The Emerging Star of Carbon Luminescent Materials: Exploring the Mysteries of the Nanolight of Carbon Dots for Optoelectronic Applications

Carbon dots (CDs), a class of carbon-based nanomaterials with dimensions less than 10 nm, have attracted significant interest since their discovery. They possess numerous excellent properties, such as tunability of photoluminescence, environmental friendliness, low cost, and multifunctional applications. Recently, a large number of reviews have emerged that provide overviews of their synthesis, properties, applications, and their composite functionalization. The application of CDs in the field of optoelectronics has also seen unprecedented development due to their excellent optical properties, but reviews of them in this field are relatively rare. With the idea of deepening and broadening the understanding of the applications of CDs in the field of optoelectronics, this review for the first time provides a detailed summary of their applications in the field of luminescent solar concentrators (LSCs), light-emitting diodes (LEDs), solar cells, and photodetectors. In addition, the definition, categories, and synthesis methods of CDs are briefly introduced. It is hoped that this review can bring scholars more and deeper understanding in the field of optoelectronic applications of CDs to further promote the practical applications of CDs.

Mango Leaves (Mangifera indica)-Derived Highly Florescent Green Graphene Quantum Dot Nanoprobes for Enhanced On-Off Dual Detection of Cholesterol and Fe2+ Ions Based on Molecular Logic Operation

In the present study, we have engineered a molecular logic gate system employing both Fe2+ ions and cholesterol as bioanalytes for innovative detection strategies. We utilized a green-synthesis method employing the mango leaves extract to create fluorescent graphene quantum dots termed "mGQDs". Through techniques like HR-TEM, i.e., high-resolution transmission electron microscopy, Raman spectroscopy, and XPS, i.e., X-ray photoelectron spectroscopy, the successful formation of mGQDs was confirmed. The photoluminescence (PL) characteristics of mGQDs were investigated for potential applications in metal ion detection, specifically Fe2+ traces in water, by using fluorescence techniques. Under 425 nm excitation, mGQDs exhibited emission bands at 495 and 677 nm in their PL spectrum. Fe2+-induced notable quenching of mGQDs' PL intensity decreased by 97% with 2.5 μM Fe2+ ions; however, adding 20 mM cholesterol resulted in a 92% recovery. Detection limits were established through a linear Stern-Volmer (S-V) plot at room temperature, yielding values of 4.07 μM for Fe2+ ions and 1.8 mM for cholesterol. Moreover, mGQDs demonstrated biocompatibility, aqueous solubility, and nontoxicity, facilitating the creation of a rapid nonenzymatic cholesterol detection method. Selectivity and detection studies underscored mGQDs' reliability in cholesterol level monitoring. Additionally, a molecular logic gate system employing Fe2+ metal ions and cholesterol as a bioanalyte was established for detection purposes. Overall, this research introduces an ecofriendly approach to craft mGQDs and highlights their effectiveness in detecting metal ions and cholesterol, suggesting their potential as versatile nanomaterials for diverse analytical and biomedical applications.

A review on synthesis, properties, and biomedical applications of graphene quantum dots (GQDs)

A new type of 0-dimensional carbon-based materials called graphene quantum dots (GQDs) is gaining significant attention as a non-toxic and eco-friendly nanomaterial. GQDs are nanomaterials composed of sp2hybridized carbon domains and functional groups, with their lateral size less than 10 nm. The unique and exceptional physical, chemical, and optical properties arising from the combination of graphene structure and quantum confinement effect due to their nano-size make GQDs more intriguing than other nanomaterials. Particularly, the low toxicity and high solubility derived from the carbon core and abundant edge functional groups offer significant advantages for the application of GQDs in the biomedical field. In this review, we summarize various synthetic methods for preparing GQDs and important factors influencing the physical, chemical, optical, and biological properties of GQDs. Furthermore, the recent application of GQDs in the biomedical field, including biosensor, bioimaging, drug delivery, and therapeutics are discussed. Through this, we provide a brief insight on the tremendous potential of GQDs in biomedical applications and the challenges that need to be overcome in the future.

Quantum Dots as a Potential Multifunctional Material for the Enhancement of Clinical Diagnosis Strategies and Cancer Treatments

Quantum dots (QDs) represent a class of nanoscale wide bandgap semiconductors, and are primarily composed of metals, lipids, or polymers. Their unique electronic and optical properties, which stem from their wide bandgap characteristics, offer significant advantages for early cancer detection and treatment. Metal QDs have already demonstrated therapeutic potential in early tumor imaging and therapy. However, biological toxicity has led to the development of various non-functionalized QDs, such as carbon QDs (CQDs), graphene QDs (GQDs), black phosphorus QDs (BPQDs) and perovskite quantum dots (PQDs). To meet the diverse needs of clinical cancer treatment, functionalized QDs with an array of modifications (lipid, protein, organic, and inorganic) have been further developed. These advancements combine the unique material properties of QDs with the targeted capabilities of biological therapy to effectively kill tumors through photodynamic therapy, chemotherapy, immunotherapy, and other means. In addition to tumor-specific therapy, the fluorescence quantum yield of QDs has gradually increased with technological progress, enabling their significant application in both in vivo and in vitro imaging. This review delves into the role of QDs in the development and improvement of clinical cancer treatments, emphasizing their wide bandgap semiconductor properties.

Carbon dots as versatile nanomaterials in sensing and imaging: Efficiency and beyond

Carbon dots (CDs) have emerged as a versatile and promising carbon-based nanomaterial with exceptional optical properties, including tunable emission wavelengths, high quantum yield, and photostability. CDs are appropriate for various applications with many benefits, such as biocompatibility, low toxicity, and simplicity of surface modification. Thanks to their tunable optical properties and great sensitivity, CDs have been used in sensing as fluorescent probes for detecting pH, heavy metal ions, and other analytes. In addition, CDs have demonstrated potential as luminescence converters for white organic light-emitting diodes and light emitters in optoelectronic devices due to their superior optical qualities and exciton-independent emission. CDs have been used for drug administration and bioimaging in the biomedical field due to their biocompatibility, low cytotoxicity, and ease of functionalization. Additionally, due to their stability, efficient charge separation, and low recombination rate, CDs have shown interesting uses in energy systems, such as photocatalysis and energy conversion. This article highlights the growing possibilities and potential of CDs as adaptable nanomaterials in a variety of interdisciplinary areas related to sensing and imaging, at the same time addressing the major challenges involved in the current research and proposing scientific solutions to apply CDs in the development of a super smart society.

Graphene quantum dots for biosensing and bioimaging

Graphene Quantum Dots (GQDs) are low dimensional carbon based materials with interesting physical, chemical and biological properties that enable their applications in numerous fields. GQDs possess unique electronic structures that impart special functional attributes such as tunable optical/electrical properties in addition to heteroatom-doping and more importantly a propensity for surface functionalization for applications in biosensing and bioimaging. Herein, we review the recent advancements in the top-down and bottom-up approaches for the synthesis of GQDs. Following this, we present a detailed review of the various surface properties of GQDs and their applications in bioimaging and biosensing. GQDs have been used for fluorescence imaging for visualizing tumours and monitoring the therapeutic responses in addition to magnetic resonance imaging applications. Similarly, the photoluminescence based biosensing applications of GQDs for the detection of hydrogen peroxide, micro RNA, DNA, horse radish peroxidase, heavy metal ions, negatively charged ions, cardiac troponin, etc. are discussed in this review. Finally, we conclude the review with a discussion on future prospects.

Fluorescent Nanocarbons: From Synthesis and Structure to Cancer Imaging and Therapy

Nanocarbons are emerging at the forefront of nanoscience, with diverse carbon nanoforms emerging over the past two decades. Early cancer diagnosis and therapy, driven by advanced chemistry techniques, play a pivotal role in mitigating mortality rates associated with cancer. Nanocarbons, with an attractive combination of well-defined architectures, biocompatibility, and nanoscale dimension, offer an incredibly versatile platform for cancer imaging and therapy. This paper aims to review the underlying principles regarding the controllable synthesis, fluorescence origins, cellular toxicity, and surface functionalization routes of several classes of nanocarbons: carbon nanodots, nanodiamonds, carbon nanoonions, and carbon nanohorns. This review also highlights recent breakthroughs regarding the green synthesis of different nanocarbons from renewable sources. It also presents a comprehensive and unified overview of the latest cancer-related applications of nanocarbons and how they can be designed to interface with biological systems and work as cancer diagnostics and therapeutic tools. The commercial status for large-scale manufacturing of nanocarbons is also presented. Finally, it proposes future research opportunities aimed at engendering modifiable and high-performance nanocarbons for emerging applications across medical industries. This work is envisioned as a cornerstone to guide interdisciplinary teams in crafting fluorescent nanocarbons with tailored attributes that can revolutionize cancer diagnostics and therapy.

Engineering functionalization and properties of graphene quantum dots (GQDs) with controllable synthesis for energy and display applications

Graphene quantum dots (GQDs), a new type of 0D nanomaterial, are composed of a graphene lattice with sp2 bonding carbon core and characterized by their abundant edges and wide surface area. This unique structure imparts excellent electrical properties and exceptional physicochemical adsorption capabilities to GQDs. Additionally, the reduction in dimensionality of graphene leads to an open band gap in GQDs, resulting in their unique optical properties. The functional groups and dopants in GQDs are key factors that allow the modulation of these characteristics. So, controlling the functionalization level of GQDs is crucial for understanding their characteristics and further application. This review provides an overview of the properties and structure of GQDs and summarizes recent developments in research that focus on their controllable synthesis, involving functional groups and doping. Additionally, we provide a comprehensive and focused explanation of how GQDs have been advantageously applied in recent years, particularly in the fields of energy storage devices and displays.

Revolutionizing Cancer Care: Advances in Carbon-Based Materials for Diagnosis and Treatment

Cancer involves intricate pathological mechanisms marked by complexities such as cytotoxicity, drug resistance, stem cell proliferation, and inadequate specificity in current chemotherapy approaches. Cancer therapy has embraced diverse nanomaterials renowned for their unique magnetic, electrical, and optical properties to address these challenges. Despite the expanding corpus of knowledge in this area, there has been less advancement in approving nano drugs for use in clinical settings. Nanotechnology, and more especially the development of intelligent nanomaterials, has had a profound impact on cancer research and treatment in recent years. Due to their large surface area, nanoparticles can adeptly encapsulate diverse compounds. Furthermore, the modification of nanoparticles is achievable through a broad spectrum of bio-based substrates, including DNA, aptamers, RNA, and antibodies. This functionalization substantially enhances their theranostic capabilities. Nanomaterials originating from biological sources outperform their conventionally created counterparts, offering advantages such as reduced toxicity, lower manufacturing costs, and enhanced efficiency. This review uses carbon nanomaterials, including graphene-based materials, carbon nanotubes (CNTs) based nanomaterials, and carbon quantum dots (CQDs), to give a complete overview of various methods used in cancer theranostics. We also discussed their advantages and limitations in cancer diagnosis and treatment settings. Carbon nanomaterials might significantly improve cancer theranostics and pave the way for fresh tumor diagnosis and treatment approaches. More study is needed to determine whether using nano-carriers for targeted medicine delivery may increase material utilization. More insight is required to explore the correlation between heightened cytotoxicity and retention resulting from increased permeability.

From Pristine to Heteroatom-Doped Graphene Quantum Dots: An Essential Review and Prospects for Future Research

Graphene quantum dots (GQDs) are carbon-based zero-dimensional materials that have received considerable scientific interest due to their exceptional optical, electrical, and optoelectrical properties. Their unique electronic band structures, influenced by quantum confinement and edge effects, differentiate the physical and optical characteristics of GQDs from other carbon nanostructures. Additionally, GQDs can be synthesized using various top-down and bottom-up approaches, distinguishing them from other carbon nanomaterials. This review discusses recent advancements in GQD research, focusing on their synthesis and functionalization for potential applications. Particularly, various methods for synthesizing functionalized GQDs using different doping routes are comprehensively reviewed. Based on previous reports, current challenges and future directions for GQDs research are discussed in detail herein.

White sustainable luminescent determination of nifuroxazide using nitrogen-sulphur co-doped carbon quantum dots nanosensor in bulk and various pharmaceutical matrices

Nifuroxazide (NFX) is an antimicrobial agent that is frequently used as an intestinal antiseptic and recently was proven to have anticancer properties. This work employs the use of nitrogen and sulphur co-doped carbon quantum dots (NSC-dots) luminescent nanoparticles to propose a highly sensitive, sustainable, white and green spectrofluorometric method for NFX detection in bulk and pharmaceutical dosage forms. l-Cysteine and citric acid were the precursors to synthesize water soluble NSC-dots by a quick and environmentally-friendly hydrothermal process. NSC-dots' native fluorescence was measured at λem = 416 nm following excitation at 345 nm. Addition of NFX resulted in quantitative quenching of NSC-dots' luminescence, which represents the principle over which this luminescent method was based. Additionally, the mechanism of fluorescence quenching was studied and discussed. The analytical procedure was validated according to the ICH-guidelines. Linear response for NFX was obtained in the dynamic range 0.04-15 μg mL-1. The estimated NFX detection and quantification limits were 0.005 and 0.015 μg mL-1, respectively. The proposed method was employed for NFX quantification into two commercial pharmaceutical dosage forms. The calculated percentage recoveries (R%), percentage relative standard deviations (RSD%), and percentage error (Er%) were satisfactory. Comparison with other reported methods showed that the proposed method is superior in several aspects. Evaluation of the whiteness of the proposed method using the RGB 12 algorithm combined with the most widely used greenness evaluation tools, the Analytical Eco-Scale and AGREE, demonstrated its superiority and sustainability over other previously published spectrofluorimetric methods for the assay of NFX in various dosage forms.

A Fluorescent Vector of Carbon Dot to Deliver Rab13 and Rab14 Plasmids for Promoting Neurite Outgrowth

The complex processes of neuron differentiation and neuron repair are critical for treating nervous system injuries and neurodegenerative diseases. Neurite outgrowth plays a crucial role in these processes by enabling the formation of connections between neurons and the generation of neuroplasticity to restore the function of the nervous system. In this study, we fabricated functionalized carbon dots (CDs) with distinctive photoluminescence and low cytotoxicity for use as fluorescence imaging probes and nanocarriers to deliver plasmid DNAs to neurons effectively for inducing neurite outgrowth. CDs were prepared through a reflux process in nitric acid solution, and their surface was then modified using polyethylenimine (PEI) to obtain positively charged CDs for increasing the absorption of plasmid DNAs and the efficiency of cell uptake. Experimental results indicated that the fabricated CDs maintained a low cytotoxicity and exhibited a high neuron uptake of up to 97%. An improvement in the plasmid DNA ingestion of neurons resulted in enhanced expression of Rab13-Q67L and Rab14 proteins, which considerably promoted neurite sprouting and elongation. After the fabricated PEI-modified CDs were used to deliver the Rab13-Q67L and Rab14 plasmids, more than 56% of the neurons had a neurite length that was greater than twice the size of their soma. Thus, DNA delivery through functionalized CDs has a high potential for use in gene therapy for neuronal injuries and diseases.

Green "turn-off" luminescent nanosensors for the sensitive determination of desperately fluorescent antibacterial antiviral agent and its metabolite in various matrices

Nitazoxanide (NTX) is an antimicrobial drug that was used for the treatment of various protozoa. However, during the coronavirus pandemic, NTX has been redirected for the treatment of such virus that primarily infect the respiratory tract system. NTX is now used as a broad-spectrum antiviral agent. In this study, a highly sensitive and green spectrofluorometric method was developed to detect NTX in various dosage forms and its metabolite, tizoxanide (TX), in human plasma samples using nitrogen and sulfur co-doped carbon quantum dots nanosensors (C-dots). A simple and eco-friendly hydrothermal method was used to synthetize water soluble C-dots from citric acid and l-cysteine. After excitation at 345 nm, the luminescence intensity was measured at 416 nm. Quenching of C-dots luminescence occurred upon the addition of NTX and was proportional to NTX concentration. Assessment of the quenching mechanism was performed to prove that inner filter effect is the underlying molecular mechanism of NTX quenching accomplished. After optimizing all experimental parameters, the analytical procedure was evaluated and validated using the ICH guidelines. The method linearity, detection and quantification limits of NTX were 15 × 10-3-15.00 µg/mL, 56.00 × 10-4 and 15 × 10-3 µg/mL, respectively. The proposed method was applied for the determination of NTX in its commercial pharmaceutical products; Nanazoxid® oral suspension and tablets. The obtained % recovery, relative standard deviation and % relative error were satisfactory. Comparison with other reported spectrofluorimetric methods revealed the superior sensitivity of the proposed method. Such high sensitivity permitted the selective determination of TX, the main metabolite of NTX, in human plasma samples making this study the first spectrofluorimetric method in literature that determine TX in human plasma samples. Moreover, the method greenness was assessed using both Eco-Scale and AGREE approaches to prove the superiority of the proposed method greenness over other previously published spectrofluorimetric methods for the analysis of NTX and its metabolite, TX, in various dosage forms and in human plasma samples.

Sustainable Preparation of Graphene Quantum Dots from Leaves of Date Palm Tree

The date palm (Phoenix dactylifera), a subtropical and tropical tree, included in the family Palmae (Arecaceae) is one of the oldest cultivated plants of mankind. Date palm is a major agricultural product in the semi-arid and arid areas of the world, particularly in Arab countries. These trees generate high quantities of agricultural waste in the form of dry leaves, seeds, etc. In this study, dried date palm leaves were used as green precursors for synthesizing graphene quantum dots (GQDs). This work reported the preparation of GQDs using two different sustainable methods. GQD-1 was developed using a simple, hydrothermal technique at 200 °C for 12 h in water, with no requirement of reducing or passivizing agents or organic solvents. GQD-2 was prepared using a hydrothermal technique at 200 °C for 12 h in water, with the usage of just distilled water and absolute ethanol. The compositional analysis of the leaf extract was performed, along with the morphological, compositional, and optical examination of the sustainably developed GQDs. The characterization results confirmed the successful formation of GQDs, with average sizes ranging from 3.5 to 8 nm. This study helps to obtain GQDs in an economical, eco-friendly, and biocompatible manner and can assist in large-scale production and in recycling date palm tree waste products from Middle East countries into value-added products.

Investigating of the anticancer activity of salen/salophen metal complexes based on graphene quantum dots: Induction of apoptosis as part of biological activity

This research work is the first report on the synthesis and stabilization of [Fe-Salophen] and [Fe-Salen] complexes by two methods of surface modification and anchoring of synthesized Schiff base ligand on the surface of graphene quantum dots (GQDs). The GQDs contain oxygenated functional groups that can act as non-radiative electron-hole recombination centers. Therefore removing these oxygen functional groups may improve quantum yield by reducing or deactivating the surface. In this work, GQDs with the amine functional group were synthesized with a quantum yield of 37.48%. The physicochemical properties of GQDs were investigated by Ultraviolet-visible (UV-Vis) and fluorescence spectroscopies, Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (FESEM), X-ray photoelectron spectroscopy (XPS), Powder X-ray diffraction (PXRD), Transmission electron microscope (TEM). The synthesis of GQDs-[Fe-Salen] and GQDs-[Fe-Salophen] was evaluated by FT-IR, Inductively coupled plasma atomic emission spectroscopy (ICP-AES) and Energy dispersive X-Ray analysis (EDX) analyses. Then, using MTT- assay, annexin V-FITC/PI, DAPI staining and cellular uptake assays, the biochemical activity of these complexes on the MCF7 cell line was investigated. The results shows that GQDs-[Fe-Salen] and GQDs-[Fe-Salophen] affect the survival of MCF7 cancer cells and, by nuclear fragmentation cause 35.77% and 19.41% of early apoptosis in cells, respectively. Also was found cellular uptake of GQDs-[Fe-Salen] is higher than that of GQDs-[Fe-Salophen].

Laser-induced graphene electrodes on polyimide membranes modified with gold nanoparticles for the simultaneous detection of dopamine and uric acid in human serum

The level control of biological active molecules in human body fluids is important for the surveillance of several human diseases. Dopamine (DA) and uric acid (UA) are two important biomarkers of neurological and bone diseases, respectively. Design of sensitive and cost-effective sensors for their detection is an effervescent research field. We report on the straightforward design of laser-induced graphene electrodes (LIGEs) from the laser ablation of a polyimide substrate and their modification by electrochemical deposition of gold nanoparticles (AuNPs/LIGE) and their uses as chemosensors. Electrochemical investigations showed that the presence of gold nanoclusters onto the electrode surface improved the electrochemical surface area (ECSA) and the heterogenous electron transfer (HET) rate. Furthermore, the AuNPs/LIGEs can be used to detect simultaneously low concentrations of DA and UA in presence of ascorbic acid (AA) as an potentially interfering substance at redox potentials of 300 mV, 230 mV and 450 mV and 91 mV, respectively, compared with the Ag/AgCl (3 M KCl) reference electrode in cyclic voltametric. The method displayed linear ranges varying from 2 to 20 μM and 5 to 50 μM, led to limits of detection of 0.37 μM and 0.71 μM for DA and UA, respectively. The AuNPs/LIGE was applied to simultaneously detect both analytes in scarcely diluted human serum with good recoveries. The data show that the recovery percentages ranged from 94% ± 2.1 to 102 % ± 0.5 and from 94% ±0.3 to 112% ± 1.4 for dopamine and uric acid, respectively. Thus, the AuNPs/LIGEs are promising candidates for the detection of other biologically active molecules such as drugs, pesticides, and metabolites.

Facile Synthesis of Oxidized Boron Nanosheets for Chemo- and Biosensing

As recently emerging nanomaterials, boron nanosheets (BNSs) have attracted more and more attention in various fields such as supercapacitors, photodetectors, bioimaging, and electrocatalysis due to their advantages of good biological compatibility, environmental friendliness, and good electro-optical properties. However, the study and application of BNSs in chemical and biological sensing are still in the infant stage, mainly due to the requirement of complicated, high-cost, and time-consuming preparation strategies. In this work, a new class of BNSs, namely oxidized-BNSs (i.e., ox-BNSs), were easily and rapidly synthesized by chemically treating boron powder with diluted HNO₃ in a very short time (less than 15 min). The composition, morphology, optical property, and peroxidase mimetic activity of obtained ox-BNSs were investigated in detail. The prepared ox-BNSs were several-layered nanosheets with abundant oxygen-containing groups, emitted blue fluorescence, and possessed good intrinsic peroxidase mimetic activity, based on which a sensitive and selective colorimetric sensor was developed for detection of H₂O₂ and glucose. The new easy preparation strategy and good sensing performances of the prepared ox-BNSs would greatly stimulate the study and application of BNSs in chemo- and biosensing.

Advances in Structural Modifications and Properties of Graphene Quantum Dots for Biomedical Applications

Graphene quantum dots (GQDs) are carbon-based, zero-dimensional nanomaterials and unique due to their astonishing optical, electronic, chemical, and biological properties. Chemical, photochemical, and biochemical properties of GQDs are intensely being explored for bioimaging, biosensing, and drug delivery. The synthesis of GQDs by top-down and bottom-up approaches, their chemical functionalization, bandgap engineering, and biomedical applications are reviewed here. Current challenges and future perspectives of GQDs are also presented.

Synthesis and application of quantum dots in detection of environmental contaminants in food: A comprehensive review

Environmental pollutants can accumulate in the human body through the food chain, which may seriously impact human health. Therefore, it is of vital importance to develop quick, simple, accurate and sensitive (respond quickly) technologies to evaluate the concentration of environmental pollutants in food. Quantum dots (QDs)-based fluorescence detection methods have great potential to overcome the shortcomings of traditional detection methods, such as long detection time, cumbersome detection procedures, and low sensitivity. This paper reviews the types and synthesis methods of QDs with a focus on green synthesis and the research progress on rapid detection of environmental pollutants (e.g., heavy metals, pesticides, and antibiotics) in food. Metal-based QDs, carbon-based QDs, and "top-down" and "bottom-up" synthesis methods are discussed in detail. In addition, research progress of QDs in detecting different environmental pollutants in food is discussed, especially, the practical application of these methods is analyzed. Finally, current challenges and future research directions of QDs-based detection technologies are critically discussed. Hydrothermal synthesis of carbon-based QDs with low toxicity from natural materials has a promising future. Research is needed on green synthesis of QDs, direct detection without pre-processing, and simultaneous detection of multiple contaminants. Finally, how to keep the mobile sensor stable, sensitive and easy to store is a hot topic in the future.

Emerging Trends of Carbon-Based Quantum Dots: Nanoarchitectonics and Applications

Carbon-based quantum dots (QDs) have emerged as a fascinating class of advanced materials with a unique combination of optoelectronic, biocompatible, and catalytic characteristics, apt for a plethora of applications ranging from electronic to photoelectrochemical devices. Recent research works have established carbon-based QDs for those frontline applications through improvements in materials design, processing, and device stability. This review broadly presents the recent progress in the synthesis of carbon-based QDs, including carbon QDs, graphene QDs, graphitic carbon nitride QDs and their heterostructures, as well as their salient applications. The synthesis methods of carbon-based QDs are first introduced, followed by an extensive discussion of the dependence of the device performance on the intrinsic properties and nanostructures of carbon-based QDs, aiming to present the general strategies for device designing with optimal performance. Furthermore, diverse applications of carbon-based QDs are presented, with an emphasis on the relationship between band alignment, charge transfer, and performance improvement. Among the applications discussed in this review, much focus is given to photo and electrocatalytic, energy storage and conversion, and bioapplications, which pose a grand challenge for rational materials and device designs. Finally, a summary is presented, and existing challenges and future directions are elaborated.

A review of graphene quantum dots and their potential biomedical applications

Today, nanobiotechnology is a pioneering technology in biomedicine. Every day, new nanomaterials are synthesized with elevated physiochemical properties for better diagnosis and treatment of diseases. One advancing class of materials is the Graphene family. Among different kinds of graphene derivatives, graphene quantum dots (GQDs) show fantastic optical, electrical, and electrochemical features originating from their unique quantum confinement effect. Due to the distinct properties of GQD, including large surface-to-volume ratio, low cytotoxicity, and easy functionalization, this nanomaterial has gone popular in biomedical field. Herein, a short overview of different strategies developed for GQD synthesis and functionalization is discussed. In the following, the most recent progress of GQD based nanomaterials in different biomedical fields, including bio-imaging, drug/gene delivery, antimicrobial, tissue engineering, and biosensors, are reviewed.

Solid-Phase Pyrolysis Synthesis of Highly Fluorescent Nitrogen/Sulfur Codoped Graphene Quantum Dots for Selective and Sensitive Diversity Detection of Cr(VI)

In this study, a simple one-step solid-phase pyrolysis synthesis procedure was employed to prepare N and S codoped highly fluorescent graphene quantum dots (N/S-GQDs). The as-synthesized quantum dot showed λ_excitation-dependent blue fluorescence (FL) emission with a relative quantum yield of about 22% and displayed good biocompatibility, high water dispersibility, and excellent stability under extreme conditions (i.e., ionic strength, pH, and temperature). The potential applicability of the as-synthesized quantum dot was tested by employing solution- and paper-based FL detection modes for Cr(VI) detection. The proposed solution- and paper-based FL sensors showed lower limit of detection (LOD) values of 0.01 and 0.4 μM, respectively. The as-constructed paper- and solution-based FL sensors proved the feasibility of sensitive, cost-effective, and on-site detection of Cr(VI).

Sustainable Preparation of Graphene Quantum Dots for Metal Ion Sensing Application

Over the past several years, graphene quantum dots (GQDs) have been extensively studied in water treatment and sensing applications because of their exceptional structure-related properties, intrinsic inert carbon property, eco-friendly nature, etc. This work reported on the preparation of GQDs from the ethanolic extracts of eucalyptus tree leaves by a hydrothermal treatment technique. Different heat treatment times and temperatures were used during the hydrothermal treatment technique. The optical, morphological, and compositional analyses of the green-synthesized GQDs were carried out. It can be noted that the product yield of GQDs showed the maximum yield at a reaction temperature of 300 °C. Further, it was noted that at a treatment period of 480 min, the greatest product yield of about 44.34% was attained. The quantum yields of prepared GQDs obtained after 480 min of treatment at 300 °C (named as GQD/300) were noted to be 0.069. Moreover, the D/G ratio of GQD/300 was noted to be 0.532 and this suggested that the GQD/300 developed has a nano-crystalline graphite structure. The TEM images demonstrated the development of GQD/300 with sizes between 2.0 to 5.0 nm. Furthermore, it was noted that the GQD/300 can detect Fe³⁺ in a very selective manner, and hence the developed GQD/300 was successfully used for the metal ion sensing application.

Facile and scalable synthesis of un-doped, doped and co-doped graphene quantum dots: a comparative study on their impact for environmental applications

In recent years, graphene quantum dots (GQDs) received huge attention due to their unique properties and potential applicability in different area. Here, we report simple and facile method for the synthesis of GQDs and their functionalization by doping and co-doping using different heteroatom under the optimized conditions. The doping and co-doping of GQDs using boron and nitrogen have been confirmed by FTIR and TEM. The UV-visible and fluorescence techniques have been used to study the optical properties and stability of functionalized GQDs. Further, the screening for enhancement of quantum yields of all GQDs were performed with fluorescence and UV-visible spectra under the optimized conditions. The average QY was obtained as 16.0%, 83.6%, 18.2% and 29.6% for GQDs, B-GQDs, N-GQDs and B,N-GQDs, respectively. The sensor was used to determine paraoxon in water samples. The LOD was observed to be 1.0 × 10-4 M with linearity range of 0.001 to 0.1 M. The RSD was calculated for the developed B,N-GQDs based sensor and observed to be 2.99% with the regression coefficient as 0.997. All the doped, co-doped and un-doped GQDs possess remarkable properties as a fluorescent probe.

Polyindole-Derived Nitrogen-Doped Graphene Quantum Dots-Based Electrochemical Sensor for Dopamine Detection

The sensitive monitoring of dopamine levels in the human body is of utmost importance since its abnormal levels can cause a variety of medical and behavioral problems. In this regard, we report the synthesis of nitrogen-doped graphene quantum dots (N-GQDs) from polyindole (PIN) via a facile single-step hydrothermal synthetic strategy that can act as an efficient electrochemical catalyst for the detection of dopamine (DA). The average diameter of N-GQDs was ∼5.2 nm and showed a C/N atomic ratio of ∼2.75%. These N-GQDs exhibit a cyan fluorescence color under irradiation from a 365 nm lamp, while PIN has no characteristic PL. The presence of richly N-doped graphitic lattices in the N-GQDs possibly accounts for the improved catalytic activity of N-GQDs/GCE towards electrocatalytic DA detection. Under optimum conditions, this novel N-GQDs-modified electrode exhibits superior selectivity and sensitivity. Moreover, it could detect as low as 0.15 nM of DA with a linear range of 0.001-1000 µM. In addition, the outstanding sensing attributes of the detector were extended to the real samples as well. Overall, our findings evidence that N-GQDs-based DA electrochemical sensors can be synthesized from PIN precursor and could act as promising EC sensors in medical diagnostic applications.

[Surface-enhanced Raman detection of deoxynivalenol allenol in agricultural products]

Fungal toxins are secondary metabolites of fungi. Food is highly susceptible to contamination by various fungal species that produce fungal toxins during production and storage. Fungal toxins can cause either acute or chronic poisoning from long-term, low-dose ingestion. Therefore, fungal toxins have become a topic of international interest as a food safety issue. Deoxynivalenol (DON) is a single-terminal sporam toxin produced predominantly by Fusarium graminae and Fusarium pinkosa. DON is globally one of the most common fungal toxins contaminating grain, food, and feed. Various methods have been applied for screening and detecting DON; however, these methods utilize expensive instruments and entail complex operations, poor repeatability, and low sensitivity. Therefore, the development of a simpler, more rapid, and sensitive sensing technology for DON detection is important for applications within the agriculture and food industry. Recently, surface-enhanced Raman scattering (SERS) has become a rapidly developing spectral analysis technology with unique advantages, including high sensitivity, high throughput, and rapid response rates. Therefore, attempts have been made to apply the SERS technique to detecting DON. However, due to the limitations concerning SERS substrates, the currently established SERS method exhibits serious problems, including low sensitivity and weak anti-interference ability, and cannot meet the requirements of sample detection. Recently, our group has prepared aggregated silver nanoparticles (a-AgNPs/CDs) with high SERS activity by using single-layer carbon-based dots (CDs) as a capping agent. Moreover, the obtained materials (a-AgNPs/CDs) were combined with hydrogel technology to prepare novel hydrogel SERS chips. The obtained SERS chips exhibited several advantages over traditional SERS substrates, such as high sensitivity, long-term stability, improved uniformity, and strong anti-interference capabilities. Herein, a novel SERS method for rapid screening and detection of DON in grains was established using a portable Raman spectrometer based on the developed hydrogel SERS chips. The main experimental conditions were optimized before the SERS detection of DON; this included the optimization of the hydrogel SERS chip soaking temperature and time in the DON solution. It was found that the optimal soaking temperature and time were 40 ℃ and 5 min, respectively. Under the optimal SERS detection conditions, the linear response range of DON was 1-10000 μg/kg (correlation coefficient (R2)=0.9967), and the limit of detection (LOD) was 0.14 μg/kg. Due to the unique pore size structure of the hydrogel, common sugar, protein, oil, pigment, and other interfering substances in the sample matrix were blocked outside the hydrogel. Therefore, only simple extraction was required while detecting complex samples. This method was applied to detecting DON in wheat flour, yielding recoveries of 97.3%-103% with relative standard deviations of 4.2%-5.0%. The established SERS method for DON detection exhibits a broader response range, high sensitivity, good repeatability, rapid response, simple operation, and strong anti-interference capability. This shows that the laboratory-constructed hydrogel SERS chip has excellent potential for rapid screening and detection of biotoxins in food.

Improved Forward Osmosis Performance of Thin Film Composite Membranes with Graphene Quantum Dots Derived from Eucalyptus Tree Leaves

The major challenges in forward osmosis (FO) are low water flux, high specific reverse solute flux (SRSF), and membrane fouling. The present work addresses these problems by the incorporation of graphene quantum dots (GQDs) in the polyamide (PA) layer of thin-film composite (TFC) membranes, as well as by using an innovative polyethersulfone nanofiber support for the TFC membrane. The GQDs were prepared from eucalyptus leaves using a facile hydrothermal method that requires only deionized water, without the need for any organic solvents or reducing agents. The nanofiber support of the TFC membranes was prepared using solution blow spinning (SBS). The polyamide layer with GQDs was deposited on top of the nanofiber support through interfacial polymerization. This is the first study that reports the fouling resistance of the SBS-nanofiber-supported TFC membranes. The effect of various GQD loadings on the TFC FO membrane performance, its long-term FO testing, cleaning efficiency, and organic fouling resistance were analyzed. It was noted that the FO separation performance of the TFC membranes was improved with the incorporation of 0.05 wt.% GQDs. This study confirmed that the newly developed thin-film nanocomposite membranes demonstrated increased water flux and salt rejection, reduced SRSF, and good antifouling performance in the FO process.

Improvement of Cs detection performance and formation of CsCl and Cs nanoparticles by tuning graphene oxide quantum dot-based nanocomposite

A new nanocomposite was developed using functionalized graphene oxide quantum dots (GOQDs) with cesium green molecules for the first time. Although the cesium green molecule works effectively only in the solid-state, without water, and in basic conditions, the functionalized GOQDs with cesium green made the nanocomposite work well as a cesium (Cs) detector in mixed solution (distilled water/THF). The nanocomposite can be employed as a Cs detector in both acidic and basic conditions. The present study revealed that the nanocomposite of GOQDs with cesium green showed an enhanced photoluminescence in basic conditions, while the intensity of the photoluminescence in acidic conditions is the superposition of the photoluminescence of the corresponding components. The photoluminescence of the nanocomposite was quenched (turned OFF) after Cs treatment in basic conditions. On the other hand, in the acidic conditions it was found that the photoluminescence intensity of this nanocomposite was enhanced (turned ON) by the Cs addition in two different Cs concentrations, 0.06 mmol L^-1 and 0.12 mmol L^-1. In addition, the movement of the nanocomposite (after Cs addition) under the electron beams through TEM measurement was observed. The formation of CsCl and Cs nanoparticles was identified. Specifically, the Cs cluster occurrence is discussed by taking into account the mobility effect of the adatoms on the composite layer under electron beam irradiation.

Recent Advances in Inflammatory Diagnosis with Graphene Quantum Dots Enhanced SERS Detection

Inflammatory diseases are some of the most common diseases in different parts of the world. So far, most attention has been paid to the role of environmental factors in the inflammatory process. The diagnosis of inflammatory changes is an important goal for the timely diagnosis and treatment of various metastatic, autoimmune, and infectious diseases. Graphene quantum dots (GQDs) can be used for the diagnosis of inflammation due to their excellent properties, such as high biocompatibility, low toxicity, high stability, and specific surface area. Additionally, surface-enhanced Raman spectroscopy (SERS) allows the very sensitive structural detection of analytes at low concentrations by amplifying electromagnetic fields generated by the excitation of localized surface plasmons. In recent years, the use of graphene quantum dots amplified by SERS has increased for the diagnosis of inflammation. The known advantages of graphene quantum dots SERS include non-destructive analysis methods, sensitivity and specificity, and the generation of narrow spectral bands characteristic of the molecular components present, which have led to their increased application. In this article, we review recent advances in the diagnosis of inflammation using graphene quantum dots and their improved detection of SERS. In this review study, the graphene quantum dots synthesis method, bioactivation method, inflammatory biomarkers, plasma synthesis of GQDs and SERS GQD are investigated. Finally, the detection mechanisms of SERS and the detection of inflammation are presented.

Hybridizing Silver Nanoparticles in Hydrogel for High-Performance Flexible SERS Chips

An ideal surface-enhanced Raman scattering (SERS) substrate should have high sensitivity, long-term stability, excellent repeatability, and strong anti-interference. In the present work, single-layer carbon-based dot (CD)-capped Ag nanoparticle aggregates (a-AgNPs/CDs) with high SERS activity are synthesized and hybridized with a hydrogel to prepare novel hydrogel SERS chips. Benefiting from the unique properties of a-AgNPs/CDs and the hydrogel, the constructed hydrogel SERS chips show excellent performances. Taking crystal violet detection as an example, the hydrogel SERS chips show a detection limit of around 1 × 10^-16 mol/L (high sensitivity), maintain above 96.40% of SERS activity even after 14 weeks of storage (long-term stability), and display point-to-point relative standard deviation (RSD) in one chip as low as 1.43% (outstanding repeatability) and RSD in different chips as low as 2.75% (excellent reproducibility). Furthermore, the self-extraction effect of the hydrogel enables the flexible hydrogel SERS chips to be used for analyzing various real samples including soybean milk, juices, and fruits without any complex pretreatment. For instance, the hydrogel SERS chips are able to detect trace thiram and 2-(4-thiazolyl)benzimidazole with the detection limits of 1 and 5 ppb in liquid samples, respectively, and of 1 and 2.5 ng/cm² on the peel of fruits, respectively. The self-extraction functional flexible SERS chips offer a reliable and convenient platform for the quick detection and on-site monitoring of chemical contaminants.

Strategic Modulation of Target-Specific Isolated Fe,Co Single-Atom Active Sites for Oxygen Electrocatalysis Impacting High Power Zn-Air Battery

An effective modulation of the active sites in a bifunctional electrocatalyst is essentially desired, and it is a challenge to outperform the state-of-the-art catalysts toward oxygen electrocatalysis. Herein, we report the development of a bifunctional electrocatalyst having target-specific Fe-N₄/C and Co-N₄/C isolated active sites, exhibiting a symbiotic effect on overall oxygen electrocatalysis performances. The dualism of N-dopants and binary metals lower the d-band centers of both Fe and Co in the Fe,Co,N-C catalyst, improving the overpotential of the overall electrocatalytic processes (ΔE_ORR-OER = 0.74 ± 0.02 V vs RHE). Finally, the Fe,Co,N-C showed a high areal power density of 198.4 mW cm^-2 and 158 mW cm^-2 in the respective liquid and solid-state Zn-air batteries (ZABs), demonstrating suitable candidature of the active material as air cathode material in ZABs.

Turn-off fluorescence of nitrogen and sulfur carbon quantum dots as effective fluorescent probes for determination of imatinib. Application to biological fluids

Nitrogen and sulfur carbon quantum dots(N,S-CQDs) as effective fluorescent nanoprobes were synthesized through one-step-hydrothermal method using thiosemicarbazide (as nitrogen and sulfur source) and citric acid (as carbon source). The highly fluorescent N,S-CQDs were subjected to various characterization techniques. The fluorescence of the synthesized N,S-CQDs is characterized by maximum fluorescence emission at 415 nm after excitation at 345 nm and a high quantum yield of 0.58. The native N,S-CQDs fluorescence is quantitatively quenched upon addition of imatinib (IMA), so they are used for its spectrofluorimetric determination in its pharmaceutical formulations and biological fluids. Under optimal conditions, N,S-CQDs exhibited a "turn-off" fluorescence response to IMA over the range of 1.0 to 15.0 µg/mL with a limit of quantification of 0.42 µg/mL and a lower detection limit of 0.14 µg/mL. Stern-Volmer equation was used to study the mechanism of quenching and it was found to occur through static quenching mechanism. The method was extended to the in-vitro determination of the drug in spiked human urine and plasma samples and the percent recoveries were satisfactory.

Room-Temperature Infrared Photodetectors with Zero-Dimensional and New Two-Dimensional Materials

Infrared photodetectors have received much attention for several decades due to their broad applications in the military, science, and daily life. However, for achieving an ideal signal-to-noise ratio and a very fast response, cooling is necessary in those devices, which makes them bulky and costly. Thus, room-temperature infrared photodetectors have emerged as a hot research direction. Novel low-dimensional materials with their easy fabrication and excellent photoelectronic properties provide a possible solution for room-temperature infrared photodetectors. This review aims to summarize the preparation methods and characterization of several low-dimensional materials (PbS, PbSe and HgTe, new two-dimensional materials) with great concern and the room-temperature infrared photodetectors based on them.

Patterning of graphene using wet etching with hypochlorite and UV light

Graphene patterning via etching is important for enhancing or controling the properties of devices and supporting their applications in micro- and nano-electronic fields. Herein, we present a simple, low-cost, and scalable wet etching method for graphene patterning. The technique uses hypochlorite solution combined with ultraviolet light irradiation to rapidly remove unwanted graphene areas from the substrate. Raman spectroscopy, atomic force microscopy, scanning electron microscopy, and optical microscopy results showed that well-patterned graphene with micrometer scale regions was successfully prepared. Furthermore, graphene field effect transistor arrays were fabricated, and the obtained devices exhibited good current–voltage characteristics, with maximum mobility of ~ 1600 cm²/Vs, confirming the feasibility of the developed technique.

Utilization of N,S-Doped Carbon Dots as a Fluorescent Nanosensor for Determination of Cromolyn Based on Inner Filter Effect; Application to Aqueous Humor

A simple and eco-friendly hydrothermal technique is used to prepare water soluble N and S co-doped carbon quantum dots probe (N,S-CQDs) from thiosemicarbazide and citric acid. Several characterization techniques were performed in order to ensure well- synthesis of highly luminescent N,S-CQDs. The prepared probe exhibited analytical potential as optical nanosensor for the spectrofluorimetric determination of cromolyn sodium (CRO) in its pharmaceutical dosage forms and aqueous humor. The emission intensity of the synthesized N,S-CQDs was measured at 411 nm after excitation at 345 nm. Addition of increasing concentrations of CRO to N,S-CQDs led to quenching of its fluorescence intensity. CRO was investigated within wide concentration range of 10.0 to 150.0 μM with limit of detection of 2.0 μM and limit of quantification of 6.0 μM. The quenching of fluorescent N,S-CQDs occurs through inner filter effect (IFE). The developed spectrofluorimetric method was successfully optimized and validated according to International Council of Harmonization (ICH). Method greenness is proved through using both Eco-scale and AGREE approaches.

Waste derived approach towards wealthy fluorescent N-doped graphene quantum dots for cell imaging and H2O2 sensing applications

Herein, we report the synthesis of a highly fluorescent nitrogen doped graphene quantum dots (N-GQDs) from waste precursors such as melamine sponge and arjuna bark via a microwave treatment and its functional and morphological characterization using various spectroscopy techniques such as optical, FTIR, XPS and TEM. The as-prepared aqueous N-GQD (dia. 2-3 nm) was used for the bio-imaging application using breast carcinoma cell line (MDA-MB-231) as a model, and the locations of all cells in the cytoplasm as well as nuclei were observed to stain brightly in blue fluorescent color successfully. In addition to that, the aqueous N-GQD showed fluorescence quenching behavior in the presence of hydrogen peroxide, which was exploited to sense H₂O₂, a probable toxin generated in the diseased cells. Importantly, the cell cytotoxicity was measured and found to be non-toxic (70% survival) to the MDA-MB-231 cells even at very high concentration (∼1.8 mg/ml) of the synthesized N-GQD. This study revealing excellent biocompatibility and imaging of the model cancer cells, and sensing of H₂O₂ by fluorescent quenching, indicates potential in-vivo cell culture applications of the prepared fluorescent N-GQD.

Ultrasound-aided synthesis of gold-loaded boron-doped graphene quantum dots interface towards simultaneous electrochemical determination of guanine and adenine biomolecules

To acquire substantial electrochemical signals of guanine-GUA and adenine-ADE present in deoxyribonucleic acid-DNA, it is critical to investigate innovative electrode materials and their interfaces. In this study, gold-loaded boron-doped graphene quantum dots (Au@B-GQDs) interface was prepared via ultrasound-aided reduction method for monitoring GUA and ADE electrochemically. Transmission electron microscopy-TEM, Ultraviolet-Visible spectroscopy-UV-Vis, Raman spectroscopy, X-ray photoelectron spectroscopy-XPS, cyclic voltammetry-CV, and differential pulse voltammetry-DPV were used to examine the microstructure of the fabricated interfaceand demonstrate its electrochemical characteristics. The sensor was constructed by depositing the as-prepared Au@B-GQDs as a thin layer on a glassy carbon-GC electrode by the drop-casting method and carried out the electrochemical studies. The resulting sensor exhibited a good response with a wide linear range (GUA = 0.5-20 μM, ADE = 0.1-20 μM), a low detection limit-LOD (GUA = 1.71 μM, ADE = 1.84 μM), excellent sensitivity (GUA = 0.0820 µAµM^-1, ADE = 0.1561 µAµM^-1) and selectivity with common interferents results from biological matrixes. Furthermore, it seems to have prominentselectivity, reproducibility, repeatability, and long-lastingstability. The results demonstrate that the fabricated Au@B-GQDs/GC electrode is a simple and effective sensing platform for detecting GUA and ADE in neutral media at low potential as it exhibited prominent synergistic impact and outstanding electrocatalytic activity corresponding to individual AuNPs and B-GQDs modified electrodes.

Carbon dots: a novel platform for biomedical applications

Carbon dots (CDs) are a recently synthesised class of carbon-based nanostructures known as zero-dimensional (0D) nanomaterials, which have drawn a great deal of attention owing to their distinctive features, which encompass optical properties (e.g., photoluminescence), ease of passivation, low cost, simple synthetic route, accessibility of precursors and other properties. These newly synthesised nano-sized materials can replace traditional semiconductor quantum dots, which exhibit significant toxicity drawbacks and higher cost. It is demonstrated that their involvement in diverse areas of chemical and bio-sensing, bio-imaging, drug delivery, photocatalysis, electrocatalysis and light-emitting devices consider them as flawless and potential candidates for biomedical application. In this review, we provide a classification of CDs within their extended families, an overview of the different methods of CDs preparation, especially from natural sources, i.e., environmentally friendly and their unique photoluminescence properties, thoroughly describing the peculiar aspects of their applications in the biomedical field, where we think they will thrive as the next generation of quantum emitters. We believe that this review covers a niche that was not reviewed by other similar publications.

Spectroscopic investigation on the binding interactions between graphene quantum dots and carbonic anhydrase

As a new member of the nanomaterials family, ultrasmall graphene quantum dots (GQDs) have shown broad application prospects in the field of biomedicine, but the analysis of their biological effects at the molecular level is yet limited. Herein, carbonic anhydrase (CA) was selected as a model protein to assess the interactions between GQDs and biomacromolecules. A range of spectroscopic techniques were employed to systematically investigate the binding interactions between GQDs and CA and the catalytic function of CA in the presence of GQDs was evaluated. Experimental results showed that GQDs could quench the intrinsic fluorescence of CA and the concentration dependent quenching efficiency exhibited an obvious deviation from the linear plot, indicating a static binding mode. Further investigation suggested that van der Waal interactions and hydrogen bonding were the main driving forces. Additionally, circular dichroism measurement showed that the binding of GQDs induced slight conformational changes of CA. The catalytic capability assessment proved that these binding interactions resulted in the reduction of the biological functions of CA. This comprehensive study provided important insight into the interaction of GQDs with biomacromolecules, which would be crucial for the further applications of GQDs and other nanomaterials in the biomedical field.