Zingiberis rhizoma-based carbon dots alter serum oestradiol and follicle-stimulating hormone levels in female mice

Chinese herbs contain substances that regulate female hormones. Our study confirmed that Zingiberis rhizoma carbonisata contains Zingiberis rhizoma-based carbon dots (ZR-CDs), which exert regulatory effects on serum oestradiol and FSH in mice and show impacts on endometrial growth and follicular development that potentially affect the ability of female fertility. ZR-CDs were characterized to clarify the microstructure, optical features, and functional group characteristics. It shows that ZR-CDs are spherical carbon nanostructures ranging from 0.97 to 2.3 nm in diameter, with fluorescent properties and a surface rich in functional groups. We further investigated the impact of ZR-CDs on oestradiol and FSH in serum, growth, and the development of ovarian and uterine using normal female mice and exogenous oestradiol intervention model. It was observed that ZR-CDs accelerated oestrogen metabolism and attenuated oestradiol-induced endometrial hyperplasia. Simultaneously, ZR-CDs triggered an increase in FSH, even in the presence of high-serum oestradiol that inhibits FSH secretion. Our findings suggest that ZR-CDs could be a potential therapeutic treatment for anovulatory menstruation.

Reduced Volume Expansion of Micron-Sized SiOx via Closed-Nanopore Structure Constructed by Mg-Induced Elemental Segregation

The inherently huge volume expansion during Li uptake has hindered the use of Si-based anodes in high-energy lithium-ion batteries. While some pore-forming and nano-architecting strategies show promises to effectively buffer the volume change, other parameters essential for practical electrode fabrication, such as compaction density, are often compromised. Here we propose a new in situ Mg doping strategy to form closed-nanopore structure into a micron-sized SiOx particle at a high bulk density. The doped Mg atoms promote the segregation of O, so that high-density magnesium silicates form to generate closed nanopores. By altering the mass content of Mg dopant, the average radii (ranged from 5.4 to 9.7 nm) and porosities (ranged from 1.4 % to 15.9 %) of the closed pores are precisely adjustable, which accounts for volume expansion of SiOx from 77.8 % to 22.2 % at the minimum. Benefited from the small volume variation, the Mg-doped micron-SiOx anode demonstrates improved Li storage performance towards realization of a 700-(dis)charge-cycle, 11-Ah-pouch-type cell at a capacity retention of >80 %. This work offers insights into reasonable design of the internal structure of micron-sized SiOx and other materials that undergo conversion or alloying reactions with drastic volume change, to enable high-energy batteries with stable electrochemistry.

Separation and purification of fluorescent carbon dots - an unmet challenge

Literature reports demonstrate versatile optical applications of fluorescent carbon dots (CDs) in biological imaging, full-color solid-state lighting, optoelectronics, sensing, anticounterfeiting and so on. The fluorescence associated with CDs may originate significantly from byproducts generated during their synthesis, which need to be eliminated to achieve error-free results. The significance of purification, specifically for luminescence-based characterizations, is highly critical and imperative. Thus, there is a pressing demand to implement consistent and adequate purification strategies to reduce sample complexity and thereby realize reliable results that can provide a tactical steppingstone towards the advancement of CDs as next-generation optical materials. The article focuses on the mechanism of origin of fluorescence from CDs and further demonstrates the different purification approaches including dialysis, centrifugation, filtration, solvent extraction, chromatography, and electrophoresis that have been adopted by various researchers. Furthermore, the fundamental separation mechanism, as well as the advantages and limitations of each of these purification techniques are discussed. The article finally provides the critical challenges of these purification techniques that need to be overcome to obtain homogeneous CD fractions that demonstrate coherent and reliable optical features for suitable applications.

Carbon dots and their interactions with recognition molecules for enhanced nucleic acid detection

Carbon Dots (C-dots) have exceptional fluorescence and incident wavelength alteration capabilities because of their π-π* electron transitions between the surface-trapped charges. They have clear, considerate and cost-effective applications in the domain of bio-sensing, optical imaging, medical diagnostics, fluorescence chemotherapy, forensics, and environmentology. Advances in the production process of C-dots can change their optical and chemical characteristics, allowing them to interact with a variety of chemicals and ions that can be exploited for the DNA detection in point-of-care devices. In the current scenario of pathogenic disease prevention, metagenomics and industrial processes, alternative genetic material identification is critical. This review focuses on the existing carbon dots-based DNA detection technologies and their interactions with other components such as metallic salts, dyes, and biological chemicals based on their surface charge distribution (positive or negative) employed in the DNA diagnostic devices and biosensors with their operating mechanism regarding their target component. These intriguing scientific discoveries and technologies will be extensively examined to translate them into real-world solutions which will have a significant societal and economic impact on overall well-being and innovation.

Luminescence of carbon quantum dots and their application in biochemistry

Similar to fullerenes, carbon nanotubes and graphene, carbon dots (CDs) are causing a lot of research work in their own right. CDs are a type of surface-passivated quantum dot that contain carbon atoms. Their distinctive characteristics, such as luminescent emission that varies with size and wavelength, resistance to photobleaching, easy biological binding, lack of toxicity, and economical production without the need for intricate synthetic processes, have led to a noteworthy surge in attention within the research community. Different techniques can be utilized to create these CDs, spanning from basic candle burning to laser ablation. This review article delves into the principles of fluorescence technology, providing insights into how different synthesis methods of quantum dots impact their luminescent properties. Additionally, it highlights the latest applications of quantum dots in catalysis and biomedical fields, with special emphasis on the current status of luminescent properties in biology and chemistry. Towards the end, the article discusses the limitations of quantum dots in current practical applications, pointing out that CDs hold promising potential for future applications.

Carboxymethylcellulose reinforced starch films and rapid detection of spoiled beverages

The integrity of the packaging of a liquid foodstuff makes it difficult to detect spoilage. Therefore, it is important to develop a sensitive, fast and real-time material for liquid food detection. CMC, as lignocellulose derivatives and starch are widely used in the food industry. In this study, starch films with pH-responsive properties are successfully prepared from full-component starch and corn amylopectin (CA) by adding CMC. The effects of CMC on the mechanical properties, morphology characteristics, physical and chemical structures, stability and pH responsiveness of the starch films are analyzed. The starch/CMC-1.0 g composite films display good electrical conductivity and reduce the resistance of the composite film by two orders of magnitude. The composite films have pH response ability; in the simulation of orange juice spoilage experiment, the CA/CMC composite film has a more sensitive current response and was more suitable for the application to liquid food quality detection. Additionally, the starch/CMC composite films have potential applications for rapid detection and real-time monitoring of the safety of liquid food.

Photodegradation of oxolinic acid in aquaculture effluents under solar irradiation: is it possible to enhance efficiency by the use of TiO2/carbon quantum dots composites?

Antibiotics, such as oxolinic acid (OXA), in aquaculture effluents contribute to the dissemination of antimicrobial resistance, which makes it urgent to develop efficient and sustainable processes for their removal. Aiming a photocatalytic degradation under solar radiation, different carbon quantum dots (CQDs) were produced in this work through a bottom-up hydrothermal methodology and incorporated into TiO₂ by a simple calcination method. A total of thirteen materials were synthesized and tested for OXA photocatalytic removal from synthetic and real matrices. Among them, CQDs produced with citric acid and incorporated into TiO₂ at 4% (w/w) (TiO₂/CQDs-CA 4% (w/w)) were the most efficient photocatalysts, providing an OXA half-life time (t_1/2) decrease of 91%, 79% and 85% in phosphate buffer solution (PBS), synthetic sea salts (SSS) and brackish aquaculture effluent (BAE), respectively. Therefore, the herein synthesized TiO₂/CQDs-CA 4% (w/w) composites have shown to be promising materials for a sustainable solar-driven removal of antibiotics from aquaculture effluents.

Ion-Modified Starch Film Enables Rapid Detection of Spoiled Fruit Juices

Juice, as a liquid foodstuff, is subject to spoilage and damage due to complications during transport and storage. The appearance of intact outer packaging often makes spoilage and damage difficult to detect. Therefore, it of particular importance to develop a fast, real-time material to evaluate liquid foodstuffs. In this paper, starch films with pH response characteristics are successfully prepared by inorganic ion modification by utilizing whole starch and amylopectin as raw materials. The mechanical properties, stability properties, hydrophilic properties and pH electrical signal response indices of the films are analyzed and measured. The films exhibit good electrical conductivity values with 1.0 mL of ion addition (10 mmol/L), causing the composite film to respond sensitively to solutions with varying pH values. In the test of spoiled orange juice, the full-component corn starch (CS) film has more sensitive resistance and current responses, which is more conducive for applications in the quality monitoring of juice. The results indicate that modified starch films can potentially be applied in the real-time monitoring of the safety of liquid foodstuffs.

Structural-controlled formation of nano-particle hematite and their removal performance for heavy metal ions: A review

Hematite is ubiquitous in nature and holds great promise for a wide variety of applications in many frontiers of environmental issues such as heavy metal remediation in environment. Over the past decades, numerous efforts have been made to control and tailor the crystal structures of hematite to improve its adsorption performance for heavy metal ions (HMIs). It is now well established that the adsorption behavior of hematite nanocrystals is strongly affected by their particle sizes, crystal facet contributions, and defective structures. This review examined the size- and facet-dependent hematite, as well as the defective hematite according to their fabrication methods and growth mechanisms. Furthermore, the adsorption performance of various hematite particles for HMIs were introduced and compared to clarify the structure-active relationships of hematite. We also overviewed the advances in charge distribution (CD)-multisite complexation (MUSIC) modeling studies about the HMIs adsorption at the hematite-water interface and the binding parameters. The Present review systematically describes how the formation conditions impact the structural and surface properties of hematite particles, thereby providing new strategies for enhancing the performance of hematite for environmental remediation.

Carbon Dots: An Excellent Fluorescent Probe for Contaminant Sensing and Remediation

Pollution-induced degradation of the environment is a serious problem for both developing and developed countries. Existing remediation methods are restricted, necessitating the development of novel remediation technologies. Nanomaterials with unique characteristics have recently been developed for remediation. Quantum dots (QDs) are semiconductor nanoparticles (1-10 nm) with optical and electrical characteristics that differ from bigger particles owing to quantum mechanics, making them intriguing for sensing and remediation applications. Carbon dots (CDs) offer better characteristics than typical QDs, such as, CdSe QDs in terms of contaminant sensing and remediation. Non-toxicity, chemical inertness, photo-induced electron transfer, good biocompatibility, and adjustable photoluminescence behavior are all characteristics of CDs. CDs are frequently made from sustainable raw materials as they are cost-effective, environmentally compactable, and excellent in reducing waste generation. The goal of this review article is to briefly describe CDs fabrication methods, to deeply investigate the criteria and properties of CDs that make them suitable for sensing and remediation of contaminants, and also to highlight recent advances in their use in sensing and remediation of contaminants.

A Review on Carbon Quantum Dot Based Semiconductor Photocatalysts for the Abatement of Refractory Pollutants

Photocatalysis is a green approach frequently utilised to eliminate a variety of environmentally hazardous refractory pollutants. Accordingly, the modification of semiconductor photocatalysts with Carbon Quantum Dots (CQDs) is of great importance for the treatment of such pollutants due to their attractive physical and chemical properties. CQDs are a perfect candidate to handle photocatalysts of high-performance since they operate as co-catalysts and as visible light harvesters. The higher separation rate of electron-hole pairs in the photocatalytic system is attributable to better photodegradation efficiency. This review classifies CQD based photocatalysts as pure, doped and composite materials and discusses the specific advantages of CQDs in visible light-driven photocatalysis. In this work, the versatile roles of CQDs in CQD-based photocatalytic systems are thoroughly discussed and s u mmarised.

Optical properties and photoactivity of carbon nanodots synthesized from olive solid wastes at different carbonization temperatures

Carbon nanodots (CNDs) have many fascinating properties, such as optical properties (UV-Visible absorption and fluorescence emission), which make them good candidates in many applications, such as photocatalysts for the degradation of several organic pollutants. This study aims to synthesize CNDs from olive solid wastes at different carbonization temperatures from 300 to 900 °C and study the effect on the optical properties of the CNDs, such UV-Vis, fluorescence, quantum yield, and energy bandgap, in addition to the influence on the photoactivity of the CNDs as photocatalysts for the degradation of methylene blue (MB). CNDs were prepared from olive solid wastes (OSWs) by pyrolysis at different temperatures (300-900 °C) for conversion to carbonized material, and then oxidized chemically in the presence of hydrogen peroxide (H2O2). It was found that an increase in the carbonization temperature of the OSWs leads to an increase in the product yield with a maximum value at 500 °C, and it then decreased dramatically. On the other hand, a decrease in fluorescence due to the diminishment of oxygen groups and the destruction of the surface of the CNDs was observed. The higher quantum yield (5.17%) and bandgap (2.77 eV) were achieved for CNDs prepared from OSWs that carbonized at 300 °C. The rate and degradation efficiency of MB were studied with the different synthesized CNDs, and it was found that an increase in the carbonization temperature leads to a decrease in the rate and degradation efficiency of MB, with the highest degradation rate of 0.0575 min-1 and degradation efficiency of 100% after 120 minutes of light irradiation being realized for the sample carbonized at 300 °C.

Photodegradation of Aquaculture Antibiotics Using Carbon Dots-TiO2 Nanocomposites

In this work, carbon dots (CD) were synthesized and coupled to titanium dioxide (TiO₂) to improve the photodegradation of antibiotics in aquaculture effluents under solar irradiation. Oxolinic acid (OXA) and sulfadiazine (SDZ), which are widely used in aquaculture, were used as target antibiotics. To prepare nanocomposites of CD containing TiO₂, two modes were used: in-situ (CD@TiO₂) and ex-situ (CD/TiO₂). For CD synthesis, citric acid and glycerol were used, while for TiO₂ synthesis, titanium butoxide was the precursor. In ultrapure water (UW), CD@TiO₂ and CD/TiO₂ showed the largest photocatalytic effect for SDZ and OXA, respectively. Compared with their absence, the presence of CD@TiO₂ increased the photodegradation of SDZ from 23 to 97% (after 4 h irradiation), whereas CD/TiO₂ increased the OXA photodegradation from 22 to 59% (after 1 h irradiation). Meanwhile, in synthetic sea salts (SSS, 30‰, simulating marine aquaculture effluents), CD@TiO₂ allowed for the reduction of SDZ’s half-life time (t_1/2) from 14.5 ± 0.7 h (in absence of photocatalyst) to 0.38 ± 0.04 h. Concerning OXA in SSS, the t_1/2 remained the same either in the absence of a photocatalyst or in the presence of CD/TiO₂ (3.5 ± 0.3 h and 3.9 ± 0.4 h, respectively). Overall, this study provided novel perspectives on the use of eco-friendly CD-TiO₂ nanocomposites for the removal of antibiotics from aquaculture effluents using solar radiation.

α-Fe2O3-based nanocomposites: synthesis, characterization, and photocatalytic response towards wastewater treatment

Recently, rising distress over ecological pollution owing to water contamination by coloring effluents primarily due to dyes is of growing concern. The development of semiconductor/magnetic oxide-based nanomaterials has verified to be a potent remediation means for water pollution. In the present article, the fabrication of nanocomposites was carried out by the facile hydrothermal method. The ZnO and ZnSe nanoparticles were in situ formed on the α-Fe₂O₃ layer, thereby forming a heterojunction. The prepared α-Fe₂O₃/ZnSe nanocomposite possessed a degradation of 98.9% for a Congo red aqueous solution of 100 ppm. The α-Fe₂O₃/ZnO nanocomposite showed only 26% degradation of 100 ppm dye solution depicting a poor photocatalytic performance. This is attributed to the formation of recombination-enhanced configuration (type-I heterostructure) in the α-Fe₂O₃/ZnO nanocomposite (NC). In contrast, α-Fe₂O₃/ZnSe NC accomplished a higher and enhanced photocatalytic response. The key rationale for elevated photocatalytic response is the establishment of a recombination-free configuration (type-II heterostructure). Thus, α-Fe₂O₃/ZnSe NC known as one of outstanding nanoparticle-nanocomposite photocatalysts was synthesized under mild conditions exclusive of some multifaceted post-treatment, for dye abatement process.

In situ preparation of visible-light-driven carbon quantum dots/NaBiO3 hybrid materials for the photoreduction of Cr(VI)

In this study, different carbon quantum dots (CQDs)/NaBiO₃ hybrid materials were synthesized as photocatalysts to effectively utilize visible light for the photocatalytic degradation of contaminants effectively. These hybrid materials exhibit an enhanced photocatalytic reduction of hexavalent chromium (Cr(VI)) in the aqueous medium. Zero-dimensional nanoparticles of CQDs were embedded within the two-dimensional NaBiO₃ nanosheets by the hydrothermal process. Compared with that of the pure NaBiO₃ nanosheets, the photocatalytic performance of the hybrid catalysts was significantly high and 6 wt.% CQDs/NaBiO₃ catalyst exhibited better photocatalytic performance. We performed the first-principles density functional theory calculations to study the interfacial properties of pure NaBiO₃ nanosheets and hybrid photocatalysts, and confirmed the CQDs played an important role in the CQDs/NaBiO₃ composites. The experimental results indicated that the enhanced reduction of Cr(VI) was probably due to the high loading of CQDs (electron acceptor) on NaBiO_3, which made NaBiO₃ nanomaterials to respond in visible light and significantly improved their electron-hole separation efficiency.

Synthesis and characterization of an α-Fe2O3/ZnTe heterostructure for photocatalytic degradation of Congo red, methyl orange and methylene blue

The leading challenge towards environmental protection is untreated textile dyes. Tailoring photocatalytic materials is one of the sustainable remediation strategies for dye treatment. Hematite (α-Fe2O3), due to its favorable visible light active band gap (i.e. 2.1 eV), has turned out to be a robust material of interest. However, impoverished photocatalytic efficiency of α-Fe2O3 is ascribable to the short life span of the charge carriers. Consequently, the former synthesized heterostructures possess low degradation efficiency. The aim of the proposed endeavor is the synthesis of a novel zinc telluride-modified hematite (α-Fe2O3/ZnTe) heterostructure, its characterization and demonstration of its enhanced photocatalytic response. The promising heterostructure as well as bare photocatalysts were synthesized via a hydrothermal approach. All photocatalysts were characterized by the X-ray diffraction technique (XRD), scanning electron microscopy (SEM), and electron diffraction spectroscopy (EDX). Moreover, the selectivity and activity of the photocatalyst are closely related to the alignment of its band energy levels, which were estimated by UV-Vis diffuse reflectance spectroscopy (DRS) and X-ray photoelectron spectroscopy (XPS). Nanomaterials, specifically α-Fe2O3 and α-Fe2O3/ZnTe, were used for the degradation of Congo red (97.9%), methyl orange (84%) and methylene blue (73%) under light irradiation (>200 nm) for 60 min. The results suggested that with the aforementioned optimized fabricated heterostructure, the degradation efficiency was improved in comparison to bare hematite (α-Fe2O3). The key rationale towards such improved photocatalytic response is the establishment of a type-II configuration in the α-Fe2O3/ZnTe heterostructure.

Hybrid FeNiOOH/α-Fe2O3/Graphene Photoelectrodes with Advanced Water Oxidation Performance

In this study, the photoelectrochemical behavior of electrodeposited FeNiOOH/Fe2O3/graphene nanohybrid electrodes is investigated, which has precisely controlled structure and composition. The photoelectrode assembly is designed in a bioinspired manner where each component has its own function: Fe2O3 is responsible for the absorption of light, the graphene framework for proper charge carrier transport, while the FeNiOOH overlayer for facile water oxidation. The effect of each component on the photoelectrochemical behavior is studied by linear sweep photovoltammetry, incident photon-to-charge carrier conversion efficiency measurements, and long-term photoelectrolysis. 2.6 times higher photocurrents are obtained for the best-performing FeNiOOH/Fe2O3/graphene system compared to its pristine Fe2O3 counterpart. Transient absorption spectroscopy measurements reveal an increased hole-lifetime in the case of the Fe2O3/graphene samples. Long-term photoelectrolysis measurements in combination with Raman spectroscopy, however, prove that the underlying nanocarbon framework is corroded by the photogenerated holes. This issue is tackled by the electrodeposition of a thin FeNiOOH overlayer, which rapidly accepts the photogenerated holes from Fe2O3, thus eliminating the pathway leading to the corrosion of graphene.

Band gap tuning and surface modification of carbon dots for sustainable environmental remediation and photocatalytic hydrogen production - A review

Energy and water are the two major issues facing the modern mankind. Providing freshwater requires energy and producing energy uses water. In the present-day scenario, both these routes face growing problems and limitations. Energy crisis has risen due to the depletion of fossil fuels that cause pollution to water bodies making the water unusable for human consumption. In this regard, semiconductor nanocrystals with luminescent properties or carbon quantum dots (CQDs) are the newly developed nanomaterials whose distinctive photo-physical characteristics are focusing to a new generation of robust materials and sensors for sustainable development. In this review, advances in surface and band gap modification of CQDs to improve the activity of nanomaterials will be discussed with special reference to some specific CQDs exhibiting special optical properties for water treatment/splitting applications. Recent advances on CQDs nanocomposites including their applications in photodegradation of organic pollutants, sensing of heavy metal ions in water and water splitting are discussed critically to narrate the future prospects in this field. Challenges and limitations for further improvement are covered to provide smart choices for creating sustainability of benign environment and economic benefits.

Enhanced photocatalytic performance by hybridization of Bi2WO6 nanoparticles with honeycomb-like porous carbon skeleton

In this work, we have assembled Bi₂WO₆ nanoparticles on the surface of honeycomb-like porous carbon skeleton (PCS) via a hydrothermal route to achieve a new type of PCS@Bi₂WO₆ hybrid composite photocatalysts. The PCS@Bi₂WO₆ hybrid structures are determined by SEM, TEM and XPS characterizations. UV-vis DRS investigation suggests an enhanced visible-light absorption of the PCS@Bi₂WO₆ composites. Transient photocurrent response, EIS and PL spectroscopy characterizations demonstrate that the composites exhibit an efficient separation of photoproduced electron/hole pairs. The photocatalytic performance of the composites were evaluated by using RhB as the model pollutant and simulated sunlight as the light source. It is revealed that the PCS@Bi₂WO₆ hybrid composites manifest much enhanced photocatalytic performance. The 5 wt%PCS@Bi₂WO₆ composite manifests the highest photocatalytic activity, which is ca. 2.1 times as large as that of bare Bi₂WO₆ nanoparticles. This can be mainly ascribed to two factors: (1) The photogenerated electron/hole pairs in Bi₂WO₆ are efficiently separated due to the electron transfer between Bi₂WO₆ and PCS; and (2) PCS induces enhanced visible-light absorption and the visible-light-excited electrons in PCS could also take part in the photocatalytic reactions.

Study on heterogeneous photocatalytic ozonation degradation of ciprofloxacin by TiO2/carbon dots: Kinetic, mechanism and pathway investigation

In this study, the objective was mainly focusing on the mechanism investigation of ciprofloxacin (CIP) degradation by photocatalytic ozonation process which carried out by ozone and TiO₂ with a low content of carbon-dots (CDs) under simulated sunlight irradiation. The physicochemical properties of the prepared photocatalysts were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscope (SEM) X-ray photoelectron spectroscopy (XPS) and zeta potential. Comprehensive investigation has proven the process to be efficient in the removal of CIP with high yield of reactive species (OH, O₂^-, h⁺, etc.). Kinetic model on pH investigation found out a repulsive force between the photocatalysts and CIP intensified with the increasing pH, so did the production rate of hydroxyl radicals (OH), while eventually reached a balance and achieved a maximum degradation rate. The results indicated that the enhancement mechanism was triggered by the photoexcited electron accumulated on CDs and transferred by ozone, resulting in the continuous generation of h+, O₃^- and O₂^-. Possible photocatalytic ozonation degradation pathways of CIP were proposed according to the identifications of intermediates using high-resolution accurate-mass spectrometry (HRAM) LC-MS/MS.

Cotransformation of Carbon Dots and Contaminant under Light in Aqueous Solutions: A Mechanistic Study

In this study, the photochemistry of carbon dots (CDs) and their effects on pollutant transformation were systematically examined. Diethyl phthalate (DEP) degradation was strongly enhanced by CDs under UV light, with the observed reaction rate constant ( k_obs) increased by 2.4-15.1-fold by CDs at a concentration of 0.5-10 mg/L. Electron paramagnetic resonance (EPR) spectrometry combined with free radical quenching experiments with various chemical probes indicated the production of reactive oxygen species (ROS), including hydroxyl radicals (^•OH), singlet oxygen (¹O₂), and superoxide radical anions (O₂^•-), and these contributed to the enhanced DEP degradation. Meanwhile, CDs were also degraded to low-molecular-weight species and partially mineralized to CO₂ by ROS, as evidenced by Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS) and total organic carbon (TOC) analysis, and transformation of CDs was accelerated by DEP. Furthermore, CDs were degraded rapidly under natural sunlight, accompanied by the formation of ^•OH and ¹O₂. Anions such as CO₃^2-, NO₃^-, and Cl^- had limited effects on transformation of CDs, while humic substances greatly inhibited this process. Our results indicate that photoreactions of CDs play an important role in influencing the transformation of pollutants and CDs themselves in the natural aquatic environment. The findings provide invaluable information for evaluating risks associated with the release of CDs into the natural environment.

Carbon Dots-Decorated Bi2WO6 in an Inverse Opal Film as a Photoanode for Photoelectrochemical Solar Energy Conversion under Visible-Light Irradiation

This work focuses on the crystal size dependence of photoactive materials and light absorption enhancement of the addition of carbon dots (CDs). mac-FTO (macroporous fluorine-doped tin oxide) films with an inverse opal structure are exploited to supply enhanced load sites and to induce morphology control for the embedded photoactive materials. The Bi₂WO₆@mac-FTO photoelectrode is prepared directly inside a mac-FTO film using a simple in situ synthesis method, and the application of CDs to the Bi₂WO₆@mac-FTO is achieved through an impregnation assembly for the manipulation of light absorption. The surface morphology, chemical composition, light absorption characteristics and photocurrent density of the photoelectrode are analyzed in detail by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), UV–vis diffuse reflectance spectra (DRS), Energy dispersive X-ray analysis (EDX) and linear sweep voltammetry (LSV).

Growth Process and CQDs-modified Bi₄Ti₃O12 Square Plates with Enhanced Photocatalytic Performance

Bi₄Ti₃O12 square plates were synthesized via a hydrothermal route, and their growth process was systematically investigated. Carbon quantum dots (CQDs) were prepared using glucose as the carbon source, which were then assembled on the surface of Bi₄Ti₃O12 square plates via a hydrothermal route with the aim of enhancing the photocatalytic performance. XRD (X-ray powder diffraction), SEM (scanning electron microscopy), TEM (transmission electron microscopy), UV-vis DRS (diffuse reflectance spectroscopy), XPS (X-ray photoelectron spectroscopy), FTIR (Fourier transform infrared spectroscopy), PL (photoluminescence) spectroscopy, EIS (electrochemical impedance spectroscopy) and photocurrent spectroscopy were used to systematically characterize the as-prepared samples. It is demonstrated that the decoration of CQDs on Bi₄Ti₃O12 plates leads to an increased visible light absorption, slightly increased bandgap, increased photocurrent density, decreased charge-transfer resistance, and decreased PL intensity. Simulated sunlight and visible light were separately used as a light source to evaluate the photocatalytic activity of the samples toward the degradation of RhB in aqueous solution. Under both simulated sunlight and visible light irradiation, CQDs@Bi₄Ti₃O12 composites with an appropriate amount of CQDs exhibit obviously enhanced photocatalytic performance. However, the decoration of excessive CQDs gives rise to a decrease in the photocatalytic activity. The enhanced photocatalytic activity of CQDs-modified Bi₄Ti₃O12 can be attributed to the following reasons: (1) The electron transfer between Bi₄Ti₃O12 and CQDs promotes an efficient separation of photogenerated electron/hole pairs in Bi₄Ti₃O12; (2) the up-conversion photoluminescence emitted from CQDs could induce the generation of additional electron/hole pairs in Bi₄Ti₃O12; and (3) the photoexcited electrons in CQDs could participate in the photocatalytic reactions.

Visible-light-driven CQDs@MIL-125(Ti) nanocomposite photocatalyst with enhanced photocatalytic activity for the degradation of tetracycline

In the present study, a novel photocatalyst, CQDs@MIL-125(Ti) (CQDs = carbon quantum dots), was prepared via a solvothermal procedure. The photocatalytic properties were tested by the degradation of tetracycline (TC) with a 250 W Xe lamp (λ > 420 nm). Compared with pure MIL-125(Ti), the 10 wt% CQDs@MIL-125(Ti) photocatalyst can significantly improve the degradation process of TC, and the degradation efficiency can reach 90% within 4 h. The enhancement in the photocatalytic performance is due to the CQDs, which can promote the absorption of visible light and also efficiently accelerate the separation of photogenerated electron–hole pairs. We have also demonstrated that superoxide radicals (·O₂⁻) and holes (h⁺) play crucial roles in the photocatalytic degradation of TC through capture experiments. The current work provides a new idea for constructing high-efficiency photocatalysts based on MIL-125(Ti).

A novel CQDs@MIL-125(Ti) photocatalyst had been synthesized by a facile solvothermal process for the degradation of TC. The possible degradation mechanism was proposed based on the active species trapping experiments.

Bright carbon dots via inner filter effect for the sensitive determination of the purine metabolic disorder in human fluids

In this paper, the high performance fluorescent carbon dots were synthesized with maleic acid, tris and benzoic acid as raw materials by one-step hydrothermal method. The obtained carbon dots with uniform size emitted strong blue fluorescence, which the maximum excitation and emission wavelengths at 250 nm and 415 nm, respectively. Under the optimum condition, it was meaningfully founded that the reaction between the carbon dots and uric acid resulting in the fluorescence quenching of the carbon dots at the emission spectrum of 415 nm. The reason was that they had a synergistic effect between the fluorescence internal filtering effect and the static quenching effect. The fluorescence internal filter effect sensing system was constructed by using uric acid as the absorbable material and carbon dots as the luminophore. Hence, a fluorescence quenching method for the determination of uric acid was established in the concentration range from 5.0 to 400 μM with the detection limit (3σ/S) of 2.26 μM. Thus, a fluorescent sensing assay for the determination of uric acid was founded and confirmed in human fluids.

The Research Development of Quantum Dots in Electrochemical Energy Storage

Quantum dots, which are made from semiconductor materials, possess tunable physical dimensions and outstanding optoelectronic characteristics, and they have aroused widespread interest in recent years. In addition to applications in biomolecular analysis, sensors, organic photovoltaic devices, fluorescence, solar cells, photochemical reagents, light-emitting diodes, and catalysis, quantum dots have attracted mounting attention in the field of electrochemical energy storage owing to their size confinement and anisotropic geometry. In this review, a comprehensive summary is given and the research progress of the study of quantum dots for batteries and electrochemical capacitors in recent years, including their synthesis methods, micro/nanostructural features, and electrochemical performance, is appraised.