Using fluorine-containing amphiphilic random copolymers to manipulate the quantum yields of aggregation-induced emission fluorophores in aqueous solutions and the use of these polymers for fluorescent bioimaging

Aggregation-Induced Emission-Active Biomacromolecules: Progress, Challenges, and Opportunities

Biomacromolecules featuring aggregation-induced-emission (AIE) characteristics generally present new properties and performances that are silent in the molecular state, providing endless possibilities for the evolution of biomedical applications. Tremendous achievements based on the research of AIE-active biomacromolecules have been made in synthetic exploration, material development, and practical applications. In this Perspective, we give a brief account in the development of AIE-active biomacromolecules. Remarkable progresses have been made in the exploration of AIE-active biomacromolecule preparation, structure-property relationships, and the relevant biomedical applications. The existing challenges and promising opportunities, as well as the future directions in AIE-active biomacromolecule research, are also discussed. It is expected that this Perspective can act as a trigger for the innovation of AIE-active biomacromolecule research and aggregate science.

19 F MRI Nanotheranostics for Cancer Management: Progress and Prospects

Fluorine magnetic resonance imaging (19 F MRI) is a promising imaging technique for cancer diagnosis because of its excellent soft tissue resolution and deep tissue penetration, as well as the inherent high natural abundance, almost no endogenous interference, quantitative analysis, and wide chemical shift range of the 19 F nucleus. In recent years, scientists have synthesized various 19 F MRI contrast agents. By further integrating a wide variety of nanomaterials and cutting-edge construction strategies, magnetically equivalent 19 F atoms are super-loaded and maintain satisfactory relaxation efficiency to obtain high-intensity 19 F MRI signals. In this review, the nuclear magnetic resonance principle underlying 19 F MRI is first described. Then, the construction and performance of various fluorinated contrast agents are summarized. Finally, challenges and future prospects regarding the clinical translation of 19 F MRI nanoprobes are considered. This review will provide strategic guidance and panoramic expectations for designing new cancer theranostic regimens and realizing their clinical translation.

Polymersomes with a smectic liquid crystal structure and AIE fluorescence

Fluorescent smectic polymersomes with aggregation-induced emission are prepared from an amphiphilic block copolymer containing a liquid crystal hydrophobic block and a tetraphenylethene-bearing unit between hydrophilic and hydrophobic blocks.

Size-tunable fluorescent dendrimersomes via aggregation-induced emission

Tetraphenylethylene-functionalized amphiphilic Janus dendrimers of up to third generation are synthesized. Their self-assembly has been studied under kinetic and thermodynamic control. By varying the dendrimer generation number and the self-assembly condition, fluorescent dendrimersomes of tunable size (∼60-200 nm) and quantum yield (5.7-17.4%) are obtained in aqueous medium.

Bay Leaf Extract-Based Near-Infrared Fluorescent Probe for Tissue and Cellular Imaging

The development of fluorescence dyes for near-infrared (NIR) fluorescence imaging has been a significant interest for deep tissue imaging. Among many imaging fluoroprobes, indocyanine green (ICG) and its analogues have been used in oncology and other medical applications. However, these imaging agents still experience poor imaging capabilities due to low tumor targetability, photostability, and sensitivity in the biological milieu. Thus, developing a biocompatible NIR imaging dye from natural resources holds the potential of facilitating cancer cell/tissue imaging. Chlorophyll (Chl) has been demonstrated to be a potential candidate for imaging purposes due to its natural NIR absorption qualities and its wide availability in plants and green vegetables. Therefore, it was our aim to assess the fluorescence characteristics of twelve dietary leaves as well as the fluorescence of their Chl extractions. Bay leaf extract, a high-fluorescence agent that showed the highest levels of fluorescence, was further evaluated for its tissue contrast and cellular imaging properties. Overall, this study confirms bay-leaf-associated dye as a NIR fluorescence imaging agent that may have important implications for cellular imaging and image-guided cancer surgery.

19 F MRI Probes for Multimodal Imaging*

Magnetic resonance imaging (MRI) is one of the most powerful imaging tools today, capable of displaying superior soft-tissue contrast. This review discusses developments in the field of ¹⁹ F MRI multimodal probes in combination with optical fluorescence imaging (OFI), ¹ H MRI, chemical exchange saturation transfer (CEST) MRI, ultrasonography (USG), X-ray computed tomography (CT), single photon emission tomography (SPECT), positron emission tomography (PET), and photoacoustic imaging (PAI). In each case, multimodal ¹⁹ F MRI probes compensate for the deficiency of individual techniques and offer improved sensitivity or accuracy of detection over unimodal counterparts. Strategies for designing ¹⁹ F MRI multimodal probes are described with respect to their structure, physicochemical properties, biocompatibility, and the quality of images.

Recent advances in assembled AIEgens for image-guided anticancer therapy

Image-guided therapy, with simultaneous imaging and therapy functions, has the potential to greatly enhance the therapeutic efficacy of anticancer therapy, and reduce the incidence of side effects. Fluorescence imaging has the advantages of easy operation, abundant signal, high contrast, and fast response for real-time and non-invasive tracking. Luminogens with aggregation-induced emission characteristics (AIEgens) can emit strong luminescence in an aggregate state, which makes them ideal materials to construct applicative fluorophores for fluorescence imaging. The opportunity for image-guided cancer treatment has inspired researchers to explore the theranostic application of AIEgens combined with other therapy methods. In recent years, many AIEgens with efficient photosensitizing or photothermal abilities have been designed by precise molecular engineering, with superior performance in image-guided anticancer therapy. Owing to the hydrophobic property of most AIEgens, an assembly approach has been wildly utilized to construct biocompatible AIEgen-based nanostructures in aqueous systems, which can be used for image-guided anticancer therapy. In the present review, we summarize the recent advances in the assembled AIEgens for image-guided anticancer therapy. Five types of image-guided anticancer therapy using assembled AIEgens are included: chemotherapy, photodynamic therapy, photothermal therapy, gene therapy, and synergistic therapy. Moreover, a brief conclusion with the discussion of current challenges and future perspectives in this area is further presented.

Colorimetric recognition of aromatic amino acid enantiomers by gluconic acid-capped gold nanoparticles

In this work, we prepared gold nanoparticles (AuNPs) by employing gluconic acid (GlcA) as reducing-cum-stabilizing agent. The proposed GlcA-AuNPs successfully worked as a colorimetric sensor for visual chiral recognition of aromatic amino acid enantiomers, namely tyrosine (D/L-Tyr), phenylalanine (D/L-Phe), and tryptophan (D/L-Trp). After adding L-types to GlcA-AuNPs solution, the color of the mixture changed from red to purple (or gray), while no obvious color change occurred on the addition of D-types. The effect can be detected by naked eyes. The particles have been characterized by transmission electron microscopy, Fourier-transform infrared spectroscopy, zeta potential, the dynamic light scattering analysis as well as UV-Vis spectroscopy. This assay can be used to determine the enantiomeric excess of L-Trp in the range from 0 to + 100%. The method has advantages in simplicity, sensitivity, fast response, and low cost.

Biomass-Based Polymer Nanoparticles With Aggregation-Induced Fluorescence Emission for Cell Imaging and Detection of Fe3+ Ions

Polymeric nanoparticles, which show aggregation-induced luminescence emission, have been successfully prepared from larch bark, a natural renewable biomass resource, in a simple, rapid ultrasonic fragmentation method. The structure, element, particle size and molecular weight distribution of larch bark extracts (LBE) were studied by FTIR, XPS, TEM, XRD and linear mode mass spectrometry, respectively. LBE was found containing large numbers of aromatic rings, displaying an average particle size of about 4.5 nm and mainly presenting tetramers proanthocyanidins. High concentration, poor solvent, low temperature and high viscosity restricted the rotation and vibration of the aromatic rings in LBE, leading to the formation of J-aggregates and enhancing the aggregation-induced fluorescence emission. LBE possessed good resistance to photobleaching under ultraviolet light (200 mW/m²). Cytotoxicity experiments for 24 h and flow cytometry experiments for 3 days proved that even the concentrations of LBE as high as 1 mg/mL displayed non-toxic to MG-63 cells. Therefore, LBE could be employed for MG-63 cell imaging, with similar nuclear staining to the DAPI. The effects of different metal ions on the fluorescence emission intensity of LBE were analyzed and exhibited that Fe³⁺ owned obvious fluorescence quenching effect on LBE, while other metal ions possessed little or weak effect. Furthermore, the limit of detection (LOD) of Fe³⁺ was evaluated as 0.17 μM.

Aggregation-Induced Emission Active Polyacrylates via Cu-Mediated Reversible Deactivation Radical Polymerization with Bioimaging Applications

The introduction of aggregation-induced emission (AIE) moieties into polymers results in smart materials with AIE characteristics, expanding their scope of applications. Herein, well-defined polymers with controlled molecular weight, low dispersity, and high end-group fidelity are produced via copper(0)-mediated reversible-deactivation radical polymerizations (Cu(0)-RDRPs). An AIE-containing initiator tetraphenylethene bromoisobutyrate (TPEBIB) has been synthesized, fully characterized, and utilized for the construction of different polyacrylate homopolymers and block copolymers bearing the TPE group with a range of molecular weights and architectures. All of the polymers exhibited AIE behavior. Notably, the hydrophobic TPE-poly(tert-butyl acrylate) (TPE-PtBA)-containing block copolymers are transformed to TPE-poly(acrylic acid) (TPE-PAA)-based amphiphilic copolymers by facile deprotection, enabling pH-tunable self-assembly in aqueous media to give fluorescent nanoparticles with various sizes. The low cytotoxicity, high specificity, and excellent photostability render them promising candidates as lysosome-specific probes in biological imaging applications.

Novel fluorescein polymer-based nanoparticles: facile and controllable one-pot synthesis, assembly, and immobilization of biomolecules for application in a highly sensitive biosensor

A key aspect of biochip and biosensor preparation is optimization of the optical or electrochemical techniques that combine high sensitivity and specificity. Among them, optical techniques such as the use of fluorescent polymeric nanoparticles have resulted in dramatic progress in the field of diagnostics due to their range of advantages. We herein report a facile approach for the development of novel fluorescein polymeric nanoparticles (FPNPs) with immobilization of specific biomolecules for application in a highly sensitive optical biosensor. A series of three amphiphilic fluorescein polymers (poly(FMA-r-NAS-r-MA)), comprising hydrophobic fluorescein O-methacrylate (FMA), hydrophilic N-acryloxysuccinimide (NAS), and methacrylic acid (MA) monomers were synthesized through radical polymerization. In an aqueous environment, these fluorescein polymers self-assembled into spherical shaped nanoparticles with a well-defined particle size, narrow particle size distribution, and enhanced fluorescence properties. The bio-immobilization properties of the FPNPs were also tunable by control of the activated N-hydroxysuccinimide ester group in the polymer series. Furthermore, the fluorescence sensitivity of bovine serum albumin detection by the FPNPs indicates that the limit of detection and sensitivity were improved compared to conventional fluorescence dye-labelled proteins. These novel FPNPs therefore represent a suitable technology for disease diagnosis and biomarker detection to ultimately improve the sensitivity of existing analytical methodologies in a facile and cost-effective manner.

We report a facile approach for the development of novel fluorescein polymeric nanoparticles (FPNPs) with immobilization of specific biomolecules for application in a highly sensitive optical biosensor.

Nanomedicines for Near-Infrared Fluorescent Lifetime-Based Bioimaging

Nanomedicines refer to the application of nanotechnology in disease diagnosis, treatment, and monitoring. Bioimaging provides crucial biological information for disease diagnosis and treatment monitoring. Fluorescent bioimaging shows the advantages of good contrast and a vast variety of signal readouts and yet suffers from imaging depth due to the background noise from the autofluorescence of tissue and light scattering. Near-infrared fluorescent lifetime bioimaging (NIR- FLTB) suppresses such background noises and significantly improves signal-to-background ratio. This article gives an overview of recent advances in NIR- FLTB using organic compounds and nanomaterials as contrast agent (CA). The advantages and disadvantages of each CA are discussed in detail. We survey relevant reports about NIR-FLTB in recent years and summarize important findings or progresses. In addition, emerging hybrid bioimaging techniques are introduced, such as ultrasound-modulated FLTB. The challenges and an outlook for NIR- FLTB development are discussed at the end, aiming to provide references and inspire new ideas for future nanomedicine development.

Fluorescent Polymersomes with Aggregation-Induced Emission

Fluorescent polymersomes are interesting systems for cell/tissue imaging and in vivo study of drug distribution and delivery. We report on bright fluorescent polymersomes with aggregation-induced emission self-assembled by a series of tetraphenylethylene (TPE)-containing amphiphilic biodegradable block copolymers, where the hydrophilic block is a polyethylene glycol and hydrophobic block is a TPE-substituted trimethylenecarbonate polymer P(TPE-TMC). Their self-assemblies in water were prepared by nanoprecipitation using dioxane or tetrahydrofuran as co-solvent, and the self-assembling processes were studied in detail by cryo-electron microscopy, dynamic light scattering, and spectrofluorometer. The polymersomes are formed via the closure of bilayer lamellae self-assembled first by amphiphilic block copolymers. The polymersome membrane affords a nanosize bright fluorescent system with self-assembly induced emission in the thickness scale of 10-15 nm. The control of the whole size of polymersome is achieved by the choice of co-solvent for self-assembling and by the design of a suitable hydrophilic/hydrophobic ratio of block copolymers. These polymersomes can be potentially used as a stable fluorescent tool to monitor the transportation and distribution of drugs and bioconjugates in living cells.

Synthesis and studies of axial chiral bisbenzocoumarins: Aggregation-induced emission enhancement properties and aggregation-annihilation circular dichroism effects

Axial chiral bisbenzocoumarins were synthesized for the first time by converting naphthanol units in 1,1'-binaphthol (BINOL) molecule to the benzocoumarin rings. The substitute groups on 3,3'-positions of bisbenzocoumarins showed significant influence on their aggregation-induced emission enhancement (AEE) properties. It was also found that BBzC1 with ester groups on 3,3'-positions exhibit an abnormal aggregation-annihilation circular dichroism (AACD) phenomenon, which could be caused by the decrease of the dihedral angle between adjacent benzocoumarin rings in the aggregation state. The single crystal structure of BBzC1 showed that the large dihedral angle in molecule prohibited the strong π-π stacking interactions, which could be main factors for its AEE properties.

Multifunctional PHPMA-Derived Polymer for Ratiometric pH Sensing, Fluorescence Imaging, and Magnetic Resonance Imaging

In this paper, we report synthesis and characterization of a novel multimodality (MRI/fluorescence) probe for pH sensing and imaging. A multifunctional polymer was derived from poly(N-(2-hydroxypropyl)methacrylamide) (PHPMA) and integrated with a naphthalimide-based-ratiometric fluorescence probe and a gadolinium-1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetic acid complex (Gd-DOTA complex). The polymer was characterized using UV-vis absorption spectrophotometry, fluorescence spectrofluorophotometry, magnetic resonance imaging (MRI), and confocal microscopy for optical and MRI-based pH sensing and cellular imaging. In vitro labeling of macrophage J774 and esophageal CP-A cell lines shows the polymer's ability to be internalized in the cells. The transverse relaxation time (T₂) of the polymer was observed to be pH-dependent, whereas the spin-lattice relaxation time (T₁) was not. The pH probe in the polymer shows a strong fluorescence-based ratiometric pH response with emission window changes, exhibiting blue emission under acidic conditions and green emission under basic conditions, respectively. This study provides new materials with multimodalities for pH sensing and imaging.

Near-Infrared Emissive Discrete Platinum(II) Metallacycles: Synthesis and Application in Ammonia Detection

Two novel discrete organoplatinum(II) metallacycles are prepared by means of coordination-driven self-assembly of a 90° organoplatinum(II) acceptor, cis-(PEt3)2Pt(OTf)2, with two donors, a pyridyl donor, 9,10-di(4-pyridylvinyl)anthracene, and one of two dicarboxylate ligands. Both metallacycles display aggregation-induced emission as well as solvatochromism. More interestingly, both metallacycles exhibit near-infrared fluorescent emission in the solid state and can be used to detect ammonia gas.

Low-power white light triggered AIE polymer nanoparticles with high ROS quantum yield for mitochondria-targeted and image-guided photodynamic therapy

AIE nanoparticles show mitochondrial targeting, harvest FR/NIR emission and exert severe ROS cytotoxicity under ultralow-power-intensity (10 mW cm⁻²) light irradiation.

Synthesis of a Tetraphenylethene-Substituted Tetrapyridinium Salt with Multifunctionality: Mechanochromism, Cancer Cell Imaging, and DNA Marking

The development of functional materials is a crucial step in the development of newer and better technologies. The development of efficient luminescent materials, whose potential lie in applications in fields such as electronics, optics, data storage, and biological sciences, through simple synthetic procedures is therefore of interest. Herein, we report the synthesis of a tetrapyridinium-tetraphenylethylene (TPy-TPE) luminogen with multiple functionalities. TPy-TPE displayed characteristic features of an aggregation-induced emission material being weakly emissive in solution, but strongly emissive when aggregated and in the solid state. The solid-state emission of TPy-TPE can be reversibly switched between green and yellow by grinding–fuming/heating processes with a high contrast due to a transformation from a crystalline to an amorphous state and vice versa. TPy-TPE also works as a good fluorescent visualiser for specific staining for cellular imaging and as a DNA marker.

AIEgens-Functionalized Inorganic-Organic Hybrid Materials: Fabrications and Applications

Inorganic materials functionalized with organic fluorescent molecules combine advantages of them both, showing potential applications in biomedicine, chemosensors, light-emitting, and so on. However, when more traditional organic dyes are doped into the inorganic materials, the emission of resulting hybrid materials may be quenched, which is not conducive to the efficiency and sensitivity of detection. In contrast to the aggregation-caused quenching (ACQ) system, the aggregation-induced emission luminogens (AIEgens) with high solid quantum efficiency, offer new potential for developing highly efficient inorganic-organic hybrid luminescent materials. So far, many AIEgens have been incorporated into inorganic materials through either physical doping caused by aggregation induced emission (AIE) or chemical bonding (e.g., covalent bonding, ionic bonding, and coordination bonding) caused by bonding induced emission (BIE) strategy. The hybrid materials exhibit excellent photoactive properties due to the intramolecular motion of AIEgens is restricted by inorganic matrix. Recent advances in the fabrication of AIEgens-functionalized inorganic-organic hybrid materials and their applications in biomedicine, chemical sensing, and solid-state light emitting are presented.

Autofluorescent micelles self-assembled from an AIE-active luminogen containing an intrinsic unconventional fluorophore

Autofluorescent micelles were constructed via the self-assembly of amphiphilic molecules containing an intrinsic fluorophore. The amphiphilic molecule was an AIE-active luminogen without a conventional π-π conjugated structure. In this unconventional luminogenic system, the hydrogen-bonded amide groups were assigned as the emitting sources.

Ratiometric fluorescent pH-sensitive polymers for high-throughput monitoring of extracellular pH

Extracellular pH has a strong effect on cell metabolism and growth. Precisely detecting extracellular pH with high throughput is critical for cell metabolism research and fermentation applications. In this research, a series of ratiometric fluorescent pH sensitive polymers are developed and the ps-pH-neutral is characterized as the best one for exculsive detection of extracellular pH. Poly(N-(2-hydroxypropyl)methacrylamide) (PHPMA) is used as the host polymer to increase the water solubility of the pH sensitive polymer without introducing cell toxicity. The fluorescent emission spectra from the polymeric sensor under excitation at the isosbestic point 455 nm possess two fluorescence peaks at 475 nm and 505 nm, which have different responding trends to pH. This enables the polymer to detect pH using fluorescent maxima at 475 nm and 505 nm (I475nm /I505nm ) ratiometrically. The cell impermeability ensures the sensor can solely detect the environmental pH. The sensor is tested to detect the extracellular pH of bacteria or eukaryotic cells in high throughput assays using a microplate reader. Results showed that the pH sensor can be used for high throughput detection of extracellular pH with high repeatability and low photobleaching effect.

Fluorescent Polymer Nanoparticles Based on Dyes: Seeking Brighter Tools for Bioimaging

Speed, resolution and sensitivity of today's fluorescence bioimaging can be drastically improved by fluorescent nanoparticles (NPs) that are many-fold brighter than organic dyes and fluorescent proteins. While the field is currently dominated by inorganic NPs, notably quantum dots (QDs), fluorescent polymer NPs encapsulating large quantities of dyes (dye-loaded NPs) have emerged recently as an attractive alternative. These new nanomaterials, inspired from the fields of polymeric drug delivery vehicles and advanced fluorophores, can combine superior brightness with biodegradability and low toxicity. Here, we describe the strategies for synthesis of dye-loaded polymer NPs by emulsion polymerization and assembly of pre-formed polymers. Superior brightness requires strong dye loading without aggregation-caused quenching (ACQ). Only recently several strategies of dye design were proposed to overcome ACQ in polymer NPs: aggregation induced emission (AIE), dye modification with bulky side groups and use of bulky hydrophobic counterions. The resulting NPs now surpass the brightness of QDs by ≈10-fold for a comparable size, and have started reaching the level of the brightest conjugated polymer NPs. Other properties, notably photostability, color, blinking, as well as particle size and surface chemistry are also systematically analyzed. Finally, major and emerging applications of dye-loaded NPs for in vitro and in vivo imaging are reviewed.

Fluorescent nanoparticles based on AIE fluorogens for bioimaging

Fluorescent nanoparticles (FNPs) have recently attracted increasing attention in the biomedical field because of their unique optical properties, easy fabrication and outstanding performance in imaging. Compared with conventional molecular probes including small organic dyes and fluorescent proteins, FNPs based on aggregation-induced emission (AIE) fluorogens have shown significant advantages in tunable emission and brightness, good biocompatibility, superb photo- and physical stability, potential biodegradability and facile surface functionalization. In this review, we summarize the latest advances in the development of fluorescent nanoparticles based on AIE fluorogens including polymer nanoparticles and silica nanoparticles over the past few years, and the various biomedical applications based on these fluorescent nanoparticles are also elaborated.

Synthesis and AIE properties of PEG–PLA–PMPC based triblock amphiphilic biodegradable polymers

The synthesis of a novel AIE-active micelle based on living immortal polymerization of cyclic esters and a “click” reaction of azide functionalized TPE is described.

Polymeric AIE-based nanoprobes for biomedical applications: recent advances and perspectives

The development of polymeric luminescent nanomaterials for biomedical applications has recently attracted a large amount of attention due to the remarkable advantages of these materials compared with small organic dyes and fluorescent inorganic nanomaterials. Among these polymeric luminescent nanomaterials, polymeric luminescent nanomaterials based on dyes with aggregation-induced emission (AIE) properties should be of great research interest due to their unique AIE properties, the designability of polymers and their multifunctional potential. In this review, the recent advances in the design and biomedical applications of polymeric luminescent nanomaterials based on AIE dyes is summarized. Various design strategies for incorporation of these AIE dyes into polymeric systems are included. The potential biomedical applications such as biological imaging, and use in biological sensors and theranostic systems of these polymeric AIE-based nanomaterials have also been highlighted. We trust this review will attract significant interest from scientists from different research fields in chemistry, materials, biology and interdisciplinary areas.

Polymer-encapsulated organic nanoparticles for fluorescence and photoacoustic imaging

Polymer encapsulated organic nanoparticles have recently attracted increasing attention in the biomedical field because of their unique optical properties, easy fabrication and outstanding performance as imaging and therapeutic agents. Of particular importance is the polymer encapsulated nanoparticles containing conjugated polymers (CP) or fluorogens with aggregation induced emission (AIE) characteristics as the core, which have shown significant advantages in terms of tunable brightness, superb photo- and physical stability, good biocompatibility, potential biodegradability and facile surface functionalization. In this review, we summarize the latest advances in the development of polymer encapsulated CP and AIE fluorogen nanoparticles, including preparation methods, material design and matrix selection, nanoparticle fabrication and surface functionalization for fluorescence and photoacoustic imaging. We also discuss their specific applications in cell labeling, targeted in vitro and in vivo imaging, blood vessel imaging, cell tracing, inflammation monitoring and molecular imaging. We specially focus on strategies to fine-tune the nanoparticle property (e.g. size and fluorescence quantum yield) through precise engineering of the organic cores and careful selection of polymer matrices. The review also highlights the merits and limitations of these nanoparticles as well as strategies used to overcome the limitations. The challenges and perspectives for the future development of polymer encapsulated organic nanoparticles are also discussed.

A novel type of AIE material as a highly selective fluorescent sensor for the detection of cysteine and glutathione

Novel kind of AIE materials were easily obtained in moderate yields via tandem reactions. New highly selective cysteine detection system was also developed based on this AIE compound.

Highly efficient near-infrared organic dots based on novel AEE fluorogen for specific cancer cell imaging

Near-infrared emissive organic dots with a high fluorescence quantum efficiency (AEE dots) are prepared by using an amphiphilic polymer PSMA and a novel small molecule fluorogen (DPPBPA).

Tuning the fluorescence of aggregates for end-functionalized polymers through varying polymer chains with different polarities

Two pyrazoline initiators and their four end-functionalized polymers have been prepared and their tunable emission behaviors have been investigated.

A polymer-based ratiometric intracellular glucose sensor

The glucose metabolism level reflects cell proliferative status. A polymeric glucose ratiometric sensor comprising poly(N-(2-hydroxypropyl)methacrylamide) (PHPMA) and poly[2-(methacryloyloxy)ethyl]trimethylammonium chloride (PMAETMA) was synthesized. Cellular internalization and glucose response of the polymer within HeLa cells were investigated.

Folic acid-functionalized AIE Pdots based on amphiphilic PCL-b-PEG for targeted cell imaging

Folic acid-functionalized polymer dots with aggregation induced emission features (AIE Pdots), which show high fluorescence efficiency and little toxicity to living cells, which possess a good capability for targeted HeLa intracellular imaging.

Aggregation-induced emission block copolymers based on ring-opening metathesis polymerization

AIE amphiphilic block copolymers were developed from ROMP for the first time. By self-assembly in selective solvents, water soluble fluorescent nano-objects were prepared with varied structures including micelles and vesicles.

Colour-tunable aggregation-induced emission of trifunctional o-carborane dyes

o-Carborane compounds showed a dual-emission property (normal emission and AIE), and the emission intensities could be precisely controlled, resulting in colour-tunable emission from blue to orange via white.

Comparison of pseudo-living character of RAFT polymerizations conducted under homogeneous and heterogeneous conditions

Evidence is presented for (i) the greater pseudo-living character of RAFT dispersion polymerization compared to the equivalent solution polymerization and (ii) the presence of monomer-swollen micelles in the former formulation.

AIE macromolecules: syntheses, structures and functionalities

A comprehensive review of macromolecules with aggregation-induced emission attributes is presented, covering the frontiers of syntheses, structures, functionalities and applications.