Platinum complexes with aggregation-induced emission

Transition metal-containing materials with aggregation-induced emission (AIE) have brought new opportunities for the development of biological probes, optoelectronic materials, stimuli-responsive materials, sensors, and detectors. Coordination compounds containing the platinum metal have emerged as a promising option for constructing effective AIE platinum complexes. In this review, we classified AIE platinum complexes based on the number of ligands. We focused on the development and performance of AIE platinum complexes with different numbers of ligands and discussed the impact of platinum ion coordination and ligand structure variation on the optoelectronic properties. Furthermore, this review analyzes and summarizes the influence of molecular geometries, stacking models, and aggregation environments on the optoelectronic performance of these complexes. We provided a comprehensive overview of the AIE mechanisms exhibited by various AIE platinum complexes. Based on the unique properties of AIE platinum complexes with different numbers of ligands, we systematically summarized their applications in electronics, biological fields, etc. Finally, we illustrated the challenges and opportunities for future research on AIE platinum complexes, aiming at giving a comprehensive summary and outlook on the latest developments of functional AIE platinum complexes and also encouraging more researchers to contribute to this promising field.

Highly red-emissive salen–indium complexes: impact of 4-amino-substitution on the photophysical properties

4-NR2-appended salen–indium complexes were prepared via a one-pot synthetic pathway. The complexes exhibited narrow-bandwidth red emissions with high photoluminescence quantum yields that are the highest among the reported salen-based luminophores.

Red Room-Temperature Phosphorescence of CDs@Zeolite Composites Triggered by Heteroatoms in Zeolite Frameworks

Carbon dots (CDs) with red-emitting room-temperature phosphorescence (RTP) are rarely reported because of the increasing nonradiative decay of the excited states and the decreasing energy gap between the excited states and ground states. Herein, we demonstrate a facile strategy for modulating the RTP properties of CDs in terms of donor-acceptor energy transfer (EnT) in the CDs-in-zeolite system. Upon tuning of the heteroatoms (Zn²⁺, Mn²⁺) doped in the aluminophosphate zeolite frameworks, CDs@zeolite composites with green and red phosphorescence have been prepared via in situ hydrothermal synthesis. In such composites, the zeolite matrix provides an efficient confinement role in stabilizing the triplet states of CDs. Significantly, the Mn-doped zeolite could act as an energy acceptor allowing EnT from excitons of CDs to the dopant in the host matrix, generating the intriguing red RTP behavior. This work provides an effective strategy for developing CD-based composite materials with special RTP emissions as well as new fields for applications.

New red-emitting Schiff base chelates: promising dyes for sensing and imaging of temperature and oxygen via phosphorescence decay time

New complexes of Zn(ii), Pd(ii) and Pt(ii) with Schiff bases are prepared in a one-step condensation of 4-(dibutylamino)-2-hydroxybenzaldehyde and 4,5-diaminophthalonitrile in the presence of a metal salt. The complexes possess efficient absorption in the blue-green part of the spectrum with molar absorption coefficients up to 98 000 M-1 cm-1. The Pt(ii) complex shows very strong red phosphorescence in anoxic solutions at room temperature with a quantum yield of 65% in toluene which places it among the brightest emitters available for this spectral range. The phosphorescence of the Pd(ii) complex under the same conditions is very weak (Φ < 1%) but is enhanced to Φ > 10% upon immobilization into polymers. Optical thermometers based on self-referenced lifetime read-out are prepared upon immobilization of the dyes into gas-blocking poly(vinylidene chloride-co-acrylonitrile). At 25 °C, the materials based on Pd(ii) and Pt(ii) complexes show sensitivities of -2.1 and -0.52%τ/K, respectively. Application of the sensors for imaging of temperature on surfaces (planar optode) and for monitoring of fast temperature fluctuations (fiber-optic microsensor) is demonstrated. Immobilized into a gas-permeable matrix, the Pt(ii) complex also performs as a promising oxygen-sensing material. The new systems are also attractive for imaging of oxygen or temperature with the help of multi-photon microscopy, due to a good match with the biological optical window and much better brightness under two photon excitation compared to that of the conventional Pt(ii) meso-tetra-(pentafluorophenyl)porphyrin.

Synthesis and Guest Recognition of Switchable Pt-Salphen Based Molecular Tweezers

Molecular tweezers are artificial receptors that have an open cavity generated by two recognition units pre-organized by a spacer. Switchable molecular tweezers, using a stimuli-responsive spacer, are particularly appealing as prototypes of the molecular machines that combine mechanical motion and allosteric recognition properties. In this present study, the synthesis of switchable molecular tweezers composed of a central terpyridine unit substituted in 4,4″ positions by two Pt(II)-salphen complexes is reported. The terpyridine ligand can be reversibly converted upon Zn(II) coordination from a free ‘U’-shaped closed form to a coordinated ‘W’ open form. This new substitution pattern enables a reverse control of the mechanical motion compared to the previously reported 6,6″ substituted terpyridine-based tweezers. Guest binding studies with aromatic guests showed an intercalation of coronene in the cavity created by the Pt-salphen moieties in the closed conformation. The formation of 1:1 host-guest complex was investigated by a combination of NMR studies and DFT calculations.

Cyclometalated Pt(ii) complexes with a bidentate Schiff-base ligand displaying unexpected cis/trans isomerism: synthesis, structures and electronic properties

Unexpected cis/trans isomerism in a bis-cyclometalated Pt(ii) complex is investigated by NMR, X-ray diffraction, optical, electrochemical and computational methods and rationalized.

Syntheses, photoluminescence and electroluminescence of two novel platinum(ii) complexes

Highly efficient green OLEDs based on two platinum complexes showed a peak current efficiency of 48.3 cd A⁻¹ with low efficiency roll-off; and even at a brightness of 1000 cd m⁻², a current efficiency of 47.0 cd A⁻¹ could still be obtained.

Excited-State Intramolecular Proton-Transfer Properties of Three Tris(N-Salicylideneaniline)-Based Chromophores with Extended Conjugation

The synthesis and photophysical properties of three tris(N-salicylideneaniline) (TSA) compounds containing 1,3,5-triarylbenzene, -tristyrylbenzene, and -tris(arylethynyl)benzene core units are reported. The TSA compounds underwent efficient excited-state intramolecular proton transfer (ESIPT) in solution and in solid state due to the preformed C=N⋅⋅⋅H-O hydrogen-bonded motifs of the structures. Steady-state fluorescence emission spectra of the TSA molecules revealed dual bands only in DMSO, and large Stokes shifts in other polar aprotic and protic solvents. Femtosecond transient absorption spectroscopic measurements in THF revealed lifetime values in the range of 14-16 ps for the excited-state keto-tautomer. The TSA compounds are also responsive to metal ions (Cu²⁺ and Zn²⁺ ) in DMSO, exhibit enhanced aggregate-induced emission (AIE) properties in DMSO/water mixtures, and are highly luminescent in the solid state.

Highly phosphorescent platinum(ii) emitters: photophysics, materials and biological applications

In recent years a blossoming interest in the synthesis, photophysics and application of phosphorescent Pt(ii) complexes, particularly on their uses in bioimaging, photocatalysis and phosphorescent organic light-emitting diodes (OLEDs), has been witnessed. The superior performance of phosphorescent Pt(ii) complexes in these applications is linked to their diverse spectroscopic and photophysical properties, which can be systematically modulated by appropriate choices of auxiliary ligands. Meanwhile, an important criterion for the practical application of phosphorescent metal complexes is their stability which is crucial for biological utilization and industrial OLED applications. Taking both the luminescence properties and stability into consideration, chelating ligands having rigid scaffolds and with strong σ-donor atoms are advantageous for the construction of highly robust phosphorescent Pt(ii) complexes. The square-planar coordination geometry endows Pt(ii) complexes with the intriguing spectroscopic and photophysical properties associated with their intermolecular interactions in both the ground and excited states. In this article, we discuss the design and synthesis of phosphorescent Pt(ii) complexes with elaboration on the effects of ligands on the structure and luminescence properties. Based on their photophysical and emission properties, we intend to shed light on the great promise of highly robust phosphorescent Pt(ii) emitters in an array of applications from molecular materials to biosensors.

Heteroleptic Ir(iii) and Pt(ii) complexes based on 2-(2,4-difluorophenyl)-pyridine and bisthienylethene BrLH: the influence of the metal center on structures, luminescence and photochromism

Based on bisthienylethene BrLH, [Ir(dfppy)₂(BrL)]·3CH₃OH (1) and [Pt(dfppy)(BrL)]·CH₃OH (2) have been prepared. The two complexes are significantly different in structure, luminescence and photochromic behavior, due to their different metal centers.

Theoretical and experimental studies on three new coordination complexes of Co(II), Ni(II), and Cu(II) with 2,4-dichloro-6-{(E)-[(5-chloro-2 sulfanylphenyl)imino]methyl}phenol Schiff base ligand

Three mononuclear coordination complexes of Co(II), Ni(II), and Cu(II) have been synthesized from 2,4-dichloro-6-{(E)-[(5-chloro-2-sulfanylphenyl)imino]methyl}phenol ligand (H 2 L) obtained by simple condensation reaction of 3,5-dichloro-2-hydroxybenzaldehyde and 2-amino-4-chlorobenzenethiol and characterized by elemental analysis, spectral (FT-IR, electronic, and (1)H-NMR), molar conductance, thermal, SEM, PXRD, and fluorescence studies. The PXRD analysis and SEM-EDX micrographs show the crystalline nature of complexes. The domain size and the lattice strain of synthesized compounds have been determined according to Williamson-Hall plot. TG of the synthesized complexes illustrates the general decomposition pattern of the complexes. The ligand exhibits an interesting fluorescence property which is suppressed after complex formation. The Co(II) complex adopted a distorted octahedral configuration while Ni(II) and Cu(II) complexes showed square planar geometry around metal center. The geometry optimization, HOMO-LUMO, molecular electrostatic potential map (MEP), and spin density of synthesized compounds have been performed by density functional theory (DFT) method using B3LYP/6-31G and B3LYP/LANL2DZ as basis set. Graphical abstract Three new coordination complexes of Co(II), Ni(II) and Cu(II) with 2,4-dichloro-6-{(E)-[(5-chloro-2 sulfanylphenyl)imino]methyl}phenol Schiff base ligand.

Functionalization of phosphorescent emitters and their host materials by main-group elements for phosphorescent organic light-emitting devices

Phosphorescent organic light-emitting devices (OLEDs) have attracted increased attention from both academic and industrial communities due to their potential practical application in high-resolution full-color displays and energy-saving solid-state lightings. The performance of phosphorescent OLEDs is mainly limited by the phosphorescent transition metal complexes (such as iridium(III), platinum(II), gold(III), ruthenium(II), copper(I) and osmium(II) complexes, etc.) which can play a crucial role in furnishing efficient energy transfer, balanced charge injection/transporting character and high quantum efficiency in the devices. It has been shown that functionalized main-group element (such as boron, silicon, nitrogen, phosphorus, oxygen, sulfur and fluorine, etc.) moieties can be incorporated into phosphorescent emitters and their host materials to tune their triplet energies, frontier molecular orbital energies, charge injection/transporting behavior, photophysical properties and thermal stability and hence bring about highly efficient phosphorescent OLEDs. So, in this review, the recent advances in the phosphorescent emitters and their host materials functionalized with various main-group moieties will be introduced from the point of view of their structure-property relationship. The main emphasis lies on the important role played by the main-group element groups in addressing the key issues of both phosphorescent emitters and their host materials to fulfill high-performance phosphorescent OLEDs.

Yellow/orange emissive heavy-metal complexes as phosphors in monochromatic and white organic light-emitting devices

Owing to the electron spin-orbit coupling (SOC) and fast intersystem crossing (ISC), heavy-metal complexes (such as iridium(III), platinum(II) and osmium(II) complexes, etc.) are phosphorescent emitters at room temperature. Since 1998, heavy-metal complexes as phosphors have received considerable academic and industrial attention in the field of organic light-emitting diodes (OLEDs), because they can harvest both the singlet (25%) and triplet (75%) excitons for emission during the electro-generated processes. Among all the visible colors (blue, green, yellow, orange and red), the yellow/orange heavy-metal complexes play an important role for realizing full-color OLEDs as well as high-efficiency white OLEDs, and thus the development of highly efficient yellow/orange heavy-metal complexes is a pressing concern. In this article, we will review the progress on yellow/orange heavy-metal complexes as phosphors in OLEDs. The general principles and useful tactics for designing the yellow/orange heavy-metal complexes will be systematically summarized. The structure-property relationship and electrophosphorescence performance of the yellow/orange heavy-metal complexes in monochromatic phosphorescent OLEDs (PhOLEDs) and white OLEDs (WOLEDs) will be comprehensively surveyed and discussed.

Substitutional group dependent colori/fluorimetric sensing of Mn(2+), Fe(3+) and Zn(2+) ions by simple Schiff base chemosensor

Schiff base is one of the easiest synthesizable chemosensor and exhibit strong coordination with metal ions; the property that has been vastly exploited for metal ions sensing. Simple Schiff base chemosensors (1a-d and 2a-d) were synthesized and demonstrated substitutional group dependent colorimetric sensing of metal ions. Chemosensor without (1a, 2a) and OCH3 substitution (1b, 2b) did not show any significant colour change for metal ions. However, a highly selective colorimetric change (colourless to pink) for Mn(2+) ions (10(-6)M) was observed with diethylamine substituted 1c, 2c. Hydroxyl substitution (1d, 2d) leads to selective colorimetric sensing (colourless to orange) of Fe(3+) ions (10(-6)M). PVA thin films of 2c/2d were fabricated and demonstrated selective colorimetric sensing of Mn(2+) and Fe(3+) ions. The practical applicability of the synthesized chemosensors were also demonstrated by performing selective colorimetric sensing of Mn(2+) and Fe(3+) ions in real samples such as tap, ground, pond and river water. Effect of substitution on the fluorescence selectivity of Zn(2+) has also been investigated.

Luminescent Pt(ii) complexes bearing dual isoquinolinyl pyrazolates: fundamentals and applications

Pt(ii) complex [Pt(Lx)₂], LxH = 6-t-butyl-1-(3-trifluoromethyl-1H-pyrazol-5-yl) isoquinoline, with three colored morphologies can be interconverted by grinding and/or wetting with solvents.

Functionalized Salen ligands linking with non-conjugated bridges: unique and colorful aggregation-induced emission, mechanism, and applications

A series of novel, simple, and useful Salen ligands (56 samples) linking with different non-conjugated alkyl bridges have a small π-conjugated system but exhibit strong red, green, and blue AIE.

Terpy(Pt-salphen)2 switchable luminescent molecular tweezers

The design and synthesis of switchable molecular tweezers based on a luminescent terpy(Pt-salphen)2 (1; terpy=terpyridine) complex is reported. Upon metal coordination, the tweezers can switch from an open "W"-shaped conformation to a closed "U"-shaped form that is adapted for selective recognition of cations. Closing of the tweezers by metal coordination (M=Zn(2+), Cu(2+), Pb(2+), Fe(2+), Hg(2+)) was monitored by (1)H NMR and/or UV/Vis titrations. During the titration, exclusive formation of the 1:1 complex [M(1)] was observed, without appearance of an intermediate 1:2 complex [M(1)2]. The crystallographic structure of the 1:1 complex was obtained with Pb(2+) and showed a distorted helical structure. Selective intercalation of Hg(2+) cations by the closed "U" form was observed. The tweezers were reopened by selective metal decoordination of the terpyridine ligand by using tris(2-aminoethyl)amine (tren) as a competitive ligand without modification of the Pt-salphen complex. Detailed photophysical studies were performed on the open and closed tweezers. Structured emission was observed in the open form from the Pt-salphen moieties, with a high quantum yield and a long lifetime. The emission is slightly modified upon closing with 1 equivalent of Zn(2+) or Hg(2+), whereas a dramatic quenching was obtained upon intercalation of additional Hg(2+).

Optical chemosensors based on transmetalation of salen-based Schiff base complexes

We report our systematic studies of novel, simple, selective, and sensitive optical (both colorimetric and fluorescent) chemosensors for detecting Al(3+) based on transmetalation reactions (metal displacement or exchange reactions) of a series of K(I), Ca(II), Zn(II), Cu(II), and Pt(II) complexes containing different ligands of salen-based Schiff bases. Both the chemical structure of the salen ligand and the identity of the central metal ion have a tremendous impact on the sensing performance, which is mainly determined by the stability constant of the complex. Moreover, the selectivities of the salen-complex-based chemosensors are much better than those of the corresponding free salen ligands because of the shielding function of the filled-in metal ion in the complex. Therefore, the present work potentially provides a new and simple way to design optical probes via complex-based transmetalation reactions.

Straightforward access to mono- and bis-cycloplatinated helicenes that display circularly polarized phosphorescence using crystallization resolution methods

Enantiopure mono-cycloplatinated-[8]helicene and bis-cycloplatinated-[6]helicene derivatives were prepared through column chromatography combined with crystallization of diastereomeric complexes using a chiral ancillary sulfoxide ligand. The UV-visible spectra, circular dichroism, molar rotations, and (circularly polarized) luminescence activity of these new helical complexes have been examined in detail and analysed with the help of first-principles quantum-chemical calculations.