Electrochemical immunosensor for the detection of colistin in chicken liver

An innovative amperometric immunosensor has been developed to detect antibiotic colistin from the chicken liver. Colistin is a antibacterial peptide that has been barred for human consumption, but it is being commonly used as a veterinary drug, and as a feed additive for livestock. In the present work, an immunosensor was developed by immobilizing an anti-colistin Ab onto the CNF/AuNPs surface of the screen-printed electrode. The sensor records electrochemical response in the chicken liver spiked with colistin with CV. Additionally, the characterization of electrode surface was done with FE-SEM, FTIR, and EIS at each step of fabrication. The lower LOD was 0.89 μgKg-1, with a R 2 of 0.901 using CV. Further validation of the immunosensor was conducted using commercial chicken liver samples, by comparing the results to those obtained using traditional methods. The fabricated immunosensor showed high specificity towards colistin, which remained stable for 6 months but with a 13% loss in the initial CV current.

AuNPs/CNF-modified DNA biosensor for early and quick detection of O. tsutsugamushi in patients suffering from scrub typhus

A novel approach has been developed for the detection of 56 kDa tissue-specific antigen (TSA) gene of Orientia tsutsugamushi a causative agent of scrub typhus disease. The approach was developed by immobilization of 5' NH2 labeled ssDNA probe selective to 56 kDa TSA gene, to the surface of AuNPs/CNF modified screen-printed electrode. An electrochemical response was recorded with single stranded genomic DNA (ssDNA) of O. tsutsugamushi isolated from patient sample, using cyclic voltammetry and electrochemical impedance spectroscopy. The electrode surface was characterized by Field-Emission Scanning electron microscope (FE-SEM), Fourier Transform Infrared Spectroscopy (FTIR) and Raman Spectroscopy at each step of fabrication. The DNA biosensor shows optimum response within 50-60 s at room temperature (25 ± 3 °C). The sensor shows higher sensitivity [7849 (µA/cm²)/ng DNA], fast response time (60 s), wider linear range (0.04-2.6 ng) with limit of detection of 0.02 ng/µl of ssDNA sample.

Copper nanoparticles decorated polyaniline–zeolite nanocomposite for the nanomolar simultaneous detection of hydrazine and phenylhydrazine

The high electrocatalytic activity of the CuNPs–PANI–Nano-ZSM-5 nanocomposite can be attributed to the synergistic contribution provided by the highly dispersed copper nanoparticles and conductive PANI film on high surface area Nano-ZSM-5.

Spectrophotometric determination of pico-molar level of hydrazine by using Alizarin red in water and urine samples

In this paper, very simple and rapid sensor has been developed for the spectrophotometric determination of pico-molar level of hydrazine using Alizarin red. There was a decrease of optical intensity of the probe in the presence of hydrazine. The LOD is calculated from the linear graph between 5-100 pM as 0.66 pM of hydrazine which is well below the risk level proposed by Agency for Toxic Substance and Disease Registry. The probe selectivity for the detection of hydrazine was tested in the presence of commonly encountered metal ions and anions. The calibration curves showed good linearity for working ranges from 5-100 pM and 0.5-40 mM respectively, with R(2)=0.9911 and 0.9744, indicate the validity of the Beer-Lambert law. The binding constant and the free energy change values are determined by the Benesi-Hildebrand method. Determination of hydrazine in environmental water and human urine samples are successfully performed by the proposed method with the recovery of 100%.

Facile preparation of Ni(OH)2-MnO2 hybrid material and its application in the electrocatalytic oxidation of hydrazine

A surfactant-free synthetic methodology is reported for the preparation of Ni(OH)2-MnO2 hybrid nanostructures. For comparative study, MnO2 and Ni(OH)2 were also synthesized. Materials were characterized by X-ray diffraction, nitrogen sorption, scanning electron microscopy, and transmission electron microscopy. Ni(OH)2-MnO2 modified electrode is fabricated for the determination of hydrazine. The electrochemical oxidation of hydrazine was investigated using cyclic, linear sweep voltammetries, and chronoamperometry methods. The Ni(OH)2-MnO2 modified electrode showed hydrazine oxidation with decrease in the over voltage and increase in the oxidation peak current, when compared to MnO2, Ni(OH)2, and bare GCE. pH was optimized to obtain the best peak potential and current sensitivity. Chronoamperometry was used to estimate the diffusion coefficient of hydrazine. The kinetic parameters such as overall number of electrons involved in the catalytic oxidation of hydrazine and the rate constant (k) for the oxidation of hydrazine at Ni(OH)2-MnO2 modified electrode were determined. The Ni(OH)2-MnO2 modified electrode exhibited good sensitivity, stability, and reproducibility in hydrazine sensing.