Reactivity of a triamidoamine terminal uranium(VI)-nitride with 3d-transition metal metallocenes

Reactions between [(TrenTIPS)UVIN] (1, TrenTIPS = {N(CH2CH2NSiPri3)3}3-) and [MII(η5-C5R5)2] (M/R = Cr/H, Mn/H, Fe/H, Ni/H) were intractable, but M/R = Co/H or Co/Me afforded [(TrenTIPS)UVN-(η1:η4-C5H5)CoI(η5-C5H5)] (2) and [(TrenTIPS)UIV-NH2] (3), respectively. For M/R = V/H [(TrenTIPS)UIV-NVIV(η5-C5H5)2] (4), was isolated. Complexes 2-4 evidence one-/two-electron uranium reductions, nucleophilic nitrides, and partial N-atom transfer.

A Thorium(IV) metallacyclopropyne complex

Actinide metallacyclic chemistry  has been of interest due to its involvement  in various chemical processes. However, fundamental understanding on the key species, actinide metallacyclic complexes, is limited to metallacyclopropenes whereas little is known about the actinide metallacyclopropynes presumably due to their unusual high reactivity. Herein, we report the preparation of a thorium metallacyclopropyne complex (η2-C ≡ C)ThCl3- in the gas phase by using electrospray ionization mass spectrometry, and it is generated via a single-ligand strategy through sequential losses of CO2 and HCl from the monopropynoate precursor (HC ≡ CCO2)ThCl4- upon collision-induced dissociation. Alternatively, the dual-ligand strategy involving consecutive losses of two CO2 and one C2H2 from the dipropynoate precursor (HC ≡ CCO2)2ThCl3- works as well. According to the reactivity experiments and theoretical calculations, (η2-C ≡ C)ThCl3- possesses a dianionic ligand C22- coordinated to the Th(IV) center in a side-on fashion. Further bonding analysis demonstrates the presence of a triple bond between the two C atoms, and the Th 5 f orbitals are significantly involved in the Th-(C ≡ C) bonding. A Th metallacyclopropyne structure is thus established for (η2-C ≡ C)ThCl3-.

Merging σ-Bond Metathesis with Polymerization Catalysis: Insights into Rare-Earth Metal Complexes, End-Group Functionalization, and Application Prospects

Polymers with well-defined structures, synthesized through metal-catalyzed processes, and having end groups exhibiting different polarity and reactivity than the backbone, are gaining considerable attention in both scientific and industrial communities. These polymers show potential applications as fundamental building blocks and additives in the creation of innovative functional materials. Investigations are directed toward identifying the most optimal and uncomplicated synthetic approach by employing a combination of living coordination polymerization mediated by rare-earth metal complexes and C-H bond activation reaction by σ-bond metathesis. This combination directly yields catalysts with diverse functional groups from a single precursor, enabling the production of terminal-functionalized polymers without the need for sequential reactions, such as termination reactions. The utilization of this innovative methodology allows for precise control over end-group functionalities, providing a versatile approach to tailor the properties and applications of the resulting polymers. This perspective discusses the principles, challenges, and potential advancements associated with this synthetic strategy, highlighting its significance in advancing the interface of metalorganic chemistry, polymer chemistry, and materials science.

Uranium versus Thorium: A Case Study on a Base-Free Terminal Uranium Imido Metallocene

The structure of and bonding in two base-free terminal actinide imido metallocenes, [η5-1,2,4-(Me3C)3C5H2]2An═N(p-tolyl) (An = U (1), Th (1')) are compared and connected to their individual reactivity. While structurally rather similar, the U(IV) derivative 1 is slightly more sterically crowded. Furthermore, density functional theory (DFT) studies imply that the 5f orbital contribution to the bonding within the individual actinide imido An═N(p-tolyl) moieties is significantly larger for 1 than for 1', which makes the bonds between the [η5-1,2,4-(Me3C)3C5H2]2U2+ and [(p-tolyl)N]2- fragments more covalent. Therefore, steric and electronic factors impact the reactivity of these imido complexes. For example, complex 1 is inert toward internal alkynes, but it readily forms Lewis base adducts [η5-1,2,4-(Me3C)3C5H2]2U═N(p-tolyl)(L) (L = OPMe3 (6), dmap (9), PhCN (14), and 2,6-Me2PhNC (17)) with Me3PO, 4-dimethylaminopyridine (dmap), nitrile, PhCN, or isonitrile 2,6-Me2PhNC. It may also react as a nucleophile or undergo a [2 + 2] cycloaddition with CS2, isothiocyanates, thio-ketones, ketones, lactides, and acyl nitriles, forming the four- or five-membered metallaheteroacycles, terminal sulfido, or oxido complexes, and cyanide amidate complexes, respectively. In contrast, after the addition of aldehyde p-tolylCHO, the tetranuclear complex [η5-1,2,4-(Me3C)3C5H2]4[OCH(p-tolyl)CH(p-tolyl)O]2U4O4 (10) is isolated. However, while 1 is unreactive toward dicyclohexylcarbodiimide (DCC), an equilibrium exists in benzene solution between N,N'-diisopropylcarbodiimide (DIC), 1, and the four-membered metallaheterocycle [η5-1,2,4-(Me3C)3C5H2]2U[N(p-tolyl)C(═NiPr)N(iPr)] (12). Furthermore, 1 may also engage in single- and two-electron transfer processes. It is singly oxidized by Ph3CN3, CuI, Ph2S2, and Ph2Se2, yielding the uranium(V) imido complexes [η5-1,2,4-(Me3C)3C5H2]2U═N(p-tolyl)(X) (X = N3 (20), I (22), PhS (23), and PhSe (24)), or is doubly oxidized by organic azides (RN3) and 9-diazofluorene, forming the uranium(VI) bis-imido metallocenes [η5-1,2,4-(Me3C)3C5H2]2U═N(p-tolyl)(=NR) (R = p-tolyl (18), mesityl (19)) and [η5-1,2,4-(Me3C)3C5H2]2U=N(p-tolyl)[=NN=(9-C13H8)] (21), respectively.

Synthesis and Structure of [η5-1,2,4-(Me3Si)3C5H2]2Th(bipy) and Its Reactivity toward Small Molecules

Halide exchange of (Cp3tms)2ThCl2 (1; Cp3tms = η5-1,2,4-(Me3Si)3C5H2) with Me3SiI furnishes (Cp3tms)2ThI2 (2), which is then reduced with potassium graphite (KC8) in the presence of 2,2'-bipyridine to give the thorium bipyridyl metallocene (Cp3tms)2Th(bipy) (3) in good yield. Complex 3 was fully characterized and readily reacted with various small molecules. For example, 3 may serve as a synthetic equivalent for the (Cp3tms)2Th(II) fragment when exposed to CuI, Ph2S2, organic azides, and CS2. Moreover, upon the addition of thiobenzophenone Ph2CS, p-methylbenzaldehyde (p-MeC6H4)CHO, benzophenone Ph2CO, amidate PhCONH(p-tolyl), seleno-ketone (p,p'-dimethoxy), selenobenzophenone (p-MeOPh)2CSe, di(p-tolyl)methanimine (p-tolyl)2C═NH, 1,2-di(benzylidene)hydrazine (PhCH═N)2, and nitriles PhCN, PhCH2CN, and Ph2CHCN C-C coupling results to give (Cp3tms)2Th[(bipy)(Ph2CS)] (8), (Cp3tms)2Th[(bipy)(p-MePhCHO)] (9), (Cp3tms)2Th[(bipy)(Ph2CO)] (10), (Cp3tms)2Th[(bipy){(p-tolylNH)(Ph)CO}] (11), (Cp3tms)2Th[(bipy){(p-MeOPh)2CSe}] (12), (Cp3tms)2Th[(bipy){(p-tolyl)2CNH}] (13), (Cp3tms)2Th[(bipy)(PhCHNN═CHPh)] (14), (Cp3tms)2Th[(bipy)(PhCN)] (16), (Cp3tms)2Th[(bipy)(PhCH2CN)] (17), and (Cp3tms)2Th[(bipy)(Ph2CHCN)] (18), respectively. However, when thiazole is added to 3, the dimeric sulfido complex [(Cp3tms)2Th]2[μ-(bipy)CH2NCHCHS]2 (15) can be isolated. Moreover, the addition of isonitriles such as Me3CNC and PhCH2NC to 3 results in C-N bond cleavage and C-C coupling processes to form the thorium isocyanido amido complexes (Cp3tms)2Th[4-(Me3C)bipy](NC) (19) and (Cp3tms)2Th[4-(PhCH2)bipy](NC) (20), respectively. Nevertheless, upon exposure of 3 to (trimethylsilyl)diazomethane Me3SiCHN2, the bis-amido complex (Cp3tms)2Th[5,6-(Me3SiCH)bipy] (21), concomitant with N2 release, is isolated.

Reactivity of a Lewis base-supported uranium terminal imido metallocene towards small molecules

The Lewis base-supported uranium terminal imido metallocene [η5-1,2,4-(Me3Si)3C5H2]2UN(p-tolyl)(dmap) (1) readily reacts with various small molecules such as internal alkynes, isothiocyanates, thioketones, amidates, organic nitriles and imines, chlorosilanes, copper iodide, diphenyl disulfide, organic azides and diazoalkane derivatives. For example, treatment of 1 with PhCCCCPh and PhNCS forms metallaheterocycles originating from a [2 + 2] cycloaddition to yield [η5-1-(p-tolyl)NC(Ph)CHCC(Ph)CH2Si(Me)2-2,4-(Me3Si)2C5H2][η5-1,2,4-(Me3Si)3C5H2]U (2) and [η5-1,2,4-(Me3Si)3C5H2]2U[N(p-tolyl)C(NPh)S](dmap) (3), respectively. The reaction of 1 with the thioketone Ph2CS forms the known uranium sulfido complex [η5-1,2,4-(Me3Si)3C5H2]2US(dmap) (4), which reacts with a second molecule of Ph2CS to give the disulfido compound [η5-1,2,4-(Me3Si)3C5H2]2U(S2CPh2) (5). The imido moiety also promotes deprotonation reactions as illustrated in the reactions with the amide PhCONH(p-tolyl), the nitrile PhCH2CN and the imine (p-tolyl)2CNH to form the bis-amidate [η5-1,2,4-(Me3Si)3C5H2]2U[OC(Ph)N(p-tolyl)]2 (7), and the iminato complexes [η5-1,2,4-(Me3Si)3C5H2]2U[N(p-tolyl)C(CH2Ph)NH](NCCHPh) (8) and [η5-1,2,4-(Me3Si)3C5H2]2U[NH(p-tolyl)][NC(p-tolyl)2] (9), respectively. Addition of PhSiH2Cl to 1 yields [η5-1,2,4-(Me3Si)3C5H2]2U(Cl)[N(p-tolyl)SiH2Ph] (10). In contrast, the uranium(V) imido complexes [η5-1,2,4-(Me3Si)3C5H2]2UN(p-tolyl)(I) (11) and [η5-1,2,4-(Me3Si)3C5H2]2UN(p-tolyl)(SPh) (12), may be isolated upon addition of CuI or Ph2S2 to 1, respectively. Uranium(VI) bis-imido metallocenes [η5-1,2,4-(Me3Si)3C5H2]2UN(p-tolyl)(NR) (R = p-tolyl (13), mesityl (14)) and [η5-1,2,4-(Me3Si)3C5H2]2UN(p-tolyl)[NN(9-C13H8)] (15) are accessible from 1 on exposure to RN3 (R = p-tolyl, mesityl) and 9-diazofluorene, respectively. Complexes 2, 3, 5, and 7-15 were characterized by various spectroscopic techniques and, in addition, compounds 2, 3, 5, and 7-13 were structurally authenticated by single-crystal X-ray diffraction analyses.

A Comprehensive Study Concerning the Synthesis, Structure, and Reactivity of Terminal Uranium Oxido, Sulfido, and Selenido Metallocenes

Terminal uranium oxido, sulfido, and selenido metallocenes were synthesized, and their reactivity was comprehensively studied. Heating of an equimolar mixture of [η⁵-1,2,4-(Me₃Si)₃C₅H₂]₂UMe₂ (2) and [η⁵-1,2,4-(Me₃Si)₃C₅H₂]₂U(NH-p-tolyl)₂ (3) in the presence of 4-dimethylaminopyridine (dmap) in refluxing toluene forms [η⁵-1,2,4-(Me₃Si)₃C₅H₂]₂U═N(p-tolyl)(dmap) (4), which is a useful precursor for the preparation of the terminal uranium oxido, sulfido, and selenido metallocenes [η⁵-1,2,4-(Me₃Si)₃C₅H₂]₂U═E(dmap) (E = O (5), S (6), Se (7)) employing a cycloaddition-elimination methodology with Ph₂C═E (E = O, S) or (p-MeOPh)₂CSe, respectively. Metallocenes 5-7 are inert toward alkynes, but they act as nucleophiles in the presence of alkylsilyl halides. The oxido and sulfido metallocenes 5 and 6 undergo [2 + 2] cycloadditions with isothiocyanate PhNCS or CS₂, while the selenido derivative 7 does not. The experimental studies are complemented by density functional theory (DFT) computations.

Regioselective C-H alkylation of anisoles with olefins by cationic imidazolin-2-iminato scandium(iii) alkyl complexes

A new type of rare-earth alkyl complexes supported by monoanionic imidazolin-2-iminato ligands were synthesised and structurally characterised by X-ray diffraction and NMR analyses. The utility of these imidazolin-2-iminato rare-earth alkyl complexes in organic synthesis was demonstrated by their performance in highly regioselective C-H alkylation of anisoles with olefins. With as low as 0.5 mol% catalyst loading, various anisole derivatives without ortho-substitution or 2-methyl substituted anisoles reacted with several alkenes under mild conditions, producing the corresponding ortho-Csp2-H and benzylic Csp3-H alkylation products in high yield (56 examples, 16-99% yields). Control experiments revealed that rare-earth ions, ancillary imidazolin-2-iminato ligands, and basic ligands were crucial for the above transformations. Based on deuterium-labelling experiments, reaction kinetic studies, and theoretical calculations, a possible catalytic cycle was provided to elucidate the reaction mechanism.

Phosphonium Ylides vs Iminophosphoranes: The Role of the Coordinating Ylidic Atom in cis-[Phosphine-Ylide Rh(CO)2] Complexes

The coordinating properties of two families of ylides, namely, phosphonium ylides and iminophosphoranes, differently substituted at the ylidic center (CH₂^- vs NiPr^-), have been investigated in structurally related cationic phosphine-ylide Rh(CO)₂ complexes obtained from readily available phosphine-phosphonium salt precursors derived from an ortho-phenylene bridge. However, while the Rh(CO)₂ complex bearing the P⁺-CH₂^- donor moiety proved to be stable, the P═NiPr donor end appeared to induce lability to one of the CO groups. All of the Rh^I carbonyl complexes in both ylide series were fully characterized, including through X-ray diffraction analysis. Based on the experimental and calculated infrared (IR) CO stretching frequencies in Rh(CO)₂ complexes, we evidenced that the phosphonium ylide ligand is a stronger donor than the iminophosphorane ligand. However, we also found that the difference in the intrinsic electronic properties can be largely compensated by the introduction of an iPr substituent on the N atom of the iminophosphorane, hence pointing to the noninnocent role of the peripheral substituent and opening novel possibilities to tune the properties of metal complexes containing ylide ligands.

Intrinsic reactivity of [η5-1,3-(Me3Si)2C5H3]2U(η4-C4Ph2) in small molecule activation

The uranium metallacyclocumulene, [η⁵-1,3-(Me₃Si)₂C₅H₃]₂U(η⁴-C₄Ph₂) (3) was isolated from the reaction mixture containing [η⁵-1,3-(Me₃Si)₂C₅H₃]₂UCl₂ (1), potassium graphite (KC₈) and 1,4-diphenylbutadiyne (PhCC-CCPh) in good yield. The reactivity of 3 towards various small organic molecules was evaluated. For example, while complex 3 shows no reactivity towards alkynes and 2,2'-bipyridine, it may deliver the [η⁵-1,3-(Me₃Si)₂C₅H₃]₂U(II) fragment in the presence of Ph₂E₂ (E = S, Se) and Ph₃CN₃, or react as a nucleophile in the presence of carbodiimides, isothiocyanates, aldehydes, ketones, and pyridine derivatives, forming five-, seven- or nine-membered heterometallacycles. On the contrary, addition of Ph₂CS to 3 induces CS bond cleavage yielding the dithiolate complex [η⁵-1,3-(Me₃Si)₂C₅H₃]₂U[S₂(C₁₂H₅Ph₅)] (14). In contrast, the closely related, but sterically more encumbered uranium metallacyclocumulene [η⁵-1,2,4-(Me₃Si)₃C₅H₂]₂U(η⁴-C₄Ph₂) (4) features a more limited reactivity which is restricted to mono- and double insertions with small unsaturated organic molecules such as isothiocyanates, ketones and nitriles.

Sc and Y bis(alkyl) complexes supported by bidentate and tridentate amidinate ligands. Synthesis, structure and catalytic activity in polymerization of isoprene and 1-heptene

A series of bis(alkyl) complexes {(tBu)C[N(2,6-Me₂C₆H₃)]₂}Ln(CH₂SiMe₃)₂(THF)_n (Ln = Y, n = 1 (1); Ln = Sc, n = 1 (2)), {2-[Ph₂P(O)]C₆H₄NC(tBu)N(2,6-Me₂C₆H₃)}Sc(CH₂SiMe₃)₂ (3), {2-[Ph₂P(NPh)]C₆H₄NC(tBu)N(2,6-Me₂C₆H₃)}Sc(CH₂SiMe₃)₂ (4) coordinated by bidentate (N,N) and tridentate (N,N,O; N,N,N) amidinate ligands are synthesized using an alkane elimination approach. Yttrium complex 1 demonstrated a half-life of ∼2.5 days at room temperature in benzene-D6 (C₆D₆) solution, whereas scandium complexes proved to be much more stable (25 d (2), 30 d (3) and 42 d (4)). Complexes 1-4 as a part of ternary catalytic systems 1-4/TB, HNB/AlR₃ (AlR₃ = AliBu₃, AliBu₂H; TB = [Ph₃C][B(C₆F₅)₄], HNB = [PhNHMe₂][B(C₆F₅)₄]) demonstrated high catalytic activity in isoprene polymerization and enable 80%-100% conversion of 1000 equivalents of monomer into polymer at 25 °C within 3-180 min. The isolated polyisoprenes feature predominantly cis-1,4-regularity (69.2%-87.3%) and polydispersities M_w/M_n = 2.26-8.92. Moreover, the binary (2/TB) and ternary (1-4/TB/10 AliBu₃) systems initiate 1-heptene polymerization providing 40%-100% conversion of 500 equivalents of monomer in 24 h at 25 °C giving polymer samples with M_n = 1.55-190.2 × 10³ and M_w/M_n = 1.55-3.87.

Small-Molecule Activation Mediated by [η5-1,3-(Me3Si)2C5H3]2U(bipy)

The uranium bipyridyl metallocene, [η⁵-1,3-(Me₃Si)₂C₅H₃]₂U(bipy) (2), is readily accessible in good yield by adding potassium graphite (KC₈) to a mixture of [η⁵-1,3-(Me₃Si)₂C₅H₃]₂UCl₂ (1) and 2,2'-bipyridine. Compound 2 was fully characterized and employed for small-molecule activation. It has been demonstrated that 2 may serve as a synthon for [η⁵-1,3-(Me₃Si)₂C₅H₃]₂U(II) fragment in the presence of Ph₂E₂ (E = S, Se), alkynes, and a variety of hetero-unsaturated molecules such as diazabutadienes, azine (Ph₂C═N)₂, o-benzoquinone, pyridine N-oxide, CS₂, isothiocyanates, and organic azides. However, upon exposure of 2 to thio-ketone Ph₂CS, aldehyde p-MePhCHO, ketone Ph₂CO, imine PhCH═NPh, azine (PhCH═N)₂, and nitrile PhCN, it may also promote C-C coupling reactions forming [η⁵-1,3-(Me₃Si)₂C₅H₃]₂U[(bipy)(Ph₂CS)] (16), [η⁵-1,3-(Me₃Si)₂C₅H₃]₂U[(bipy)(p-MePhCHO)] (17), [η⁵-1,3-(Me₃Si)₂C₅H₃]₂U[(bipy)(Ph₂CO)] (18), [η⁵-1,3-(Me₃Si)₂C₅H₃]₂U[(bipy)(PhCHNPh)] (19), [η⁵-1,3-(Me₃Si)₂C₅H₃]₂U[(bipy)(PhCHNN═CHPh)] (20), and [η⁵-1,3-(Me₃Si)₂C₅H₃]₂U[(N₂C₁₀H₇C(Ph)NH)] (22), respectively, in quantitative conversion. Furthermore, in the presence of CuI, a single-electron transfer (SET) process is observed to yield the uranium(III) iodide complex [η⁵-1,3-(Me₃Si)₂C₅H₃]₂U(I)(bipy) (15).

Looking deep into C-H functionalization: the synthesis and application of cyclopentadienyl and related metal catalysts

Metal catalyzed C-H functionalization offers a versatile platform for methodology development and a wide variety of reactions now exist for the chemo- and site-selective functionalization of organic molecules. Cyclopentadienyl-metal (CpM) complexes of transition metals and their correlative analogues have found widespread application in this area, and herein we highlight several key applications of commonly used transition-metal Cp-type catalysts. In addition, an understanding of transition metal Cp-type catalyst synthesis is important, particularly where modifications to the catalyst structure are required for different applications, and a summary of this aspect is given.

Reactivity of Mixed Methyl-Aminobenzyl Guanidinate Lutetium Complex towards iPrN=C=NiPr, CS2 and Ph2PH

A heteroleptic terminal alkyl lutetium complex stabilized by a bulky guanidinato ligand, LLu(CH2C6H4NMe2-o)(Me)(THF) (1) (L = (PhCH2)2NC(NC6H3iPr2-2,6)2) has been synthesized by treatment of LLu(CH2C6H4NMe2-o)2 with AlMe3 (1 equiv) via an...

Recent progress in rare-earth metal-catalyzed sp2 and sp3 C–H functionalization to construct C–C and C–heteroelement bonds

The review presents rare-earth metal-catalyzed C(sp2/sp3)–H functionalization accessing C–C/C–heteroatom bonds and olefin (co)polymerization, highlighting substrate scope, mechanistic realization, and origin of site-, enantio-/diastereo-selectivity.

Synthesis and reactivity of the uranium phosphinidene metallocene [η5-1,3-(Me3Si)2C5H3]2U([double bond, length as m-dash]P-2,4,6-iPr3C6H2)(OPMe3): influence of the coordinated Lewis base

This paper describes the synthesis and reactivity of [η5-1,3-(Me3Si)2C5H3]2U([double bond, length as m-dash]P-2,4,6-iPr3C6H2)(OPMe3) (6) which is accessible from a ligand exchange reaction between [η5-1,3-(Me3Si)2C5H3]2U([double bond, length as m-dash]P-2,4,6-iPr3C6H2)(OPPh3) (2) and Me3PO at ambient temperature. Phosphinidene 6 exhibits no reactivity towards internal alkynes, but readily reacts with various hetero-unsaturated molecules such as isothiocyanates, aldehydes, nitriles, isonitriles, and organic azides, forming uranium sulfido, oxido, imido, and uranaheterocyclic compounds. Nevertheless, with the bidentate ortho-dicyanobenzene o-C6H4(CN)2 the zwitterionic species [η5-1,3-(Me3Si)2C5H3]2U[NHC(N){C6H4CP(2,4,6-iPr3C6H2)CH2PMe2O}] (13) is isolated in good yield. Moreover, 6 converts with Ph2S2 to the uranium(iii) phenylthiolate compound [η5-1,3-(Me3Si)2C5H3]2USPh(OPMe3) (7) in good isolated yield. Furthermore, the influence of the Lewis base on the reactivity of the uranium phosphinidene metallocenes has also been evaluated.

Uranium versus Thorium: Synthesis and Reactivity of [η5 -1,2,4-(Me3 C)3 C5 H2 ]2 U[η2 -C2 Ph2 ]

The synthesis, electronic structure, and reactivity of a uranium metallacyclopropene were comprehensively studied. Addition of diphenylacetylene (PhC≡CPh) to the uranium phosphinidene metallocene [η5 -1,2,4-(Me3 C)3 C5 H2 ]2 U=P-2,4,6-tBu3 C6 H2 (1) yields the stable uranium metallacyclopropene, [η5 -1,2,4-(Me3 C)3 C5 H2 ]2 U[η2 -C2 Ph2 ] (2). Based on density functional theory (DFT) results the 5f orbital contributions to the bonding within the metallacyclopropene U-(η2 -C=C) moiety increases significantly compared to the related ThIV compound [η5 -1,2,4-(Me3 C)3 C5 H2 ]2 Th[η2 -C2 Ph2 ], which also results in more covalent bonds between the [η5 -1,2,4-(Me3 C)3 C5 H2 ]2 U2+ and [η2 -C2 Ph2 ]2- fragments. Although the thorium and uranium complexes are structurally closely related, different reaction patterns are therefore observed. For example, 2 reacts as a masked synthon for the low-valent uranium(II) metallocene [η5 -1,2,4-(Me3 C)3 C5 H2 ]2 UII when reacted with Ph2 E2 (E=S, Se), alkynes and a variety of hetero-unsaturated molecules such as imines, ketazine, bipy, nitriles, organic azides, and azo derivatives. In contrast, five-membered metallaheterocycles are accessible when 2 is treated with isothiocyanate, aldehydes, and ketones.

Electron-deficient boron-based catalysts for C-H bond functionalisation

In contrast to transition metal-catalysed C-H functionalisation, highly efficient construction of C-C and C-X (X = N, O, S, B, Si, etc.) bonds through metal-free catalytic C-H functionalisation remains one of the most challenging tasks for synthetic chemists. In recent years, electron-deficient boron-based catalyst systems have exhibited great potential for C-H bond transformations. Such emerging systems may greatly enrich the chemistry of C-H functionalisation and main-group element catalysis, and will also provide enormous opportunities in synthetic chemistry, materials chemistry, and chemical biology. This article aims to give a timely comprehensive overview to recognise the current status of electron-deficient boron-based catalysis in C-H functionalisation and stimulate the development of more efficient catalytic systems.

Ln(ii) alkyl complexes: from elusive exotics to catalytic applications

The synthesis, structures and reactivity of isolable Ln^II (Ln = Sm, Eu, Yb) alkyl complexes are discussed. The application of Ln^II alkyl derivatives in a variety of catalytic reactions is considered as well.

Reactivity studies involving a Lewis base supported terminal uranium phosphinidene metallocene [η5-1,3-(Me3C)2C5H3]2U(P-2,4,6-iPr3C6H2)(OPMe3)

Small variations in the phosphinidene substituents, but significant change the reactivity of the uranium phosphinidene complexes.

Enantiomerically Pure Constrained Geometry Complexes of the Rare-Earth Metals Featuring a Dianionic N-Donor Functionalised Pentadienyl Ligand: Synthesis and Characterisation

We report the preparation of enantiomerically pure constrained geometry complexes (cgc) of the rare-earth metals bearing a pentadienyl moiety (pdl) derived from the natural product (1R)-(-)-myrtenal. The potassium salt 1, [Kpdl*], was treated with ClSiMe₂ NHtBu, and the resulting pentadiene 2 was deprotonated with the Schlosser-type base KOtPen/nBuLi (tPen=CMe₂ (CH₂ Me)) to yield the dipotassium salt [K₂ (pdl*SiMe₂ NtBu)] (3). However, 3 rearranges in THF solution to its isomer 3' by a 1,3-H shift, which elongates the bridge between the pdl and SiMe₂ NtBu moieties by one CH₂ unit. This is crucial for the successful formation of various monomeric C₁ - or dimeric C₂ -symmetric rare-earth cgc complexes with additional halide, tetraborohydride, amido and alkyl functionalities. All compounds have been extensively characterised by solid-state X-ray diffraction analysis, solution NMR spectroscopy and elemental analyses.

Experimental and Computational Studies on a Base-Free Terminal Uranium Phosphinidene Metallocene

The first stable base‐free terminal uranium phosphinidene metallocene is presented; and its structure and reactivity have been studied in detail and compared to that of the corresponding thorium derivative. Salt metathesis reaction of the methyl iodide uranium metallocene Cp’’’₂U(I)Me (2, Cp’’’=η⁵‐1,2,4‐(Me₃C)₃C₅H₂) with Mes*PHK (Mes*=2,4,6‐(Me₃C)₃C₆H₂) in THF yields the base‐free terminal uranium phosphinidene metallocene, Cp’’’₂U=PMes* (3). In addition, density functional theory (DFT) studies suggest substantial 5f orbital contributions to the bonding within the uranium phosphinidene [U]=PAr moiety, which results in a more covalent bonding between the [Cp’’’₂U]²⁺ and [Mes*P]²⁻ fragments than that for the related thorium derivative. This difference in bonding besides steric reasons causes different reactivity patterns for both molecules. Therefore, the uranium derivative 3 may act as a Cp’’’₂U(II) synthon releasing the phosphinidene moiety (Mes*P:) when treated with alkynes or a variety of hetero‐unsaturated molecules such as imines, thiazoles, ketazines, bipy, organic azides, diazene derivatives, ketones, and carbodiimides.

Incorporation of Boron into Uranium Metallacycles: Synthesis, Structure, and Reactivity of Boron-Containing Uranacycles Derived from Bis(alkynyl)boranes

The reaction of uranacyclopropene complex (C₅ Me₅ )₂ U[η² -1,2-C₂ (SiMe₃ )₂ ] with B-aryl bis(alkynyl)borane PhB(C≡CPh)₂ led to the first six-membered uranium metallaboracycle, while the reaction with B-amino bis(alkynyl)borane (Me₃ Si)₂ NB(C≡CPh)₂ afforded an unexpected uranaborabicyclo[2.2.0] complex via [2+2] cycloaddition. The reaction with CuCl revealed the non-innocent property of the rearranged bis(alkynyl)boron species towards oxidant. The reactions with isocyanide DippNC: (Dipp=2,6-iPr₂ -C₆ H₃ ) and isocyanate tBuNCO afforded the novel uranaborabicyclo[3.2.0] complexes. All new complexes have been structurally characterized. DFT calculations were performed to provide more insights into the electronic structures and the reaction mechanism.

Recent advances in the synthesis of bridgehead (or ring-junction) nitrogen heterocycles via transition metal-catalyzed C–H bond activation and functionalization

An update on recent advances in the synthesis of bridgehead nitrogen fused heterocycles via transition metal-catalyzed C–H activation and functionalization is reported.

Ln(ii) and Ca(ii) NCsp3N pincer type diarylmethanido complexes – promising catalysts for C–C and C–E (E = Si, P, N, S) bond formation

The first examples of Ln(ii) (Ln = Yb, Sm) and Ca [NC_sp3N] pincer type diarylmethanido complexes were synthesized and successfully used as efficient and selective precatalyst for intermolecular C–C and C–E bond formation.

Bis(alkyl) scandium and yttrium complexes coordinated by an amidopyridinate ligand: synthesis, characterization and catalytic performance in isoprene polymerization, hydroelementation and carbon dioxide hydrosilylation

Highly versatile and robust organolanthanides as catalysts or catalyst precursors for a variety of challenging transformations.

Experimental and computational studies on a three-membered diphosphido thorium metallaheterocycle [η5-1,3-(Me3C)2C5H3]2Th[η2-P2(2,4,6-iPr3C6H2)2]

A three-membered diphosphido thorium metallaheterocycle complex was prepared and its reactivity was investigated.

A base-free terminal thorium phosphinidene metallocene and its reactivity toward selected organic molecules

Small molecule activation mediated by a base-free terminal phosphinidene thorium metallocene is reported.

3d Transition Metals for C-H Activation

C-H activation has surfaced as an increasingly powerful tool for molecular sciences, with notable applications to material sciences, crop protection, drug discovery, and pharmaceutical industries, among others. Despite major advances, the vast majority of these C-H functionalizations required precious 4d or 5d transition metal catalysts. Given the cost-effective and sustainable nature of earth-abundant first row transition metals, the development of less toxic, inexpensive 3d metal catalysts for C-H activation has gained considerable recent momentum as a significantly more environmentally-benign and economically-attractive alternative. Herein, we provide a comprehensive overview on first row transition metal catalysts for C-H activation until summer 2018.