Systematic Raman spectroscopic study of the complexation of uranyl with fluoride

A simple aqueous complexing system of UO22+ with F- is selected to systematically illustrate the application of Raman spectroscopy in exploring uranyl(VI) chemistry. Five successive complexes, UO2F+, UO2F2(aq), UO2F3-, UO2F42-, and UO2F53-, are identified, as well as the formation constants except for the 1 : 5 species UO2F53-, which was experimentally observed here for the first time. The standard relative molar Raman scattering intensity for each species is obtained by deconvolution of the spectra collected during titrations. The results of relativistic quantum chemical first-principles and ab initio calculations are presented for the complete set of [UO2(H2O)mFn]2-n complexes (n = 0-5), both for the gas phase as well as for aqueous solution modelling bulk water using the conductor-like screening model. Electronic structure calculations at the Møller-Plesset second-order perturbation theory level provide accurate geometrical parameters and in particular reveal that k water molecules in the second coordination sphere coordinating to the F- ligands in the resulting [UO2(H2O)mFn]2-n(H2O)k complexes need to be treated explicitly in order to obtain vibrational frequencies in very good agreement with experimental data. The thermodynamics and structural information obtained in this work and the developed methodology could be instructive for the future experimental and computational research on the complexation of the uranyl ion.

A molecular extraction process for vanadium based on tandem selective complexation and precipitation

Recycling vanadium from alternative sources is essential due to its expanding demand, depletion in natural sources, and environmental issues with terrestrial mining. Here, we present a complexation-precipitation method to selectively recover pentavalent vanadium ions, V(V), from complex metal ion mixtures, using an acid-stable metal binding agent, the cyclic imidedioxime, naphthalimidedioxime (H2CIDIII). H2CIDIII showed high extraction capacity and fast binding towards V(V) with crystal structures showing a 1:1 M:L dimer, [V2(O)3(C12H6N3O2)2]2-, 1, and 1:2 M:L non-oxido, [V(C12H6N3O2)2] ̶ complex, 2. Complexation selectivity studies showed only 1 and 2 were anionic, allowing facile separation of the V(V) complexes by pH-controlled precipitation, removing the need for solid support. The tandem complexation-precipitation technique achieved high recovery selectivity for V(V) with a selectivity coefficient above 3 × 105 from synthetic mixed metal solutions and real oil sand tailings. Zebrafish toxicity assay confirmed the non-toxicity of 1 and 2, highlighting H2CIDIII's potential for practical and large-scale V(V) recovery.

Uranyl uptake into metal-organic frameworks: a detailed X-ray structural analysis

Metal-organic frameworks (MOF) are a subclass of porous framework materials that have been used for a wide variety of applications in sensing, catalysis, and remediation. Among these myriad applications is their remarkable ability to capture substances in a variety of environments ranging from benign to extreme. Among the most common and problematic substances found throughout the world's oceans and water supplies is [UO2]2+, a common mobile ion of uranium, which is found both naturally and as a result of anthropogenic activities, leading to problematic environmental contamination. While some MOFs possess high capability for the uptake of [UO2]2+, many more of the thousands of MOFs and their modifications that have been produced over the years have yet to be studied for their ability to uptake [UO2]2+. However, studying the thousands of MOFs and their modifications presents an incredibly difficult task. As such, a way to narrow down the numbers seems imperative. Herein, we evaluate the binding behaviors as well as identify the specific binding sites of [UO2]2+ incorporated into six different Zr MOFs to elucidate specific features that improve [UO2]2+ uptake. In doing so, we also present a method for the determination and verification of these binding sites by Anomalous wide-angle X-ray scattering, X-ray fluorescence, and X-ray absorption spectroscopy. This research not only presents a way for future research into the uptake of [UO2]2+ into MOFs to be conducted but also a means to evaluate MOFs more generally for the uptake of other compounds to be applied for environmental remediation and improvement of ecosystems globally.

Enhanced uranium extraction from seawater: from the viewpoint of kinetics and thermodynamics

Uranium extraction from seawater (UES) is recognized as one of the seven pivotal chemical separations with the potential to revolutionize global paradigms. The forthcoming decade is anticipated to witness a surge in UES, driven by escalating energy demands. The oceanic reservoirs, possessing uranium quantities approximately 1000-fold higher than terrestrial mines, present a more sustainable and environmentally benign alternative. Empirical evidence from historical research indicates that adsorption emerges as the most efficacious process for uranium recovery from seawater, considering operational feasibility, cost-effectiveness, and selectivity. Over the years, scientific exploration has led to the development of a plethora of adsorbents with superior adsorption capacity. It would be efficient to design materials with a deep understanding of the adsorption from the perspective of kinetics and thermodynamics. Here, we summarize recent advancements in UES technology and the contemporary challenges encountered in this domain. Furthermore, we present our perspectives on the future trajectory of UES and finally offer our insights into this subject.

Recent developments and challenges in uranium extraction from seawater through amidoxime-functionalized adsorbents

As per statistical estimations, we have only around 100 years of uranium life in terrestrial ores. In contrast, seawater has viable uranium resources that can secure the future of energy. However, to achieve this, environmental challenges need to be overcome, such as low uranium concentration (3.3 ppb), fouling of adsorbents, uranium speciation, oceanic temperature, and competition between elements for the active site of adsorbent (such as vanadium which has a significant influence on uranium adsorption). Furthermore, the deployability of adsorbent under seawater conditions is a gigantic challenge; hence, leaching-resistant stable adsorbents with good reusability and high elution rates are extremely needed. Powdered (nanostructured) adsorbents available today have limitations in fulfilling these requirements. An increase in the grafting density of functional ligands keeping in view economic sustainability is also a major obstacle but a necessity for high uranium uptake. To cope with these challenges, researchers reported hundreds of adsorbents of different kinds, but amidoxime-based polymeric adsorbents have shown some remarkable advantages and are considered the benchmark in uranium extraction history; they have a high affinity for uranium because of electron donors in their structure, and their amphoteric nature is responsible for effective uranium chelation under a wide range of pH. In this review, we have mainly focused on recent developments in uranium extraction from seawater through amidoxime-based adsorbents, their comparative analysis, and problematic factors that are needed to be considered for future research.

How does chemistry contribute to circular economy in nuclear energy systems to make them more sustainable and ecological?

While one should be aware that its zero CO₂ emission is actually achievable only when electric power is generated, nuclear power is one of the most viable and proven "carbon-free" energy sources to provide baseload electricity to the current energy-demanding society. Even after the power generation, the major part of spent nuclear fuels still consists of recyclable nuclear fuel materials such as U and Pu, promising circular economy of nuclear energy systems in principle. However, actual situations are not very simple due to the following issues: (1) resource security of nuclear fuel materials, (2) issues of depleted uranium, and (3) treatment and disposal of high-level radioactive wastes. In this Perspective, I discussed how chemistry can contribute to resolving these problems and what task academic research in fundamental chemistry should take on there.

Reactivity of a di(amidoxime) ligand in the presence of Cu(II)/Ni(II)

As the primary functional groups of amidoxime sorbents for uranium recovery from seawater, di(amidoxime) ligands can be cyclized in situ into different ligands in the presence of Cu(II)/Ni(II) at different pH values. Here we first found that a linear ligand glutardiamidoxime can be catalyzed into a cyclic ligand glutarimidedioxime by Ni(II) in acidic solution.

Two Ligands of Interest in Recovering Uranium from the Oceans: The Correct Formation Constants of the Uranyl(VI) Cation with 2,2'-Bipyridyl-6,6'-dicarboxylic Acid and 1,10-Phenanthroline-2,9-dicarboxylic Acid

The ligands BDA (2,2'-bipyridyl-6,6'-dicarboxylic acid) and PDA (1,10-phenanthroline-2,9-dicarboxylic acid) are of interest as functional group types for ion-exchange materials for extracting uranium from the oceans, reported in a previous paper for PDA Lashley, M. A. ( Inorg. Chem. 2016 55 10818 10829). Yang, Y. ( Inorg. Chem. 2019, 58, 6064 6074) have published what they claim to be a more accurate result for the formation of the UO₂²⁺/PDA complex of log K₁ = 22.84 compared with our reported value of log K₁ = 16.5, as well as log K₁ = 21.52 for the BDA complex. The determination of log K₁ for the PDA and BDA complexes with the UO₂²⁺ cation was carried out by Yang et al. using a competition reaction between DTPA (diethylenetriamine pentaacetic acid) and BDA or PDA, monitoring the absorbance due to the BDA and PDA ligands. This competition method using absorbance versus pH titrations was developed for determining the formation constants of the complexes of several polypyridyl ligands plus PDA complexes of metal ions, which were too stable for log K determination by competition with protons. A key feature of such titrations is that in the competition reaction, the displacement of the pyridyl donor ligand (e.g., PDA) by the competing ligand (e.g., DTPA), the absorbance spectrum of the displaced pyridyl donor ligand should be observed. Competing ligands used to date have been EDTA (ethylenediamine tetraacetic acid), DTPA, or the hydroxide ion. In the study of Yang et al., no such displaced PDA or BDA was apparent in the absorbance spectra in their titrations so that their reported log K₁ values have no validity. Their log K₁ values are so much higher than log K₁ for the uranyl DTPA complex (∼13.6) that DTPA could not possibly displace BDA or PDA from the uranyl cation, and a competition reaction could not possibly occur. We report the correct value of log K₁ = 15.4 (ionic strength = zero) for the uranyl BDA complex, to illustrate the correct determination of such a constant by a competition reaction between BDA and hydroxide, showing how the characteristic absorbance spectrum for a BDA complex, here the UO₂²⁺ complex, disappears, and the distinctive absorbance spectrum of the free nonprotonated BDA ligand appears as the pH is increased, and BDA is displaced by the hydroxide ion.

Fully Chelating N3O2-Pentadentate Planar Ligands Designed for the Strongest and Selective Capture of Uranium from Seawater

Based on the unique fivefold equatorial coordination of UO₂²⁺, water-compatible pentadentate planar ligands, H₂saldian and its derivatives, were designed for the strong and selective capture of UO₂²⁺ in seawater. In the simulated seawater condition (0.5 M NaCl + 2.3 mM HCO₃^-/CO₃^2-, pH 8), saldian^2- shows the strongest complexation with UO₂²⁺ to form UO₂(saldian) (log β₁₁ = 28.05 ± 0.07), which is more than 10 order of magnitude greater than amidoxime-based or -inspired ligand systems most commonly employed for U capture from seawater. Good selectivity for UO₂²⁺ from other metal ions coexisting in seawater was also demonstrated.

Stable Chelation of the Uranyl Ion by Acyclic Hexadentate Ligands: Potential Applications for 230U Targeted α-Therapy

Uranium-230 is an α-emitting radionuclide with favorable properties for use in targeted α-therapy (TAT), a type of nuclear medicine that harnesses α particles to eradicate cancer cells. To successfully implement this radionuclide for TAT, a bifunctional chelator that can stably bind uranium in vivo is required. To address this need, we investigated the acyclic ligands H₂dedpa, H₂CHXdedpa, H₂hox, and H₂CHXhox as uranium chelators. The stability constants of these ligands with UO₂²⁺ were measured via spectrophotometric titrations, revealing log β_ML values that are greater than 18 and 26 for the "pa" and "hox" chelators, respectively, signifying that the resulting complexes are exceedingly stable. In addition, the UO₂²⁺ complexes were structurally characterized by NMR spectroscopy and X-ray crystallography. Crystallographic studies reveal that all six donor atoms of the four ligands span the equatorial plane of the UO₂²⁺ ion, giving rise to coordinatively saturated complexes that exclude solvent molecules. To further understand the enhanced thermodynamic stabilities of the "hox" chelators over the "pa" chelators, density functional theory (DFT) calculations were employed. The use of the quantum theory of atoms in molecules revealed that the extent of covalency between all four ligands and UO₂²⁺ was similar. Analysis of the DFT-computed ligand strain energy suggested that this factor was the major driving force for the higher thermodynamic stability of the "hox" ligands. To assess the suitability of these ligands for use with ²³⁰U TAT in vivo, their kinetic stabilities were probed by challenging the UO₂²⁺ complexes with the bone model hydroxyapatite (HAP) and human plasma. All four complexes were >95% stable in human plasma for 14 days, whereas in the presence of HAP, only the complexes of H₂CHXdedpa and H₂hox remained >80% intact over the same period. As a final validation of the suitability of these ligands for radiotherapy applications, the in vivo biodistribution of their UO₂²⁺ complexes was determined in mice in comparison to unchelated [UO₂(NO₃)₂]. In contrast to [UO₂(NO₃)₂], which displays significant bone uptake, all four ligand complexes do not accumulate in the skeletal system, indicating that they remain stable in vivo. Collectively, these studies suggest that the equatorial-spanning ligands H₂dedpa, H₂CHXdedpa, H₂hox, and H₂CHXhox are highly promising candidates for use in ²³⁰U TAT.

Theoretical Insights on Improving Amidoxime Selectivity for Potential Uranium Extraction from Seawater

Extraction of uranium from seawater is one of the important ways to solve the shortage of terrestrial uranium resources. Thereinto, the competition between uranyl and vanadium cations is a significant challenge in the commonly used amidoxime-based adsorbents for extracting uranium from seawater. An in-depth understanding of the extraction behaviors of modified amidoxime groups with uranyl and vanadium ions is one of the effective means to design and develop efficient adsorbents for selective uranium sequestration. In this work, we have designed and systematically investigated the alkyl and amino functionalized amidoxime, (Z)-2-amino-N'-hydroxy-N,N-dimethylbenzimidamide (L¹), and its phenyl and methoxy derivatives ((Z)-3-amino-N'-hydroxy-N,N-dimethyl-2-naphthimidamide (L²) and (Z)-2-amino-N'-hydroxy-4-methoxy-N,N-dimethylbenzimidamide (L³)) by quantum chemistry calculations. In the uranyl complexes, the amidoxime groups prefer to act as η²-coordinated ligands as the amidoximes increase, and there exist substantial hydrogen bond interactions, which are different from the vanadium complexes. Various bonding analyses show that the L¹ ligand possesses a stronger binding affinity to UO₂²⁺, and the -C₆H₅ and -CH₃O substituent groups seem to have no effect on the improvement of extraction ability. Thermodynamic analysis confirms that the L¹ ligand has a stronger extraction capability to uranyl ion compared to L² and L³. According to the calculations of the vanadium (V) (VO₂⁺ and VO³⁺) complexes with the L¹ ligand, L¹ is more likely to react with [H₂VO₄]^- and [HVO₄]^2- to form VO₂⁺ complexes. Expectantly, thermodynamic analysis displays a higher extraction capacity for uranyl ions than vanadium ions. Therefore, these alkyl and amino functionalized amidoxime ligands demonstrate high selectivity for uranyl over vanadium ions, which is mainly due to the coordination mode changes of these ligands toward vanadium in conjunction with the considerable hydrogen bonds in the uranyl complexes. These results are expected to afford useful clues for the design of efficient adsorbents for uranium extraction from seawater.

Acid/base responsive assembly/dis-assembly of a family of zirconium(IV) clusters with a cyclic imide-dioxime ligand

The hydrolytically stable dioxime ligand (2Z-6Z)-piperidine-2,6-dione (H₃pidiox) acts as a strong chelator mainly with hard metals in high oxidation states, a pre-requisite for potential applications in metal sequestering processes from aqueous solutions. Reaction of ZrCl₄ with H₃pidiox in methanol gives the mononuclear compound [Zr^IV(η¹,η¹,η²-H₂pidiox-O,N,O')₂(OH₂)₂]Cl₂·H₂O·CH₃OH (1), while the same reaction mixture in the presence of KOH gave the pentanuclear ZrOC [ZrIV5(μ₂-OH)₄(OH₂)₄(μ₂-η¹,η¹,η²-Hpidiox-O,N,O')₄(η¹,η¹,η¹-HpidioxO,N,O')₄]·5KCl·3CH₃OH·8H₂O (2). Compound 1 is formed at very acidic pH = 0, and the pentanuclear ZrOC 2 at higher pH values (pH = 2). Compounds 1 and 2 were characterized by single crystal X-ray structure analysis, multi-nuclear NMR spectroscopy and ESI-MS spectrometry. The single crystal X-ray structure analysis of 1 revealed a mononuclear zirconium(IV) compound containing an eight-coordinate zirconium atom bound to two singly deprotonated H₂pidiox^- ligands and two water molecules in a severely distorted bicapped octahedral geometry. The pentanuclear ZrOC 2 constitutes the second example of a Zr₅ cluster to be reported and the first one in which the four zirconium atoms are arranged in a tetrahedral arrangement with the fifth occupying the center of the tetrahedron. 1D and 2D NMR spectroscopies of the acidic CD₃OD solutions of complex 1 reveal a fast equilibrium between 1 and 2. Addition of KOH into a CH₃OH solution of 2 results in the controlled fast transformation of 2 to an asymmetric hexanuclear ZrOC 3 as evidenced by the NMR and real-time ESI-MS solution studies. Further addition of KOH to the solution of 3 leads to the ZrOC 4, and on the basis of NMR and ESI-MS data and in comparison with the known hexanuclear titanium(IV)/H₃pidiox cluster, it is concluded that the cluster 4 should have a hexanuclear structure. Electrospray ionization mass spectrometry (ESI-MS) demonstrated not only the structural stability 1 and 2 in solution, but also revealed the reversible pH driven dis-assembly/re-assembly process between the monomeric 1 and the pentanuclear ZrOC 2.

Complexation of uranyl(vi) with succinimidedioxime in comparison with glutarimidedioxime

Glutarimidedioxime favors 1 : 2 neutral uranyl complex species, whereas succinimidedioxime tends to form a cross-linked 2 : 2 binuclear complex with uranyl ions.

Theoretical insights into the possible applications of amidoxime-based adsorbents in neptunium and plutonium separation

Efficient separation of neptunium and plutonium from spent nuclear fuel is essential for advanced nuclear fuel cycles. At present, the development of effective actinide separation ligands has become a top priority. As common adsorbents for extracting uranium from seawater, amidoxime-based adsorbents may also be able to separate actinides from high-level liquid waste (HLLW). In this work, the complexation of Np(IV,V,VI) and Pu(IV) and alkyl chains (R = C₁₃H₂₆) modified with amidoximate (AO^-) and carboxyl (Ac^-) functional groups was systematically studied by quantum chemical calculations. For all the studied complexing species, the RAc^- and RAO^- ligands act as monodentate or bidentate ligands. Complexes with AO^- groups show higher covalency of the metal-ligand bonding than the analogues with Ac^- groups, in line with the binding energy analysis. Bonding analysis verifies that these amidoxime/carboxyl-based adsorbents possess higher coordination affinity toward Pu(IV) than toward Np(IV), and the Np(VI) complexes have stronger covalent interactions than Np(V). According to thermodynamic analysis, these adsorbents have the ability to separate Np(IV,V,VI) and Pu(IV), and also exhibit potential performance for partitioning Pu(IV) from Np(IV) under acidic conditions. This work can help to deeply understand the interaction between transuranium elements and amidoxime-based adsorbents, and provide a theoretical basis for the separation of actinides with amidoxime-based adsorbents.

Complexation of Cyclic Glutarimidedioxime with Cerium: Surrogating for Redox Behavior of Plutonium

The complexation of cerium with glutarimidedioxime (H₂L) was studied by potentiometry, ESI-mass spectrometry, and cyclic voltammetry. Crystallization of [Ce^IV(HL)₃]⁺ from Ce³⁺ starting reactant indicated spontaneous complexation-driven oxidation. In aqueous solution, Ce³⁺ ions form three successive complexes, Ce(HL)²⁺, Ce(HL)₂⁺, and Ce(HL)₃ (where HL^- stands for the singly deprotonated ligand). The interactions of glutarimidedioxime with metal ions are dominantly electrostatic in nature, and the stability constants of the complexes are correlated to the charge density of metal ions. Extrapolations of predicted stability constant (log β) values were made from plotting effective charge and the ionic radius of the metal ion for Pu³⁺ and Pu⁴⁺. The stability constants of Pu^IV(HL)³⁺ and Pu^III(HL)²⁺ are estimated to be 27.74 and 19.75, respectively. The differences of stability constants mean that glutarimidedioxime selectively binds Pu⁴⁺ over Pu³⁺ by a factor of about 8 orders of magnitude, suggesting Pu⁴⁺ would be stabilized by chelation with glutarimidedioxime. The mechanism of reduction of Pu⁴⁺ to Pu³⁺ in acidic solution is explained by decomposition of glutarimidedioxime through acid hydrolysis rather than a chelation-driven mechanism.

Transformation details of poly(acrylonitrile) to poly(amidoxime) during the amidoximation process

During the amidoximation process, transformation details of poly(acrylonitrile) (PAN) to poly(amidoxime) (PAO) is critical for optimizing amidoximation conditions, which determine the physicochemical properties and adsorption capabilities of PAO-based materials. Although the optimization of amidoximation conditions can be reported in the literature, a detailed research on the transformation is still missing. Herein, the effect of the amidoximation conditions (i.e. temperature, time, and NH₂OH concentration) on the physicochemical properties and adsorption capabilities of PAO was studied in detail. The results showed that the extent of amidoximation reaction increased with increasing temperature, time, and NH₂OH concentration. However, a considerably high temperature (>60 °C) and a considerably long time (>3 h) could result in the degradation and decomposition of PAO's surface topologies and functional groups, and then decrease its adsorption capability for U(vi). The optimal amidoximation condition was 3 h, 60 °C and 50 g L⁻¹ NH₂OH. At this condition, the PAO obtained presented the highest adsorption capability for U(vi) under experimental conditions. These results provide pivotal information on the transformation of PAO-based materials during the amidoximation process.

During the amidoximation process, transformation details of poly(acrylonitrile) (PAN) to poly(amidoxime) (PAO) is critical for optimizing amidoximation conditions, which determine the physicochemical properties and adsorption capabilities of PAO-based materials.

A hydrolytically stable Ce(iv) complex of glutarimide-dioxime

Glutarimide-dioxime, a proligand known for its strongly electron-donating properties that has been studied for applications in uranium-sequestration from seawater, is considered here for stabilization of the cerium(iv) cation.

Aryl Diazonium-Assisted Amidoximation of MXene for Boosting Water Stability and Uranyl Sequestration via Electrochemical Sorption

Despite that two-dimensional transition metal carbides and carbonitrides (MXenes) are burgeoning candidates for remediation of environmental pollutants, the construction of robust functionalized MXene nanosheets with a high affinity for target heavy metal ions and radionuclides remains a challenge. Here we report the successful placement of amidoxime chelating groups on Ti₃C₂T_x MXene surface by diazonium salt grafting. The introduction of amidoxime functional groups significantly enhances the selectivity of Ti₃C₂T_x nanosheets for uranyl ions and also greatly improves their stability in aqueous solution, enabling efficient, rapid, and recyclable uranium extraction from aqueous solutions containing competitive metal ions. Benefiting from the excellent conductivity of MXenes, the amidoxime functionalized Ti₃C₂T_x nanosheets show outstanding electrochemical performance such that when loaded on carbon cloth the application of an electric field increases the uranium adsorption capacity from 294 to 626 mg/g, outperforming all organic electrochemical sorption materials reported previously. The present work provides an effective strategy to functionalize MXene nanosheets with fundamental implications for the design of MXene-based selective electrosorption electrode materials.

A highly efficient uranium grabber derived from acrylic fiber for extracting uranium from seawater

An amidoxime and carboxylate containing chelating adsorbent derived from acrylic fiber shows a fast adsorption rate and high uranium and low vanadium adsorption capacities in real seawater tests.

Iron-Binding and Anti-Fenton Properties of Novel Amino Acid-Derived Cyclic Imide Dioximes

We present a novel route for the preparation of amino acid-derived cyclic imide dioxime derivatives. Readily accessible amino acids were conveniently converted to their corresponding cyclic imide dioximes in simple synthetic steps. The aim of this work was to describe and compare the iron-chelating and antioxidant properties of synthesized compounds in relation to their molecular structure, and in particular, which of those features are essential for iron(II)-chelating ability. The glutarimide dioxime moiety has been established as an iron(II)-binding motif and imparts potent anti-Fenton properties to the compounds. Compound 3 was shown to strongly suppress hydroxyl radical formation by preventing iron cycling via Fe-complexation. These findings provide insights into the structural requirements for achieving anti-Fenton activity and highlight the potential use of glutarimide dioximes as antioxidants.

Complexation of UO2(CO3)34- with Mg2+ at varying temperatures and its effect on U(vi) speciation in groundwater and seawater

The ternary alkaline earth metal uranyl tricarbonate complexes, MnUO2(CO3)32n-4 (M = Mg and Ca), have been considered to be the major U(vi) species contributing to uranium mobility in natural water. Although MgUO2(CO3)32- can account for a substantial portion of U(vi) in a Mg2+-rich aqueous system and most processes regarding uranium are subjected to variable temperatures, chemical thermodynamic data for the prediction of the formation of MgUO2(CO3)32- at variable temperatures are still unknown. To fill the knowledge gap in the current chemical thermodynamic database, ultraviolet/visible (UV/Vis) absorption spectroscopy was employed to determine the formation constants (log K') of MgUO2(CO3)32- at varying temperatures of 10-85 °C in 0.5 mol kg-1 NaCl. The formation constants at infinite dilution, log K°, were obtained with specific ion interaction theory (SIT), and an increasing tendency of log K° with temperature was observed. Using calorimetric titration, the endothermic molar enthalpy of reaction (ΔrHm) of Mg2+ complexation with UO2(CO3)34- was determined at 25 °C. According to the chemical thermodynamic data obtained in this work, approximation models for the prediction of the temperature-dependent formation constant at a given temperature were examined and the constant enthalpy approximation with modification to the isoelectric reaction showed a satisfactory agreement with our experimental results. Finally, the effects of temperature on U(vi) speciation in Mg2+-rich groundwater and U(vi) extraction from seawater by amidoxime derivatives were examined. For the first time, this work provides important chemical thermodynamic data of MgUO2(CO3)32n-4 to assess the impact of temperature on U(vi) behaviour in groundwater and seawater.

Synthesis, structural and physicochemical characterization of a new type Ti6-oxo cluster protected by a cyclic imide dioxime ligand

A new type of Ti₆-oxo cluster with a structural motif TiIV6O₅ was synthesized of which the cyclo-Ti₃ metallic cores exhibit metallaromaticity.

Understanding the Binding of a Bifunctional Amidoximate-Carboxylate Ligand with Uranyl in Seawater

Extracting uranium from seawater remains a formidable challenge because of its extremely low concentration of 3.3 ppb. State-of-the-art polymeric sorbents employ both amidoximate and carboxylate groups on the side chains to achieve optimal U uptake and selectivity, but little is known about the synergistic effect between the two functional groups in binding with uranyl. Herein, we simulated the binding of a model amidoximate-carboxylate bifunctional ligand with uranyl using a combination of theoretical methods. Gas-phase quantum-mechanical calculations showed a chelate binding of a η² amidoximate and a monodentate carboxylate to uranyl. Ab initio molecular dynamics (MD) simulations in an explicit water solvation model confirmed the stability of the chelate mode. Classical MD and free-energy simulations in 0.5 M NaCl showed that the carboxylate group binds first to uranyl, leading to a loose intermediate state, and then, the amidoximate group binds, resulting in a more stable and tight chelate state. Binding of the second bifunctional ligand follows a similar process, and the two ligands prefer a trans configuration around the uranyl group. The simulated free energies indicate that the two bifunctional ligands bind with uranyl 55 kJ/mol stronger than the two ligands with only amidoximate groups. This work suggests an important synergy between amidoximate and carboxylate groups in binding uranyl.

Structural Characteristics, Population Analysis, and Binding Energies of [An(NO3)]2+ (with An = Ac to Lr)

Efficient predictive capabilities are essential for the actinide series since regulatory constraints for radioactive work, associated costs needed for specialized facilities, and the short half-lives of many actinides present great challenges in laboratory settings. Improved predictive accuracy is advantageous for numerous applications including the optimization and design of separation agents for nuclear fuel and waste. One limitation of calculations in support of these applications is that the large variations observed from predictions obtained with currently available methods can make comparisons across studies uncertain. Benchmarking currently available computational methodologies is essential to establish reliable practices across the community to guarantee an accurate physical description of the systems studied. To understand the performance of a variety of common theoretical methods, a systematic analysis of differences observed in the prediction of structural characteristics, electron withdrawing effects, and binding energies of [An(NO3)]2+ (with An = Ac to Lr) in gas and aqueous phases is reported. Population analysis obtained with Mulliken and Löwdin reflect a large dependence on the level of theory of choice, whereas those obtained with natural bond orbital show larger consistency across methodologies. Predicted stability across the actinide series calculated with coupled cluster with perturbative doubles and triples at the triple ζ level is equivalent to the one obtained when extrapolated to the complete basis set limit. The ground state of [Fm(NO3)]2+ and [Md(NO3)]2+ is predicted to have an electronic structure corresponding to An III state in gas and An IV in aqueous phase, whereas the ground state of [An(NO3)]2+ (with An = Ac to Es, Lr) presents an electronic structure corresponding to An IV in the gas and aqueous phase. The compounds studied with No in gas and aqueous phase present a preferred No III state, and the Lr compounds did not follow trends predicted for the rest of the actinide series, as previously observed in studies regarding its unusual electronic structure relative to its position in the periodic table.

Structural Analysis of the Complexation of Uranyl, Neptunyl, Plutonyl, and Americyl with Cyclic Imide Dioximes

Knowledge-based design of extracting agents for selective binding of actinides is essential in stock-pile stewardship, environmental remediation, separations, and nuclear fuel disposal. Robust computational protocols are critical for in depth understanding of structural properties and to further advance the design of selective ligands. In particular, rapid radiochemical separations require predictive capabilities for binding in the gas phase. This study focuses on gas-phase binding preferences of cyclic imide dioximes to uranyl, neptunyl, plutonyl, and americyl. Structural properties, electron withdrawing effects, and their effects on binding preferences are studied with natural bond-order population analysis. The aromatic amidoximes are found to have a larger electron-donation effect than the aliphatic amidoximes. It is also found that plutonyl is more electron withdrawing than uranyl, neptunyl, and americyl when bound to the cyclic imide dioximes studied.

Matrix-Independent Surface-Enhanced Raman Scattering Detection of Uranyl Using Electrospun Amidoximated Polyacrylonitrile Mats and Gold Nanostars

Reproducible detection of uranyl, an important biological and environmental contaminant, from complex matrixes by surface-enhanced Raman scattering (SERS) is successfully achieved using amidoximated-polyacrylonitrile (AO-PAN) mats and carboxylated gold (Au) nanostars. SERS detection of small molecules from a sample mixture is traditionally limited by nonspecific adsorption of nontarget species to the metal nanostructures and subsequent variations in both the vibrational frequencies and intensities. Herein, this challenge is overcome using AO-PAN mats to extract uranyl from matrixes ranging in complexity including HEPES buffer, Ca(NO₃)₂ and NaHCO₃ solutions, and synthetic urine. Subsequently, Au nanostars functionalized with carboxyl-terminated alkanethiols are used to enhance the uranyl signal. The detected SERS signals scale with uranyl uptake as confirmed using liquid scintillation counting. SERS vibrational frequencies of uranyl on both hydrated and lyophilized polymer mats are largely independent of sample matrix, indicating less complexity in the uranyl species bound to the surface of the mats vs in solution. These results suggest that matrix effects, which commonly limit the use of SERS for complex sample analysis, are minimized for uranyl detection. The presented synergistic approach for isolating uranyl from complex sample matrixes and enhancing the signal using SERS is promising for real-world sample detection and eliminates the need of radioactive tracers and extensive sample pretreatment steps.

Interactions of vanadium(iv) with amidoxime ligands: redox reactivity

The use of amidoxime-functionalized polymer fibers as a sorbent for uranium has attracted recent interest for the extraction of uranium from seawater. Vanadium is one of the main competing ions for uranium sorption as V(v) species, however, vanadium is also present as V(iv) in seawater. In the present study, the interactions of V(iv) with amidoxime and similar ligands were explored. Attempts were made to synthesize V(iv) complexes of glutaroimide-dioxime, a molecular analogue of polymer sorbents. However, V(iv) was found to react irreversibly with glutaroimide-dioxime and other oxime groups, oxidizing to the V(v) oxidation state. We have explored the reactions and propose mechanisms, as well as characterized the redox behavior of the vanadium-glutaroimide-dioxime complex.

First-Principles Integrated Adsorption Modeling for Selective Capture of Uranium from Seawater by Polyamidoxime Sorbent Materials

Nuclear power is a relatively carbon-free energy source that has the capacity to be utilized today in an effort to stem the tides of global warming. The growing demand for nuclear energy, however, could put significant strain on our uranium ore resources, and the mining activities utilized to extract that ore can leave behind long-term environmental damage. A potential solution to enhance the supply of uranium fuel is to recover uranium from seawater using amidoximated adsorbent fibers. This technology has been studied for decades but is currently plagued by the material's relatively poor selectivity of uranium over its main competitor vanadium. In this work, we investigate the binding schemes between uranium, vanadium, and the amidoxime functional groups on the adsorbent surface. Using quantum chemical methods, binding strengths are approximated for a set of complexation reactions between uranium and vanadium with amidoxime functionalities. Those approximations are then coupled with a comprehensive aqueous adsorption model developed in this work to simulate the adsorption of uranium and vanadium under laboratory conditions. Experimental adsorption studies with uranium and vanadium over a wide pH range are performed, and the data collected are compared against simulation results to validate the model. It was found that coupling ab initio calculations with process level adsorption modeling provides accurate predictions of the adsorption capacity and selectivity of the sorbent materials. Furthermore, this work demonstrates that this multiscale modeling paradigm could be utilized to aid in the selection of superior ligands or ligand compositions for the selective capture of metal ions. Therefore, this first-principles integrated modeling approach opens the door to the in silico design of next-generation adsorbents with potentially superior efficiency and selectivity for uranium over vanadium in seawater.

An overview and recent progress in the chemistry of uranium extraction from seawater

This review provides a brief background on the extraction of uranium from seawater as well as recent work by the United States Department of Energy on this project. The world's oceans contain uranium at 3 parts per billion, and despite this low concentration, there has been historical interest in harvesting it, mainly in Japan in the 1980s and the United States in this decade. Improvements in materials, chemistry, and deployment methods have all been made, with the ultimate goal of lower cost. This has been partially realized, dropping from approximately $2000 per kg U₃O₈ extracted in 1984 to $500 per kg today, although this is not yet competitive with terrestrial uranium. This technology may become cost-competitive if the cost of land-based uranium rises, especially if seawater extraction technology is improved further. The coordination chemistry aspects of the project are described in more detail, exploring the functional groups that are present on typical polymer sorbents as well as small-molecule analogues of these ligands. Selectivity for uranium over other metals, particularly vanadium, remains problematic, and techniques to both quantify binding strength and selectivity in order to overcome this issue are essential for future cost improvements.

Silane coupling and mordanting as attachment techniques for pyridylazo and thiazolylazo ligands in the synthesis of adsorbents for uranium in seawater

Activated carbon adsorbents modified with azo compounds (4-(2-pyridylazo)resorcinol, 1-(2-pyridylazo)-2-naphthol, 4-(2-thiazolylazo)resorcinol), or with allyl and vinylbenzyl derivatives of 4-(2-thiazolylazo)resorcinol, were observed to be highly effective in removing uranium from seawater and providing high loadings. Adsorbents consisting of azo compounds attached to fiber fabrics were prepared using silane coupling to attach azo reagents to silica fibers or mordanting agents such as tannic acid or aluminum acetate to attach them to cellulose fibers. Loadings of 15–45 mg U g−1 adsorbent were obtained. Scanning electron microscopy/energy dispersive X-ray spectroscopy measurements confirmed the presence of high concentrations of uranium on the surface of the silica-based and cellulose-based fibers.

Binding of oxime group to uranyl ion

Currently, the leading approach for extraction of uranium from seawater is selective sorption of UO2(2+) ions onto a poly(acrylamidoxime) fiber. Amidoxime functional groups are the most studied extractant moieties for this application, but are not perfectly selective, and understanding how these groups (and more generally the oxime groups) interact with UO2(2+) and competing ions in seawater is an important step in designing better extractants. We have started a new research programme aiming at in-depth studies of the uranyl-oxime/amidoxime interactions and we report here our first results which cover aspects of the coordination chemistry of 2-pyridyl ketoximes towards UO2(2+). Detailed synthetic investigations of various UO2(2+)/mepaoH and UO2(2+)/phpaoH reaction systems (mepaoH is methyl 2-pyridyl ketoxime and phpaoH is phenyl 2-pyridyl ketoxime) have provided access to the complexes [UO2(mepao)2(MeOH)2]{[UO2(NO3)(mepao)(MeOH)2]}2 (), [UO2(mepao)2(MeOH)2] (), [(UO2)2(O2)(O2CMe)2(mepaoH)2] () and [UO2(phpao)2(MeOH)2] (). The peroxido group in , which was isolated without the addition of external peroxide sources, probably arises from a bis(aquo)- and/or bis(hydroxido)-bridged diuranyl precursor in solution followed by photochemical oxidation of the bridging groups. The U(VI) atom in the [UO2(NO3)(mepao)(MeOH)2] molecules of () is surrounded by one nitrogen and seven oxygen atoms in a very distorted hexagonal bipyramidal geometry; two oxygen atoms from the terminal MeOH ligands, two oxygen atoms from the bidentate chelating nitrato group, and the oxygen and nitrogen atoms from the η(2) oximate group of the 1.110 (Harris notation) mepao(-) ligand define the equatorial plane. This plane consists of two terminal MeOH ligands and two η(2) oximate groups in the [UO2(mepao)2(MeOH)2] molecule () of . The structure of the [UO2(mepao)2(MeOH)2] molecule that is present in is very similar to the structure of the corresponding molecule in . The structure of the dinuclear molecule that is present in consists of two {UO2(O2CMe)(mepaoH)}(+) units bridged by a η(2):η(2):μ O2(2-) group. The equatorial plane of each uranyl site is composed of the pyridyl and oxime nitrogen atoms of a 1.011 mepaoH ligand, the oxygen atoms of an almost symmetrically coordinated bidentate chelating MeCO2(-) group and the two oxygen atoms of the peroxido groups. The core molecular structure of is similar to that of , the only difference being the presence of 1.110 phpao(-) ligands in the former instead of mepao(-) groups in the latter. The free pyridyl nitrogen atoms of mepao(-) and phpao(-) ligands of , and are acceptors of intramolecular H bonds from the ligated MeOH oxygen atoms. H-bonding and π-π stacking interactions build interesting supramolecular networks in the crystal structures of the four complexes. Compounds are the first structurally characterized uranyl complexes with 2-pyridyl aldoximes or ketoximes as ligands. IR data are discussed in terms of the coordination modes of the ligands in the complexes. (1)H NMR data in DMSO-d6 suggest that the complexes decompose in solution. The ESI(-) MS spectrum of dissolved in the NH4(O2CMe) buffer is indicative of the presence of [UO2(O2CMe)3](-), [UO2(O2CMe)2(phpao)](-), [UO2(O2CMe)(phpao)2](-) and [UO2(phpao)3](-) species. A common structural motif of the complexes containing the anionic mepao(-) (, ) and phpao(-) () ligands is that the deprotonated oximate group prefers to bind in the η(2) fashion forming a 3-membered chelating ring in spite of the presence of a pyridyl nitrogen atom, whose coordination would be expected to lead to 5- or 6-membered chelating rings.

Complexation-assisted reduction: complexes of glutaroimide-dioxime with tetravalent actinides (Np(iv) and Th(iv))

Glutaroimide-dioxime forms strong complexes with Np(iv) and Th(iv) in aqueous solution and in crystals. The formation of Np(iv) complexes from initial Np(v) is interpreted by a complexation-assisted reduction mechanism.