Ultrasensitive early detection of insulin antibody employing novel electrochemical nano-biosensor based on controllable electro-fabrication process

An ultrasensitive novel electrochemical nano-biosensor for rapid detection of insulin antibodies against diabetes antigens was developed in this research. The presence of insulin antibodies has been demonstrated to be a strong predictor for the development of type 1 diabetes in individuals who do not have diabetes but are genetically predisposed. The proposed nano-biosensor fabrication process was based on the optimized sequential electropolymerization of polyaniline and electrodeposition of gold nanoparticles on the surface of the functionalized gold electrode. The morphological and chemical characterization of the modified electrode was studied by field emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDX), atomic force microscopy (AFM), Fourier transform infrared spectroscopy (FTIR), and micro Raman spectroscopy. Moreover, the role of each component in the modification of the electrode was studied by electrochemical methods systematically. After immobilizing insulin antigen and blocking with bovine serum albumin, the nano-biosensor was used for determining different concentrations of insulin antibody under the optimal conditions. This nano-biosensor could respond to insulin antibody with a linear calibration range from 0.001 ng ml^-1 to 1000 ng ml^-1 with the detection limit of 0.017 pg ml^-1 and 0.034 pg ml^-1 and selectivity of 18.544 μA ng^-1 ml.cm^-2 and 31.808 μA ng^-1 ml.cm^-2 via differential pulse voltammetry and square wave voltammetry, respectively. This novel nano-biosensor exhibited a short response time, high sensitivity, and good reproducibility. It was successfully used in determining the insulin antibody in human samples with a standard error of less than 0.178. Therefore, the nano-biosensor has the potential for the application of early detection of type 1 diabetes. To our best knowledge, label-free electrochemical detection of insulin antibody based on immunosensor is developed for the first time.

Biocompatible Osmium Telluride-Polypyrrole Nanocomposite Material: Application in Prostate Specific Antigen Immunosensing

Prostate cancer is a dominant global threat to society. It affects nearly 4000 men in South Africa annually, making it the second most threatening cancerous disease after lung cancer. A potential serological biomarker to monitor early diagnosis of prostate cancer is prostate specific antigen (PSA). We used the PSA biomarker in our work to develop an extremely sensitive electrochemical immunosensor to achieve low detection limits. The fabrication steps followed with the combination of thioglycolic acid capped osmium telluride quantum dots (TGA-OsTe2QD)-polypyrrole (PPy) nanocomposite and prostate specific antigen modified on a glassy carbon electrode. The UV-Vis signatures of TGA-OsTe2QD-PPy showed an absorption band at 262 nm which is attributed to the PPy and TGA-OsTe2QD composite. This band corresponds to the energy band gap of 4.4 and 5.4 eV. The CV responses of BSA|Ab|TGA-OsTe2QD|PPy|GCE modified electrode to prostate specific antigen (PSA) was studied within a range of 0–16 ng/mL PSA that was linear, herein referred to as liner range (LR), which produced a limit of detection (LOD) value of 0.36 ng/mL PSA. The values of the immunosensor’s calibration parameters (LR and LOD) make them suitable for real sample application, due to their coverage of the PSA concentration range (0–14 ng/mL) that is of clinical importance.

Electrochemical prostate-specific antigen biosensors based on electroconductive nanomaterials and polymers

Prostate cancer (PCa), the second most malignant neoplasm in men, is also the fifth leading cause of cancer-related deaths in men globally. Unfortunately, this malignancy remains largely asymptomatic until late-stage emergence when treatment is limited due to the lack of effective metastatic PCa therapeutics. Due to these limitations, early PCa detection through prostate-specific antigen (PSA) screening has become increasingly important, resulting in a more than 50% decrease in mortality. Conventional assays for PSA detection, such as enzyme-linked immunosorbent assay (ELISA), are labor intensive, relatively expensive, operator-dependent and do not provide adequate sensitivity. Electrochemical biosensors overcome these limitations because they are rapid, cost-effective, simple to use and ultrasensitive. This article reviews electrochemical PSA biosensors using electroconductive nanomaterials such as carbon-, metal-, metal oxide- and peptide-based nanostructures, as well as polymers to significantly improve conductivity and enhance sensitivity. Challenges associated with the development of these devices are discussed thus providing additional insight into their analytic strength as well as their potential use in early PCa detection.

Recognizing conductive islands in polymeric redox surfaces using electrochemical-coupled vibrational spectromicroscopy

We introduce a set up by coupling multiplex FTIR microscopy to electrochemistry through a home-made spectroelectrochemical cell to observe real time changes in the electronic states of polymeric islands by monitoring the oxidation states of polyaniline (PANI). The resultant technique, called electrochemical-coupled vibrational spectromicroscopy (EVSM), enables the measurement of structural changes in the conductive islands of PANI with the spatial resolution as high as 2.5 μm. Unique 2D and 3D chemical maps obtained by the integration of the spectral bands in the subtractively normalized interfacial infrared (SNIFTIR) spectra reveal electrochemical heterogeneity, showing promising topological properties control for conducting polymer-based electronic devices.

Fabrication of a sensitive label free electrochemical immunosensor for detection of prostate specific antigen using functionalized multi-walled carbon nanotubes/polyaniline/AuNPs

The aim of this research is to introduce a novel label free electrochemical immunosensor based on glassy carbon electrode (GCE) modified with carboxylated carbon nanotubes (COOH-MWCNTs)/polyaniline (PANI)/gold nanoparticles (AuNPs) for the detection of prostate specific antigen (PSA). The AuNPs were utilized as a connector for PSA antibody immobilization through NH₂ groups on antibody. Investigations on modified electrode surface were performed by FT-IR spectrum, scanning electron microscope (SEM) and energy dispersive X-ray spectroscopy (EDS) to evaluate the synthesized nanocomposite and modified electrode surface. As a sensitive analytical method for the detection of PSA, differential pulse voltammetry (DPV) was employed in different ranges of antigen concentration, 1.66 ag·mL^-1 to 1.3 ng·mL^-1. In addition, the detection limit was obtained 0.5 pg·mL^-1, from the linear relationship between antigen concentration log and peak current. Also, the proposed immunosensor was carried out for the determination of PSA in human serum samples, indicating recoveries ranging from 92 to 104%. Finally, it should be noted that the reproducibility and specificity, along with the stability of the present immunosensor were examined, and satisfactory findings were obtained, thus proving it as a promising PSA immunosensor.

Polymeric immunosensors for tumor detection

Cancer is a broad-spectrum disease which is spread globally, having high mortality rates. This results from genetic, epigenetic and molecular abnormalities caused by various mutations. The main reason behind this critical problem lies in its diagnostics, the late detection of the disease is the root cause of all this. This can be managed well by the timely diagnosis of cancer by means of the tumor biomarkers present in the body fluids such as serum, blood, and urine. These tumor biomarkers are present in normal conditions as well, but their concentrations are altered in the presence of a malignant tumor. Prolonged studies have reported that immunosensors can be used to detect the minimal amount of biomarkers present in the sample and also provides point-of-care detection. The recent investigations demonstrated the use of polymers along with immunosensors for enhancing their selectivity and sensitivity towards the biomarkers and making them even more efficient. This review focuses on the variety of tumor biomarkers, different types of immunosensors and polymeric immunosensors using different polymers like polypyrrole, polyaniline, PHEMA, etc.

Metal-polymer hybrid nanomaterial for impedimetric detection of human papillomavirus in cervical specimens

The human papillomavirus (HPV) is one of the main sexually transmitted pathogens that infect the anogenital epithelium and mucous membranes. HPV genotypes can be classified as high and low oncogenic risk, with infection by the former resulting in cervical cancer in approximately 100 % of the cases. In this work, we developed an ultrasensitive electrochemical biosensor for the detection and identification of different HPV genotypes. A nanostructured platform based on a matrix of polyaniline (PANI) containing gold nanoparticles (AuNps) was designed for the chemical immobilization of a DNA probe capable of recognizing different HPV types. Cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and atomic force microscopy (AFM) were used to characterize the genosensor. The impedimetric responses indicate that the proposed sensor was able to detect HPV (types 6, 11, 16, 31, 33, 45, and 58) in cervical specimens (cDNA samples). We obtained different profiles of electrochemical responses for the high and low-risk HPV genotypes. By adopting a three-dimensional quantitative analysis of impedance response variables, it was possible to identify the existence of a pattern of association for samples of high oncogenic risk, which may lead to the differential diagnosis of HPV. The biosensor demonstrated an excellent analytical performance for the detection of HPV genotypes with high sensibility and selectivity. The genosensor exhibited a linear range of response in the 1 pg μL^-1 to 100 pg μL^-1 range. Besides, a limit of detection (LOD) of 2.74 pg μL^-1 and 7.43 pg μL^-1 was obtained for HPV11 and HPV16, respectively, with regression coefficients of 99.88 % and 99.47 %. Thus, the proposed sensor may serve as a good prognostic indicator for patients infected with papillomavirus.

Fiber optic sensor based on ZnO nanowires decorated by Au nanoparticles for improved plasmonic biosensor

Fiber-optic-based localized surface plasmon resonance (FO-LSPR) sensors with three-dimensional (3D) nanostructures have been developed. These sensors were fabricated using zinc oxide (ZnO) nanowires and gold nanoparticles (AuNPs) for highly sensitive plasmonic biosensing. The main achievements in the development of the biosensors include: (1) an extended sensing area, (2) light trapping effect by nanowires, and (3) a simple optical system based on an optical fiber. The 3D nanostructure was fabricated by growing the ZnO nanowires on the cross-section of optical fibers using hydrothermal synthesis and via immobilization of AuNPs on the nanowires. The proposed sensor outputted a linear response according to refractive index changes. The 3D FO-LSPR sensor exhibited an enhanced localized surface plasmon resonance response of 171% for bulk refractive index changes when compared to the two-dimensional (2D) FO-LSPR sensors where the AuNPs are fixed on optical fiber as a monolayer. In addition, the prostate-specific antigen known as a useful biomarker to diagnose prostate cancer was measured with various concentrations in 2D and 3D FO-LSPR sensors, and the limits of detection (LODs) were 2.06 and 0.51 pg/ml, respectively. When compared to the 2D nanostructure, the LOD of the sensor with 3D nanostructure was increased by 404%.

Impedimetric Immunosensor Utilizing Polyaniline/Gold Nanocomposite-Modified Screen-Printed Electrodes for Early Detection of Chronic Kidney Disease

The presence of small amounts of human serum albumin (HSA) in urine or microalbuminuria (30–300 µg/mL) is a valuable clinical biomarker for the early detection of chronic kidney disease (CKD). Herein, we report on the development of an inexpensive and disposable immunosensor for the sensitive, specific, and label-free detection of HSA using electrochemical impedance spectroscopy (EIS). We have utilized a simple one-step screen-printing protocol to fabricate the carbon-based three-electrode system on flexible plastic substrates. To enable efficient antibody immobilization and improved sensitivity, the carbon working electrode was sequentially modified with electropolymerized polyaniline (PANI) and electrodeposited gold nanocrystals (AuNCs). The PANI matrix serves as an interconnected nanostructured scaffold for homogeneous distribution of AuNCs and the resulting PANI/AuNCs nanocomposite synergically improved the immunosensor response. The PANI/AuNCs-modified working electrode surface was characterized using scanning electron microscopy (SEM) and the electrochemical response at each step was analyzed using EIS in a ferri/ferrocyanide redox probe solution. The normalized impedance variation during immunosensing increased linearly with HSA concentration in the range of 3–300 µg/mL and a highly repeatable response was observed for each concentration. Furthermore, the immunosensor displayed high specificity when tested using spiked sample solutions containing different concentrations of actin protein and J82 cell lysate (a complex fluid containing a multitude of interfering proteins). Consequently, these experimental results confirm the feasibility of the proposed immunosensor for early diagnosis and prognosis of CKD at the point of care.

Electrochemical sensors and biosensors based on the use of polyaniline and its nanocomposites: a review on recent advances

Polyaniline and its composites with nanoparticles have been widely used in electrochemical sensor and biosensors due to their attractive properties and the option of tuning them by proper choice of materials. The review (with 191 references) describes the progress made in the recent years in polyaniline-based biosensors and their applications in clinical sensing, food quality control, and environmental monitoring. A first section summarizes the features of using polyaniline in biosensing systems. A subsequent section covers sensors for clinical applications (with subsections on the detection of cancer cells and bacteria, and sensing of glucose, uric acid, and cholesterol). Further sections discuss sensors for use in the food industry (such as for sulfite, phenolic compounds, acrylamide), and in environmental monitoring (mainly pesticides and heavy metal ions). A concluding section summarizes the current state, highlights some of the challenges currently compromising performance in biosensors and nanobiosensors, and discusses potential future directions. Graphical abstract Schematic presentation of electrochemical sensor and biosensors applications based on polyaniline/nanoparticles in various fields of human life including medicine, food industry, and environmental monitoring. The simultaneous use of suitable properties polyaniline and nanoparticles can provide the fabrication of sensing systems with high sensitivity, short response time, high signal/noise ratio, low detection limit, and wide linear range by improving conductivity and the large surface area for biomolecules immobilization.

Conjugated Polymers for Assessing and Controlling Biological Functions

The field of organic bioelectronics is advancing rapidly in the development of materials and devices to precisely monitor and control biological signals. Electronics and biology can interact on multiple levels: organs, complex tissues, cells, cell membranes, proteins, and even small molecules. Compared to traditional electronic materials such as metals and inorganic semiconductors, conjugated polymers (CPs) have several key advantages for biological interactions: tunable physiochemical properties, adjustable form factors, and mixed conductivity (ionic and electronic). Herein, the use of CPs in five biologically oriented research topics, electrophysiology, tissue engineering, drug release, biosensing, and molecular bioelectronics, is discussed. In electrophysiology, implantable devices with CP coating or CP-only electrodes are showing improvements in signal performance and tissue interfaces. CP-based scaffolds supply highly favorable static or even dynamic interfaces for tissue engineering. CPs also enable delivery of drugs through a variety of mechanisms and form factors. For biosensing, CPs offer new possibilities to incorporate biological sensing elements in a conducting matrix. Molecular bioelectronics is today used to incorporate (opto)electronic functions in living tissue. Under each topic, the limits of the utility of CPs are discussed and, overall, the major challenges toward implementation of CPs and their devices to real-world applications are highlighted.

Carbon Nanotubes Modified With Au for Electrochemical Detection of Prostate Specific Antigen: Effect of Au Nanoparticle Size Distribution

Different functionalized Multi-Wall Carbon Nanotube and gold nanoparticles (AuNPs) were synthesized as biosensor electrodes. These materials have been applied to the detection of the Prostate Specific Antigen (PSA). The synthesis of AuNPs was carried out using polyvinylpyrrolidone (PVP) as protecting agent. The PVP/Au molar ratio (0.5 and 50) controls the nanoparticle size distribution, obtaining a wide and narrow distribution with an average diameter of 9.5 and 6.6 nm, respectively. Nanoparticle size distribution shows an important effect in the electrochemical performance of the biosensor, increasing the electrochemical active surface area (EASA) and promoting the electron-transfer from the redox probe (Ferrocene/Ferrocenium) to the electrode. Furthermore, a narrow and small nanoparticle size distribution enhances the amount of antibodies immobilized on the transducer material and the performance during the detection of the PSA. Significant results were obtained for the quantification of PSA, with a limit of detection of 1 ng·ml⁻¹ and sensitivities of 0.085 and 0.056 μA·mL·ng⁻¹ for the two transducer materials in only 5 min of detection.

Carbon fiber based electrochemical sensor for sweat cortisol measurement

This study examines the use of a conductive carbon fiber to construct a flexible biosensing platform for monitoring biomarkers in sweat. Cortisol was chosen as a model analyte. Functionalization of the conductive carbon yarn (CCY) with ellipsoidal Fe₂O₃ has been performed to immobilize the antibodies specific to cortisol. 1-Ethyl-3-(3-dimethylaminopropyl) carbodiimide (EDC) and N-Hydroxysuccinimide (NHS) chemistry has been used to immobilize the antibodies onto the Fe₂O₃ modified CCY. Crystallinity, structure, morphology, flexibility, surface area, and elemental analysis were studied using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), Raman spectroscopy, Field emission scanning electron microscopy with energy dispersive X-ray spectroscopy (FE-SEM/EDS) and Brunauer–Emmett–Teller (BET) analysis. Mechanical properties of the fiber such as tensile strength, young’s modulus have also been investigated. Under optimal parameters, the fabric sensor exhibited a good linearity (r² = 0.998) for wide a linear range from 1 fg to 1 μg with a detection limit of 0.005 fg/mL for the sensitive detection of cortisol. Repeatability, reliability, reproducibility, and anti-interference properties of the current sensor have been investigated. Detection of cortisol levels in human sweat samples has also been investigated and the results were validated with commercial chemiluminescence immunoassay (CLIA) method.

Preparation of Au nanoparticles on a magnetically responsive support via pyrolysis of a Prussian blue composite

A strategy is described for the direct preparation of Au nanoparticles (AuNPs) on a Fe-based support, coated with porous carbon (PC), via pyrolysis of an AuCN functionalised Prussian Blue (PB) metal organic framework (MOF). The composite starting material was prepared with an even distribution of AuCN on the surface via galvanic exchange of PB with a gold salt in solution. The resulting structures after pyrolysis were shown to be active Au-based nanomaterials for model applications including catalysis (4-nitrophenol reduction) and electroanalysis (arsenic (III) detection), suggesting broad application where Au nanoparticles are required at a liquid-solid interface. The Fe based support was seen to consist of Fe, Fe₃C and Fe₄C phases, and the carbon coating increased the stability and improved the conductivity of the materials. The temperature of pyrolysis was seen to affect the activity of the supported nanoparticles, with an increased Au surface area obtained at the higher pyrolysis temperature (650 °C) tested. A general strategy is thus confirmed for preparation of noble metal nanoparticles evenly distributed on a magnetic support, allowing easy separation of catalysts from products in heterogeneous applications.

A voltammetric biosensor based on poly(o-methoxyaniline)-gold nanocomposite modified electrode for the simultaneous determination of dopamine and folic acid

Dopamine (DA) and Folic acid (FA) are co-existing compounds in biological fluids that plays a vital role in central nervous system and human metabolism. DA is an important neurotransmitter in the brain's neural circuits and its diminution often results in Parkinson's disease. Folate is another form of folic acid, which is known as one of the B vitamins. It is utilized as an additive by women during pregnancy in order to prevent the neural tube defects. The present study reports on the fabrication of electrochemical sensor for the simultaneous determination of DA and FA using poly(o-methoxyaniline)-gold (POMA-Au) nanocomposite. The POMA-Au nanocomposite was prepared via insitu chemical oxidative polymerization method and characterized using X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM) and X-ray photoelectron spectroscopy (XPS). The suitability of POMA-Au nanocomposite as a modifier for the electrocatalytic detection of DA and FA in aqueous solution was investigated by cyclic voltammetry (CV), differential pulse voltammetry (DPV) and chronoamperometry (CA) techniques. The fabricated POMA-Au/GCE sensor exhibited sharp and intense peaks towards the electro-oxidation of DA and FA as compared to bare electrode. The sensor exhibited the promising electron mediating behavior with well separated oxidation peaks with a potential difference of about 350.0 mV. The linear calibration plots of DA and FA were obtained from 10.0 to 300.0 μM and 0.5 to 900.0 μM with the detection limits of 0.062 μM and 0.090 μM, respectively. The reliability of this sensor was verified to be precise as well as sensitive for the determination of DA and FA in pharmaceutical samples and human urine samples.

Current Technologies of Electrochemical Immunosensors: Perspective on Signal Amplification

An electrochemical immunosensor employs antibodies as capture and detection means to produce electrical charges for the quantitative analysis of target molecules. This sensor type can be utilized as a miniaturized device for the detection of point-of-care testing (POCT). Achieving high-performance analysis regarding sensitivity has been one of the key issues with developing this type of biosensor system. Many modern nanotechnology efforts allowed for the development of innovative electrochemical biosensors with high sensitivity by employing various nanomaterials that facilitate the electron transfer and carrying capacity of signal tracers in combination with surface modification and bioconjugation techniques. In this review, we introduce novel nanomaterials (e.g., carbon nanotube, graphene, indium tin oxide, nanowire and metallic nanoparticles) in order to construct a high-performance electrode. Also, we describe how to increase the number of signal tracers by employing nanomaterials as carriers and making the polymeric enzyme complex associated with redox cycling for signal amplification. The pros and cons of each method are considered throughout this review. We expect that these reviewed strategies for signal enhancement will be applied to the next versions of lateral-flow paper chromatography and microfluidic immunosensor, which are considered the most practical POCT biosensor platforms.

Reduced graphene oxide/BiFeO3 nanohybrids-based signal-on photoelectrochemical sensing system for prostate-specific antigen detection coupling with magnetic microfluidic device

A novel magnetic controlled photoelectrochemical (PEC) sensing system was designed for sensitive detection of prostate-specific antigen (PSA) using reduced graphene oxide-functionalized BiFeO₃ (rGO-BiFeO₃) as the photoactive material and target-triggered hybridization chain reaction (HCR) for signal amplification. Remarkably enhanced PEC performance could be obtained by using rGO-BiFeO₃ as the photoelectrode material due to its accelerated charge transfer and improved the visible light absorption. Additionally, efficient and simple operation could be achieved by introducing magnetic controlled flow-through device. The assay mainly involved in anchor DNA-conjugated magnetic bead (MB-aDNA), PSA aptamer/trigger DNA (Apt-tDNA) and two glucose oxidase-labeled hairpins (H1-GOx and H2-GOx). Upon addition of target PSA, the analyte initially reacted with the aptamer to release the trigger DNA, which partially hybridized with the anchor DNA on the MB. Thereafter, the unpaired trigger DNA on the MB opened the hairpin DNA structures in sequence and propagated a chain reaction of hybridization events between two alternating hairpins to form a long nicked double-helix with numerous GOx enzymes on it. Subsequently, the enzymatic product (H₂O₂) generated and consumed the photo-excited electrons from rGO-BiFeO₃ under visible light irradiation to enhance the photocurrent. Under optimal conditions, the magnetic controlled PEC sensing system exhibited good photocurrent responses toward target PSA within the linear range of 0.001 - 100ng/mL with a detection limit of 0.31pg/mL. Moreover, favorable selectivity, good stability and satisfactory accuracy were obtained. The excellent analytical performance suggested that the rGO-BiFeO₃-based PEC sensing platform could be a promising tool for sensitive, efficient and low cost detection of PSA in disease diagnostics.

Reduced graphene oxide-functionalized FeOOH for signal-on photoelectrochemical sensing of prostate-specific antigen with bioresponsive controlled release system

A new and signal-on photoelectrochemical (PEC) sensing platform was successfully designed for the sensitive detection of prostate-specific antigen (PSA), using reduced graphene oxide- functionalized iron oxyhydroxide (FeOOH-rGO) as the photoactive material, accompanying target-responsive controlled release system to achieve the signal amplification. Introduction of rGO as electron mediator greatly facilitated the electron transfer from FeOOH to electrode under visible light, which inhibited the electron-hole recombination to enhance the photo-activity of FeOOH-rGO. Additionally, the bioresponsive release system was controlled via the reaction of target PSA with the aptamer capped glucose-loading mesoporous silica nanoparticle (MSN) to release numerous glucose molecules (as the electron donors) for the amplification of the photocurrent generated from FeOOH-rGO. Thus, more glucose molecules could be released and enhanced photocurrents could be obtained with the increasing PSA concentrations. Experimental results showed that the photocurrents of the PEC sensing platform were linearly dependent on the logarithm of PSA concentrations from 1.0pg/mL to 100ng/mL. Moreover, the PEC sensing system afforded good stability and specificity, and its accuracy matched well with the commercial PSA enzyme-linked immunosorbent assay (ELISA) kit. The excellent performance of the PEC sensing platform indicated its promising prospect as a useful tool for PSA detection in practical application.

Electrical and Electrochemical Properties of Conducting Polymers

Conducting polymers (CPs) have received much attention in both fundamental and practical studies because they have electrical and electrochemical properties similar to those of both traditional semiconductors and metals. CPs possess excellent characteristics such as mild synthesis and processing conditions, chemical and structural diversity, tunable conductivity, and structural flexibility. Advances in nanotechnology have allowed the fabrication of versatile CP nanomaterials with improved performance for various applications including electronics, optoelectronics, sensors, and energy devices. The aim of this review is to explore the conductivity mechanisms and electrical and electrochemical properties of CPs and to discuss the factors that significantly affect these properties. The size and morphology of the materials are also discussed as key parameters that affect their major properties. Finally, the latest trends in research on electrochemical capacitors and sensors are introduced through an in-depth discussion of the most remarkable studies reported since 2003.

PEGylated Polyaniline Nanofibers: Antifouling and Conducting Biomaterial for Electrochemical DNA Sensing

Biofouling arising from nonspecific adsorption is a substantial outstanding challenge in diagnostics and disease monitoring, and antifouling sensing interfaces capable of reducing the nonspecific adsorption of proteins from biological complex samples are highly desirable. We present herein the preparation of novel composite nanofibers through the grafting of polyethylene glycol (PEG) polymer onto polyaniline (PANI) nanofibers and their application in the development of antifouling electrochemical biosensors. The PEGylated PANI (PANI/PEG) nanofibers possessed large surface area and remained conductive and at the same time demonstrated excellent antifouling performances in single protein solutions as well as complex human serum samples. Sensitive and low fouling electrochemical biosensors for the breast cancer susceptibility gene (BRCA1) can be easily fabricated through the attachment of DNA probes to the PANI/PEG nanofibers. The biosensor showed a very high sensitivity to target BRCA1 with a linear range from 0.01 pM to 1 nM and was also efficient enough to detect DNA mismatches with satisfactory selectivity. Moreover, the DNA biosensor based on the PEGylated PANI nanofibers supported the quantification of BRCA1 in complex human serum, indicating great potential of this novel biomaterial for application in biosensors and bioelectronics.

A new strategy for label-free electrochemical immunoassay based on "gate-effect" of β-cyclodextrin modified electrode

A novel label-free electrochemical immunoassay was developed for prostate-specific antigen (PSA) detection via using β-cyclodextrin (β-CD) assembled layer created gates for the electron transfer of probe. To construct the sensor, a gold electrode was self-assembled with monoclonal anti-PSA antibody labeled 6-mercapto-β-cyclodextrin. Interspaces among β-CD molecules in the layer were automatically formed on gold electrode, which act as the channel of the electron transfer of [Fe(CN)6](3-/4-) probe. When PSA bind with anti-PSA, it can block these channels on the electrode surface due to their steric hindrance effect, resulting in the decrease in redox current of the probe. Through such a gate-controlled effect, ultra trace amount of PSA may make the currents change greatly after the immunoreaction, which enhanced the signal-to-noise ratio to achieve the amplification effect. By evaluating the logarithm of PSA concentrations, the immunosensor had a good linear response to the current changes with a detection limit of 0.3 pg/mL (S/N = 3) when PSA concentration ranged from 1.0 pg/mL to 1.0 ng/mL. The label-free immunosensor exhibited satisfactory performances in sensitivity, repeatability as well as specificity.

Grafting of a peptide probe for Prostate-Specific Antigen detection using diazonium electroreduction and click chemistry

The main objective of this work was to validate a label-free electrochemical method of protein detection using peptides as capture probes. As a proof-of-concept, we used a 7 amino acids sequence (HSSKLQL) specific for Prostate Specific Antigen. We investigated various electrografting conditions of two anilines (2-[(4-aminophenyl)sulfanyl]-8-hydroxy-1,4-naphthoquinone and 4-azidoaniline) further converted in situ into their corresponding diazonium salts on glassy carbon electrodes. It was demonstrated that the best method to obtain a mixed layer is the simultaneous electroreduction of the two diazonium salts. 4-azidoaniline was used to covalently immobilize the ethynyl-functionalized peptide probe by click coupling, and the hydroxynaphthoquinone derivative plays the role of electrochemical transducer of the peptide-protein recognition. The proteolytic activity of PSA towards a small peptide substrate carrying streptavidin at its distal end was also investigated to design an original sensing architecture leading to a reagentless, label free, and "signal-on" PSA sensor. Without optimization, the limit of quantification can be estimated in the nM to pM range.

Label-free Electrochemiluminescent Immunosensor for Detection of Prostate Specific Antigen based on Aminated Graphene Quantum Dots and Carboxyl Graphene Quantum Dots

Prostate-specific antigen (PSA) was used as the model, an ultrasensitive label-free electrochemiluminescent immunosensor was developed based on graphene quantum dots. Au/Ag-rGO was sythsized and used as electrode material to load a great deal of graphene quantum dots due to the large surface area and excellent electron conductivity. After aminated graphene quantum dots and acarboxyl graphene quantum dots were modified onto the electrode, the ECL intensity was much high using K2S2O8 as coreactant. Then, antibody of PSA was immobilized on the surface of modified electrode surface through the adsorption of Au/Ag toward proteins, leading to the decrease of the ECL intensity. As proven by ECL spectra test and electrochemical impedance spectroscopy (EIS) analysis, the fabrication process of the immunosensor is successful. Under the optimal conditions, the ECL intensity decreased linearly with the logarithm of PSA concentration in the range of 1 pg/mL ~ 10 ng/mL. The detection limit achieved is 0.29 pg/mL. The immunosensor results were validated through the detection of PSA in serum samples with satisfactory results. Due to excellent stability, high sensitivity, acceptable repeatability and selectivity, the immunosensor has promising applications in disease and drug analysis.

Synthesis and sensing applications of polyaniline nanocomposites: a review

A comprehensive review on the synthesis of PANI nanocomposites and their applications as gas sensors and biosensors has been presented.

An antifouling electrochemical immunosensor for carcinoembryonic antigen based on hyaluronic acid doped conducting polymer PEDOT

A sensitive and antifouling electrochemical CEA immunosensor was developed based on PEDOT doped with hyaluronic acid.

A reusable electrochemical immunosensor fabricated using a temperature-responsive polymer for cancer biomarker proteins

In the present study, we describe a reusable electrochemical immunosensor for the repeated detection of cancer biomarkers using a single platform. The integration of a temperature-responsive polymer on the electrode surface enables easy manipulation of the biological sensing interface (i.e., addition of biotin, streptavidin, and antibody), thus allowing for temperature-induced regeneration and disruption of the interface architecture of the electrode surface. Using our immunosensor, we demonstrate sequential amperometric detection of three tumor markers: CA125, CEA, and PSA. Interestingly, greatly amplified signals are achieved by immersing the immunosensor in a solution of horseradish peroxidase (HRP) and antibody-labeled nanoparticles, resulting in a linear range of 0.0064 to 256 U/mL, 1 pg/mL to 100 ng/mL, and 10 pg/mL to 10 ng/mL with a detection limit of 0.007 U/mL, 0.7 pg/mL, and 0.9 pg/mL for CA125, CEA, and PSA, respectively. By alternating temperature, the immunosensor adsorbs and desorbs the biological elements without damage. Our proposed methodology can be expanded to measure other relevant biological species by repeated detection and thus has enormous potential for industrial and clinical applications.

A fluorescence active gold nanorod–quantum dot core–satellite nanostructure for sub-attomolar tumor marker biosensing

The accurate monitoring of trace cancer biomarkers is crucial for the early diagnosis of cancer.

Rational design of Au nanorods assemblies for highly sensitive and selective SERS detection of prostate specific antigen

A simple SERS immunosensor based on AuNRs assembly was developed for rapid detection of specific antigen in early diagnostics.

Label-free electrochemical detection of prostate-specific antigen based on nucleic acid aptamer

We report a label-free aptasensor to make direct detection of prostate specific antigen (PSA, a biomarker of prostate cancer) using a quinone-containing conducting copolymer acting as redox transducer and grafting matrix for immobilization of the short aptamer strands. It is shown that capture of PSA generates a current decrease (signal-off) measured by Square Wave Voltammetry. This current decrease is specific for PSA above a limit of quantification in the ng mL(-1) range. The change in current is used to determine the PSA-aptamer dissociation constant K(D), of ca. 2.6 nM. To consolidate the proof of concept, a heterogeneous competitive exchange with a complementary DNA strand which breaks PSA-aptamer interactions is studied. This double-check followed by a current increase provides full assurance of a perfectly specific recognition.

Facile and rapid synthesis of Pd nanodendrites for electrocatalysis and surface-enhanced Raman scattering applications

Numerous properties from metal nanostructures can be tuned by controlling both their size and shape. In particular, the latter is extremely important because the type of crystalline surface affects the surface electronic density. This paper describes a simple approach to the synthesis of highly-structured, anisotropic palladium nanostructured dendrites. They were obtained using an eco-friendly biomolecule 5-hydroxytryptophan, which acts as both a reducing and stabilizing agent. The growth mechanism is proposed for the evolution of dendrites morphology. It was found that the concentration of 5-hydroxytryptophan played a vital role on the morphology of the nanostructured Pd dendrites. This nanomaterial shows enhanced electrocatalytic performance towards the oxidation of formic acid, and it exhibits surface-enhanced Raman scattering properties towards the prostate specific antigen. These properties may be explored in fuel cells and biosensors, respectively.

Recent progress in prostate-specific antigen and HIV proteases detection

Proteases mediate a wide variety of biological events and have a critical role in the development of many diseases. Protease detection methods can be hindered by the limitation of assay safety, sensitivity, specificity, time constraints and ease of on-site analysis. Notably, the implementation of various detection methods on biosensing platforms translates them into practical biosensing applications. Currently, the detection of prostate cancer and AIDS at the earliest occasion is one of the major research obstacles. Therefore, recent advances focus on the development of portable detection systems toward point-of-care testing. These detection systems should be highly sensitive and specific for the detection of their prognostic biomarkers, such as the prostate-specific antigen and HIV load assay for prostate cancer and AIDS, respectively. These methods will also facilitate decision-making on a treatment regimen.

Improved immobilization of DNA to graphite surfaces, using amino acid modified clays

A nano-sized biosensor containing valine amino acid organo-modified Cloisite as a bionanohybrid film for immobilization of DNA was developed.