The Renaissance of Ferrocene-Based Electrocatalysts: Properties, Synthesis Strategies, and Applications

The fascinating electrochemical properties of the redox-active compound ferrocene have inspired researchers across the globe to develop ferrocene-based electrocatalysts for a wide variety of applications. Advantages including excellent chemical and thermal stability, solubility in organic solvents, a pair of stable redox states, rapid electron transfer, and nontoxic nature improve its utility in various electrochemical applications. The use of ferrocene-based electrocatalysts enables control over the intrinsic properties and electroactive sites at the surface of the electrode to achieve specific electrochemical activities. Ferrocene and its derivatives can function as a potential redox medium that promotes electron transfer rates, thereby enhancing the reaction kinetics and electrochemical responses of the device. The outstanding electrocatalytic activity of ferrocene-based compounds at lower operating potentials enhances the specificity and sensitivity of reactions and also amplifies the response signals. Owing to their versatile redox chemistry and catalytic activities, ferrocene-based electrocatalysts are widely employed in various energy-related systems, molecular machines, and agricultural, biological, medicinal, and sensing applications. This review highlights the importance of ferrocene-based electrocatalysts, with emphasis on their properties, synthesis strategies for obtaining different ferrocene-based compounds, and their electrochemical applications.

Electrochemical Sensing of H2O2 by Employing a Flexible Fe3O4/Graphene/Carbon Cloth as Working Electrode

We report the synthesis of Fe₃O₄/graphene (Fe₃O₄/Gr) nanocomposite for highly selective and highly sensitive peroxide sensor application. The nanocomposites were produced by a modified co-precipitation method. Further, structural, chemical, and morphological characterization of the Fe₃O₄/Gr was investigated by standard characterization techniques, such as X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscope (TEM) and high-resolution TEM (HRTEM), Fourier transform infrared (FTIR), and X-ray photoelectron spectroscopy (XPS). The average crystal size of Fe₃O₄ nanoparticles was calculated as 14.5 nm. Moreover, nanocomposite (Fe₃O₄/Gr) was employed to fabricate the flexible electrode using polymeric carbon fiber cloth or carbon cloth (pCFC or CC) as support. The electrochemical performance of as-fabricated Fe₃O₄/Gr/CC was evaluated toward H₂O₂ with excellent electrocatalytic activity. It was found that Fe₃O₄/Gr/CC-based electrodes show a good linear range, high sensitivity, and a low detection limit for H₂O₂ detection. The linear range for the optimized sensor was found to be in the range of 10-110 μM and limit of detection was calculated as 4.79 μM with a sensitivity of 0.037 µA μM^-1 cm^-2. The cost-effective materials used in this work as compared to noble metals provide satisfactory results. As well as showing high stability, the proposed biosensor is also highly reproducible.

Ferrocene-Grafted Carbon Nanotubes for Sensitive Non-Enzymatic Electrochemical Detection of Hydrogen Peroxide

Sensitive detection of hydrogen peroxide (H₂O₂) residue in aseptic packaging at point of use is critical to food safety. We present a sensitive non-enzymatic, amperometric H₂O₂ sensor based on ferrocene-functionalized multi-walled carbon nanotubes (MWCNT-FeC) and facile screen-printed carbon electrodes (SPCEs). The sensor utilizes the covalently grafted ferrocene as an effective redox mediator and the MWCNT networks to provide a large active surface area for efficient electrocatalytic reactions. The electrocatalytic MWCNT-FeC modified electrodes feature a high-efficiency electron transfer and a high electrocatalytic activity towards H₂O₂ reduction at a low potential of -0.15 V vs. Ag/AgCl. The decreased operating potential improves the selectivity by inherently eliminating the cross-reactivity with other electroactive interferents, such as dopamine, glucose, and ascorbic acid. The sensor exhibits a wide linear detection range from 1 μM to 1 mM with a detection limit of 0.49 μM (S/N=3). The covalently functionalized electrodes offered highly reproducible and reliable detection, providing a robust property for continuous, real-time H₂O₂ monitoring. Furthermore, the proposed sensor was successfully employed to determine H₂O₂ levels in spiked packaged milk and apple juice with satisfactory recoveries (94.33-97.62%). The MWCNT-FeC modified SPCEs offered a facile, cost-effective method for highly sensitive and selective point-of-use detection of H₂O₂.

Selective Functionalization Blended with Scaffold Conductivity in Graphene Acid Promotes H2O2 Electrochemical Sensing

The widespread industrial use of H₂O₂ has provoked great interest in the development of new and more efficient materials for its detection. Enzymatic electrochemical sensors have drawn particular attention, primarily because of their excellent selectivity. However, their high cost, instability, complex immobilization, and inherent tendency toward denaturation of the enzyme significantly limit their practical usefulness. Inspired by the powerful proton-catalyzed H₂O₂ reduction mechanism of peroxidases, we have developed a well-defined and densely functionalized carboxylic graphene derivative (graphene acid, GA) that serves as a proton source and conductive electrode for binding and detecting H₂O₂. An unprecedented H₂O₂ sensitivity of 525 μA cm^-2 mM^-1 is achieved by optimizing the balance between the carboxyl group content and scaffold conductivity of GA. Importantly, the GA sensor greatly outperforms all reported carbon-based H₂O₂ sensors and is superior to enzymatic ones because of its simple immobilization, low cost, and uncompromised sensitivity even after continuous operation for 7 days. In addition, GA-based sensing electrodes remain highly selective in the presence of interferents such as ascorbic acid, paracetamol, and glucose, as well as complex matrices such as milk. GA-based sensors thus have considerable potential for use in practical industrial sensing technologies.

Ultrasonic-assisted fabrication of thin-film electrochemical detector of H2O2 based on ferrocene-functionalized silver cluster

A novel ferrocene-functionalized silver cluster (FcAgCs) has been designed and synthesized with the assistant of ultrasound treatment and fully characterized by single crystal spectroscopy, IR, UV-Vis, XRD, TGA, NMR, CV and elemental analyses. Ultrasound synthesis method facilitates and accelerates synthesis of this amazing structure and plays a vital role in the synthesis of this special cluster. Single-crystal X-ray analysis reveal that the cluster can be described as a cationic [(dppf)₂Ag₄(CC^tBu)₂(CH₃OH)₂]²⁺ (dppf = 1,1'-bis(diphenylphosphino)ferrocene) species consisted of four rhombic silver atom and two isolated BF₄^- counter anions. Thermal stability greater than 200 °C and solution CV results show that the title cluster is sufficiently stable and suitable for the fabricating of FcAgCs/ITO thin-films and exploring as electrochemical responding materials. Based on its properties, we use it to prepare thin-films on ITO substrate by spin coating method. Verification of synthesis, thickness, uniformity and stability of the fabricated FcAgCs/ITO thin-films were characterized and confirmed by UV, XRD, SEM and the scotch tape adhesion peel test. Moreover, we use this FcAgCs/ITO thin-film electrode as thin-film electrochemical detector which shows sensitive and quick response in the detection of H₂O₂.

N-Arylated bisferrocene pyrazole for the dual-mode detection of hydrogen peroxide: an AIE-active fluorescent “turn ON/OFF” and electrochemical non-enzymatic sensor

N-Arylated bisferrocene pyrazoles for the dual-mode detection of H₂O₂ by AIE-active fluorescence and non-enzymatic electrochemical methods.

Ferrocene functionalized graphene based electrode for the electro-Fenton oxidation of ciprofloxacin

Ferrocene functionalized graphene based graphite felt electrode was firstly investigated for heterogeneous electro-Fenton oxidation of ciprofloxacin in neutral pH condition. Electrochemical reduction of Ferrocene functionalized graphene oxide (Fc-ErGO) was performed by cyclic voltammetry technique. At neutral pH condition, Fc-ErGO electrode (0.035 min^─1) exhibited ∼3 times and ∼9 times higher removal rates in comparison with plane ErGO (0.010 min^─1) and plane graphite felt (0.004 min^─1) electrodes respectively. The effect of pH and applied potential were studied for the degradation of ciprofloxacin in Fc-ErGO based electrode. Higher removal rate was observed at acidic pH (0.222 min^─1), whereas alkaline pH showed lower removal efficiency (0.014 min^─1). > 99% removal of ciprofloxacin was achieved with in 15 min and 120 min of reactions period at pH 3.0 and pH 7.0, respectively. H₂O₂ generation was found to be high in plane ErGO electrode system in all of the pH conditions. Owing to the high redox ability of ferrocene, Fc-ErGO electrode generated high concentration of OH radicals (426 μM pH 3.0; 247 μM pH 7.0; 210 μM pH 9.0) than ErGO and plane graphite felt electrodes; The electrode reusability study was performed to understand the electrode stability. There was no significant change in removal efficiency even after the 5th cycle of reusability study at both acidic and neutral conditions. The possible mechanism of oxidation in Fc-ErGO based electro-Fenton process was also proposed based on the continuous monitoring of H₂O₂ and OH radicals generated in the system.

Rational functionalization of reduced graphene oxide with an imidazole group for the electrochemical sensing of bisphenol A - an endocrine disruptor

Reduced graphene oxide has been rationally functionalized with histamine for the highly sensitive and selective electrochemical determination of bisphenol A (BPA). Histamine is covalently attached to graphene oxide by amide coupling and the oxygen functionalities of graphene oxide are partially reduced electrochemically. The facilitated electrochemical oxidation of BPA was achieved in neutral pH with functionalized reduced graphene oxide. The pH of the reaction controls the oxidation of BPA. Electrochemical oxidation is not favourable at pH less than the pKa of histamine due to the protonation of the imidazole nitrogen. The electrode is highly sensitive (1727.29 ± 12.48 nA μM-1 cm-2) towards BPA and shows a linear response up to 30 μM of BPA. It could detect as low as 0.03 nM of BPA (S/N = 5). The other coexisting analytes do not interfere with the voltammetric measurement of BPA.

Preparation of graphene/poly(2-acryloxyethyl ferrocenecarboxylate) nanocompositeviaa “grafting-onto” strategy

This article reports the construction of GS-PAEFC nanohybrids with excellent dispersibility and redox-responsibilityviaATNRC chemistry.

Ferrocene-graphene sheets for high-efficiency quenching of electrochemiluminescence from Au nanoparticles functionalized cadmium sulfide flower-like three dimensional assemblies and sensitive detection of prostate specific antigen

A signal-switchable electrochemiluminescence (ECL) aptasensor was presented for sensitive prostate specific antigen (PSA) assay using ferrocene-graphene sheets (Fc-GNs) for high-efficiency quenching of ECL from Au nanoparticles functionalized cadmium sulfide flower-like three dimensional (3D) assemblies (Au-CdS flower-like 3D assemblies). Au-CdS flower-like 3D assemblies were synthesized and employed as luminophore, exhibiting strong and stable ECL intensity, and followed by assembling captured DNA (cDNA) and hybridizing it with half of base sequence of PSA aptamer on the Au-CdS flower-like 3D assemblies modified electrode. The remaining part of the non-complementary base of the aptamer could preferentially adsorb GN with the signal switched "off" state. While in the presence of the PSA, the binding of PSA with aptamer caused desorption of aptamer from the surface of Fc-GNs and was then released from electrode surface, thus allowing the ECL signal enhancement. With the transformation of luminescence signal from "off" to "on", the aptasensor displays high sensitivity for PSA detection with a linear range from 1pgmL^-1 to 25ngmL^-1 and a detection limit of 0.38pgmL^-1S/N=3). Moreover, this developed method could be successfully applied to the determination of PSA in human serum samples with recoveries of 85.8-104.0%, suggesting great potential applications in biochemical analysis.

A novel "tunnel-like" cyclopalladated arylimine catalyst immobilized on graphene oxide nano-sheet

A novel "tunnel-like" cyclopalladated arylimine was prepared and immobilized on graphene oxide nano-sheet to form a hybrid catalytic material (denoted as F-GO-Pd) by self-assembly. The F-GO-Pd catalyst was characterized by XRD, FTIR, Raman, XPS, SEM, and TEM. This novel hybrid catalytic material was proven to be an efficient catalyst for the Suzuki-Miyaura coupling reaction of aryl halides (I, Br, Cl) with arylboronic acids in aqueous media under mild conditions with a very low amount of catalyst (0.01 mol%) and a high turnover frequency (TOF) (>20 000 h^-1). In particular, high yields also could be obtained at room temperature with prolonged time. F-GO-Pd also showed good stability and recyclability seven times with a superior catalytic activity. The heterogeneous catalytic mechanism was investigated with kinetic studies, hot filtration tests, catalyst poisoning tests, and in situ FTIR spectroscopy with a ReactIR and the deactivation mechanism of the catalysts was proposed through analysis of its chemical stability by TEM, SEM, Raman, and XRD, indicating that a heterogeneous catalytic process occurred on the surface and the changes of the catalytic activity during the recycling were related to the micro-environment of the catalyst surface.

Electron spin resonance and fluorescence imaging assisted electrochemical approach for accurate and comprehensive monitoring of cellular hydrogen peroxide dynamics

A new analytical system combining electrochemistry, ESR, and fluorescence imaging for accurately and comprehensively measuring the dynamics of cellular H₂O₂.

Electroactive and biocompatible functionalization of graphene for the development of biosensing platforms

Design and synthesis of low-cost, highly stable, electroactive and biocompatible material is one of the key steps for the advancement of electrochemical biosensing systems. To this end, we have explored a facile way for the successful synthesis of redox active and bioengineering of reduced graphene oxide (RGO) for the development of versatile biosensing platform. A highly branched polymer (PEI) is used for reduction and simultaneous derivation of graphene oxide (GO) to form a biocompatible polymeric matrix on RGO nanosheet. Ferrocene redox moieties are then wired onto RGO nanosheets through the polymer matrix. The as-prepared functional composite is electrochemically active and enables to accommodate enzymes stably. For proof-of-concept studies, two crucial redox enzymes for biosensors (i.e. cholesterol oxidase and glucose oxidase) are targeted. The enzyme integrated and RGO supported biosensing hybrid systems show high stability, excellent selectivity, good reproducibility and fast sensing response. As measured, the detection limit of the biosensors for glucose and cholesterol is 5µM and 0.5µM (S/N=3), respectively. The linear response range of the biosensor is from 0.1 to 15.5mM for glucose and from 2.5 to 25µM for cholesterol. Furthermore, this biosensing platform shows good anti-interference ability and reasonable stability. The nanohybrid biosensing materials can be combined with screen-printed electrodes, which are successfully used for measuring the glucose and cholesterol level of real human serum samples.

Optimized design of a nanostructured SPCE-based multipurpose biosensing platform formed by ferrocene-tethered electrochemically-deposited cauliflower-shaped gold nanoparticles

The demand for on-site nanodevices is constantly increasing. The technology development for the design of such devices is highly regarded. In this work, we report the design of a disposable platform that is structured with cauliflower-shaped gold nanoparticles (cfAuNPs) and we show its applications in immunosensing and enzyme-based detection. The electrochemical reduction of Au(III) allows for the electrodeposition of highly dispersed cauliflower-shaped gold nanoparticles on the surface of screen-printed carbon electrodes (SPCEs). The nanostructures were functionalized using ferrocenylmethyl lipoic acid ester which allowed for the tethering of the ferrocene group to gold, which serves as an electrochemical transducer/mediator. The bioconjugation of the surface with anti-human IgG antibody (α-hIgG) or horseradish peroxidase (HRP) enzyme yields biosensors, which have been applied for the selective electrochemical detection of human IgG (hIgG) or H2O2 as model analytes, respectively. Parameters such as the number of sweeps, amount of charge generated from the oxidation of the electrodeposited gold, time of incubation and concentration of the ferrocene derivatives have been studied using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and scanning electron microscopy (SEM). Selectivity and specificity tests have been also performed in the presence of potentially interfering substances to either hIgG or H2O2. Results showed that the devised immunosensor is endowed with good selectivity and specificity in the presence of several folds of competitive analytes. The enzyme-based platform showed a good catalytic activity towards H2O2 oxidation which predestined it to potential applications pertaining to enzymatic kinetics studies. The levels of hIgG in human serum and H2O2 in honey were successfully determined and served as assessment tools of the applicability of the platforms for real samples analysis.

An electrochemiluminescence biosensor for sensitive and selective detection of Hg2+ based on π-π interaction between nucleotides and ferrocene-graphene nanosheets

A solid-state electrochemiluminescence (ECL) biosensor based on a DNA-modified electrode platform that depends on the variation of π-π interaction before and after the binding of target analytes is put forward. The single-stranded DNA (ssDNA) probe was successfully assembled on the surface of a glassy carbon electrode (GCE), which was pre-modified with Ru(bpy)₃ ²⁺ complex and gold nanoparticles (GNPs). The ssDNA probe could strongly adsorb graphene due to the strong π-π interaction between nucleotides and graphene (GN), while in the presence of Hg²⁺, the conformational transformation of DNA from a single-stranded to a double-stranded structure resulted in inhibited adsorption of GN. With thymine (T)-rich ssDNA as a Hg²⁺ probe, we prepared the ECL biosensor by using ferrocene-graphene (Fc-GN) as a quenching unit to quench the ECL emission of Ru(bpy)₃ ²⁺, and the Hg²⁺ can be detected by quenching efficiency transformation when the Fc-GN gets away from Ru(bpy)₃ ²⁺. The biosensor exhibited a sensitive response to various ranges of concentration of Hg²⁺ with a detection limit of 18 pM. The ECL biosensor held great promise in the highly sensitive and selective detection of Hg²⁺ in natural water.

Graphene carrier for magneto-controllable bioelectrocatalysis

A magnetically driven fuel-free graphene carrier loaded with redox-active cargo-ferrocene as an electron mediator is fabricated for magneto-controllable bioelectrocatalysis. The activation and deactivation of redox-active cargo's redox activity by magnetically driven positioning of the graphene carrier with loaded ferrocene near and away from the conductive support can be employed for magneto-switchable bioelectrocatalyzed oxidation of glucose by glucose oxidase between active and inactive electrocatalytic states, respectively.

Ferrocene-functionalized polydopamine as a novel redox matrix for H2O2 oxidation

Simple synthesis of a ferrocene-functionalized polydopamine [poly(DA-Fc)] is described. This redox film displays excellent electrocatalytic oxidation of H₂O₂ in neutral buffer solutions in a Fenton-type reaction, and is found to be selective to H₂O₂ with negligible interference from other small molecules.

Recent Progress in Ferrocene-Modified Thin Films and Nanoparticles for Biosensors

This article reviews recent progress in the development of ferrocene (Fc)-modified thin films and nanoparticles in relation to their biosensor applications. Redox-active materials in enzyme biosensors commonly use Fc derivatives, which mediate electron transfer between the electrode and enzyme active site. Either voltammetric or amperometric signals originating from redox reactions of Fc are detected or modulated by the binding of analytes on the electrode. Fc-modified thin films have been prepared by a variety of protocols, including insitu polymerization, layer-by-layer (LbL) deposition, host-guest complexation and molecular recognitions. Insitu polymerization provides a facile way to form Fc thin films, because the Fc polymers are directly deposited onto the electrode surface. LbL deposition, which can modulate the film thickness and Fc content, is suitable for preparing well-organized thin films. Other techniques, such as host-guest complexation and protein-based molecular recognition, are useful for preparing Fc thin films. Fc-modified Au nanoparticles have been widely used as redox-active materials to fabricate electrochemical biosensors. Fc derivatives are often attached to Au nanoparticles through a thiol-Au linkage. Nanoparticles consisting of inorganic porous materials, such as zeolites and iron oxide, and nanoparticle-based composite materials have also been used to prepare Fc-modified nanoparticles. To construct biosensors, Fc-modified nanoparticles are immobilized on the electrode surface together with enzymes.

Synthesis of redox polymer nanobeads and nanocomposites for glucose biosensors

Redox polymer nanobeads of branched polyethylenimine binding with ferrocene (BPEI-Fc) were synthesized using a simple chemical process. The functionality and morphology of the redox polymer nanobeads were investigated by Fourier transform infrared spectroscopy (FTIR) and transmission electron microscopy (TEM). This hydrophilic redox nanomaterial could be mixed with glucose oxidase (GOx) for drop-coating on a screen-printed carbon electrode (SPCE) for glucose sensing application. Electrochemical properties of the BPEI-Fc/GOx/SPCE prepared under different conditions were studied by cyclic voltammetry (CV). On the basis of these CV results, the synthetic condition of the BPEI-Fc/GOx/SPCE could be optimized. By incorporating conductive poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS), the performance of a redox polymer nanobead–based enzyme electrode could be further improved. The influence of PEDOT:PSS on the nanocomposite enzyme electrode was discussed from the aspects of the apparent electron diffusion coefficient (D(app)) and the charge transfer resistance (R(ct)). The glucose-sensing sensitivity of the BPEI-Fc/PEDOT:PSS/GOx/SPCE is calculated to be 66 μA mM(–1) cm(–2), which is 2.5 times higher than that without PEDOT:PSS. The apparent Michaelis constant (K(M)(app)) of the BPEI-Fc/PEDOT:PSS/GOx/SPCE estimated by the Lineweaver–Burk plot is 2.4 mM, which is much lower than that of BPEI-Fc/GOx/SPCE (11.2 mM). This implies that the BPEI-Fc/PEDOT:PSS/GOx/SPCE can catalytically oxidize glucose in a more efficient way. The interference test was carried out by injection of glucose and three common interferences: ascorbic acid (AA), dopamine (DA), and uric acid (UA) at physiological levels. The interferences of DA (4.2%) and AA (7.8%) are acceptable and the current response to UA (1.6%) is negligible, compared to the current response to glucose.

Redox-functionalized graphene oxide architecture for the development of amperometric biosensing platform

We describe the redox functionalization of graphene oxide (GO) and the development of versatile amperometric biosensing platforms for clinically important analytes such as cholesterol ester, uric acid and glucose. Ferrocene (Fc) redox units were covalently tethered onto the GO backbone using diamine sigma spacers of different chain lengths (C3-, C6-, and C9-diamines). The functionalized GO (Fc-GO) displays a pair of redox peak corresponding to Fc/Fc(+) redox couple at ~0.225 V. The surface coverage and heterogeneous electron transfer rate constant of Fc-GO depends on the length of sigma spacer. Amperometric biosensors for cholesterol (total), uric acid and glucose have been developed by integrating Fc-GO and the respective redox enzymes with screen printed electrode. Fc-GO efficiently mediates the bioelectrocatalytic oxidation of the substrates in the presence of the redox enzymes. The spacer length of Fc-GO controls the bioelectrocatalytic response of the biosensing platforms. The sensitivity of the biosensors based on C9 sigma spacer is significantly higher than the others. The detection limit (S/N = 3) of the biosensors for cholesterol and uric acid was 0.1 μM and for glucose it was 1 μM. Excellent stability, reproducibility, selectivity and fast response time were achieved. Biosensing of cholesterol, uric acid and glucose in human serum sample is successfully demonstrated with the biosensors, and the results are validated with the clinical laboratory measurement.

Fluorescence resonance energy transfer quenching at the surface of graphene quantum dots for ultrasensitive detection of TNT

This paper for the first time reports a chemical method to prepare graphene quantum dots (GQDs) from GO. Water soluble and surface unmodified GQDs, serving as a novel, effective and simple fluorescent sensing platform for ultrasensitive detection of 2,4,6-trinitrotoluene (TNT) in solution by fluorescence resonance energy transfer (FRET) quenching. The fluorescent GQDs can specifically bind TNT species by the π-π stacking interaction between GQDs and aromatic rings. The resultant TNT bound at the GQDs surface can strongly suppress the fluorescence emission by the FRET from GQDs donor to the irradiative TNT acceptor through intermolecular polar-polar interactions at spatial proximity. The unmodified GQDs can sensitively detect down to ~0.495 ppm (2.2 μM) TNT with the use of only 1 mL of GQDs solution. The simple FRET-based GQDs reported here exhibit high and stable fluorescence. Eliminating further treatment or modification, this method simplifies and shortens the experimental process. It possesses good assembly flexibility and can thus find many applications in the detection of ultratrace analytes.

Spontaneous and fast growth of large-area graphene nanofilms facilitated by oil/water interfaces

An efficient wet-chemical method based on soft interfacial self-assembly is developed for spontaneous, fast growth of large-area graphene nanofilms on various substrates. The graphene nanofilms produced show tunable optical properties and a highly reversible optoelectronic response. Complementary to chemical vapor deposition, this method could offer a fast, simple, and low-cost chemical strategy to produce graphene nanofilms.