of the corresponding washing protocol has also been established since a strict control is required when using these materials for bioapplications. Their applicability in those has been proved by their encapsulation in liposomes, being tested as signal enhancers for lateral flow immunoassays by using the affinity neutravidin-biotin model system. Due to their magnetic behaviour, they were also tested for magnetic separation. These novel materials have been found to be useful for analytical applications requiring high sensitivity and the removal of interferences.

Suzuki–Miyaura cross coupling reaction: recent advancements in catalysis and organic synthesis

Suzuki–Miyaura cross coupling reaction (SMCR) – A milestone in the synthesis of C–C coupled compounds.

Mass spectrometry imaging and monitoring of in vivo glutathione-triggered cisplatin release from nanoparticles in the kidneys

An increasing number of studies have reported the use of various nanoparticles to encapsulate cisplatin, a frontline chemotherapeutic drug against a broad-spectrum of cancers, for overcoming its inherent drawbacks in clinical applications. Nevertheless, few analytical methods or instruments could provide the precise distribution information on this platinum drug in biological tissues. Herein, we provide the first evidence of applying matrix-assisted laser desorption/ionization mass spectrometry imaging (MALDI-MSI) to assess the spatial distribution of cisplatin released from the cell-penetrating poly(disulfide) (CPD)-modified hollow iron oxide nanoparticles (hFe₃O₄-MPS-CPD) at the kidneys via an in situ glutathione (GSH) responsive mode. The cisplatin released from the nanoparticles triggered by GSH was successfully examined as [Pt(DDTC)₂]⁺ (m/z 491.01) and [Pt(DDTC)₃]⁺ (m/z 639.04) by MALDI-MS after derivatization using diethyldithiocarbamate. The in situ spatial distribution of [Pt(DDTC)₂]⁺ and [Pt(DDTC)₃]⁺ in the kidneys was then mapped using MALDI-MSI. This study presents an optimized analytical approach to evaluate and map the metallodrug in biological tissue samples in an efficient and convenient manner, offering great assistance in investigating the biodistribution of cisplatin delivered by nanoparticles, and sheds light on facilitating the studies of the pharmacokinetics of cisplatin in biomedical research.

Functionalization of biopolymer fibers with magnetic nanoparticles

Hybrid fibers consisting of biopolymers and inorganic nanoparticles are receiving increasing attention due to their unique properties. Commonly, the nanoparticles are chosen for their intrinsic properties such as magnetic, thermal, or electrical conductivity. The biopolymer component of the hybrid fiber is chosen for its mechanical properties and ability to act as a scaffold or matrix for the nanoparticles. While there are many fiber-forming synthetic polymers, there has been a recent interest in replacing these systems with biopolymers due to their sustainability, biocompatibility, nontoxicity, and biodegradability. Fibers made from biopolymers have one additional benefit over synthetic polymers as they make good scaffolds for embedding nanoparticles without the need of any additional bonding agents. In particular, naturally occurring biopolymers such as proteins exhibit a myriad of interactions with nanoparticles, including ionic, H-bonding, covalent, Van der Waals, and electrostatic interactions. The diverse range of interactions between magnetic nanoparticles and biopolymers makes resulting hybrid fibers of particular interest as magnetic-responsive materials. Magnetically responsive hybrid biopolymer fibers have many features, including enhanced thermal stabilities, strong mechanical toughness, and perhaps most interestingly multifunctionality, allowing for a wide range of applications. These applications range from biosensing, filtration, UV shielding, antimicrobial, and medical applications, to name a few. Here, we review established hybrid fibers consisting of biopolymers and nanoparticles with a primary focus on biopolymers doped with magnetic nanoparticles and their various putative applications.

The Interplay between Fe3O4 Superparamagnetic Nanoparticles, Sodium Butyrate, and Folic Acid for Intracellular Transport

Combined treatments which use nanoparticles and drugs could be a synergistic strategy for the treatment of a variety of cancers to overcome drug resistance, low efficacy, and high-dose-induced systemic toxicity. In this study, the effects on human colon adenocarcinoma cells of surface modified Fe₃O₄ magnetic nanoparticles (MNPs) in combination with sodium butyrate (NaBu), added as a free formulation, were examined demonstrating that the co-delivery produced a cytotoxic effect on malignant cells. Two different MNP coatings were investigated: a simple polyethylene glycol (PEG) layer and a mixed folic acid (FA) and PEG layer. Our results demonstrated that MNPs with FA (FA-PEG@MNPs) have a better cellular uptake than the ones without FA (PEG@MNPs), probably due to the presence of folate that acts as an activator of folate receptors (FRs) expression. However, in the presence of NaBu, the difference between the two types of MNPs was reduced. These similar behaviors for both MNPs likely occurred because of the differentiation induced by butyrate that increases the uptake of ferromagnetic nanoparticles. Moreover, we observed a strong decrease of cell viability in a NaBu dose-dependent manner. Taking into account these results, the cooperation of multifunctional MNPs with NaBu, taking into consideration the particular cancer-cell properties, can be a valuable tool for future cancer treatment.

Comprehensive Survey on Nanobiomaterials for Bone Tissue Engineering Applications

One of the most important ideas ever produced by the application of materials science to the medical field is the notion of biomaterials. The nanostructured biomaterials play a crucial role in the development of new treatment strategies including not only the replacement of tissues and organs, but also repair and regeneration. They are designed to interact with damaged or injured tissues to induce regeneration, or as a forest for the production of laboratory tissues, so they must be micro-environmentally sensitive. The existing materials have many limitations, including impaired cell attachment, proliferation, and toxicity. Nanotechnology may open new avenues to bone tissue engineering by forming new assemblies similar in size and shape to the existing hierarchical bone structure. Organic and inorganic nanobiomaterials are increasingly used for bone tissue engineering applications because they may allow to overcome some of the current restrictions entailed by bone regeneration methods. This review covers the applications of different organic and inorganic nanobiomaterials in the field of hard tissue engineering.

Surface engineering of magnetic iron oxide nanoparticles by polymer grafting: synthesis progress and biomedical applications

Magnetic iron oxide nanoparticles (IONPs) have wide applications in magnetic resonance imaging (MRI), biomedicine, drug delivery, hyperthermia therapy, catalysis, magnetic separation, and others. However, these applications are usually limited by irreversible agglomeration of IONPs in aqueous media because of their dipole-dipole interactions, and their poor stability. A protecting polymeric shell provides IONPs with not only enhanced long-term stability, but also the functionality of polymer shells. Therefore, polymer-grafted IONPs have recently attracted much attention of scientists. In this tutorial review, we will present the current strategies for grafting polymers onto the surface of IONPs, basically including "grafting from" and "grafting to" methods. Available functional groups and chemical reactions, which could be employed to bind polymers onto the IONP surface, are comprehensively summarized. Moreover, the applications of polymer-grafted IONPs will be briefly discussed. Finally, future challenges and perspectives in the synthesis and application of polymer-grafted IONPs will also be discussed.

Sperm Cell Driven Microrobots-Emerging Opportunities and Challenges for Biologically Inspired Robotic Design

With the advent of small-scale robotics, several exciting new applications like Targeted Drug Delivery, single cell manipulation and so forth, are being discussed. However, some challenges remain to be overcome before any such technology becomes medically usable; among which propulsion and biocompatibility are the main challenges. Propulsion at micro-scale where the Reynolds number is very low is difficult. To overcome this, nature has developed flagella which have evolved over millions of years to work as a micromotor. Among the microscopic cells that exhibit this mode of propulsion, sperm cells are considered to be fast paced. Here, we give a brief review of the state-of-the-art of Spermbots - a new class of microrobots created by coupling sperm cells to mechanical loads. Spermbots utilize the flagellar movement of the sperm cells for propulsion and as such do not require any toxic fuel in their environment. They are also naturally biocompatible and show considerable speed of motion thereby giving us an option to overcome the two challenges of propulsion and biocompatibility. The coupling mechanisms of physical load to the sperm cells are discussed along with the advantages and challenges associated with the spermbot. A few most promising applications of spermbots are also discussed in detail. A brief discussion of the future outlook of this extremely promising category of microrobots is given at the end.

Water-mediated crystallohydrate-polymer composite as a phase-change electrolyte

With the world's focus on wearable electronics, the scientific community has anticipated the plasticine-like processability of electrolytes and electrodes. A bioinspired composite of polymer and phase-changing salt with the similar bonding structure to that of natural bones is a suitable electrolyte candidate. Here, we report a water-mediated composite electrolyte by simple thermal mixing of crystallohydrate and polymer. The processable phase-change composites have significantly high mechanical strength and high ionic mobility. The wide operating voltage range and high faradic capacity of the composite both contribute to the maximum energy density. The convenient assembly and high thermal-shock resistance of our device are due to the mechanical interlocking and endothermic phase-change effect. As of now, no other non-liquid electrolytes, including those made from ceramics, polymers, or hydrogels, possess all of these features. Our work provides a universal strategy to fabricate various thermally manageable devices via phase-change electrolytes.

Remote Control of Mechanical Forces via Mitochondrial-Targeted Magnetic Nanospinners for Efficient Cancer Treatment

In cells, mechanical forces play a key role in impacting cell behaviors, including adhesion, differentiation, migration, and death. Herein, a 20 nm mitochondria-targeted zinc-doped iron oxide nanocube is designed as a nanospinner to exert mechanical forces under a rotating magnetic field (RMF) at 15 Hz and 40 mT to fight against cancer. The nanospinners can efficiently target the mitochondria of cancer cells. By means of the RMF, the nanocubes assemble in alignment with the external field and produce a localized mechanical force to impair the cancer cells. Both in vitro and in vivo studies show that the nanospinners can damage the cancer cells and reduce the brain tumor growth rate after the application of the RMF. This nanoplatform provides an effective magnetomechanical approach to treat deep-seated tumors in a spatiotemporal fashion.

Preparation and pH Controlled Release of Fe3O4/Anthocyanin Magnetic Biocomposites

Anthocyanins are a class of antioxidants extracted from plants, with a variety of biochemical and pharmacological properties. However, the wide and effective applications of anthocyanins have been limited by their relatively low stability and bioavailability. In order to expand the application of anthocyanins, Fe3O4/anthocyanin magnetic biocomposite was fabricated for the storage and release of anthocyanin in this work. The magnetic biocomposite of Fe3O4 magnetic nanoparticle-loaded anthocyanin was prepared through physical intermolecular adsorption or covalent cross-linking. Scanning electron microscopy (SEM), Dynamic light scattering (DLS), Fourier-transform infrared spectroscopy (FTIR), X-ray diffractometry (XRD) and thermal analysis were used to characterize the biocomposite. In addition, the anthocyanin releasing experiments were performed. The optimized condition for the Fe3O4/anthocyanin magnetic biocomposite preparation was determined to be at 60 °C for 20 h in weak alkaline solution. The smooth surface of biocomposite from SEM suggested that anthocyanin was coated on the surface of the Fe3O4 particles successfully. The average size of the Fe3O4/anthocyanin magnetic biocomposite was about 222 nm. Under acidic conditions, the magnetic biocomposite solids could be repeatable released anthocyanin, with the same chemical structure as the anthocyanin before compounding. Therefore, anthocyanin can be effectively adsorbed and released by this magnetic biocomposite. Overall, this work shows that Fe3O4/anthocyanin magnetic biocomposite has great potential for future applications as a drug storage and delivery nanoplatform that is adaptable to medical, food and sensing.

Flexible Ferrofluids: Design and Applications

Ferrofluids, also known as ferromagnetic particle suspensions, are materials with an excellent magnetic response, which have attracted increasing interest in both industrial production and scientific research areas. Because of their outstanding features, such as rapid magnetic reaction, flexible flowability, as well as tunable optical and thermal properties, ferrofluids have found applications in various fields, including material science, physics, chemistry, biology, medicine, and engineering. Here, a comprehensive, in-depth insight into the diverse applications of ferrofluids from material fabrication, droplet manipulation, and biomedicine to energy and machinery is provided. Design of ferrofluid-related devices, recent developments, as well as present challenges and future prospects are also outlined.

Boronate affinity-based photoactivatable magnetic nanoparticles for the oriented and irreversible conjugation of Fc-fused lectins and antibodies

The utilization of immuno-magnetic nanoparticles (MNPs) for the selective capture, enrichment, and separation of specific glycoproteins from complicated biological samples is appealing for the discovery of disease biomarkers. Herein, MNPs were designed and anchored with abundant boronic acid (BA) and photoreactive alkyl diazirine (Diaz) functional groups to obtain permanently tethered Fc-fused Siglec-2 and antiserum amyloid A (SAA) mAb with the assistance of reversible boronate affinity and UV light activation in an orientation-controlled manner. The Siglec-2-Fc-functionalized MNPs showed excellent stability in fetal bovine serum (FBS) and excellent efficiency in the extraction of cell membrane glycoproteins. The anti-SAA mAb-functionalized MNPs maintained active Ab orientation and preserved antigen recognition capability in biological samples. Thus, the BA-Diaz-based strategy holds promise for the immobilization of glycoproteins, such as antibodies, with the original protein binding activity maintained, which can provide better enrichment for the sensitive detection of target proteins.