Evaluation of Carbon Dioxide-Based Urethane Acrylate Composites for Sealers of Root Canal Obturation

A new root canal sealer was developed based on urethane acrylates using polycarbonate polyol (PCPO), a macrodiol prepared in the consumption of carbon dioxide as feedstock. The superior mechanical properties and biostability nature of PCPO-based urethane acrylates were then co-crosslinked with a difunctional monomer of tripropylene glycol diarylate (TPGDA) as sealers for resin matrix. Moreover, nanoscale silicate platelets (NSPs) immobilized with silver nanoparticles (AgNPs) and/or zinc oxide nanoparticles (ZnONPs) were introduced to enhance the antibacterial effect for the sealers. The biocompatibility and the antibacterial effect were investigated by Alamar blue assay and LDH assay. In addition, the antibacterial efficiency was performed by using Enterococcus faecalis (E. faecalis) as microbial response evaluation. These results demonstrate that the PCPO-based urethane acrylates with 50 ppm of both AgNP and ZnONP immobilized on silicate platelets, i.e., Ag/ZnO@NSP, exhibited great potential as an antibacterial composite for the sealer of root canal obturation.

A shear-thinning electrostatic hydrogel with antibacterial activity by nanoengineering of polyelectrolytes

Injectable shear-thinning hydrogels can be prepared by the non-covalent interactions between hydrophilic polymers. Although electrostatic force is a typical non-covalent interaction, direct mixing of two oppositely charged polyelectrolytes usually leads to a complex coacervate rather than an injectable hydrogel. Herein, a facile approach is proposed to prepare a shear-thinning hydrogel by nanoengineering of polyelectrolytes. Nanosized cationic micelles with electroneutral shells were prepared by mixing methoxyl poly(ethylene glycol)-block-poly(ε-caprolactone) and poly(ε-caprolactone)-block-poly(hexamethylene guanidine) hydrochloride-block-poly(ε-caprolactone) in an aqueous solution. When sodium carboxymethyl cellulose was added into the micellar solution, the outer poly(ethylene glycol) shell of mixed micelles prevented the instant electrostatic interaction between poly(hexamethylene guanidine) hydrochloride segments and sodium carboxymethyl cellulose, resulting in a homogenous shear-thinning electrostatic (STES) hydrogel. Because of the cationic poly(hexamethylene guanidine) hydrochloride segments, this hydrogel exhibits strong antibacterial activity against both Gram-positive and Gram-negative bacteria. Furthermore, the poly(ε-caprolactone) core of the mixed micelles can efficiently encapsulate a hydrophobic drug. In this work, curcumin-loaded STES hydrogel prepared by this method was used as wound dressing material that can promote wound healing even in infected wounds by further reducing bacterial infection via releasing curcumin. The present study provides a facile strategy to prepare shear-thinning antibacterial hydrogels from polyelectrolytes, which has great potential in biomedical application.

Design of zwitterionic polyester based nano-carriers for platinum(iv) prodrug delivery

Zwitterionic l-cysteine have been applied to modify polyester and load a platinum(iv) drug to prolong the circulation time of the drugs in blood and improve the stability of drug loading.

Preparation of cationic polyelectrolyte grafted polyvinyl alcohol-formaldehyde macroporous hydrogels and their antibacterial properties

A series of novel antibacterial porous cationic PVF-g-PDMC hydrogels, synthesized by radical polymerization using ceric ammonium nitrate as an initiator, show excellent antibacterial properties, and can be used as biomedical materials.

Facile and Versatile Modification of Cotton Fibers for Persistent Antibacterial Activity and Enhanced Hygroscopicity

Natural fibers with functionalities have attracted considerable attention. However, developing facile and versatile strategies to modify natural fibers is still a challenge. In this study, cotton fibers, the most widely used natural fibers, were partially oxidized by sodium periodate in aqueous solution, to give oxidized cotton fibers containing multiple aldehyde groups on their surface. Then poly(hexamethylene guanidine) was chemically grafted onto the oxidized cotton fibers forming Schiff bases between the terminal amines of poly(hexamethylene guanidine) and the aldehyde groups of oxidized cotton fibers. Finally, carbon-nitrogen double bonds were reduced by sodium cyanoborohydride, to bound poly(hexamethylene guanidine) covalently to the surface of cotton fibers. These functionalized fibers show strong and persistent antibacterial activity: complete inhibition against Escherichia coli and Staphylococcus aureus was maintained even after 1000 consecutive washing in distilled water. On the other hand, cotton fibers with only physically adsorbed poly(hexamethylene guanidine) lost their antibacterial activity entirely after a few washes. According to Cell Counting Kit-8 assay and hemolytic analysis, toxicity did not significantly increase after chemical modification. Attributing to the hydrophilicity of poly(hexamethylene guanidine) coatings, the modified cotton fibers were also more hygroscopic compared to untreated cotton fibers, which can improve the comfort of the fabrics made of modified cotton fibers. This study provides a facile and versatile strategy to prepare modified polysaccharide natural fibers with durable antibacterial activity, biosecurity, and comfortable touch.

Functional biodegradable polymers via ring-opening polymerization of monomers without protective groups

Biodegradable polymers are of current interest and chemical functionality in such materials is often demanded in advanced biomedical applications. Functional groups often are not tolerated in the polymerization process of ring-opening polymerization (ROP) and therefore protective groups need to be applied. Advantageously, several orthogonally reactive functions are available, which do not demand protection during ROP. We give an insight into available, orthogonally reactive cyclic monomers and the corresponding functional synthetic and biodegradable polymers, obtained from ROP. Functionalities in the monomer are reviewed, which are tolerated by ROP without further protection and allow further post-modification of the corresponding chemically functional polymers after polymerization. Synthetic concepts to these monomers are summarized in detail, preferably using precursor molecules. Post-modification strategies for the reported functionalities are presented and selected applications highlighted.

Synthesis of Amphiphilic Copolymers Containing Ciprofloxacin and Amine Groups and Their Antimicrobial Performances As Revealed by Confocal Laser-Scanning Microscopy and Atomic-Force Microscopy

Two series of amphiphilic antimicrobial copolymers containing ciprofloxacin (CPF) and amine functional groups have been synthesized via free-radical copolymerization. The chemical structures of the different amine groups and the copolymer compositions have been systematically varied to study how the structure of the copolymer exerts an influence on the antibacterial activity. The viability of Escherichia coli in the presence of antimicrobial copolymers was observed by confocal laser-scanning microscopy (CLSM). CLSM as well as atomic-force microscopy (AFM) were applied to visualize changes in morphology of bacteria treated with antimicrobial copolymers and elucidate the antimicrobial mechanism of the antimicrobial copolymers. Morphological changes of bacteria observed via AFM and CLSM demonstrated that the antibacterial mechanism was due to the disruption of the bacterial membrane. The destruction of the cell membrane was also confirmed by the leakage of intracellular components, which had a strong absorbance at 260 nm. The inhibitory process was monitored by UV absorption dynamically.

Critical review of fouling mitigation strategies in membrane bioreactors treating water and wastewater

The current research was an effort to critically review all approaches used for membrane fouling control in the membrane bioreactors treating water and wastewater. The first generation of antifouling methods tried to optimize operational conditions, or used chemical agents to control membrane fouling. Despite their positive impacts on the fouling mitigation, these methods did not provide a sustainable solution for the problem. Moreover, chemical agents may affect microorganisms in bioreactors and has some environmental drawbacks. The improved knowledge of membrane fouling mechanism and effective factors has directed the attention of researchers to novel methods that focus on disrupting fouling mechanism through affecting fouling causing bacteria. Employing nanomaterials, cell entrapment, biologically- and electrically-based methods are the latest efforts. The results of this review indicate that sustainable control of membrane fouling requires employing more than one single approach. Large scale application of fouling mitigation strategies should be the focus of future studies.

Antifouling membranes for sustainable water purification: strategies and mechanisms

One of the greatest challenges to the sustainability of modern society is an inadequate supply of clean water. Due to its energy-saving and cost-effective features, membrane technology has become an indispensable platform technology for water purification, including seawater and brackish water desalination as well as municipal or industrial wastewater treatment. However, membrane fouling, which arises from the nonspecific interaction between membrane surface and foulants, significantly impedes the efficient application of membrane technology. Preparing antifouling membranes is a fundamental strategy to deal with pervasive fouling problems from a variety of foulants. In recent years, major advancements have been made in membrane preparation techniques and in elucidating the antifouling mechanisms of membrane processes, including ultrafiltration, nanofiltration, reverse osmosis and forward osmosis. This review will first introduce the major foulants and the principal mechanisms of membrane fouling, and then highlight the development, current status and future prospects of antifouling membranes, including antifouling strategies, preparation techniques and practical applications. In particular, the strategies and mechanisms for antifouling membranes, including passive fouling resistance and fouling release, active off-surface and on-surface strategies, will be proposed and discussed extensively.

Synthesis of Pyrrolidinium-Type Poly(ionic liquid) Membranes for Antibacterial Applications

Pyrrolidinium-type small molecule ionic liquids (ILs), poly(ionic liquid) (PIL) homopolymers, and their corresponding PIL membranes were synthesized and used for antibacterial applications. The influences of substitutions at the N position of pyrrolidinium cation on the antimicrobial activities against both Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) were studied by minimum inhibitory concentration (MIC). The antibacterial efficiency of both the small molecule ILs and PIL homopolymers increased with the increase of the alkyl chain length of substitutions. Furthermore, PIL homopolymers show relatively lower MIC values, indicating better antimicrobial activities than those of the corresponding small molecule ILs. However, the antibacterial properties of the PIL membranes are contrary to corresponding ILs and PIL homopolymers, which reduce with the increase of alkyl chain length. Furthermore, the resultant PIL membranes show excellent hemocompatibility and low cytotoxicity toward human cells, demonstrating clinical feasibility in topical applications.

Injectable cationic hydrogels with high antibacterial activity and low toxicity

We prepared injectable cationic hydrogels with strong antibacterial activity and remarkably low toxicity by in situ thiol–ene “click” reaction between dimethacrylate terminated poly(hexamethylene guanidine) (PHMGDMA) and poly[oligo(ethylene) glycol mercaptosuccinate] (POEGMS) under physiological conditions.

Broad spectrum antibacterial and antifungal polymeric paint materials: synthesis, structure-activity relationship, and membrane-active mode of action

Microbial attachment and subsequent colonization onto surfaces lead to the spread of deadly community-acquired and hospital-acquired (nosocomial) infections. Noncovalent immobilization of water insoluble and organo-soluble cationic polymers onto a surface is a facile approach to prevent microbial contamination. In the present study, we described the synthesis of water insoluble and organo-soluble polymeric materials and demonstrated their structure-activity relationship against various human pathogenic bacteria including drug-resistant strains such as methicillin-resistant Staphylococcus aureus (MRSA), vancomycin-resistant enterococci (VRE), and beta lactam-resistant Klebsiella pneumoniae as well as pathogenic fungi such as Candida spp. and Cryptococcus spp. The polymer coated surfaces completely inactivated both bacteria and fungi upon contact (5 log reduction with respect to control). Linear polymers were more active and found to have a higher killing rate than the branched polymers. The polymer coated surfaces also exhibited significant activity in various complex mammalian fluids such as serum, plasma, and blood and showed negligible hemolysis at an amount much higher than minimum inhibitory amounts (MIAs). These polymers were found to have excellent compatibility with other medically relevant polymers (polylactic acid, PLA) and commercial paint. The cationic hydrophobic polymer coatings disrupted the lipid membrane of both bacteria and fungi and thus showed a membrane-active mode of action. Further, bacteria did not develop resistance against these membrane-active polymers in sharp contrast to conventional antibiotics and lipopeptides, thus the polymers hold great promise to be used as coating materials for developing permanent antimicrobial paint.

Reduction-triggered release of paclitaxel from in situ formed biodegradable core-cross-linked micelles

We provide a facile strategy to prepare redox-responsive core-crosslinked micelles for the controlled release of paclitaxel.

Synthesis of poly(ester-carbonate) with a pendant acetylcholine analog for promoting neurite growth

The modification of biodegradable polyesters with bioactive molecules has become an important strategy for controlling neuron adhesion and neurite outgrowth in nerve regeneration. In this study we report a biodegradable poly(ester-carbonate) with a pendant acetylcholine analog, which a neurotransmitter for the enhancement of neuron adhesion and outgrowth. The acetylcholine-functionalized poly(ester-carbonate) (Ach-P(LA-ClTMC)) was prepared by copolymerizing l-lactide (LA) and 5-methyl-5-chloroethoxycarbonyl trimethylene carbonate (ClTMC), followed by quaternization with trimethylamine. The acetylcholine analog content could be modulated by changing the molar feeding fraction of ClTMC. The incorporation of the acetylcholine analog improved the hydrophilicity of the films, but the acetylcholine analog content did not significantly influence the surface morphology of the acetylcholine-functionalized films. The results of PC12 cell culture showed that the acetylcholine analog promoted cell viability and neurite outgrowth in a concentration-dependent manner. The longest length of neurite and the percentage of cells bearing neurites were obtained on the Ach-P(LA-ClTMC)-10 film. All the results indicate that the integration of the acetylcholine analog at an appropriate fraction could be an effective strategy for optimizing the existing biodegradable polyesters for nerve regeneration applications.

Facile fabrication of ultrathin antibacterial hydrogel films via layer-by-layer “click” chemistry

Ultrathin antibacterial hydrogel films were prepared via layer-by-layer “click” chemistry.

Fully biodegradable antibacterial hydrogels via thiol–ene “click” chemistry

Novel biodegradable antimicrobial hydrogels, which are promising for use as biomaterials, were prepared facilely via a thiol–ene “click” reaction under human physiological conditions using multifunctional poly(ethylene glycol) (PEG) derivatives as precursors.