Structural and Optical Sensing Properties of Nonthermal Atmospheric Plasma-Synthesized Polyethylene Glycol-Functionalized Gold Nanoparticles

Polyethylene glycol-functionalized gold nanoparticles (Au@PEG NPs) were prepared by a simple plasma-assisted method without additional reducing chemicals. After irradiating tetrachloroauric acid (HAuCl₄) and polyethylene glycol (PEG) in aqueous medium with an argon plasma jet, the gold precursor transformed into an Au@PEG NP colloid that exhibited surface plasma resonance at 530 nm. When the plasma jet entered the water, additional reactive species were induced through interactions between plasma-generated reactive species and aqueous media. Interaction of the gold precursor with the plasma-activated medium allowed the synthesis of gold nanoparticles (AuNPs) without reductants. The plasma-synthesized Au@PEG NPs had a quasi-spherical shape with an average particle diameter of 32.5 nm. The addition of PEG not only helped to stabilize the AuNPs but also increased the number of AuNPs. Au@PEG NP-loaded paper (AuNP-paper) was able to detect the degradation of rhodamine B, therefore, indicating that AuNP-paper can act as a surface-enhanced Raman scattering platform. Dye degradation by plasma treatment was investigated by optical absorption and Raman spectroscopy. The method proposed for the fabrication of Au@PEG NPs is rapid, low-cost, and environment-friendly and will facilitate the application of plasma-synthesized nanomaterials in sensors.

Enhancing catalytic potential of gold nanoparticles by linear and cross-linked polyurethane blending

This work describes the synthesis of gold nanoparticles (AuNPs) and their subsequent stabilization using a water-borne polyurethane matrix of micro-particles (Au/PU) by a heating method. Composites were prepared both from linear and cross-linked polyurethane (LPU and CPU). Catalytic activities of synthesized composites exhibiting 226.4 nm size were evaluated for reduction of Congo red dye. More than 90% Congo red degradation was achieved in just 6 minutes with Au/LPU. Under similar conditions, 30% of dye was degraded with Au/CPU composite in 5 minutes. The effects of different variables such as concentration of dye, catalyst dose and concentration of reagents have been optimized. The degradation process followed first order kinetics. The most efficient composite (Au/LPU) was characterized using UV/Vis, FTIR, SEM, XRD and DLS techniques. The excellent catalytic activity can be attributed to the polyurethane matrix making the dye available to catalytic sites (AuNPs).

This work describes the synthesis of gold nanoparticles (AuNPs) and their subsequent stabilization using a water-borne polyurethane matrix of micro-particles (Au/PU).

Assessment of antioxidant and dermoprotective activities of gold nanoparticles as safe cosmetic ingredient

Hubertia ambavilla, an endemic plant originating from Reunion Island in the Indian Ocean, is traditionally used as an anti-inflammatory and in healing, both for internal and external use. Polyphenolic compounds from aqueous phase extractions can reduce metal salts into nanoparticles and stabilize them in one step. Although gold nanoparticles are well described in the literature as anti-ageing ingredients, the nanoparticles presented herein are novel and are synthesized using a green process. We demonstrate their efficiency as dermoprotective, free radical scavenger and antioxidant cosmetic ingredients. Comparison with common nanoparticles obtained by the Turkevich method clearly emphasizes the necessity to carefully screen the products used for nanoparticle coatings, as they play a major role in the biological properties of the product. Hubertia ambavilla mediated gold nanoparticles are non-toxic to human dermal fibroblasts, possess free radical scavenging potential, and protect against damage to fibroblast and dermal cells caused by ultraviolet A radiation.

In Situ Self-Assembly of Ultrastable Gold Nanoparticles on Polyvinyl Alcohol Nanofibrous Mats for Use as Highly Reusable Catalysts

Designing highly stable and reusable catalytic systems based on Au nanoparticles (NPs) is a significant challenge in nanocatalysis research. Here, we have fabricated polyvinyl alcohol (PVA) nanofibrous mat/Au NP composite catalysts with NPs in uniform size and good distribution by use of a developed in situ growth approach. In this method, Au seeds were first adsorbed on PVA nanofibrous mat surfaces rather than on relatively large Au NPs and then used to grow NPs in Au seed solution; thus, the steric hindrance effect was alleviated and a high loading was used for Au NPs up to 11 wt %. Strong interfacial interactions between the Au NPs and the PVA nanofibrous mats due to introducing a large number of hydrogen bonds provide high thermal stability for the PVA side chains, long-term catalytic stability, and excellent reusability. Consequently, the proposed in situ grown PVA/Au NP nanofibrous mats produce high catalytic activity for at least 15 cycles over a 30 d period. This work provides a potential approach for fabricating highly stable and reusable metal NPs on polymer nanofibrous mats to facilitate a wide variety of applications.

Facile method for iodide ion detection via the fluorescence decrease of dihydrolipoic acid/beta-cyclodextrin protected Ag nanoclusters

In this work, novel photoluminescent Ag nanoclusters (Ag NCs) with red emission are synthesized and successfully used for detecting iodide ion (I^-). The dihydrolipoic acid (DHLA) is used as the stabilizing agent and beta-cyclodextrin (β-CD) is used as the auxiliary stabilizing agent. DHLA and β-CD are combined with Ag atoms by the formation of AgS bonds and hydrophobic interaction, respectively. Functionalization of β-CD endows good photoluminescent properties and solubility in water to the Ag NCs. The obtained DHLA and β-CD-protected Ag NCs (DHLA/β-CD-Ag NCs) are spherical and display a dispersed state. However, the DHLA/β-CD-Ag NCs are aggregated in the presence of I^-, accompanied by the decrease in their fluorescence intensity. Because the integrity of β-CD cavities is retained on the surface of DHLA/β-CD-Ag NCs, which preserves their capability for I^- host-guest recognition, the DHLA/β-CD-Ag NCs combine with I^- through the formation of inclusion complexes. Based on this phenomenon, the prepared DHLA/β-CD-Ag NCs can be designed as a novel fluorescent probe for I^- detection. The limit of detection (LOD) is calculated as 0.06 μM, indicating that it is an ideal probe for I^- detection in practical applications.

Immobilization and 3D Hot-Junction Formation of Gold Nanoparticles on Two-Dimensional Silicate Nanoplatelets as Substrates for High-Efficiency Surface-Enhanced Raman Scattering Detection

We synthesize a high-efficiency substrate for surface-enhanced Raman scattering (SERS) measurements, which is composed of gold nanoparticles (AuNPs) on two-dimensional silicate nanoplatelets acting as an inorganic stabilizer, via the in-situ reduction of hydrogen tetrachloroaurate (III) by sodium citrate in an aqueous solution. Silicate platelets of ~1-nm thickness and various sizes, viz. laponite (50 nm), sodium montmorillonite (Na⁺⁻MMT, 100 nm), and mica (500 nm), are used to stabilize the AuNPs (Au@silicate), which are formed with uniform diameters ranging between 25 and 30 nm as confirmed by transmission electron microscopy (TEM). In particular, the laponite SERS substrate can be used in biological, environmental, and food safety applications to measure small molecules such as DNA (adenine molecule), dye (Direct Blue), and herbicide (paraquat) as it shows high detection sensitivity with a detection limit of 10-9 M for adenine detection. These highly sensitive SERS substrates, with their three-dimensional hot-junctions formed with AuNPs and two-dimensional silicate nanoplatelets, allow the highly efficient detection of organic molecules. Therefore, these Au@silicate nanohybrid substrates have great potential in biosensor technology because of their environmentally-friendly and simple fabrication process, high efficiency, and the possibility of rapid detection.

Electrospun composite nanofibre fabrics containing green reduced Ag nanoparticles as an innovative type of antimicrobial insole

In this study, polyvinyl alcohol (PVA) nanofibrous membranes containing silver nanoparticles (Ag NPs) were successfully fabricated by the combination of electrospinning and a green reduction approach. Through the electrospinning technique, uniform and smooth nanofibres can be obtained, and the Ag NPs with a narrow size distributions are well dispersed in PVA nanofibres. The investigation indicates that the mass ratio of reductant tea polyphenols and AgNO₃ play a crucial role in controlling the size of the Ag NPs. More importantly, multi-layered fabrics with a layer of PVA/Ag NP nanofibrous membrane layered onto cotton substrates were developed and applied to shoe insoles. The fabricated shoe insoles with functionalized PVA nanofibres exhibit remarkable antimicrobial activity against both E. coli and S. aureus (i.e. antibacterial rate > 99%). The creation of such an encouraging fabric could establish a new optimization methodology for producing nanoengineered functional textiles.

This study aims to develop an antimicrobial insole with an electrospun nanofibre mat which contains green reduced Ag NPs by a facile fabrication method.

In situ synthesis, stabilization and activity of protein-modified gold nanoparticles for biological applications

We demonstrate an in situ synthesis, stabilization and activity of a nanoparticle-based protein carrier platform via the Layer-by-Layer (LbL) technology.

Fabrication of tubular braid reinforced PMIA nanofiber membrane with mussel-inspired Ag nanoparticles and its superior performance for the reduction of 4-nitrophenol

A novel tubular braid reinforced (TBR) PMIA/CA-PEI/Ag nanofiber membrane for application in dynamic catalysis was introduced in this study. The preparation method of the TBR PMIA/CA-PEI/Ag nanofiber membrane was facile and efficient. The TBR PMIA/CA-PEI/Ag nanofiber membrane was characterized by field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD) and thermal gravimetric analysis (TGA). The mechanical properties were evaluated by a universal material testing machine. The tensile strength of TBR nanofiber membrane exceeded 500 MPa, whereas that of the nanofiber membrane without reinforcement was merely 10 MPa. Besides, the compressive strength of the TBR nanofiber membrane was also reinforced, which indicated that the TBR nanofiber membrane could withstand a higher operating pressure. The reduction of 4-NP to 4-AP was selected as the model reaction to evaluate the catalytic property of TBR PMIA/CA-PEI/Ag nanofiber membrane. The apparent rate constant of dynamic catalysis was 34.58 times higher than that of static catalysis. After 10 cycles, the conversion of 4-NP was still higher than 95.3%. This indicated that the TBR PMIA/CA-PEI/Ag nanofiber membrane had superior stability and recyclability. Besides, the TBR PMIA/CA-PEI/Ag nanofiber membrane also showed superior catalytic performance when it was used for catalyzing other environmental pollutants.

Dispersion and soap-free emulsion polymerization of tert-butyl acrylate with the living character and controlled particle size mediated by cobalt porphyrin

Living radical polymerization (LRP) of tert-butyl acrylate (tBA) was carried out via the dispersion and soap-free emulsion polymerization mediated by cobalt porphyrin [cobalt tetramethoxyphenylporphyrin, (TMOP)Co(ii)].

Three-in-One: Sensing, Self-Assembly, and Cascade Catalysis of Cyclodextrin Modified Gold Nanoparticles

We herein present a three-in-one nanoplatform for sensing, self-assembly, and cascade catalysis, enabled by cyclodextrin modified gold nanoparticles (CD@AuNPs). Monodisperse AuNPs 15-20 nm in diameter are fabricated in an eco-friendly way by the proposed one-step colloidal synthesis method using CD as both reducing agents and stabilizers. First, the as-prepared AuNPs are employed as not only scaffolds but energy acceptors for turn-on fluorescent sensing based on guest replacement reaction. Then, the macrocyclic supramolecule functionalized AuNPs can be controllably assembled and form well-defined one- and two-dimensional architectures using tetrakis(4-carboxyphenyl)porphyrin as mediator. Finally, in addition to conventional host-guest interaction based properties, the CD@AuNPs possess unpredictable catalytic activity and exhibit mimicking properties of both glucose oxidase and horseradish peroxidase simultaneously. Especially, the cascade reaction (glucose is first catalytically oxidized and generates gluconic acid and H₂O₂; then the enzymatic H₂O₂ and preadded TMB (3,3',5,5'-tetramethylbenzidine) are further catalyzed into H₂O and oxTMB, respectively) is well-achieved using the AuNPs as the sole catalyst. By employing a joint experimental-theoretical study, we reveal that the unique catalytic properties of the CD@AuNPs probably derive from the special topological structures of CD molecules and the resulting electron transfer effect from the AuNP surface to the appended CD molecules.

Protein-directed synthesis of highly monodispersed, spherical gold nanoparticles and their applications in multidimensional sensing

An in-situ reduction method has been reported to prepare gold nanoparticles (GNPs) of 40–110 nm by using the green reducing agents of proteins, which are activated by H₂O₂ and the superoxide anion (). The protein of collagen turns HAuCl₄ to the aqueous Au(I) ainions, which are further reduced by other proteins to be highly monodispersed and spherical GNPs of different sizes. The GNPs reduced by different proteins are found to be with the exposed {100} facets, the distinctive UV-vis absorption spectra and various colors (See Fig. 1). By means of extracting the color responses, such as red, green and blue (RGB) alterations, an in-situ reduction method-based multidimensional sensing platform is fabricated in the process of GNPs synthesis. Without further modification of GNPs, nine common proteins are found to be well detected and discriminated at different concentrations. Moreover, this sensing platform also demonstrates great potentials in qualitative and semiquantitative analysis on the individuals of these proteins with high sensitivity. Furthermore, the validation of this multidimensional sensing platform has been carried out by analysis on the spiked proteins in human urine and the target proteins in complex matrix (e.g. lysozyme in human tear).

EGCG/gelatin-doxorubicin gold nanoparticles enhance therapeutic efficacy of doxorubicin for prostate cancer treatment

Aim: Development of epigallocatechin gallate (EGCG) and gelatin-doxorubicin conjugate (GLT-DOX)-coated gold nanoparticles (DOX-GLT/EGCG AuNPs) for fluorescence imaging and inhibition of prostate cancer cell growth. Materials & methods: AuNPs alternatively coated with EGCG and DOX-GLT conjugates were prepared by a layer-by-layer assembly method. The physicochemical properties of the AuNPs and the effect of Laminin 67R receptor-mediated endocytosis on the anticancer efficacy of the AuNPs were examined. Results: The AuNPs significantly inhibit the proliferation of PC-3 cancer cell and the enzyme-responsive intracellular release of DOX could be tracked by monitoring the recovery of the fluorescence signal of DOX. Conclusion: Laminin 67R receptor-mediated delivery of DOX using the AuNPs enhanced cellular uptake of DOX and improved apoptosis of PC-3 cells.

Polyacrylonitrile (PAN)/crown ether composite nanofibers for the selective adsorption of cations

Electrospun PAN/crown ether nanofibers have potential for selective recovery of specific ions from mixtures with ions.

Dispersion polymerization of acrylamide with living character and controlled morphologies initiated and mediated by cobalt porphyrin

Dispersion polymerization of acrylamide (AM) catalyzed by cobalt porphyrin [cobalt tetramethoxyphenylporphyrin, (TMOP)Co(ii)] with the feature of living radical polymerization (LRP) in alcohol/water or dimethylformamide (DMF)/water is described.

Radiofrequency-triggered tumor-targeting delivery system for theranostics application

In this study, a new type of magnetic tumor-targeting PEGylated gold nanoshell drug delivery system (DOX-TSMLs-AuNSs-PEG) based on doxorubicin-loaded thermosensitive magnetoliposomes was successfully obtained. The reverse-phase evaporation method was used to construct the magnetoliposomes, and then gold nanoshells were coated on the surface of it. The DOX-TSMLs-AuNSs-PEG delivery system was synthesized after SH-PEG2000 modification. This multifunction system was combined with a variety of functions, such as radiofrequency-triggered release, chemo-hyperthermia therapy, and dual-mode magnetic resonance/X-ray imaging. Importantly, the DOX-TSMLs-AuNSs-PEG complex was found to escape from endosomes after cellular uptake by radiofrequency-induced endosome disruption before lysosomal degradation. All results in vitro and in vivo indicated that DOX-TSMLs-AuNSs-PEG is a promising effective drug delivery system for diagnosis and treatment of tumors.

Eco-synthesis of graphene and its use in dihydronicotinamide adenine dinucleotide sensing

In this paper, we report a green and eco-friendly approach to synthesize reduced graphene oxide (rGO) via a mild hydrothermal process using malt as a reduced agent. The proposed method is based on the reduction of graphene oxide (GO) in malt solution by making use of the reducing capability of phenolic compounds contained in malt solution. The obtained rGO was characterized by atomic force microscopy (AFM), ultraviolet-visible (UV-vis) absorption spectroscopy, X-ray diffraction spectroscopy (XRD), Raman spectroscopy, Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), and transmission electron microscopy (TEM). Electrochemical impedance spectroscopy analysis revealed that the charge transfer resistance of rGO modified glassy carbon (GC) electrode was much lower than that of the GC electrode. The electrochemical behavior of dihydronicotinamide adenine dinucleotide (NADH) on rGO modified GC electrode was investigated by cyclic voltammetry and amperometry. Electrochemical experiments indicated that rGO/GC electrode exhibited excellent electrocatalytic activity toward the NADH, which can be attributed to excellent electrical conductivity and high specific surface area of the rGO composite. The resulting biosensor showed highly sensitive amperometric response to NADH with a low detection limit (0.33μM).

Facile in situ synthesis of silver nanoparticles on procyanidin-grafted eggshell membrane and their catalytic properties

Facile, efficient, and robust immobilization of metal nanostructures on porous bioscaffolds is an interesting topic in materials chemistry and heterogeneous catalysis. This study reports a facile in situ method for the synthesis and immobilization of small silver nanoparticles (AgNPs) at room temperature on natural eggshell membrane (ESM), which presents interwoven fibrous structure and can be used as a unique protein-based biotemplate. Procyanidin (Pro), a typical plant polyphenol extracted from grape seeds and skins, was first grafted onto ESM fibers to serve as both reductant and stabilizer during the synthesis process. As a result, the AgNPs were facilely synthesized and robustly immobilized on the ESM fibers without additional chemical reductant or physical treatments. The morphology and microstructure of the as-prepared AgNPs@Pro-ESM composites were characterized by combined microscopy and spectroscopy technologies. The results indicate that small AgNPs with mean diameter of 2.46 nm were successfully prepared on the Pro-ESM biotemplate. The composites exhibited good catalytic activity toward the reduction of 4-nitrophenol (4-NP). More importantly, these composite catalysts can be easily recovered and reused for more than eight cycles because of their high stability.

One-step synthesis of size-tunable Ag nanoparticles incorporated in electrospun PVA/cyclodextrin nanofibers

One-step synthesis of size-tunable silver nanoparticles (Ag-NP) incorporated into electrospun nanofibers was achieved. Initially, in situ reduction of silver salt (AgNO3) to Ag-NP was carried out in aqueous solution of polyvinyl alcohol (PVA). Here, PVA was used as reducing agent and stabilizing polymer as well as electrospinning polymeric matrix for the fabrication of PVA/Ag-NP nanofibers. Afterwards, hydroxypropyl-beta-cyclodextrin (HPβCD) was used as an additional reducing and stabilizing agent in order to control size and uniform dispersion of Ag-NP. The size of Ag-NP was ∼8 nm and some Ag-NP aggregates were observed for PVA/Ag-NP nanofibers, conversely, the size of Ag-NP decreased from ∼8 nm down to ∼2 nm within the fiber matrix without aggregation were attained for PVA/HPβCD nanofibers. The PVA/Ag-NP and PVA/HPβCD/Ag-NP nanofibers exhibited surface enhanced Raman scattering (SERS) effect. Moreover, antibacterial properties of PVA/Ag-NP and PVA/HPβCD/Ag-NP nanofibrous mats were tested against Gram-negative (Escherichia coli) and Gram-positive (Staphylococcus aureus) bacteria.