Universal adhesion using mussel foot protein inspired hydrogel with dynamic interpenetration for topological entanglement

Achieving adhesion of hydrogels to universal materials with desirable strength remains a challenge despite emerging application of hydrogels. Herein we present a mussel foot protein (Mfp) inspired polyelectrolyte hydrogel of poly(ethylenimine)/poly(acrylic acid)-dopamine (PEI/PAADA) developed for universal tough adhesion. The highly-concentrated electrostatic and hydrogen-bonding interactions in PEI/PAADA hydrogel resulted in a tensile strength, strain at break, and toughness of 0.297 MPa, 2784 % and 5.440 MJ m-3, respectively. Moreover, the hydrogel can heal itself from physical damages, even can be recycled after totally dried via rehydration because of the high flexibility and reversibility of its dynamic bonds. Combining the strategies of topological stitching and direct bonding, Mfp-derived catechol and PEI/PAA backbone in PEI/PAADA corporately facilitated robust adhesion of universal materials with shear strength of up to 4.4 MPa and peeling strength of 870 J m-2, which is over 10 times greater than that of commercial fibrin gel. The adhesive also exhibited self-healing capability for at least 5 cycles, good stability in 1 M NaCl solution and characteristic debonding catalyzed by calcium. Moreover, in vitro cell behavior and in vivo wound healing assays suggested the potential of PEI/PAADA as wound dressing.

Mechanically Reinforced and Injectable Universal Adhesive Based on a PEI-PAA/Alg Dual-Network Hydrogel Designed by Topological Entanglement and Catechol Chemistry

Universal adhesion of hydrogels to diverse materials is essential to their extensive applications. Unfortunately, tough adhesion of wet surfaces remains an urgent challenge so far, requiring robust cohesion strength for effective stress dissipation. In this work, a dual-network hydrogel polyethylenimine-poly(acrylic acid)/alginate (PEI-PAA/Alg) with excellent mechanical strength is realized via PEI-PAA complex and calcium alginate coordination for universal adhesion by the synergistic effort of topological entanglement and catechol chemistry. The dual networks of PEI-PAA/Alg provide mechanically reinforced cohesion strength, which is sufficient for energy dissipation during adhesion with universal materials. After the integration of mussel-inspired dopamine into PAA or Alg, the adhesive demonstrates further improved adhesion performance with a solid adherend and capability to bond cancellous bones. Notably, the dopamine-modified adhesive exhibits better instant adhesion and reversibility with wet surfaces compared with commercial fibrin. Adhesion interfaces are investigated by SEM and micro-FTIR to verify the effectiveness of strategies of topological entanglement. Furthermore, the adhesive also possesses great injectability, stability, tissue adhesion, and biocompatibility. In vivo wound healing and histological analysis indicate that the hydrogel can promote wound closure, epidermis regeneration, and tissue refunctionalization, implying its potential application for bioadhesive and wound dressing.

Mussel-inspired polyurethane coating for bio-surface functionalization to enhance substrate adhesion and cell biocompatibility

Considerable implant materials are prone to cause a severe inflammatory reaction due to poor histocompatibility, which leads to various complications and implant failure. Surface coating modification of these implant materials is one of the most important techniques to settle this problem. However, fabricating a coating with both adequate adhesiveness and excellent biocompatibility remains a challenge. Inspired by the adhesion mechanism of mussels, a series of mussel-inspired polyurethanes (PU-LDAs) were synthysized through a step growth polymerization based on hexamethylene diisocyanate as a hard segment, polytetra-methylene-ether-glycol as a soft segment, lysine-dopamine (LDA) and butanediol as chain extenders with different mole ratios.The coatings of PU-LDAs were applied to various substrates, such as stainless steel, glass and PP using a facile one-step coating process. The introduction of 3,4-dihydroxyphenylalanine (DOPA) groups can greatly improve the adhesion ability of the coatings to the substrates demonstrated by a 180° peel test. The peel strength of the PU-LDA100 coating containing high LDA content was 76.3, 48.5 and 67.5 N/m, which was 106.2%, 246.4% and 192.2% higher than that of the PU-LDA00 coating without LDA on the surface of stainless steel, glass and PP, respectively. Meanwhile, this PU coating has a lower immune inflammatory response which provides a universal method for surface modification of implant materials. Moreover, the DOPA groups in PU-LDAs could combine with the amino and thiol groups on cell membrane surface, leading to the improvement of cell adhesion and growth. Therefore, it has great potential application in the field of biomedical implant materials for the clinic.

Mussel-Inspired, Injectable Polyurethane Tissue Adhesives Demonstrate In Situ Gel Formation under Mild Conditions

Tissue adhesives are widely desired in surgical wound closure and interfacial modification of medical devices. However, poor adhesive strength, low mechanical compliance, high costs, and biotoxicity of traditional adhesives limit their biomedical applications. In this work, we fabricated a class of mussel-inspired polyurethane adhesives (MPUAs) with robust properties, including in situ gel formation under mild conditions, accommodation of intricate wounds, strong adhesion, and good biocompatibility. Dopamine-modified lysine (LDA), as a chain extender, was incorporated into linear polyurethane as a crucial adhesive unit, and biologically sourced lysine was used as a mild curing agent for in situ gel. The premixed polyurethane adhesives can be fluently injected and can fill irregular and complicated defects. After mixing for several minutes, the adhesives can strongly bond multiple substrates, such as metallic materials, organic materials, and inorganic nonmetallic materials. In particular, they can strongly cohere the fresh (wet) biological tissues with a ductile interface, and the lap shear strength (24.5 ± 2.0 kPa) of the MPUAs was six times higher than that of the commercial fibrin glue. Moreover, the bursting pressure of MPUAs on the porcine aorta was 108.2 ± 3.8 mmHg, which can satisfy most of the surgical requirements (≤20 mmHg). Given its good biocompatibility, this system would provide potential applications in clinical surgery and biological coatings of medical devices.

Aptamer supported in vitro endothelialization of poly(ether imide) films

Implantation of synthetic small-diameter vascular bypass grafts is often associated with an increased risk of failure, due to thrombotic events or late intimal hyperplasia. As one of the causes an insufficient hemocompatibility of the artificial surface is discussed. Endothelialization of synthetic grafts is reported to be a promising strategy for creating a self-renewing and regulative anti-thrombotic graft surface. However, the establishment of a shear resistant cell monolayer is still challenging. In our study, cyto- and immuno-compatible poly(ether imide) (PEI) films were explored as potential biomaterial for cardiovascular applications. Recently, we reported that the initial adherence of primary human umbilical vein endothelial cells (HUVEC) was delayed on PEI-films and about 9 days were needed to establish a confluent and almost shear resistant HUVEC monolayer. To accelerate the initial adherence of HUVEC, the PEI-film surface was functionalized with an aptamer-cRGD peptide based endothelialization supporting system. With this functionalization the initial adherence as well as the shear resistance of HUVEC on PEI-films was considerable improved compared to the unmodified polymer surface. The in vitro results confirm the general applicability of aptamers for an efficient functionalization of substrate surfaces.

Establishing contact between cell-laden hydrogels and metallic implants with a biomimetic adhesive for cell therapy supported implants

For in-dwelling implants, controlling the biological interface is a crucial parameter to promote tissue integration and prevent implant failure. For this purpose, one possibility is to facilitate the establishment of the interface with cell-laden hydrogels fixed to the implant. However, for proper functioning, the stability of the hydrogel on the implant should be ensured. Modification of implant surfaces with an adhesive represents a promising strategy to promote the adhesion of a cell-laden hydrogel on an implant. Herein, we developed a peptidic adhesive based on mussel foot protein (L-DOPA-L-lysine)₂-L-DOPA that can be applied directly on the surface of an implant. At physiological pH, unoxidized (L-DOPA-L-lysine)₂-L-DOPA was supposed to strongly adhere to metallic surfaces but it only formed a very thin coating (less than 1 nm). Once oxidized at physiological pH, (L-DOPA-L-lysine)₂-L-DOPA forms an adhesive coating about 20 nm thick. In oxidized conditions, L-lysine can adhere to metallic substrates via electrostatic interaction. Oxidized L-DOPA allows the formation of a coating through self-polymerization and can react with amines so that this adhesive can be used to fix extra-cellular matrix based materials on implant surfaces through the reaction of quinones with amino groups. Hence, a stable interface between a soft gelatin hydrogel and metallic surfaces was achieved and the strength of adhesion was investigated. We have shown that the adhesive is non-cytotoxic to encapsulated cells and enabled the adhesion of gelatin soft hydrogels for 21 days on metallic substrates in liquid conditions. The adhesion properties of this anchoring peptide was quantified by a 180° peeling test with a more than 60% increase in peel strength in the presence of the adhesive. We demonstrated that by using a biomimetic adhesive, for the application of cell-laden hydrogels to metallic implant surfaces, the hydrogel/implant interface can be ensured without relying on the properties of the deposited biomaterials.

A Facile Strategy to Prepare an Enzyme-Responsive Mussel Mimetic Coating for Drug Delivery Based on Mesoporous Silica Nanoparticles

Surface functional mesoporous silica nanoparticles (MSNs) have been widely used as promosing materials for drug delivery. Herein, we reported a facile strategy to construct MSNs coated by enzyme-resposive polylysine-dopamine (PLDA) films through self-polymerization of dopamine derivative lysine-dopamine, in which the drug could be loaded and delivered efficiently. In detail, RhB or DOX was used as a drug model and loaded in functional MSNs via a one-pot procedure among MSNs, drug, and lysine-dopamine (LDA) under basic conditions. Owing to the fact that the peptide bonds between lysine and dopamine can be cleaved under triggering by pepsin, the resulting RhB/DOX@PLDA-MSNs exibit enzyme-responsive characterization. After the DOX@PLDA-MSNs enter into the cancer cells, the drug can be released effectively through degradation of peptide bonds under the influence of enzyme in cancer cells, which shows marked anticancer activity in vitro. This facile strategy may provide a new platform to construct enzyme-responsive controlled drug delivery systems.

Surface modification of a polyvinyl alcohol sponge with functionalized boronic acids to develop porous materials for multicolor emission, chemical sensing and 3D cell culture

Surface modification of a polyvinyl alcohol sponge with functionalized boronic acids led to the formation of porous materials applicable for multicolor emission, chemical sensing and 3D cell culture.

Smart surface coating of drug nanoparticles with cross-linkable polyethylene glycol for bio-responsive and highly efficient drug delivery

Many drug molecules can be directly used as nanomedicine without the requirement of any inorganic or organic carriers such as silica and liposome nanostructures. This new type of carrier-free drug nanoparticles (NPs) has great potential in clinical treatment because of its ultra-high drug loading capacity and biodegradability. For practical applications, it is essential for such nanomedicine to possess robust stability and minimal premature release of therapeutic molecules during circulation in the blood stream. To meet this requirement, herein, we develop GSH-responsive and crosslinkable amphiphilic polyethylene glycol (PEG) molecules to modify carrier-free drug NPs. These PEG molecules can be cross-linked on the surface of the NPs to endow them with greater stability and the cross-link is sensitive to intracellular environment for bio-responsive drug release. With this elegant design, our experimental results show that the liberation of DOX from DOX-cross-linked PEG NPs is dramatically slower than that from DOX-non-cross-linked PEG NPs, and the DOX release profile can be controlled by tuning the concentration of the reducing agent to break the cross-link between PEG molecules. More importantly, in vivo studies reveal that the DOX-cross-linked PEG NPs exhibit favorable blood circulation half-life (>4 h) and intense accumulation in tumor areas, enabling effective anti-cancer therapy. We expect this work will provide a powerful strategy for stabilizing carrier-free nanomedicines and pave the way to their successful clinical applications in the future.

Robust, self-healing hydrogels synthesised from catechol rich polymers

Catechol rich polymers yield robust, self-healing hydrogels.

Facile preparation of mussel-inspired polyurethane hydrogel and its rapid curing behavior

A facile method was found to incorporate a mussel-inspired adhesive moiety into synthetic polymers, and mussel mimetic polyurethanes were developed as adhesive hydrogels. In these polymers, a urethane backbone was substituted for the polyamide chain of mussel adhesive proteins, and dopamine was appended to mimic the adhesive moiety of adhesive proteins. A series of mussel mimetic polyurethanes were created through a step-growth polymerization based on hexamethylene diisocyanate as a hard segment, PEG having different molecular weights as a soft segment, and lysine-dopamine as a chain extender. Upon a treatment with Fe(3+), the aqueous mussel mimetic polyurethane solutions can be triggered by pH adjustment to form adhesive hydrogels instantaneously; these materials can be used as injectable adhesive hydrogels. Upon a treatment with NaIO4, the mussel mimetic polyurethane solutions can be cured in a controllable period of time. The successful combination of the unique mussel-inspired adhesive moiety with a tunable polyurethane structure can result in a new kind of mussel-inspired adhesive polymers.

Molecular diversity in phenolic and polyphenolic precursors of tannin-inspired nanocoatings

The strong interfacial properties of selected plant polyphenols were recently exploited in forming functionally versatile nanocoatings via dip-coating. Here, we screened a library of ~20 natural and synthetic phenols and polyphenols, identifying eight catechol-, gallol- and resorcinol-rich precursors capable of forming coatings. Several newly identified compounds expand the molecular diversity of tannin-inspired coatings.