Photofunctional triplet excited states of cyclometalated Ir(III) complexes: beyond electroluminescence

Dual-linker Ir-Zr-MOF shows improved porosity to enhance aqueous sulfide photooxidation

The hetero photooxidation of sulfide under aqueous conditions is of great importance in the green synthesis of sulfoxide. This process requires a type of solid photocatalyst with the properties of high porosity and water stability, as well as photosensitivity. Herein, a stable Ir-Zr-MOF material (compound 1) with high porosity is assembled from two linear linkers of a 2-phenylquinoline-4-carboxylic acid-Ir(III) complex (Irphen) and 4,4'-stilbenedicarboxylic acid (H2SDC), and a Zr6 cluster. 1 is isostructural to JLU-Liu34 with a composition of [Zr6O4.78(OH)3.22(SDC)3.82(Irphen)0.78TFA2.8]·2.8MeOH and permanent porosity with a BET surface area of 1507 m2 g-1. 1 exhibits improved activity for the photocatalytic aerobic oxidation of sulfide to sulfoxide via blue light irradiation under aqueous conditions. Mechanism studies demonstrate that a superoxide radical is the reactive oxygen species in the sulfide photooxidation. 1 can be readily recycled and reused at least 5 times without loss of catalytic activity. This work not only provides a good strategy for the assembly of an Ir(III) complex into MOFs but also an efficient method for the green synthesis of sulfoxide.

Photoluminescent and Electrochemiluminescent Detection of Fe3+ Using Cyclometalated Iridium Complexes via Fe3+-Catalyzed Hydrolysis

Ferric ion (Fe3+) is a biologically abundant and important metal ion. We developed several cyclometalated iridium complex-based molecular sensors (1, ppy-1, 1-phen, 1 a, and 1_OMe) for the detection of Fe3+ using an acetal moiety as the reaction site. The acetal moiety in iridium complexes undergoes Fe3+-catalyzed hydrolysis and subsequent formation of a formyl group, resulting in turn-off photoluminescent and electrochemiluminescent responses. Sensor 1 showed excellent selectivity toward Fe3+ over other biologically important metal ions. Furthermore, we compared the performance of the sensors based on the structural differences of the iridium complexes, and revealed a relationship between the structure and chemical properties through electrochemical experiments and computational calculations.

Lanthanide-Sensitized Upconversion Iridium Complex via Triplet Energy Transfer

Cyclometalated iridium (Ir) complexes demonstrate impressive capabilities across a range of fields, including biology and photocatalysis, due to their tunable optical characteristics and structure flexibility. However, generating upconversion luminescence of Ir complexes under near-infrared light excitation is challenging. Herein, by employing lanthanide-doped upconversion nanoparticles (UCNPs) as the sensitizer, a new strategy is demonstrated to gain upconversion luminescence of Ir complexes via triplet energy transfer. This design relies on a rationally designed hybrid of core-shell structured NaYbF4:Tb@NaTbF4 UCNPs and new Ir phosphonate complexes, in which UCNPs can migrate upconverted energy to the surface of nanoparticles through Tb3+-mediated energy migration and then sensitize the upconversion luminescence of Ir complexes upon 980 nm excitation. Both experimental and theoretical investigations highlight the significance of triplet energy transfer from excited Tb3+ ions to the triplet state of Ir complexes in the sensitization of upconversion luminescence of Ir complexes. These findings may open exciting avenues for fabricating hybrid Ir materials with new functions and driving the development of UCNP-based nanomaterials.

Self-Assembled Metal Complexes in Biomedical Research

Cisplatin is widely used in clinical cancer treatment; however, its application is often hindered by severe side effects, particularly inherent or acquired resistance of target cells. To address these challenges, an effective strategy is to modify the metal core of the complex and introduce alternative coordination modes or valence states, leading to the development of a series of metal complexes, such as platinum (IV) prodrugs and cyclometalated complexes. Recent advances in nanotechnology have facilitated the development of multifunctional nanomaterials that can selectively deliver drugs to tumor cells, thereby overcoming the pharmacological limitations of metal-based drugs. This review first explores the self-assembly of metal complexes into spherical, linear, and irregular nanoparticles in the context of biomedical applications. The mechanisms underlying the self-assembly of metal complexes into nanoparticles are subsequently analyzed, followed by a discussion of their applications in biomedical fields, including detection, imaging, and antitumor research.

Unexpected XPS Binding Energy Observations Further Highlighted by DFT Calculations of Ruthenocene-Containing [IrIII(ppy)2(RCOCHCORc)] Complexes: Cytotoxicity and Crystal Structure of [Ir(ppy)2(FcCOCHCORc)]

The series of iridium(III) complexes, [Ir(ppy)2(RCOCHCOR')], with R = CH3 and R' = CH3 (1), Rc (2), and Fc (3), as well as R = Rc and R' = Rc (4) or Fc (5), and R = R' = Fc (6), ppy = 2-phenylpyridinyl, Fc = FeII(η5-C5H4)(η5-C5H5), and Rc = RuII(η5-C5H4)(η5-C5H5), has been investigated by single-crystal X-ray crystallography and X-ray photoelectron spectroscopy (XPS) supplemented by DFT calculations. Here, in the range of 3.74 ≤ ΣχR ≤ 4.68, for Ir 4f, Ru 3d and 3p and N 1s orbitals, binding energies unexpectedly decreased with increasing ΣχR (ΣχR = the sum of Gordy group electronegativities of the R groups on β-diketonato ligands = a measure of electron density on atoms), while in Fe 2p orbitals, XPS binding energy, as expected, increased with increasing ΣχR. Which trend direction prevails is a function of main quantum level, n = 1, 2, 3…, sub-quantum level (s, p, d, and f), initial state energies, and final state relaxation energies, and it may differ from compound series to compound series. Relations between DFT-calculated orbital energies and ΣχR followed opposite trend directions than binding energy/ΣχR trends. X-ray-induced decomposition of compounds was observed. The results confirmed good communication between molecular fragments. Lower binding energies of both the Ir 4f7/2 and N 1s photoelectron lines are associated with shorter Ir-N bond lengths. Cytotoxic tests showed that 1 (IC50 = 25.1 μM) and 3 (IC50 = 37.8 μM) are less cytotoxic against HeLa cells than cisplatin (IC50 = 1.1 μM), but more cytotoxic than the free β-diketone FcCOCH2COCH3 (IC50 = 66.6 μM).

Origin of Intersystem Crossing in Red-Light Absorbing Bodipy Derivatives: Time-Resolved Transient Optical and Electron Paramagnetic Resonance Spectral Studies with Twisted and Planar Compounds

We studied the intersystem crossing (ISC) property of red-light absorbing heavy atom-free dihydronaphtho[b]-fused Bodipy derivatives (with phenyl group attached at the lower rim via ethylene bridge, taking constrained geometry, i.e., BDP-1 and the half-oxidized product BDP-2) and dispiroflourene[b]-fused Bodipy (BDP-3) that have a twisted π-conjugated framework. BDP-1 and BDP-3 show strong and sharp absorption bands (i.e., ε = 2.0 × 105 M-1 cm-1 at 639 nm, fwhm ∼491 cm-1 for BDP-3). BDP-1 is significantly twisted (φ = 21.6°), while upon mono-oxidation, BDP-2 becomes nearly planar on the oxidized side (φ = 3.5°). Interestingly, BDP-2 showed efficient ISC (triplet state quantum yield, ΦT = 40%) due to S1/T2 state energy matching. Long-lived triplet excited state was observed (τT = 212 μs in solution and 2.4 ms in polymer matrix), and ISC takes 4.0 ns. Differently, twisted BDP-1 gives weak ISC only 5%, ISC takes 7.7 ns, and the triplet state is populated only with addition of ethyl iodide. Time-resolved electron paramagnetic resonance spectra of BDP-1 revealed the coexistence of two triplet states, with drastically different zero-field splitting D parameters of -2047 MHz and -1370 MHz, respectively, along with varying sublevel population ratios. We demonstrate that the ISC is not necessarily enhanced by torsion of the π-conjugation framework; instead, S1/Tn state energy matching is more efficient to induce ISC even in compounds that have planar molecular structures.

Synthesis of Silver(I) Complexes through In Situ Reactions of dppeda with dmp in the Presence of Silver Halides for Photocatalysis

Due to the unique photosensitivity of silver compounds, they exhibit good photocatalytic activity as photocatalysts in the degradation of water pollutants. However, silver compounds have poor cycling stability and are prone to decomposition and reaction under light to form metallic silver, which greatly limits their practical application. Herein, a (2-(2-(diphenylphosphaneyl)ethyl)-9-methyl-1.10-phenanthroline (PSNNP)) pincer ligand was designed for stabilizing the central metal. The in situ-formed PSNNP ligand could be readily generated in one pot with the participation of silver halides. The reaction of silver halides with dppeda (N,N,N',N'-tetra(diphenylphosphanylmethyl)ethylene diamine) in the presence of dmp (2,9-dimethyl-1,10-phenanthroline) in acetonitrile afforded complexes Ag2X2 (PSNNP)2 (complexes 1, 2) (X = Cl, Br). Single-crystal X-ray diffraction shows that the tridentate coordination of the pincer ligand provides strong binding with metal centers and leads to high stability of the pincer metal unit. The removal rate of rhodamine B (RhB) by complexes 1 and 2 can reach up to 100%, demonstrating an excellent photocatalytic degradation performance for organic dyes. The important effect of PSNNP ligands on photocatalytic properties after coordination with central metals was studied through experiments and discrete Fourier transform (DFT) calculations. The photocatalytic reaction mechanism of complexes 1 and 2 was also studied. This result provides an effective pathway for the first synthesis of PSNNP and interesting insights into photocatalytic degradation chemistry.

Exploring structural and optical properties of a new series of soft salts based on cyclometalated platinum complexes

A series of nine new soft salts based on two platinum(II) complexes, namely ([Pt(C^N)(CN)2]-[Pt(C^N)(en)]+) (en = ethane-1,2-diamine), has been developed and synthesized. Their photophysical properties in both solution and the solid state were described. All soft salt complexes exhibit phosphorescence emission with PLQY in the solid state up to 0.36. Most of these materials displayed aggregation-induced emission (AIE) or aggregation-induced emission enhancement (AIEE) in water/DMSO solutions as the water ratio increased. Structure-property relationships were analyzed in relation to emission properties. The presence of the free nitrogen atoms in soft salt complexes with a C^N pyrimidine-based ligand allowed for reversible sensitivity to acidic vapors, resulting in the quenching of phosphorescence emission. Additionally, for selected soft salts, we described reversible vapochromism behaviour, making these new materials interesting for multi-detection purposes in anti-counterfeiting applications.

Radical enhanced intersystem crossing mechanism, electron spin dynamics of high spin states and their applications in the design of heavy atom-free triplet photosensitizers

Heavy atom-free triplet photosensitizers (PSs) can overcome the high cost and biological toxicity of traditional molecular systems containing heavy atoms (such as Pt(II), Ir(III), Ru(II), Pd(II), Lu(III), I, or Br atoms) and, therefore, are developing rapidly. Connecting a stable free radical to the chromophore can promote the intersystem crossing (ISC) process through electron spin exchange interaction to produce the triplet state of the chromophore or the doublet (D) and quartet (Q) states when taking the whole spin system into account. These molecular systems based on the radical enhanced ISC (REISC) mechanism are important in the field of heavy atom-free triplet PSs. The REISC system has a simple molecular structure and good biocompatibility, and it is especially helpful for building high-spin quantum states (D and Q states) that have the potential to be developed as qubits in quantum information science. This review introduces the molecular structure design for the purpose of high-spin states. Time-resolved electron paramagnetic resonance (TREPR) is the most important characterization method to reveal the properties of these molecular systems, generation mechanism and electron spin polarization (ESP) of the high spin states. The spin polarization manipulation of high spin states and potential application in the field of quantum information engineering are also summarized. Moreover, molecular design principles of the REISC system to obtain long absorption wavelength, high triplet state quantum yield and long triplet state lifetime are introduced, as well as applications of the compounds in triplet-triplet annihilation upconversion, photodynamic therapy and bioimaging. This review is useful for the design of heavy atom-free triplet PSs based on the radical-chromophore molecular structure motif and the study of the photophysics of the compounds, as well as the electron spin dynamics of the multi electron system upon photoexcitation.

Synthesis and Performance of Deep-Red Phosphorescent Iridium Complexes with Pyrone as an Auxiliary Ligand

Two bis-cyclometalated heteroleptic iridium complexes incorporating 1-phenylisoquinoline (piq) as the main cyclometalating ligand and 3-hydroxy-2-methyl-4-pyrone (ma) or 2-ethyl-3-hydroxy-4H-pyran-4-one (ema) as the auxiliary ligand, namely Ir(piq)2(ma) (Ir-1) and Ir(piq)2(ema) (Ir-2), were developed and applied as deep-red phosphors in organic light-emitting diodes (OLEDs). The two auxiliary ligands had similar influences on the photophysical, electrochemical, and electroluminescent properties of the iridium complexes. Ir(piq)2(ma) (Ir-1) showed better luminescence performance in a simple phosphorescent OLED compared to the traditional red iridium complex Ir(piq)2(acac) and exhibited a current efficiency of 9.39 cd A-1 (EQE of 12.09%). In contrast, Ir(piq)2(ema) exhibited an efficiency of 8.6 cd A-1 (EQE of 10.19%).

Template Synthesis of Cyclometalated Macrocycle Iridium(III) Complexes Based on Photoinduced C-N Cross-Coupling Reactions In Situ

The synthesis of metal macrocycle complexes holds paramount importance in coordination and supramolecular chemistry. Toward this end, we report a new, mild, and efficient protocol for the synthesis of cyclometalated macrocycle Ir(III) complexes: [Ir(L1)](PF6) (1), [Ir(L2)](PF6) (2), and [Ir(L3)](PF6) (3), where L1 presents 10,17-dioxa-3,6-diaza-2(2,8),7(8,2)-diquinolina-1,8(1,4)-dibenzenacyclooctadecaphane, L2 is 10,13,16,19,22,25-hexaoxa-3,6-diaza-2(2,8),7(8,2)-diquinolina-1,8(1,4)-dibenzenacyclohexacosaphane, and L3 is 4-methyl-10,13,16,19,22,25-hexaoxa-3,6-diaza-2(2,8),7(8,2)-diquinolina-1,8(1,4)-dibenzenacyclohexacosaphane. This synthesis involves the preassembly of two symmetric 2-phenylquinoline arms into C-shape complexes, followed by cyclization with diamine via in situ interligand C-N cross-coupling, employing a metal ion as a template. Moreover, the synthetic yield of these cyclometalated Ir(III) complexes, tethered by an 18-crown-6 ether-like chain, is significantly enhanced in the presence of K+ ion as a template. The resultant cyclometalated macrocycle Ir(III) complexes exhibit high stability, efficient singlet oxygen generation, and superior catalytic activity for the aerobic selective oxidation of sulfides into sulfoxides under visible light irradiation in aqueous media at room temperature. The photocatalyst 2 demonstrates recyclability and can be reused at least 10 times without a significant loss of catalytic activity. These results unveil a new and complementary approach to the design and in situ synthesis of cyclometalated macrocycle Ir(III) complexes via a mild interligand-coupling strategy.

Chemiluminescence and electrochemiluminescence of water-soluble iridium(III) complexes containing a tetraethylene-glycol functionalised triazolylpyridine ligand

BACKGROUND

Iridium(III) complexes, exhibiting high luminescence quantum yields and a wide range of emission colours, are promising alternatives to tris(2,2'-bipyridine)ruthenium(II) for chemiluminescence (CL) and electrochemiluminescence (ECL) detection. This emerging class of reagent, however, is limited by the poor solubility of many iridium(III) complexes in aqueous solution, and lack of understanding of their remarkably variable selectivities towards different analytes.

RESULTS

Seven [Ir(C^N)2(pt-TEG)]+ complexes, exhibiting a wide range of reduction potentials and emission energies, were examined with six model analytes. For CL, cerium(IV) was used as the oxidant. The alkylamine analytes generally produced greater CL and ECL with the more readily oxidised Ir(III) complexes (C^N = piq, bt, ppy), predominantly through the 'direct' pathway requiring oxidation of both metal complex and analyte. Aniline derivatives that did not also contain secondary or tertiary alkylamines elicited CL from the less readily oxidised complexes (C^N = df-ppy-CF3, df-ppy) via energy transfer. The most difficult to oxidise complexes (C^N = df(CF3)-ppy-Me, df(CN)-ppy) gave poor responses due to the limited potential window of the solvent and inefficiency of energy transfer to their high energy excited states. Greater CL and/or ECL intensities were generally obtained for each analyte with at least one Ir(III) complex than with [Ru(bpy)3]2+; superior limits of detection for two analytes were demonstrated.

SIGNIFICANCE

This exploration of CL/ECL in which the properties of luminophore, analyte and oxidant are all varied provides a new understanding of the influence of the metal-complex potentials and excited state energy on the light-producing and quenching pathways, and consequently, their distinct selectivity towards different analytes. These findings will guide the development of water-soluble Ir(III) complexes as CL and ECL reagents.

Appending Coronene Diimide with Carbon Nanohoops Allows for Rapid Intersystem Crossing in Neat Film

The development of innovative triplet materials plays a significant role in various applications. Although effective tuning of triplet formation by intersystem crossing (ISC) has been well established in solution, the modulation of ISC processes in the solid state remains a challenge due to the presence of other exciton decay channels through intermolecular interactions. The cyclic structure of cycloparaphenylenes (CPPs) offers a unique platform to tune the intermolecular packing, which leads to controllable exciton dynamics in the solid state. Herein, by integrating an electron deficient coronene diimide (CDI) unit into the CPP framework, a donor-acceptor type of conjugated macrocycle (CDI-CPP) featuring intramolecular charge-transfer (CT) interaction was designed and synthesized. Effective intermolecular CT interaction resulting from a slipped herringbone packing was confirmed by X-ray crystallography. Transient spectroscopy studies showed that CDI-CPP undergoes ISC in both solution and the film state, with triplet generation time constants of 4.5 ns and 238 ps, respectively. The rapid triplet formation through ISC in the film state can be ascribed to the cooperation between intra- and intermolecular charge-transfer interactions. Our results highlight that intermolecular CT interaction has a pronounced effect on the ISC process in the solid state, and shed light on the use of the characteristic structure of CPPs to manipulate intermolecular CT interactions.

C-H, N-H, and O-H Bond Activations to Prepare Phosphorescent Hydride-Iridium(III)-Phosphine Emitters with Photocatalytic Achievement in C-C Coupling Reactions

Complex IrH5(PiPr3)2 (1) activates two different σ-bonds of 3-phenoxy-1-phenylisoquinoline, 2-(1H-benzimidazol-2-yl)-6-phenylpyridine, 2-(1H-indol-2-yl)-6-phenylpyridine, 2-(2-hydroxyphenyl)-6-phenylpyridine, N-(2-hydroxyphenyl)-N'-phenylimidazolylidene, and 1,3-di(2-pyridyl)-4,6-dimethylbenzene to give IrH{κ3-C,N,C-[C6H4-isoqui-O-C6H4]}(PiPr3)2 (2), IrH{κ3-N,N,C-[NBzim-py-C6H4]}(PiPr3)2 (3), IrH{κ3-N,N,C-[Ind-py-C6H4]}(PiPr3)2 (4), IrH{κ3-C,N,O-[C6H4-py-C6H4O]}(PiPr3)2 (5), IrH{κ3-C,C,O-[C6H4-Im-C6H4O]}(PiPr3)2 (6), and IrH{κ3-N,C,C-[py-C6HMe2-C5H3N]}(PiPr3)2 (7), respectively. The activations are sequential, with the second generally being the slowest. Accordingly, dihydride intermediates IrH2{κ2-C,N-[C6H4-isoqui-O-C6H5]}(PiPr3)2 (2d), IrH2{κ2-N,N-[NBzim-py-C6H5]}(PiPr3)2 (3d), IrH2{κ2-N,N-[Ind-py-C6H5]}(PiPr3)2 (4d), and IrH2{κ2-N,C-[py-C6HMe2-py]}(PiPr3)2 (7d) were characterized spectroscopically. Complexes 3 and 5 are green phosphorescent emitters upon photoexcitation, exhibiting good absorption over a wide range of wavelengths, emission quantum yields about 0.70 in solution, long enough lifetimes (10-17 μs), and reversible electrochemical behavior. In agreement with these features, complex 3 promotes the photocatalytic α-amino C(sp3)-H arylation of N,N-dimethylaniline and N-phenylpiperidine with 1,4-dicyanobenzene and 4-cyanopyridine under blue LED light irradiation. The C-C coupling products are isolated in high yields with only 2 mol % of photocatalyst after 24 h.

Design, Synthesis, and Characterization of Organometallic BODIPY-Ru(II) Dyads: Redox and Photophysical Properties with Singlet Oxygen Generation Capability†

A series of Ru(II)-acetylide complexes (Ru1, Ru2, and Ru1m) with alkynyl-functionalized borondipyrromethene (BODIPY) conjugates were designed by varying the position of the linker that connects the BODIPY unit to the Ru(II) metal center through acetylide linkage at either the 2-(Ru1) and 2,6-(Ru2) or the meso-phenyl (Ru1m) position of the BODIPY scaffold. The Ru(II) organometallic complexes were characterized by various spectroscopic methods, including nuclear magnetic resonance (NMR) spectroscopy, infrared (IR) spectroscopy, CHN, and high-resolution mass spectrometry (HRMS) analyses. The Ru(II)-BODIPY conjugates exhibit fascinating electrochemical and photophysical properties. All BODIPY-Ru(II) complexes exhibit strong absorption (εmax = 29,000-72,000 M-1 cm-1) in the visible region (λmax = 502-709 nm). Fluorescence is almost quenched for Ru1 and Ru2, whereas Ru1m shows the residual fluorescence of the corresponding BODIPY core at 517 nm. The application of the BODIPY-Ru(II) dyads as nonporphyrin-based triplet photosensitizers was explored by a method involving the singlet oxygen (1O2)-mediated photo-oxidation of diphenylisobenzofuran. Effective π-conjugation between the BODIPY chromophore and Ru(II) center in the case of Ru1 and Ru2 was found to be necessary to improve intersystem crossing (ISC) and hence the 1O2-sensitizing ability. In addition, electrochemical studies indicate electronic interplay between the metal center and the redox-active BODIPY in the BODIPY-Ru(II) dyads.

Red-light operable photosensitizer with symmetry-breaking charge transfer induced intersystem crossing for polymerization of methyl methacrylate

We present a red light-activated zincII bis(dipyrrin) symmetry breaking charge transfer (SBCT) architecture, showing a large molar absorption coefficient (ε = 15.4 × 104 M-1 cm-1), high reactive singlet oxygen generation efficiency (ΦΔ ≈ 0.8) and long-lived triplet state (τT = 150 μs) compared to the donor-acceptor analogue dipyrrin-BF2 complex, highlighting the superiority of the SBCT approach. For the first time, we demonstrated the potential of a SBCT scaffold in red-light-induced methyl methacrylate (MMA) polymerization, using a dual photocatalyst excitation approach.

Visible-Light-Responsive Polyoxometalate@Metal-Organic Frameworks Involving Ir Metalloligands for Highly Selective Photocatalytic Oxidation of Sulfides to Sulfoxide

The synthesis of highly efficient visible-light-responsive photocatalysts is fundamental to solving the problems of low efficiency and poor selectivity in photocatalytic organic synthesis reactions. We synthesized a crystalline polyoxometalate @metal-organic framework material {Zn4 (H2 O)8 [Ir(ppy)2 (dcbpy)]4 [SiW12 O40 ]} ⋅ 4H2 O (Ir-SiW) by self-assembly of Ir metalloligands with POMs. The introduction of Ir metalloligands extends the light absorbing range to visible light, improving the efficient utilization of solar energy. The transfer of photogenerated electrons from Ir metalloligands to SiW12 was observed under visible light irradiation, which boosted the carrier separation efficiency. The synergistic effect of the two components increased the photocatalytic thioether oxidation activity, and the product methyl phenyl sulfoxide for 2.5 h under visible light irradiation (λ >400 nm) reached 99.5 %, which was higher than those of other POM-based photocatalysts. Meanwhile, the yield of methyl phenyl sulfoxide was still higher than 97 % after three cycles, demonstrating the high stability and reusability of Ir-SiW.

Cholesky Decomposition-Based Implementation of Relativistic Two-Component Coupled-Cluster Methods for Medium-Sized Molecules

A Cholesky decomposition (CD)-based implementation of relativistic two-component coupled-cluster (CC) and equation-of-motion CC (EOM-CC) methods using an exact two-component Hamiltonian augmented with atomic-mean-field spin-orbit integrals (the X2CAMF scheme) is reported. The present CD-based implementation of X2CAMF-CC and EOM-CC methods employs atomic-orbital-based algorithms to avoid the construction of two-electron integrals and intermediates involving three and four virtual indices. Our CD-based implementation extends the applicability of X2CAMF-CC and EOM-CC methods to medium-sized molecules with the possibility to correlate around 1000 spinors. Benchmark calculations for uranium-containing small molecules were performed to assess the dependence of the CC results on the Cholesky threshold. A Cholesky threshold of 10-4 is shown to be sufficient to maintain chemical accuracy. Example calculations to illustrate the capability of the CD-based relativistic CC methods are reported for the bond-dissociation energy of the uranium hexafluoride molecule, UF6, with up to quadruple-ζ basis sets, and the lowest excitation energy in the solvated uranyl ion [UO22+(H2O)12].

Spectroscopic Investigation of Coumarin Based Novel Fluorescent TURN OFF Sensor for the Selective Detection of Fe3+: In-vitro Live Cell Imaging Application

The novel TURN-OFF fluorescent sensors 4-(Benzo[1,3]dioxol-5-yloxymethyl)-7-hydroxy-chromen-2-one (4BHC) and 4-(6-Bromo-benzo[1,3]dioxol-5-yloxymethyl)-7-hydroxy-chromen-2-one (4BBHC) are designed and synthesized for the spectrofluorometric detection of the biologically important Fe3+ ions, which has sensitive and selective fluorescence quenching over other competitive metal ions. The effectiveness of the sensors and rapid response are validated through UV-Visible, and fluorescence spectral changes. These spectral changes could be due to the formation of coordination bond between ligand and metal ion. The binding stoichiometry of both sensors with Fe3+ ions is studied with the help of Job's plot, which gives a 1:2 coordination ratio; this is further confirmed through DFT, IR and NMR studies. The association constants of 4BHC and 4BBHC are calculated through Benesie-Hildebrand plots, and they are found to be 6 × 104 M-1 and 11.2 × 104 M-1 respectively. Following, LOD is calculated to define the range of sensitivity of the proposed sensors and is found to be 3.43 μM and 2.14 μM respectively. The chemical hardness parameter suggested that both sensors are soft molecules. In addition, low cytotoxicity levels of 4BHC and 4BBHC led to the demonstration of their efficacy in In-Vitro imaging of Fe3+ ions inside living cells, which ensures that these sensors are promising candidates for bioimaging.

Two Synthetic Tools to Deepen the Understanding of the Influence of Stereochemistry on the Properties of Iridium(III) Heteroleptic Emitters

Two complementary procedures are presented to prepare cis-pyridyl-iridium(III) emitters of the class [3b+3b+3b'] with two orthometalated ligands of the 2-phenylpyridine type (3b) and a third ligand (3b'). They allowed to obtain four emitters of this class and to compare their properties with those of the trans-pyridyl isomers. The finding starts from IrH5(PiPr3)2, which reacts with 2-(p-tolyl)pyridine to give fac-[Ir{κ2-C,N-[C6MeH3-py]}3] with an almost quantitative yield. Stirring the latter in the appropriate amount of a saturated solution of HCl in toluene results in the cis-pyridyl adduct IrCl{κ2-C,N-[C6MeH3-py]}2{κ1-Cl-[Cl-H-py-C6MeH4]} stabilized with p-tolylpyridinium chloride, which can also be transformed into dimer cis-[Ir(μ-OH){κ2-C,N-[C6MeH3-py]}2]2. Adduct IrCl{κ2-C,N-[C6MeH3-py]}2{κ1-Cl-[Cl-H-py-C6MeH4]} directly generates cis-[Ir{κ2-C,N-[C6MeH3-py]}2{κ2-C,N-[C6H4-Isoqui]}] and cis-[Ir{κ2-C,N-[C6MeH3-py]}2{κ2-C,N-[C6H4-py]}] by transmetalation from Li[2-(isoquinolin-1-yl)-C6H4] and Li[py-2-C6H4]. Dimer cis-[Ir(μ-OH){κ2-C,N-[C6MeH3-py]}2]2 is also a useful starting complex when the precursor molecule of 3b' has a fairly acidic hydrogen atom, suitable for removal by hydroxide groups. Thus, its reactions with 2-picolinic acid and acetylacetone (Hacac) lead to cis-Ir{κ2-C,N-[C6MeH3-py]}2{κ2-O,N-[OC(O)-py]} and cis-Ir{κ2-C,N-[C6MeH3-py]}2{κ2-O,O-[acac]}. The stereochemistry of the emitter does not significantly influence the emission wavelengths. On the contrary, its efficiency is highly dependent on and associated with the stability of the isomer. The more stable isomer shows a higher quantum yield and color purity.

An AIE Metal Iridium Complex: Photophysical Properties and Singlet Oxygen Generation Capacity

Photodynamic therapy (PDT) has garnered significant attention in the fields of cancer treatment and drug-resistant bacteria eradication due to its non-invasive nature and spatiotemporal controllability. Iridium complexes have captivated researchers owing to their tunable structure, exceptional optical properties, and substantial Stokes displacement. However, most of these complexes suffer from aggregation-induced quenching, leading to diminished luminous efficiency. In contrast to conventional photosensitizers, photosensitizers exhibiting aggregation-induced luminescence (AIE) properties retain the ability to generate a large number of reactive oxygen species when aggregated. To overcome these limitations, we designed and synthesized a novel iridium complex named Ir-TPA in this study. It incorporates quinoline triphenylamine cyclomethylated ligands that confer AIE characteristics for Ir-TPA. We systematically investigated the photophysical properties, AIE behavior, spectral features, and reactive oxygen generation capacity of Ir-TPA. The results demonstrate that Ir-TPA exhibits excellent optical properties with pronounced AIE phenomenon and robust capability for producing singlet oxygen species. This work not only introduces a new class of metal iridium complex photosensitizer with AIE attributes but also holds promise for achieving remarkable photodynamic therapeutic effects in future cellular experiments and biological studies.

Efficient Spin-Orbit Charge-Transfer Intersystem Crossing and Slow Intramolecular Triplet-Triplet Energy Transfer in Bodipy-Perylenebisimide Compact Dyads and Triads

Bodipy (BDP)-perylenebisimide (PBI) donor-acceptor dyads/triad were prepared to study the spin-orbit charge-transfer intersystem crossing (SOCT-ISC). For BDP-PBI-3, in which BDP was attached at the imide position of PBI, higher singlet oxygen quantum yield (ΦΔ =85 %) was observed than the bay-substituted derivative BDP-PBI-1 (ΦΔ =30 %). Femtosecond transient absorption spectra indicate slow Förster resonance energy transfer (FRET; 40.4 ps) and charge separation (CS; 1.55 ns) in BDP-PBI-3, while for BDP-PBI-1, CS takes 2.8 ps. For triad BDP-PBI-2, ultrafast FRET (149 fs) and CS (4.7 ps) process were observed, the subsequent charge recombination (CR) takes 5.8 ns and long-lived 3 PBI* (179.8 μs) state is populated. Nanosecond transient absorption spectra of BDP-PBI-3 show that the CR gives upper triplet excited state (3 BDP*) and subsequently, via a slow intramolecular triplet energy transfer (14.5 μs), the 3 PBI* state is finally populated, indicating that upper triplet state is involved in SOCT-ISC. Time-resolved electron paramagnetic resonance spectroscopy revealed that both radical pair ISC (RP ISC) and SOCT-ISC contribute to the ISC. A rare electron spin polarization of (e, e, e, e, e, e) was observed for the triplet state formed via the RP ISC mechanism, due to the S-T+1 /T0 states mixing.

Effect of substitution on deep-blue Ir(III) N-heterocyclic carbene (NHC) emitters

The development of Ir(III)-NHC phosphors that display deep-blue luminescence without sacrificing the high photoluminescence quantum yield (PLQY) has become a pivotal area of research. In this respect, two novel deep-blue Ir-NHC emitters (C1 and C2) with strategically designed pro-carbenic imidazolium ligands (L1 and L2) incorporating a heavy bromine atom at the ligand-scaffold were synthesized in good yields (∼80% for L1, L2 and 65% for C1, C2). The ground and excited state properties of the complexes were photophysically determined and the results were found to be in accordance with theoretical calculations at the DFT and TD-DFT levels. Due to the strong σ-donation of the carbene ligands, complexes C1 and C2 displayed oxidation at low anodic potentials. Both the complexes showed deep-blue emission either in solution (λem ∼ 400-425 nm) or as PMMA-doped films of varying concentrations (λem ∼ 400 nm) with an ∼15 times enhanced PLQY with respect to benchmark Ir-NHC complexes. The strategy of incorporating the heavy bromine atom to reduce the molecular vibrations in C1 and C2 was further supported by ∼250 times reduced non-radiative decay constants (knr) and Huang-Rhys constants of C1 and C2 in comparison to those of the benchmark complexes. These facts were also supported by triplet frequency calculations of C1 and C2 to identify the absence of vibrations.

Improved electroluminescence efficiency derived from functionalized decoration of 1,3,4-oxadiazole (OXD)-based Ir(III) complexes

The performance of organic light emitting devices (OLEDs) fabricated using Ir(III) complexes bearing 1,3,4-oxadiazole (OXD)-based cyclometallic ligands still needs to be improved. In this work, Ir3+ was coordinated with a 2-(9,9-diethyl-9H-fluoren-2-yl)-1,3,4-oxadiazole (F-OXD) fragment, which was modified with various functionalized substituents, including fluorenyl, OXD and carbazolyl groups. Three complexes, named Ir-Flu, Ir-OXD and Ir-Cz, were synthesized successfully and their photophysical, electrochemical and electroluminescence properties were investigated in detail. All these complexes exhibited yellow-orange emission in solution and a distinct aggregation-induced phosphorescent emission (AIPE) phenomenon was observed. Monochrome OLEDs were fabricated using these phosphorescent dopants, and the turn-on voltage (V), luminance (L) and current efficiency (CE) showed significant improvement compared to analogous OXD-based Ir(III) complexes reported before. In particular, the device with Ir-OXD as the dopant achieved the highest maximum brightness of 25 014 cd m-2 and the lowest efficiency roll-off (42.6%) at the maximum luminance among all the devices. These results provided a proven strategy of functionalized decoration of OXD-based complexes to achieve superior luminous efficiency devices.

Construction of room temperature phosphorescent materials with ultralong lifetime by in-situ derivation strategy

Although room temperature phosphorescence (RTP) materials have been widely investigated, it is still a great challenge to improve the performance of RTP materials by promoting triplet exciton generation and stabilization. In this study, an in-situ derivation strategy was proposed to construct efficient RTP materials by in-situ deriving guest molecules and forming a rigid matrix during co-pyrolysis of guest molecules and urea. Characterizations and theoretical calculations revealed that the generated derivatives were beneficial for promoting intersystem crossing (ISC) to produce more triplet excitons, while rigid matrix could effectively suppress the non-radiative transition of triplet excitons. Thus, the in-situ derivation strategy was concluded to simultaneously promote the generation and stabilization of triplet excitons. With this method, the ultralong lifetime of RTP materials could reach up to 5.33 s and polychromatic RTP materials were easily achieved. Moreover, the potential applications of the RTP materials in reprocessing or editable anti-counterfeiting were successfully demonstrated.

Iridium(III) polypyridine artificial metalloenzymes with tunable photophysical properties: a new platform for visible light photocatalysis in aqueous solution

Artificial metalloenzymes (ArMs) can combine the unique features of both metal complexes and enzymes by incorporating a cofactor within a protein scaffold. Herein, we describe a panel of ArMs constructed by covalently linking Ir(III) polypyridyl complexes into a prolyl oligopeptidase scaffold. Spectroscopic methods were used to examine how properties of the resulting ArMs are influenced by structural variation of the cyclometalated ligands and the protein scaffold. Visible light photocatalysis by these hybrid catalysts was also examined, leading to the finding that they catalyze inter/intra-molecular [2 + 2] photocycloaddition in aqueous solution. Low but reproducible enantioselectivity was observed using a cofactor that undergoes partial kinetic resolution upon bioconjugation within the ArM active site, showing the importance of scaffold/cofactor interactions for enabling selective ArM photocatalysis. Further evidence of the importance of cofactor/scaffold interactions was provided by analyzing native POP peptidase catalysis by the ArMs. Together, these studies show how Ir(III)-based ArMs constitute a promising starting point for ongoing studies to control the stereoselectivity of EnT reactions by engineering substrate binding/activation motifs in POP.

Multicolor Iridium(III) Complexes with Host-Guest Recognition Motifs for Enhanced Electrochemiluminescence and Modular Labeling

Cyclometalated Ir(III) complexes with high electrochemiluminescence (ECL) efficiency and appropriate bioconjugation sites are urgently needed in ECL immunoassays (ECLIA). Herein, we report the synthesis, photophysics, electrochemistry, and ECL of six new Ir(III) complexes bearing naphthyl (nap) or adamantane phenyl (adap) substitutions, four of which emit cyan, green, or red light and display 1.7- to 7.5-fold increases in ECL intensity. In combination with DFT/TDDFT calculations, this enhancement is rationalized to the augmented radiative rate that arises from both the strengthened spin-orbit coupling (SOC) and the increased transition dipole moment. In addition, the adap-based Ir(III) complex shows high binding affinity with β-cyclodextrin (β-CD) due to the strong hydrophobic interaction, which enables us to develop a modular strategy for the labeling of Ir(III) complexes with biomolecules and to use hydrophobic luminophores in the aqueous-phase detection. As demonstrated, a novel ECLIA is built up and exhibits a wide linear range from 1 ng/mL to 10 μg/mL and a detection limit of 72 pg/mL for the determination of C-reactive protein (CRP). These findings provide new insights into the design, synthesis, and bio-labeling of highly emissive Ir(III) complexes and pave the way for the development of novel ECLIA based on host-guest recognition motifs.

Ligand Design and Preparation, Photophysical Properties, and Device Performance of an Encapsulated-Type Pseudo-Tris(heteroleptic) Iridium(III) Emitter

The organic molecule 2-(1-phenyl-1-(pyridin-2-yl)ethyl)-6-(3-(1-phenyl-1-(pyridin-2-yl)ethyl)phenyl)pyridine (H3L) has been designed, prepared, and employed to synthesize the encapsulated-type pseudo-tris(heteroleptic) iridium(III) derivative Ir(κ6-fac-C,C',C″-fac-N,N',N″-L). Its formation takes place as a result of the coordination of the heterocycles to the iridium center and the ortho-CH bond activation of the phenyl groups. Dimer [Ir(μ-Cl)(η4-COD)]2 is suitable for the preparation of this compound of class [Ir(9h)] (9h = 9-electron donor hexadentate ligand), but Ir(acac)3 is a more appropriate starting material. Reactions were carried out in 1-phenylethanol. In contrast to the latter, 2-ethoxyethanol promotes the metal carbonylation, inhibiting the full coordination of H3L. Complex Ir(κ6-fac-C,C',C″-fac-N,N',N″-L) is a phosphorescent emitter upon photoexcitation, which has been employed to fabricate four yellow emitting devices with 1931 CIE (x:y) ∼ (0.52:0.48) and a maximum wavelength at 576 nm. These devices display luminous efficacies, external quantum efficiencies, and power efficacies at 600 cd m-2, which lie in the ranges 21.4-31.3 cd A-1, 7.8-11.3%, and 10.2-14.1 lm W1-, respectively, depending on the device configuration.

Visible Light Induced C-H/N-H and C-X Bonds Reactions

Herein, we report efficient visible light-induced photoredox reactions of C–H/N–H and C–X Bonds. These methods have provided access to varied portfolio of synthetically important γ-ketoesters, azaspirocyclic cyclohexadienones spirocyclohexadienones, multisubstituted benzimidazole derivatives, substituted N,2-diarylacetamide, 2-arylpyridines and 2-arylquinolines in good yields and under mild conditions. Moreover, we have successfully discussed the construction through visible light-induction by an intermolecular radical addition, dearomative cyclization, aryl migration and desulfonylation. Similarly, we also spotlight the visible light-catalyzed aerobic C–N bond activation from well-known building blocks through cyclization, elimination and aromatization. The potential use of a wide portfolio of simple ketones and available primary amines has made this transformation very attractive.

Development of Wireless Power-Transmission-Based Photodynamic Therapy for the Induction of Cell Death in Cancer Cells by Cyclometalated Iridium(III) Complexes

Photodynamic therapy (PDT), a noninvasive method for cancer therapy, involves the generation of reactive oxygen species (ROS) by the photochemical excitation of photosensitizers (PSs) to induce cell death in cancer cells. A variety of PS including porphyrin derivatives and metal complexes such as iridium (Ir) complexes have been reported. In clinical trials, red-near infrared (NIR) light (650-900 nm) is preferred for the excitation of PSs due to its deeper penetration into tissues compared with visible light (400-500 nm). To overcome this limitation, we established a PDT system that uses cyclometalated iridium(III) (Ir(III)) complexes that are excited with blue light in the wireless power transmission (WPT) system. To achieve this, we developed a light-emitting diode (LED) light device equipped with a receiver coil that receives electricity from the transmitter coil through magnetic resonance coupling. The LEDs in the receiving device use blue light (470 nm) to irradiate a given Ir(III) complex and excite triplet oxygen (³O₂) to singlet oxygen (¹O₂) which induces cell death in HeLa S3 cells (human cervical carcinoma cells). The results obtained in this study suggest that WPT-based PDT represents a potentially new method for the treatment of tumors by a non-battery LED, which are otherwise difficult to treat by previous PDT systems.

Substituent-Dependent Azide Addition to Isocyanides Generates Strongly Luminescent Iridium Complexes

Ligand-centered functionalization reactions offer diverse strategies to prepare luminescent organometallic compounds. These compounds can have unique structures that are not accessible via traditional coordination chemistry and can possess enhanced or unusual photophysical properties. Here we show that bis-cyclometalated iridium bis-isocyanide complexes (1) react with azide (N₃^-) to form novel luminescent structures. The fate of the reaction with azide is determined primarily by the substituent on the aryl isocyanide. Those with electron-withdrawing substituents (CF₃ or NO₂) react with 1 equiv of azide followed by N₂ extrusion, forming aryl cyanamido products (2). With electron-donating groups on the aryl isocyanide the reactivity is more diverse, and three outcomes are possible. In two cases, the isocyanide and azide undergo a [3 + 2] cycloaddition to form a C-bound tetrazolato structure (3). In three other cases, 2 equiv of azide are involved in the formation of a previously unobserved structure, where a tetrazolato and aryl cyanamido couple and rearrange to form a chelating ligand comprised of an N-bound tetrazolato and an acyclic diaminocarbene (4). Finally, a bimetallic aryl cyanamido complex (5) is isolated in one case. All compounds are luminescent, some with exceptional photoluminescence quantum yields as high as 0.81 in solution for sky-blue emission, and 0.87 for yellow emission and 0.65 for orange-red emission in polymer films.

Synthesis, Photophysics and Tunable Reverse Saturable Absorption of Bis-Tridentate Iridium(III) Complexes via Modification on Diimine Ligand

Five novel bis-tridentate Ir(III) complexes (Ir-1−Ir-5) incorporating versatile N^N^C ligands and a N^C^N ligand (1,3-di(2-pyridyl)-4,6-dimethylbenzene) were synthesized. With the combination of experimental and theoretical methods, their steady and transient state characteristics were researched scientifically. The UV-visible absorption spectra show that the broadband charge transfer absorbance of those bis-tridentate Ir(III) complexes can reach 550 nm, all of these complexes reveal the long-lasting phosphorescent emission. Because the excited-state absorption is more powerful than the ground-state absorption, a sturdy reverse saturable absorption (RSA) process can ensue in the visible and near-infrared regions when the complexes are exposed to a 532 nm laser. Therefore, the optical power limiting (OPL) effect follows the trend: Ir-5 > Ir-4 ≈ Ir-3 > Ir-2 > Ir-1. Generally speaking, the expansion of π-conjugation and the introduction of electron donating/withdrawing groups on the N^N^C ligand could effectively elevate the OPL effect. Therefore, these octahedral bis-tridentate Ir(III) complexes might be exploited as potential OPL materials.

Switching the Photoreactions of Ir(III) Diamine Complexes between C-N Coupling and Dehydrogenation under Visible Light Irradiation

The selective photoreactions under mild conditions play an important role in synthetic chemistry. Herein, efficient and mild protocols for switching the photoreactions of Ir(III)-diamine complexes between the interligand C-N coupling and dehydrogenation are developed in the presence of O₂ in EtOH solution. The photoreactions of achiral diamine complexes rac-[Ir(L)₂(dm)](PF₆) (L is 2-phenylquinoline or 2-(2,4-difluorophenyl)quinoline, dm is 1,2-ethylenediamine, 1,2-diaminopropane, 2-methyl-1,2-diamino-propane, or N,N'-dimethyl-1,2-ethylenediamine) are competitive in the oxidative C-N coupling and dehydrogenation at room temperature, which can be switched into the interligand C-N coupling reaction at 60 °C, affording hexadentate complexes in good to excellent yields, or the dehydrogenative reaction in the presence of a catalytic amount of TEMPO as an additive, affording imine complexes. Mechanism studies reveal that ¹O₂ is the major reactive oxygen species, and metal aminyl is the key intermediate in the formation of the oxidative C-N coupling and imine products in the photoreaction processes. These will provide a new and practical protocol for the synthesis of multidentate and imine ligands in situ via the postcoordinated strategy under mild conditions.

Unraveling the Efficiency of Thioxanthone Based Triplet Sensitizers: A Detailed Theoretical Study

Photochemical activation by triplet photosensitizers is highly expedient for a green focus society. In this work, we have theoretically probed excited state characteristics of thioxanthone and its derivatives for their triplet harvesting efficiency using density functional theory (DFT) and time-dependent density functional theory (TDDFT). Absorption and triplet energies corroborate well with the available experimental data. Our results predict that both the S₁ and T₁ states are π-π^* in nature, which renders a high oscillator strength for S₀ to S₁ transition. Major triplet exciton conversion occurs through intersystem crossing (ISC) channel between the S₁ (¹ π-π^* ) and high energy ³ n- π^* state. Apart from that, there is both radiative and non-radiative channel from S₁ to S₀ , which competes with the ISC channel and reduces the triplet harvesting efficiency. For thioxanthones with -OMe (Me=Methyl) or -F substitution at 2 or 2' positions, the ISC channel is not energetically feasible, causing sluggish intersystem crossing quantum yield (Φ_ISC ). For unsubstituted thioxanthone and for isopropyl substitution at 2' position, the S₁ -T₁ gap is slightly positive ( Δ E S 1 - 3 n π * ${\Delta {E}_{{S}_{1}-{}^{3}n{\rm \pi }{\rm {^\ast}}}}$ ), rendering a lower triplet harvesting efficiency. For systems with -OMe or -F substitution at 3 or 3' position of thioxanthone, because of buried π state and high energy π^* state, the S₁ -³ nπ^* gap becomes negative. This leads to a high Φ_ISC (>0.9), which is key to being an effective photocatalyst.

Norbornene-Substituted Cationic Iridium(III) Complex and Water-Soluble Luminescent Polymers Based on It: Synthesis, Photophysical and Cytotoxic Properties

Abstract

A norbornene-substituted cationic iridium(III) complex containing 1-phenylisoquinoline cyclometalating ligands and an additional phenylimidazophenanthroline ligand was synthesized. On the base of this complex, water-soluble polymers were obtained by ring-opening metathesis polymerization (ROMP). The resulting polymers showed oxygen-dependent phosphorescence in the orange spectral region and high cytotoxicity against HCT116 cancer cells.

Ir(III) Complexes with AIE Characteristics for Biological Applications

Both biological process detection and disease diagnosis on the basis of luminescence technology can provide comprehensive insights into the mechanisms of life and disease pathogenesis and also accurately guide therapeutics. As a family of prominent luminescent materials, Ir(III) complexes with aggregation-induced emission (AIE) tendency have been recently explored at a tremendous pace for biological applications, by virtue of their various distinct advantages, such as great stability in biological media, excellent fluorescence properties and distinctive photosensitizing features. Significant breakthroughs of AIE-active Ir(III) complexes have been achieved in the past few years and great progress has been witnessed in the construction of novel AIE-active Ir(III) complexes and their applications in organelle-specific targeting imaging, multiphoton imaging, biomarker-responsive bioimaging, as well as theranostics. This review systematically summarizes the basic concepts, seminal studies, recent trends and perspectives in this area.

A cationic iridium(III) complex containing a thiosemicarbazide unit: Synthesis and application for turn-on chemiluminescent detection of Hg2

A novel cationic iridium(III) complex [(ppy)₂Ir(bPCPC)]PF₆ (ppy: 2-phenylpyridine; bPCPC: 2-([2,2'-bipyridine]-4-carbonyl)-N-phenylhydrazinecarbothioamide) containing a thiosemicarbazide unit was designed and synthesized. The thiosemicarbazide unit was a sensitive functional group to Hg²⁺, when it reacted with Hg²⁺, it was desulphurized and thus led to the formation of 1,3,4-oxadiazole, [(ppy)₂Ir(bPCPC)]PF₆ resultantly was used as a "turn-on" chemodosimeter for luminescent detection of Hg²⁺ in DMF/PBS buffer solution at pH = 7-11. Except for Ag⁺, recognition capability of [(ppy)₂Ir(bPCPC)]PF₆ to Hg²⁺ was not interfered by other common metal ions (Co²⁺, Li⁺, Zn²⁺, Pb²⁺, K⁺, Al³⁺, Na⁺, Mn²⁺, Cu²⁺, Fe²⁺, Fe³⁺, Cr³⁺, Ba²⁺, Mg²⁺, Ni²⁺ and Ca²⁺). The detection limit was 1.83 × 10^-9 mol∙L^-1 (0.37 ppb), which indicated the complex was a highly sensitive chemiluminescent detection reagent of Hg²⁺.

Near-infrared phosphorescent carbon dots for sonodynamic precision tumor therapy

Theranostic sonosensitizers with combined sonodynamic and near infrared (NIR) imaging modes are required for imaging guided sonodynamic therapy (SDT). It is challenging, however, to realize a single material that is simultaneously endowed with both NIR emitting and sonodynamic activities. Herein, we report the design of a class of NIR-emitting sonosensitizers from a NIR phosphorescent carbon dot (CD) material with a narrow bandgap (1.62 eV) and long-lived excited triplet states (11.4 μs), two of which can enhance SDT as thermodynamically and dynamically favorable factors under low-intensity ultrasound irradiation, respectively. The NIR-phosphorescent CDs are identified as bipolar quantum dots containing both p- and n-type surface functionalization regions that can drive spatial separation of e⁻–h⁺ pairs and fast transfer to reaction sites. Importantly, the cancer-specific targeting and high-level intratumor enrichment of the theranostic CDs are achieved by cancer cell membrane encapsulation for precision SDT with complete eradication of solid tumors by single injection and single irradiation. These results will open up a promising approach to engineer phosphorescent materials with long-lived triplet excited states for sonodynamic precision tumor therapy.

Combining sonodynamic properties and NIR fluorescence into a single material is desired for deep tissue applications. Here, the authors report on carbon dot sono-sensitizers engineered with a narrow bandgap and coated with cancer cell membrane for targeted NIR guided sonodynamic cancer therapy.

Rational Design of Mono- and Bi-Nuclear Cyclometalated Ir(III) Complexes Containing Di-Pyridylamine Motifs: Synthesis, Structure, and Luminescent Properties

Heteroleptic cyclometalated iridium (III) complexes (1–3) containing di-pyridylamine motifs were prepared in a stepwise fashion. The presence of the di-pyridylamine ligands tunes their electronic and optical properties, generating blue phosphorescent emitters at room temperature. Herein we describe the synthesis of the mononuclear iridium complexes [Ir(ppy)₂(DPA)][OTf] (1), (ppy = phenylpyridine; DPA = Dipyridylamine) and [Ir(ppy)₂(DPA-PhI)][OTf] (2), (DPA-PhI = Dipyridylamino-phenyliodide). Moreover, the dinuclear iridium complex [Ir(ppy)₂(L)Ir(ppy)₂][OTf]₂ (3) containing a rigid angular ligand “L = 3,5-bis[4-(2,2′-dipyridylamino)phenylacetylenyl]toluene” and displaying two di-pyridylamino groups was also prepared. For comparison purposes, the related dinuclear rhodium complex [Rh (ppy)₂(L)Rh(ppy)₂][OTf]₂ (4) was also synthesized. The x-ray molecular structure of complex 2 was reported and confirmed the formation of the target molecule. The rhodium complex 4 was found to be emissive only at low temperature; in contrast, all iridium complexes 1–3 were found to be phosphorescent in solution at 77 K and room temperature, displaying blue emissions in the range of 478–481 nm.

Iridium Complex-Loaded Sorafenib Nanocomposites for Synergistic Chemo-photodynamic Therapy of Hepatocellular Carcinoma

Although sorafenib, a multi-kinase inhibitor, has provided noteworthy benefits in patients with hepatocellular carcinoma (HCC), the inevitable side effects, narrow therapeutic window, and low bioavailability seriously affect its clinical application. To be clinically distinctive, innovative drugs must meet the needs of reaching tumor tissues and cause limited side effects to normal organs and tissues. Recently, photodynamic therapy, utilizing a combination of a photosensitizer and light irradiation, was selectively accumulated at the tumor site and taken up effectively via inducing apoptosis or necrosis of cancer cells. In this study, a nano-chemo-phototherapy drug was fabricated to compose an iridium-based photosensitizer combined with sorafenib (IPS) via a self-assembly process. Compared to the free iridium photosensitizer or sorafenib, the IPS exhibited significantly improved therapeutic efficacy against tumor cells because of the increased cellular uptake and the subsequent simultaneous release of sorafenib and generation of reactive oxygen species production upon 532 nm laser irradiation. To evaluate the effect of synergistic treatment, cytotoxicity detection, live/dead staining, cell proliferative and apoptotic assay, and Western blot were performed. The IPS exhibited sufficient biocompatibility by hemolysis and serum biochemical tests. Also, the results suggested that IPS significantly inhibited HCC cell proliferation and promoted cell apoptosis. More importantly, marked anti-tumor growth effects via inhibiting cell proliferation and promoting tumor cell death were observed in an orthotopic xenograft HCC model. Therefore, our newly proposed nanotheranostic agent for combined chemotherapeutic and photodynamic therapy notably improves the therapeutic effect of sorafenib and has the potential to be a new alternative option for HCC treatment.

Ultrasensitive Reagent for Ratiometric Detection and Detoxification of III in Water and Mitochondria

Toxicity induced by inorganic arsenic as AsO₃^3- (iAs^III) is of global concern. Reliable detection of the maximum allowed contaminant level for arsenic in drinking water and in the cellular system remains a challenge for the water quality management and assessment of toxicity in the cellular milieu, respectively. A new Ir(III)-based phosphorescent molecule (AS-1; λ_Ext = 415 nm and λ_Ems = 600 nm, Φ = 0.3) is synthesized for the selective detection of iAs^III in an aqueous solution with a ratiometric luminescence response even in the presence of iAs^V and all other common inorganic cations and anions. The relatively higher affinity of the thioimidazole ligand (HPBT) toward iAs^III led to the formation of a fluorescent molecule iAs^V-HPBT (λ_Ext = 415 nm and λ_Ems = 466 nm, Φ = 0.28) for the reaction of iAs^III and AS-1. An improved limit of quantitation (LOQ) down to 0.2 ppb is achieved when AS-1 is used in the CTAB micellar system. Presumably, the cationic surfactants favor the localization of AS-1@CTAB^Micelle in mitochondria of MCF7 cells, and this is confirmed from the images of the confocal laser fluorescence scanning microscopic studies. Importantly, cell viability assay studies confirm that AS-1@CTAB^Micelle induces dose-dependent detoxification of iAs^III in live cells. Further, luminescence responses at 466 nm could be utilized for developing a hand-held device for the in-field application. Such a reagent that allows for ratiometric detection of iAs^III with LOQ of 2.6 nM (0.5 ppb) in water, as well as helps in visualizing its distribution in mitochondria with a detoxifying effect, is rather unique in contemporary literature.

AIE-active iridium(III) complex integrated with upconversion nanoparticles for NIR-irradiated photodynamic therapy

The integration of an aggregation induced emission (AIE)-active Ir(III) complex and upconversion nanoparticles (UCNPs) has achieved a NIR-irradiated photosensitizer (PS), UCNPs@Ir-2-N. This PS has satisfactory biocompatibility, excellent phototoxicity, good accumulation in cells and high ¹O₂ generation ability, thereby effectively killing 4T1 mouse cancer cells in vitro. This work has potential for future photodynamic therapy (PDT) applications.

Fluorene-decorated Ir(III) complexes: synthesis, photophysics and tunable triplet excited state properties in aggregation

Two new heteroleptic cationic Ir(III) complexes bearing benzothiazole and pyridine motifs on fluorene groups were synthesized and characterized. Complexes Ir1 and Ir2 exhibit ¹π,π* transitions below 430 nm, with broad but weak metal-to-ligand and ligand-to-ligand charge transfer absorption bands above 430 nm. Both complexes possess long-lived emissions (τ_em = 0.37 μs for Ir1, τ_em = 5.41 μs for Ir2) and triplet excited states (τ_TA = 0.14 μs for Ir1, τ_TA = 6.06 μs for Ir2). Their optical properties in solution and aggregated states were also investigated. Both Ir(III) complexes exhibit aggregation-induced phosphorescence emission behavior in an acetonitrile-water mixture. As the water content increased to 90%, the emission intensities of complexes Ir1 and Ir2 increased nearly 3 times and 2.8 times, respectively. Moreover, nonlinear transmittance experiments were performed in CH₃CN and a CH₃CN-H₂O mixture (f_w = 90%), and the strength of the reverse saturable absorption (RSA) at 532 nm followed the trend: Ir2 (CH₃CN) ≥ Ir1 (CH₃CN) > Ir2 (CH₃CN-H₂O) > Ir1 (CH₃CN-H₂O). Abundant triplet state excitons participated in the radiative transition progress, which inhibited the RSA process. These results indicate that the fluorene-decorated Ir(III) complexes are suitable for aggregation emission and optical power limiting applications.

Post-complexation Functionalization of Cyclometalated Iridium(III) Complexes and Applications to Biomedical and Material Sciences

Cyclometalated iridium(III) (Ir(III)) complexes exhibit excellent photophysical properties that include large Stokes shift, high emission quantum yields, and microsecond-order emission lifetimes, due to low-lying metal-to-ligand charge transfer (spin-forbidden singlet-triplet (³MLCT) transition). As a result, analogs have been applied for research not only in the material sciences, such as the development of organic light-emitting diodes (OLEDs), but also for photocatalysts, bioimaging probes, and anticancer reagents. Although a variety of methods for the synthesis and the applications of functionalized cyclometalated iridium complexes have been reported, functional groups are generally introduced to the ligands prior to the complexation with Ir salts. Therefore, it is difficult to introduce thermally unstable functional groups such as peptides and sugars due to the harsh reaction conditions such as the high temperatures used in the complexation with Ir salts. In this review, the functionalization of Ir complexes after the formation of cyclometalated Ir complexes and their biological and material applications are described. These methods are referred to as "post-complexation functionalization (PCF)." In this review, applications of PCF to the design and synthesis of Ir(III) complexes that exhibit blue -red and white color emissions, luminescence pH probes, luminescent probes of cancer cells, compounds that induce cell death in cancer cells, and luminescent complexes that have long emission lifetimes are summarized.

Phosphorescent Ir(III) Complexes for Biolabeling and Biosensing

Cyclometalated Ir(III) complexes exhibit strong phosphorescence emission with lifetime of submicroseconds to several microseconds at room temperature. Their synthetic versatility enables broad control of physical properties, such as charge and lipophilicity, as well as emission colors. These favorable properties have motivated the use of Ir(III) complexes in luminescent bioimaging applications. This review examines the recent progress in the development of phosphorescent biolabels and sensors based on Ir(III) complexes. It begins with a brief introduction about the basic principles of the syntheses and photophysical processes of cyclometalated Ir(III) complexes. Focus is placed on illustrating the broad imaging utility of Ir(III) complexes. Phosphorescent labels illuminating intracellular organelles, including mitochondria, lysosomes, and cell membranes, are summarized. Ir(III) complexes capable of visualization of tumor spheroids and parasites are also introduced. Facile chemical modification of the cyclometalating ligands endows the Ir(III) complexes with strong sensing ability. Sensors of temperature, pH, CO₂, metal ions, anions, biosulfur species, reactive oxygen species, peptides, and viscosity have recently been added to the molecular imaging tools. This diverse utility demonstrates the potential of phosphorescent Ir(III) complexes toward bioimaging applications.