Palladium-anchored calix[4]arene-derived porous organic polymer towards efficient hydrolytic cleavage of carbon disulfide

The release of carbon disulfide can have adverse effects on our environment and human health. The stability of carbon disulfide and the slow kinetics of hydrolysis can make it challenging to achieve efficient and practical cleavage of the CS bonds. Herein, a calix[4]arene-based porous organic polymer (CPOP-1) is innovatively synthesized through an optimized polycondensation reaction using C-Methylcalix[4]resorcinarene and hexafluoro-hexaazatriphenylene as monomers. Subsequently, palladium-induced calix[4]arene-based porous organic polymer was also synthesized via strong Pd-N coordination bonds to construct the metal-induced porous catalyst (CPOP-2). The polymeric catalyst active center [Pd2+(N^N)(NO3-)2] demonstrated outstanding catalytic hydrolysis performance (11.14 μmol g-1 h-1) in 10.5 h which is significantly enhanced by ca.13.2 times as compared to reported mononuclear Bpy-Pd(NO3)2, and 7.07 times than model trinuclear complex catalyst HATN-Pd-1, respectively. The control experiments revealed that POP catalysts showcased robust stability, prolonged effectiveness, and feasible recyclability during the hydrolytic cleavage of carbon disulfide at room temperature in aqueous solutions. Furthermore, the coordination environment of [Pd2+(N^N)] was validated through XPS, EXAFS, and isotope labeling measurements, and the hydrolysis cleavage products were confirmed e. g. CO2, sulfide, and protons. More importantly, a reaction mechanism was formulated coupled with theoretical calculations, and simulations. The proposed mechanism involves sequential OH- nucleophilic attacks on the carbon atoms of insert-coordinated CS2 and COS, leading to the cleavage of double CS bonds and the formation of CO bonds. The concurrent dissociation of the C-S bond and liberation of CO2 result in an intermediate structure characterized by [(N^N)Pd2+](SH-)2. This intermediate motif serves as the source of the thermodynamic driving force for the reaction.

Copper-Catalyzed Three-Component Synthesis of β-Hydroxysulfides from Styrene Oxide, Aryl Iodide, and Carbon Disulfide

A copper-catalyzed three-component coupling reaction of styrene oxide, aryl iodide, and carbon disulfide for the construction of β-hydroxysulfides has been developed. In this process, readily available CS2 was used as the sulfur source to construct C-S bonds for the synthesis of phenyl-β-hydroxysulfides and (benzo[d]thiazol)-β-hydroxysulfides. This process features mild reaction conditions, simple operation, and wide substrate scope (>50 examples).

Palladium-Catalyzed/Copper-Mediated Decarbonylative Cross-Coupling of S-Pyrimidyl Thioesters for Biaryl Synthesis

A palladium-catalyzed/copper-mediated cross-coupling of S-pyrimidinyl thioesters with arylboronic acids to yield biaryls is described. The reaction is likely to proceed via cleavage of the S-C(O) bond and subsequent release of CO, rather than via cleavage of the S-C(pyrimidine) bond and release of SCO, as supported by the results of both experimental and computational studies. The investigation of the reaction scope with various S-pyrimidinyl thioesters and arylboronic acids showed that the reaction is significantly affected by the substituent of the thioester and the presence of a chelatable ortho substituent was found to increase reaction efficiency.

Bimetallic Perthiocarbonate Complexes of Cobalt: Synthesis, Structure and Bonding

The syntheses and structural elucidation of bimetallic thiolate complexes of early and late transition metals are described. Thermolysis of the bimetallic hydridoborate species [{Cp*CoPh}{µ-TePh}{µ-TeBH3-ĸ2Te,H}{Cp*Co}] (Cp* = ɳ5-C5Me5) (1) in the presence of CS2 afforded the bimetallic perthiocarbonate complex [(Cp*Co)2(μ-CS4-κ1S:κ2S')(μ-S2-κ2S″:κ1S‴)] (2) and the dithiolene complex [(Cp*Co)(μ-C3S5-κ1S,S'] (3). Complex 2 contains a four-membered metallaheterocycle (Co2S2) comprising a perthiocarbonate [CS4]2- unit and a disulfide [S2]2- unit, attached opposite to each other. Complex 2 was characterized by employing different multinuclear NMR, infrared spectroscopy, mass spectrometry, and single-crystal X-ray diffraction studies. Preliminary studies show that [Cp*VCl2]3 (4) with an intermediate generated from CS2 and [LiBH4·THF] yielded thiolate species, albeit different from the cobalt system. Furthermore, a computational analysis was performed to provide insight into the bonding of this bimetallic perthiocarbonate complex.

Sulfur in Waste-Free Sustainable Synthesis: Advancing Carbon-Carbon Coupling Techniques

This review explores the pivotal role of sulfur in advancing sustainable carbon-carbon (C-C) coupling reactions. The unique electronic properties of sulfur, as a soft Lewis base with significant mesomeric effect make it an excellent candidate for initiating radical transformations, directing C-H-activation, and facilitating cycloaddition and C-S bond dissociation reactions. These attributes are crucial for developing waste-free methodologies in green chemistry. Our mini-review is focused on existing sulfur-directed C-C coupling techniques, emphasizing their sustainability and comparing state-of-the-art methods with traditional approaches. The review highlights the importance of this research in addressing current challenges in organic synthesis and catalysis. The innovative use of sulfur in photocatalytic, electrochemical and metal-catalyzed processes not only exemplifies significant advancements in the field but also opens new avenues for environmentally friendly chemical processes. By focusing on atom economy and waste minimization, the analysis provides broad appeal and potential for future developments in sustainable organic chemistry.

Desulfurative Functionalization of β-Acyl Allylic Sulfides with N-H Free Indoles Highly Regioselective at C3 and N1 Positions: Rapid Access to α-Branched Enones

A regiodivergent allylation of 1H-indoles highly selectively at the C3 and N1 positions with β-acyl allylic sulfides through desulfurative C-C/C-N bond-forming reactions has been developed under mild conditions. Notably, the remarkable site-selective switch can be achieved by a delicate choice of solvents and bases. This cost-efficient method displays a broad substrate scope, good functional compatibility, and excellent site-selectivity, thus offering a divergent synthesis of indole substituted α-branched enones, which possess diverse potential opportunities for further applications and derivatization.

Ru-Catalyzed and Selenium-Directed Selective Formation of ortho- and Dialkenylated Selanes, Mixed Organoselenoethers, and Isoselenochromenes

Herein, the Ru-catalyzed chemo- and regioselective formation of four novel organoselenium compounds is established. Mono- and dialkenylated selanes were formed by the Se-directed o-C-H activation of benzyl(phenyl)selanes with alkynes. Unprecedented debenzylative/dearylative hydroselenations of alkynes were performed by slightly varying the amount of catalyst and temperature. Catalyst-driven direct formation of novel isoselenochromenes is also recorded. Altogether, 45 new organoseleno compounds were synthesized in good amounts with varieties of alkynes and selanes. This is the first report of its kind to deal with the synthesis of novel, challenging, and unusual organoseleno compounds in one reaction.

Electrochemical desulfurative formation of C-N bonds through selective activation of inert C(sp3)-S bonds

In this study, we introduce an efficient, metal-free electrocatalytic desulfurative protocol for forming C-N bonds by selectively activating inert C(sp3)-S bonds of alkyl thioethers. This method offers a straightforward and environmentally friendly approach for modification of heterocyclic compounds from readily accessible thioethers. Preliminary mechanistic investigations suggest that the reaction proceeds via a carbocation intermediate. Furthermore, successful synthesis on a 10-gram scale was achieved in a continuous flow electrochemical reactor.

Desulfurization of thiosemicarbazones: the role of metal ions and biological implications

Thiosemicarbazones are biologically active substances whose structural formula is formed by an azomethine, an hydrazine, and a thioamide fragments, to generate a R2C=N-NR-C(=S)-NR2 backbone. These compounds often act as ligands to generate highly stable metal-organic complexes. In certain experimental conditions, however, thiosemicarbazones undergo reactions leading to the cleavage of the chain. Sometimes, the breakage involves desulfurization processes. The present work summarizes the different chemical factors that influence the desulfurization reactions of thiosemicarbazones, such as pH, the presence of oxidant reactants or the establishment of redox processes as those electrochemically induced, the effects of the solvent, the temperature, and the electromagnetic radiation. Many of these reactions require coordination of thiosemicarbazones to metal ions, even those present in the intracellular environment. The nature of the products generated in these reactions, their detection in vivo and in vitro, together with the relevance for the biological activity of these compounds, mainly as antineoplastic agents, is discussed.

Glyoxylic Acid Monohydrate-Promoted Formation of the C-SO2 Bond Starting from Maleimides/Quinones and Sodium Sulfinates

By using glyoxylic acid monohydrate as a promoter, a wide range of substances containing a C-SO2 bond could be obtained from N-substituted maleimides or quinones and sodium sulfinates. The protocol features mild reaction conditions, short reaction time, and good atomic economics, which provides an alternative protocol for the α-sulfonylation of α,β-unsaturated ketones.

Nickel-Catalyzed Acid Chlorides with Tetrasulfides for the Synthesis of Thioesters and Acyl Disulfides

Herein, we report a novel method for the synthesis of thioesters and acyl disulfides via nickel-catalyzed reductive cross-electrophile coupling of acid chlorides with tetrasulfides. This approach for the synthesis of thioesters and acyl disulfides is convenient and practical under mild reaction conditions, relying on easy availability. In addition, a wide range of thioesters and acyl disulfides were obtained in medium to good yields with good functional group tolerance. Moreover, thioesters and acyl disulfides can also be prepared at the gram scale, indicating that they have certain potential for industrial application.

Selective C(sp3)-S Bond Cleavage of Thioethers to Build Up Unsymmetrical Disulfides

The selective C(sp3)-S bond cleavage of thioethers was first developed to prepare unsymmetrical disulfides by using electrophilic halogenation reagents. In this strategy, NBS (N-bromosuccinimide) achieves selective furfuryl C(sp3)-S bond cleavage of furfuryl alkylthioethers at room temperature. Meanwhile, NFSI (N-fluorobenzenesulfonimide) enables selective methyl C(sp3)-S bond cleavage of aryl and alkyl methylthioethers at an elevated temperature. Notably, the substrate scope investigation indicates that the order of selectivity of the C-S bond cleavage is furfuryl C(sp3)-S > benzyl C(sp3)-S > alkyl C(sp3)-S > C(sp2)-S bond. Moreover, this practical and operationally simple strategy also provides an important complementary way to access various unsymmetrical disulfides with excellent functional group tolerances and moderate to good yields.

Nickel-Catalyzed Cross-Coupling Reaction of Aryl Methyl Sulfides with Aryl Bromides

A nickel-catalyzed cross-coupling reaction of aryl methyl sulfides with aryl bromides has been developed to access biaryls in yields of up to 86%. The reactions proceeded well using Ni(COD)2 as catalyst with the ligand BINAP (2,2'-bis(diphenylphosphanyl)-1,1'-binaphthalene) in the presence of magnesium. The method has a broad scope of substrates and is scalable. The wide availability of commercially available aryl bromides and the absence of preparation and preparation of organometallic reagents make the reaction of high application value.

Room Temperature Anhydrous Suzuki-Miyaura Polymerization Enabled by C-S Bond Activation

The Suzuki-Miyaura cross-coupling is one of the most important and powerful methods for constructing C-C bonds. However, the protodeboronation of arylboronic acids hinder the development of Suzuki-Miyaura coupling in the precise synthesis of conjugated polymers (CPs). Here, an anhydrous room temperature Suzuki-Miyaura cross-coupling reaction between (hetero)aryl boronic esters and aryl sulfides was explored, of which universality was exemplified by thirty small molecules and twelve CPs. Meanwhile, the mechanistic studies involving with capturing four coordinated borate intermediate revealed the direct transmetalation of boronic esters in the absence of H2 O suppressing the protodeboronation. Additionally, the room temperature reaction significantly reduced the homocoupling defects and enhanced the optoelectronic properties of the CPs. In all, this work provides a green protocol to synthesize alternating CPs.

Electroreductive Desulfurative Transformations with Thioethers as Alkyl Radical Precursors

Thioethers are highly prevalent functional groups in organic compounds of natural and synthetic origin but remain remarkably underexplored as starting materials in desulfurative transformations. As such, new synthetic methods are highly desirable to unlock the potential of the compound class. In this vein, electrochemistry is an ideal tool to enable new reactivity and selectivity under mild conditions. Herein, we demonstrate the efficient use of aryl alkyl thioethers as alkyl radical precursors in electroreductive transformations, along with mechanistic details. The transformations proceed with complete selectivity for C(sp3 )-S bond cleavage, orthogonal to that of established transition metal-catalyzed two-electron routes. We showcase a hydrodesulfurization protocol with broad functional group tolerance, the first example of desulfurative C(sp3 )-C(sp3 ) bond formation in Giese-type cross-coupling and the first protocol for electrocarboxylation of synthetic relevance with thioethers as starting materials. Finally, the compound class is shown to outcompete their well-established sulfone analogues as alkyl radical precursors, demonstrating their synthetic potential for future desulfurative transformations in a one-electron manifold.

Oxidative cleavage and ammoxidation of organosulfur compounds via synergistic Co-Nx sites and Co nanoparticles catalysis

The cleavage and functionalization of C-S bonds have become a rapidly growing field for the design or discovery of new transformations. However, it is usually difficult to achieve in a direct and selective fashion due to the intrinsic inertness and catalyst-poisonous character. Herein, for the first time, we report a novel and efficient protocol that enables direct oxidative cleavage and cyanation of organosulfur compounds by heterogeneous nonprecious-metal Co-N-C catalyst comprising graphene encapsulated Co nanoparticles and Co-Nx sites using oxygen as environmentally benign oxidant and ammonia as nitrogen source. A wide variety of thiols, sulfides, sulfoxides, sulfones, sulfonamides, and sulfonyl chlorides are viable in this reaction, enabling access to diverse nitriles under cyanide-free conditions. Moreover, modifying the reaction conditions also allows for the cleavage and amidation of organosulfur compounds to deliver amides. This protocol features excellent functional group tolerance, facile scalability, cost-effective and recyclable catalyst, and broad substrate scope. Characterization and mechanistic studies reveal that the remarkable effectiveness of the synergistic catalysis of Co nanoparticles and Co-Nx sites is crucial for achieving outstanding catalytic performance.

Construction of Chalcogenated Methylene Chroman-3-ones via Palladium-Catalyzed Carbocyclization

We report herein the synthesis of exo-chalcogenated methylene chroman-3-ones via palladium-catalyzed intramolecular acyl-chalcogenation of alkyne with thio- and selenoesters. Chalcogen containing tetrasubstituted alkenes are obtained stereoselectively. This protocol tolerates various functional groups and heterocycles, affording the chroman-3-one products in moderate-to-good yields.

Bifunctional 1-Hydroxypyrene Photocatalyst for Hydrodesulfurization via Reductive C(Aryl)-S Bond Cleavage

We developed the visible-light-induced hydrodesulfurization of alkyl aryl thioethers via the reductive cleavage of the C(aryl)-S bond using 1-hydroxypyrene as a Brønsted acid-reductant bifunctional photocatalyst. The hydrodesulfurization reaction proceeded under simple reaction conditions (1-hydroxypyrene and Et₃N in THF under purple LED illumination); this reaction did not require chemicals commonly used for hydrodesulfurization, such as hydrosilanes, transition metal catalysts, and/or stoichiometric amounts of metal reagents. Detailed mechanistic studies based on control experiments, spectroscopic measurements, and computational studies revealed that the cleavage of the C(aryl)-S bond and the formation of the C(aryl)-H bond proceeded via the formation of the ion pair between the radical anion of alkyl aryl thioether and Et₃N⁺H, resulting in the generation of a sulfur radical. In addition, the 1-hydroxypyrene catalyst was regenerated via hydrogen atom transfer (HAT) from Et₃N.

Optical sensor arrays for the detection and discrimination of natural products

Covering: up to the end of 2022Natural products (NPs) have found uses in medicine, food, cosmetics, materials science, environmental protection, and other fields related to our life. Their beneficial properties along with potential toxicities make the detection and discrimination of NPs crucial for their applications. Owing to the merits of low cost and simple operation, optical sensor arrays, including colorimetric and fluorometric sensor arrays, have been widely applied in the detection of small molecule NPs and discrimination of structurally similar small molecule NPs or complex mixtures of NPs. This review provides a brief introduction to the optical sensor array and focuses on its progress toward the detection and discrimination of NPs. We summarized the design principle of sensor arrays toward various NPs (i.e., saccharides and polyhydroxy compounds, organic acids, flavonoids, organic sulfur compounds, amines, amino acids, and saponins) based on their functional groups and characteristic chemical properties, along with representative examples. Moreover, the challenges and potential directions for further research of optical sensor arrays for NPs are proposed.

Nickel-Catalyzed Direct Cross-Coupling of Aryl Thioether with Aryl Bromide

A straightforward cross-coupling of aryl thioether with aryl bromide with the aid of nickel salt, magnesium, and lithium chloride in tetrahydrofuran at ambient temperature was accomplished. The one-pot reactions proceeded efficiently via C-S bond cleavage to produce the desired biaryls in modest to good yields, avoiding the use of pregenerated or commercial organometallic reagents.

Thioetherification of Br-Mercaptobiphenyl Molecules on Au(111)

Thioether polymers are fundamental for a variety of applications. Their synthesis is, however, more challenging than that of other metal-catalyzed reactions due to the reported detachment of the S atom during thermal activation. In this study, it has been demonstrated unambiguously that thermal annealing results in the thioetherification of the 4-bromo-4-mercaptobiphenyl molecule (Br-MBP) adsorbed on the surface of Au(111). Through complementary techniques, such as scanning tunneling microscopy, spectroscopy, and first-principle calculations, we have identified four reaction steps, involving sulfhydryl or bromine molecular functional groups and leading to the formation of intermolecular C-S bonds. To form the thioether polymer and to overcome the competitive formation of C-C bonds, two reaction steps, the dehalogenation, and dissociation of the S-Au bond, must occur simultaneously. We detail the electronic properties of the phenyl-sulfur bond and the polymer as a function of the ligand length. This result suggests a wider perspective of this chemical synthesis.

Synthesis of Sulfur-Containing Oxindoles by Photoinduced Alkene Difunctionalization via Sulfur 1,2-Relocation

Organosulfur compounds are prevalent in various natural products, which have been widely applied in agrochemicals and pharmaceuticals. Herein, a new approach for the efficient construction of sulfur-containing oxindoles by photoinduced alkene difunctionalization via sulfur 1,2-relocation is developed. The method exhibited a high functional group tolerance and broad substrate compatibility. A library of sulfur-containing oxindole derivatives were synthesized under mild conditions (metal-, photocatalyst-, and additive-free). Mechanistic investigations revealed this photochemical process was triggered by the formation of an EDA complex of oxindole enolates with a redox-active ester, and the in situ generation of alkenes from the C-S bond cleavage of β-sulfanyl radicals was a key step in this transformation.

Divergent Acyl and Decarbonylative Liebeskind-Srogl Cross-Coupling of Thioesters by Cu-Cofactor and Pd-NHC (NHC = N-Heterocyclic Carbene) Catalysis

Transition-metal-catalyzed cross-coupling reactions of thioesters by selective acyl C(O)-S cleavage have emerged as a powerful platform for the preparation of complex molecules. Herein, we report divergent Liebeskind-Srogl cross-coupling of thioesters by Pd-NHC (NHC = N-heterocyclic carbene) catalysis. The reaction provides straightforward access to functionalized ketones by highly selective C(acyl)-S cleavage under mild conditions. Most crucially, the conditions enable direct functionalization of a range of complex pharmaceuticals decorated with a palette of sensitive functional groups, providing attractive products for medicinal chemistry programs. Furthermore, decarbonylative Liebeskind-Srogl cross-coupling by C(acyl)-S/C(aryl)-C(O) cleavage is reported. Cu metal cofactor directs the reaction pathway to acyl or decarbonylative pathway. This reactivity is applicable to complex pharmaceuticals. The reaction represents the mildest decarbonylative Suzuki cross-coupling discovered to date. The Cu-directed divergent acyl and decarbonylative cross-coupling of thioesters opens up chemical space in complex molecule synthesis.

Serendipitous synthesis of cross-conjugated dienes by cascade deconstructive esterification of thiomorpholinone-tethered alkenoic acids

Functionalized 1,3-dienes are ubiquitous structural motifs in biologically pertinent molecules. They are frequently employed as precursors for a broad range of chemical transformations, including Diels-Alder reactions. The stereoselective construction of highly decorated 1,3-dienes therefore represents an important research objective. Medicinal chemists are becoming increasingly interested in synthetic methodologies that not only achieve expedient construction and peripheral editing of heterocycles, but also seek to modify their core framework in order to achieve skeletal remodeling. In a succinct manifestation of this 'scaffold hopping' concept, we herein describe a cascade reaction, which converts thiomorpholinone-tethered alkenoic acids to 1,1-disubstituted amino-1,3-dienes. This domino process involves esterification of the acid, base-assisted ring-opening, and concomitant 1,2-migration of the α-amino alkenyl group. Several control experiments have revealed that the alkenyl substituent is necessary for deconstruction to occur. Inherently more activated N-aryl-substituted thiomorpholinone acids react significantly faster than their less activated N-alkyl congeners.

Buchwald-Hartwig Amination and C-S/S-H Metathesis of Aryl Sulfides by Selective C-S Cleavage Mediated by Air- and Moisture-Stable [Pd(NHC)(μ-Cl)Cl]2 Precatalysts: Unified Mechanism for Activation of Inert C-S Bonds

We report a combined experimental and mechanistic study on the Buchwald-Hartwig amination and C-S/S-H metathesis of aryl sulfides by selective activation of C-S bonds mediated by well-defined, air- and moisture-stable Pd(II)-NHC precatalysts, [Pd(NHC)(μ-Cl)Cl]₂. This class of Pd(II)-NHC precatalysts displays excellent activity in the cross coupling of aryl sulfides. Most crucially, we unravel the unified mechanism for activation of C-S bonds in the C-N cross-coupling and C-S metathesis manifolds, where the inert C-S bond serves as a precursor to valuable amine or thioether products.

Copper-Catalyzed Synthesis of Multideuterium-Labeled Alcohols from Styrenes with CO and D2 as the Source of the Hydroxymethyl Group

Deuterated compounds have important applications, especially in the pharmaceutical field. Hence, the development of new and straightforward synthetic methods for the construction of deuterated compounds is becoming more and more attractive. We describe here a copper-catalyzed hydroxymethylation of aryl olefins with CO and D₂ as the source of hydroxymethyl group. Various multideuterium 1,1,2,3-d₄-labeled alcohols were produced directly. Mechanistic investigations established that the hydroxymethylation reaction proceeds via an in situ-generated carbon carbene intermediate.

Regio- and Stereoselective Synthesis of β-Methylthio Vinyl Triflates

Vinyl triflates are commonly employed as electrophilic vinyl sources in complex synthesis. The triflation of enolates is commonly required for the preparation of vinyl triflates, generally under strongly basic conditions. Herein, the reaction between alkynes and dimethyl(methylthio)sulfonium trifluoromethanesulfonate is presented, which leads to the development of a facile synthesis of β-methylthio vinyl triflates in a chemo-, regio-, and stereoselective manner under neutral and extremely simple conditions.

Ni-catalyzed C-S bond construction and cleavage

Sulfur-containing compounds have attracted considerable interest due to their wide-ranging applications in pharmaceuticals, agriculture, natural products, and organic materials. The development of efficient and rapid methods for the construction and transformation of sulfur-containing compounds is of great importance. Since nickel is inexpensive and has a variety of valence states, strong nucleophilicity and low energy barriers for oxidative addition, the construction and transformation of sulfur-containing compounds by nickel-catalyzed cross-coupling have become important strategies. In addition, sulfur-containing compounds have also been playing increasingly important roles in the field of cross-coupling due to their thermodynamically stable but dynamic activity. This review will focus on nickel-catalyzed construction and transformation of various sulfide-containing compounds, such as sulfides, disulfides, and hypervalent sulfur-containing compounds.

Chromium-catalyzed couplings of C(aryl)-SMe bonds for accessing arylated and alkylated benzaldehyde derivatives

Described here is the chromium-catalyzed cleavage of C(aryl)-SMe bonds leading to coupling with organomagnesium to give functionalized benzaldehydes under mild conditions. This reaction was promoted specifically by a low-cost and simple CrCl₂ salt used as a precatalyst, enabling synchronous activations of ortho-C(aryl)-SMe and ortho'-C(aryl)-H bonds to achieve difunctionalization of benzaldimines. This work provided a strategy for accessing arylated, alkylated, and diarylated benzaldehyde derivatives as a result of the couplings of C(aryl)-SMe and C(aryl)-SMe/C(aryl)-H bonds promoted with cost-effective Cr catalysis.

Application of DMSO as a methylthiolating reagent in organic synthesis

In the past decades, DMSO has been widely used not only as a common solvent but also as an environmentally benign oxidant in various organic transformations. Most strikingly, DMSO can be used as a sulfur source to construct methylthiolated building blocks of potential biologically active molecules, which is a remarkable achievement in the field of organic sulfur chemistry. The purpose of this review article is to summarize and discuss the main developments in the application of DMSO as a methylthiolating reagent to introduce the -SMe functionality in organic synthesis.

Synthesis of Symmetrical Sulfides Enabled by a Sulfur Dioxide Surrogate Acting as a Divalent Sulfur Source

Herein, we present a safe and practical methodology for synthesizing symmetrical sulfides using iodoarenes and potassium metabisulfite (K₂S₂O₅). While K₂S₂O₅ is known as a convenient sulfur dioxide surrogate, here it acts as a divalent sulfur source, pioneering its potential utility. The reaction exhibits wide substrate generality in which even highly bulky substrates can be applied to afford sterically congested sulfides.

An electron-deficient MOF as an efficient electron-transfer catalyst for selective oxidative carbon-carbon coupling of 2,6-di-tert-butylphenol

Naphthalene diimides (NDIs), a type of electron-deficient dye molecule with high quadrupole moment and excellent redox activity, have been utilized in various fields, such as energy transfer, chemical sensing, anion transport, and photo-/electrochromic materials. In this study, an electron-deficient metal-organic framework with one-dimensional channels, Eu₂(BBNDI)₃(DMF)₂ (MOF 1) (H₂BBNDI = N,N'-bis(3-benzoic acid)naphthalene diimide), was successfully constructed based on the naphthalene diimide derivative. Because of the generation of NDI radicals by electron transfer between components, this material exhibits fast-responsive reversible photochromic properties. Moreover, it shows high efficiency and selective oxidation of 2,6-di-tert-butylphenol to its quinone derivative, aldehyde, and dimeric or trimeric phenol derivative by controlling the reaction conditions.

Transition-metal-catalyzed remote C-H functionalization of thioethers

In the last decade, transition-metal-catalyzed direct C-H bond functionalization has been recognized as one of most efficient approaches for the derivatization of thioethers. Within this category, both mono- and bidentate-directing group strategies achieved the remote C(sp2)-H and C(sp3)-H functionalization of thioethers, respectively. This review systematically introduces the major advances and their mechanisms in the field of transition-metal-catalyzed remote C-H functionalization of thioethers from 2010 to 2021.

Modern Synthesis and Chemistry of Stabilized Ketene N,O-Acetals

Ketene N,O-acetals are robust and versatile synthons. Herein, we outline the synthesis of stable ketene N,O-acetals in the twenty-first century. In addition, we review recent developments in the chemistry of ketene N,O-acetals, as it applies to the vinylogous Mukaiyama aldol reaction, electrolysis, and pericyclic transformations. While dated reports rely on in situ use, modern methods of ketene N,O-acetal synthesis are heavily oriented towards producing products with high ‘bench’ stability; moreover, in the present century, chemists typically enhance the stability of ketene N,O-acetals by positioning an electron-withdrawing group at the β-terminus or at the N-position. As propitious substrates in the vinylogous Mukaiyama aldol reaction, ketene N,O-acetals readily provide polyketide adducts with high regioselectivity. When exposed to electrolysis conditions, the title functional group forms a reactive radical cation and cleanly couples with a variety of activated olefins. Given their electron-rich nature, ketene N,O-acetals act as facile substrates in several rearrangement reactions; further, ketene N,O-acetals reserve the ability to act as either dienophiles or dienes in Diels–Alder reactions. Lastly, ketene N,O-acetals are seemingly more stable than their O,O-counterparts and more reactive than analogous N,N- or S,S-acetals; these factors, in combination, make ketene N,O-acetals advantageous substitutes for other ketene acetal homologues.

1 Introduction

2 Select Methods of Stabilization-Oriented Ketene N,O-Acetal Synthesis

3 Ketene N,O-Acetals in the Vinylogous Mukaiyama Aldol Reaction

4 Ketene N,O-Acetals in Anodic Coupling and Electrochemical Oxidation Reactions

5 Rearrangement and Diels–Alder Reactions of Ketene N,O-Acetals

6 Conclusions, Perspectives, and Directions

PhIO-Mediated Oxidative C═C Bond Cleavage and Reassembly toward Highly Functionalized Oxazolones

An efficient PhIO-mediated oxidative C═C bond cleavage and reassembly of enaminone toward oxazolone with high regioselectivity has been reported. DFT calculations revealed that the reaction proceeded through an oxygen atom transfer, C═C bond cleavage, alkylthio migration, and reassembly cascade. This strategy is highlighted by high atom and step economy with formation of five bonds in one pot and generation of a high-valued oxazolone skeleton under mild conditions.

Total Synthesis of (±)-Spiroaxillarone A via a Reversible Sulfa-Michael Addition

A bioinspired strategy is described for the total synthesis of spiroaxillarone A, which exhibited significant antimalarial activity against resistant Plasmodium falciparum (IC₅₀ = 2.32 μM). The key steps include an intermolecular ethanethiol Michael addition, o-quinone Michael addition, and subsequent β-ethanethiol elimination. This synthetic sequence provides a potential biosynthetic pathway of spiroaxillarone A.

Efficient room temperature catalytic synthesis of alternating conjugated copolymers via C-S bond activation

Structural defects in conjugated copolymers are severely detrimental to the optoelectronic properties and the performance of the resulting electronic devices fabricated from them. Therefore, the much-desired precision synthesis of conjugated copolymers with highly regular repeat units is important, but presents a significant challenge to synthetic materials chemists. To this end, aryl sulfides are naturally abundant substances and offer unrealized potential in cross-coupling reactions. Here we report an efficient room temperature polycondensation protocol which implements aryl disulfide C-S activation to produce defect-minimized semiconducting conjugated copolymers with broad scope and applicability. Thus, a broad series of arylstannanes and thioethers are employed via the present protocol to afford copolymers with number-average molecular weights (M_ns) of 10.0–45.0 kDa. MALDI and NMR analysis of selected copolymers reveals minimal structural defects. Moreover, the polymer trap density here is smaller and the field effect mobility higher than that in the analogous polymer synthesized through thermal-activation Stille coupling.

Structural defects in conjugated copolymers are severely detrimental to the optoelectronic properties. Here the authors show an efficient room temperature polycondensation protocol which implements aryl disulfide C-S activation to produce defect-minimized semiconducting conjugated copolymers.

Synthesis and Biological Activity of 3-(Heteroaryl)quinolin-2(1H)-ones Bis-Heterocycles as Potential Inhibitors of the Protein Folding Machinery Hsp90

In the context of our SAR study concerning 6BrCaQ analogues as C-terminal Hsp90 inhibitors, we designed and synthesized a novel series of 3-(heteroaryl)quinolin-2(1H), of types 3, 4, and 5, as a novel class of analogues. A Pd-catalyzed Liebeskind-Srogl cross-coupling was developed as a convenient approach for easy access to complex purine architectures. This series of analogues showed a promising biological effect against MDA-MB231 and PC-3 cancer cell lines. This study led to the identification of the best compounds, 3b (IC₅₀ = 28 µM) and 4e, which induce a significant decrease of CDK-1 client protein and stabilize the levels of Hsp90 and Hsp70 without triggering the HSR response.

Photoinduced Aerobic C–S Borylation of Aryl Sulfides

The direct C–S borylation of aryl sulfides with B2pin2 has been achieved via a transition-metal-free photochemical process. With blue LED irradiation, aryl sulfides with various functional groups were converted to...