Long-range electronic connection in picket-fence like ferrocene-porphyrin derivatives

Phosphonate-substituted porphyrins as efficient, cost-effective and reusable photocatalysts

Recent advances in visible light photocatalysis represent a significant stride towards sustainable catalytic chemistry. However, its successful implementation in fine chemical production remains challenging and requires careful optimization of available photocatalysts. Our work aims to structurally modify bioinspired porphyrin catalysts, addressing issues related to their laborious synthesis and low solubility, with the goal of increasing their efficiency and developing reusable catalytic systems. We have demonstrated the catalytic potential of readily available meso-tetrakis[4-(diethoxyphosphoryl)phenyl]porphyrins (M(TPPP)). Novel metal (Pd(II), Co(II) and In(III)) complexes with this ligand were prepared in good yields. These chromophores were characterized in solution using spectroscopic (NMR, UV-vis, fluorescence) and electrochemical methods. The introduction of phosphonate groups on the phenyl substituents of meso-tetraphenylporphyrins (M(TPP)) improves solubility in polar organic solvents without significantly altering the photophysical properties and photostability of complexes. This structural modification also leads to easier reductions and harder oxidations of the macrocycle for all investigated complexes compared to the corresponding TPP derivatives. The free base porphyrin, zinc(II), palladium(II), and indium(III) complexes were studied as photocatalysts for oxidation of sulfides to sulfoxides using molecular oxygen as a terminal oxidant. Both dialkyl and alkyl aryl sulfides were quantitatively transformed into sulfoxides under blue LED irradiation in the acetonitrile-water mixture (10 : 1 v/v) with a low loading (0.005-0.05 mol%) of porphyrin photocatalysts, where H2(TPPP) and Pd(TPPP) were found to be the most efficient. The reaction mechanism was studied using photoluminescence and EPR spectroscopies. Then, to access reusable catalysts, water-soluble derivatives bearing phosphonic acid groups, H2(TPPP-A) and Pd(TPPP-A), were prepared in high yields. These compounds were characterized using spectroscopic methods. Single-crystal X-ray diffraction analysis of Pd(TPPP-A) reveals that the complex forms a 3D hydrogen-bonded organic framework (HOF) in the solid state. Both H2(TPPP-A) and Pd(TPPP-A) were found to catalyze the photooxidation of sulfides by molecular oxygen in the acetonitrile-water mixture (1 : 1 v/v), while only Pd(TPPP-A) resulted in selective production of sulfoxides. The complex Pd(TPPP-A) was easily recovered through extraction in the aqueous phase and successfully reused in five consecutive cycles of the sulfoxidation reaction.

Similar, Yet Different: Long-Range Metal-Metal Coupling and Electron-Transfer Processes in Metal-Free 5,10,15,20-Tetra(ruthenocenyl)porphyrin

The electronic structure, redox properties, and long-range metal-metal coupling in metal-free 5,10,15,20-tetra(ruthenocenyl)porphyrin (H₂TRcP) were probed by spectroscopic (NMR, UV-vis, magnetic circular dichroism (MCD), and atmospheric pressure chemical ionization (APCI)), electrochemical (cyclic voltammetry, CV, and differential pulse voltammetry, DPV), spectroelectrochemical, and chemical oxidation methods, as well as theoretical (density functional theory, DFT, and time-dependent DFT, TDDFT) approaches. It was demonstrated that the spectroscopic properties of H₂TRcP are significantly different from those in H₂TFcP (metal-free 5,10,15,20-tetra(ferrocenyl)porphyrin). Ruthenocenyl fragments in H₂TRcP have higher oxidation potentials than the ferrocene groups in the H₂TFcP complex. Similar to H₂TFcP, we were able to access and spectroscopically characterize the one- and two-electron oxidized mixed-valence states in the H₂TRcP system. DFT predicts that the porphyrin π-system stabilizes the [H₂TRcP]⁺ mixed-valence cation and prevents its dimerization, which is characteristic for ruthenocenyl systems. However, formation of the mixed-valence [H₂TRcP]²⁺ is significantly less reproducible than the formation of [H₂TRcP]⁺. DFT and TDDFT calculations suggest the ruthenocenyl fragment dominance in the highest occupied molecular orbital (HOMO) energy region and the presence of the low-energy MLCT (Rc → porphyrin (π*)) transitions in the visible region with energies higher than the predominantly porphyrin-centered Q-bands.

Coordination Chemistry of a Bis(Tetrazine) Tweezer: A Case of Host-Guest Behavior with Silver Salts

The carbon-carbon cross-coupling of phenyl s-tetrazine (Tz) units at their ortho-phenyl positions allows the formation of constrained bis(tetrazines) with original tweezer structures. In these compounds, the face-to-face positioning of the central tetrazine cores is reinforced by π-stacking of the electron-poor nitrogen-containing heteroaromatic moieties. The resulting tetra-aromatic structure can be used as a weak coordinating ligand with cationic silver. This coordination generates a set of bis(tetrazine)-silver(I) coordination complexes tolerating a large variety of counter anions of various geometries, namely, PF₆⁻, BF₄⁻, SbF₆⁻, ClO₄⁻, NTf₂⁻, and OTf⁻. These compounds were characterized in the solid state by single-crystal X-ray diffraction (XRD) and diffuse reflectance spectroscopy, and in solution by ¹H-NMR, mass spectrometry, electroanalysis, and UV-visible absorption spectrophotometry. The X-ray crystal structure of complexes {[Ag(3)][PF₆]}_∞ (4) and {[Ag(3)][SbF₆]}_∞ (6), where 3 is 3,3′-[(1,1′-biphenyl)-2,2′-diyl]-6,6′-bis(phenyl)-1,2,4,5-tetrazine, revealed the formation of 1D polymeric chains, characterized by an evolution to a large opening of the original tweezer and a coordination of silver(I) via two chelating nitrogen atom and some C=C π-interactions. Electrochemical and UV spectroscopic properties of the original tweezer and of the corresponding silver complexes are reported and compared. ¹H-NMR titrations with AgNTf₂ allowed the determination of the stoichiometry and apparent stability of two solution species, namely [Ag(3)]⁺ and [Ag(3)₂]²⁺, that formed in CDCl₃/CD₃OD 2:1 v/v mixtures.

Modular Synthesis of trans-A2 B2 -Porphyrins with Terminal Esters: Systematically Extending the Scope of Linear Linkers for Porphyrin-Based MOFs

Differently functionalized porphyrin linkers represent the key compounds for the syntheses of new porphyrin-based metal-organic frameworks (MOFs), which have gathered great interest within the last two decades. Herein we report the synthesis of a large range of 5,15-bis(4-ethoxycarbonylphenyl)porphyrin derivatives, through Suzuki and Sonogashira cross-coupling reactions of an easily accessible corresponding meso-dibrominated trans-A2 B2 -porphyrin with commercially available boronic acids or terminal alkynes. The resulting porphyrins were fully characterized through NMR, MS, and IR spectroscopy and systematically investigated through UV/Vis absorption. Finally, selected structures were saponified to the corresponding carboxylic acids and subsequently proven to be suitable for the synthesis of surface-anchored MOF thin films.

Diaqua-β-octaferrocenyltetraphenylporphyrin: a multiredox-active and air-stable 16π non-aromatic species

Herein the synthesis and properties of the first β-octaferrocenyltetraphenylporphyrin, {TPPFc₈(H₂O)₂}, in its extraordinary stable and non-aromatic 16π form are reported, showing seven separate reversible redox events.

Metal coordination induced ring contraction of porphyrin derivatives

Ferrocenyl-porphyrin derivatives upon treatment with silver acetate at room temperature show ring contraction followed by Ag-chelation.

5,10,15,20-Tetrakis(1′-acetylferrocenyl)porphyrin: Electronic and structural effects of acetyl group on TFcP

Synthesis of tetrasubstituted-tetraferrocenylporphyrins containing an acetyl functional group on all ferrocenyl moiety has been performed, allowing the analysis of the effects of these groups in terms of geometry and electronic distribution. TFcPs exhibit interesting electrochemical properties, mostly due to electronic communication between the ferrocenyl substituents and the porphyrin core and the presence of four acetyl substituents do not affect significantly these properties. Nevertheless the functionalization leads to a more defined electronic transition, in particular in the Q region and a more stable TFcP in terms of chemical oxidation. This can openinig the way to modulate and/or improve the performance of TFcP in various applications.

Synthesis of tetraferrocenylporphyrin and new metal complexes: Searching for reliable synthetic procedures

The tetraferrocenylporphyrin synthetic procedure was performed varying different reaction conditions. Mg, Mn, Pd and Cd complexes were synthesized and preliminarily studied. The results obtained show that the synthetic procedure strongly depends on catalyst, solvent and reagents concentration, even more than what observed with similar tetraarylporphyrins; concentration of substrates plays an important role in determining the outcome of the reactions.

Bottom-Up Hierarchical Self-Assembly of Chiral Porphyrins through Coordination and Hydrogen Bonds

A series of chiral synthetic compounds is reported that shows intricate but specific hierarchical assembly because of varying positions of coordination and hydrogen bonds. The evolution of the aggregates (followed by absorption spectroscopy and temperature-dependent circular dichroism studies in solution) reveal the influence of the proportion of stereogenic centers in the side groups connected to the chromophore ring in their optical activity and the important role of pyridyl groups in the self-assembly of these chiral macrocycles. The optical activity spans 2 orders of magnitude depending on composition and constitution. Two of the aggregates show very high optical activity even though the isolated chromophores barely give a circular dichroism signal. Molecular modeling of the aggregates, starting from the pyridine-zinc(II) porphyrin interaction and working up, and calculation of the circular dichroism signal confirm the origin of this optical activity as the chiral supramolecular organization of the molecules. The aggregates show a broad absorption range, between approximately 390 and 475 nm for the transitions associated with the Soret region alone, that spans wavelengths far more than the isolated chromophore. The supramolecular assemblies of the metalloporphyrins in solution were deposited onto highly oriented pyrolitic graphite in order to study their hierarchy in assembly by atomic force microscopy. Zero and one-dimensional aggregates were observed, and a clear dependence on deposition temperature was shown, indicating that the hierarchical assembly took place largely in solution. Moreover, scanning electron microscopy images of porphyrins and metalloporphyrins precipitated under out-of-equilibrium conditions showed the dependence of the number and position of chiral amide groups in the formation of a fibrillar nanomaterial. The combination of coordination and hydrogen bonding in the complicated assembly of these molecules-where there is a clear hierarchy for zinc(II)-pyridyl interaction followed by hydrogen-bonding between amide groups, and then van der Waals interactions-paves the way for the preparation of molecular materials with multiple chromophore environments.

Key multi(ferrocenyl) complexes in the interplay between electronic coupling and electrostatic interaction

In this review, the properties of the most significant examples of multi(ferrocenyl) cations containing a number of ferrocenyl units from two to six are discussed and the results are compared with the outcomes of some of our recent studies on conjugated ferrocenyl complexes.

Synthesis, characterization, redox, and Hg2+ optical ion sensing properties of ferrocenyl-containing maleo- and fumaronitrile derivatives

Mono-((Z)-2-amino-3-((E)-ferrocenylideneamino)butenedinitrile) (1) and bis-((E)-2,3-bis-((E)-ferrocenylideneamino)butenedinitrile) (2) substituted Schiff bases obtained by the reaction between ferrocenecarbaldehyde and diaminomaleonitrile were prepared and characterized by 1H and 13C NMR, IR, and UV-vis-NIR spectroscopy methods, elemental analysis, and X-ray crystallography. Density functional theory and time-dependent density functional theory were used to elucidate the electronic structure and the origin of observed excited states in both compounds. Electrochemical techniques were employed to investigate the possibility for the formation of a mixed-valence state of the iron centers in 2+, which are connected by a conjugated π-system. Two reversible oxidation potentials were observed in cyclic voltammetry, and spectroelectrochemical experiments revealed the presence of a low-energy intervalence charge transfer band in 2+, corresponding to class II of the mixed-valence systems. Both complexes were tested for cation-recognition properties using a variety of main group and transition-metal cations. It was shown that complex 1 can be used as a selective optical sensor in recognition of Hg2+ ions. It was also shown by NMR spectroscopy and X-ray crystallography that one of the final reaction products between Hg2+ ions and complex 1 is 2-ferrocenyl-4,5-dicyanoimidazole (3).

The corrole and ferrocene marriage: 5,10,15-triferrocenylcorrolato Cu

Two synthetic routes have been defined for the preparation of a 5,10,15-triferrocenylcorrole Cu derivative and preliminary electronic properties were investigated.